The Y-family DNA polymerase Dpo4 uses a template slippage mechanism to create single-base deletions

The Y-family polymerases help cells tolerate DNA damage by performing translesion synthesis, yet they also can be highly error prone. One distinctive feature of the DinB class of Y-family polymerases is that they make single-base deletion errors at high frequencies in repetitive sequences, especially those that contain two or more identical pyrimidines with a 5' flanking guanosine. Intriguingly, different deletion mechanisms have been proposed, even for two archaeal DinB polymerases that share 54% sequence identity and originate from two strains of Sulfolobus. To reconcile these apparent differences, we have characterized Dpo4 from Sulfolobus solfataricus using the same biochemical and crystallographic approaches that we have used previously to characterize Dbh from Sulfolobus acidocaldarius. In contrast to previous suggestions that Dpo4 uses a deoxynucleoside triphosphate (dNTP)-stabilized misalignment mechanism when creating single-base deletions, we find that Dpo4 predominantly uses a template slippage deletion mechanism when replicating repetitive DNA sequences, as was previously shown for Dbh. Dpo4 stabilizes the skipped template base in an extrahelical conformation between the polymerase and the little-finger domains of the enzyme. This contrasts with Dbh, in which the extrahelical base is stabilized against the surface of the little-finger domain alone. Thus, despite sharing a common deletion mechanism, these closely related polymerases use different contacts with the substrate to accomplish the same result.     

Minor groove interactions at the DNA polymerase beta active site modulate single-base deletion error rates

The structures of open and closed conformations of DNA polymerase beta (pol beta) suggests that the rate of single-nucleotide deletions during synthesis may be modulated by interactions in the DNA minor groove that align the templating base with the incoming dNTP. To test this hypothesis, we measured the single-base deletion error rates of wild-type pol beta and lysine and alanine mutants of Arg(283), whose side chain interacts with the minor groove edge of the templating nucleotide at the active site. The error rates of both mutant enzymes are increased >100-fold relative to wild-type pol beta. Template engineering experiments performed to distinguish among three possible models for deletion formation suggest that most deletions in repetitive sequences by pol beta initiate by strand slippage. However, pol beta also generates deletions by a different mechanism that is strongly enhanced by the substitutions at Arg(283). Analysis of error specificity suggests that this mechanism involves nucleotide misinsertion followed by primer relocation, creating a misaligned intermediate. The structure of pol beta bound to non-gapped DNA also indicates that the templating nucleotide and its downstream neighbor are out of register in the open conformation and this could facilitate misalignment (dNTP or primer terminus) with the next template base.     

Conformational changes during normal and error-prone incorporation of nucleotides by a Y-family DNA polymerase detected by 2-aminopurine fluorescence

Y-family polymerases are specialized to carry out DNA synthesis past sites of DNA damage. Their active sites make fewer contacts to their substrates, consistent with the remarkably low fidelity of these DNA polymerases when copying undamaged DNA. We have used DNA containing the fluorescent reporter 2-aminopurine (2-AP) to study the reaction pathway of the Y-family polymerase Dbh. We detected 3 rapid noncovalent steps between binding of a correctly paired dNTP and the rate-limiting step for dNTP incorporation. These early steps resemble those seen with high-fidelity DNA polymerases, such as Klenow fragment, and include a step that may be related to the unstacking of the 5' neighbor of the templating base that is seen in polymerase ternary complex crystal structures. A significant difference between Dbh and high-fidelity polymerases is that Dbh generates no fluorescence changes subsequent to dNTP binding if the primer lacks a 3'OH, suggesting that the looser active site of Y-family polymerases may enforce reliance on the correct substrate structure in order to assemble the catalytic center. Dbh, like other bypass polymerases of the DinB subgroup, generates single-base deletion errors at an extremely high frequency by skipping over a template base that is part of a repetitive sequence. Using 2-AP as a reporter to study the base-skipping process, we determined that Dbh uses a mechanism in which the templating base slips back to pair with the primer terminus while the base that was originally paired with the primer terminus becomes unpaired.     

The mutational specificity of the Dbh lesion bypass polymerase and its implications

The Dbh polymerase of Sulfolobus solfataricus is a member of the recently described family of low fidelity DNA polymerases involved in bypass of DNA lesions. To investigate the enzymatic properties of Dbh, we characterized the errors made by this polymerase in vitro. Not only is Dbh much less accurate than the "classical" polymerases, but it showed a remarkable tendency to skip over a template pyrimidine positioned immediately 3' to a G residue, generating a single-base deletion. Single-turnover kinetic measurements suggest possible mechanisms. First, Dbh shows a bias in favor of dCTP, such that the rate of incorporation of dCTP opposite a template G is about 10-fold faster than for the other three dNTPs opposite their complementary partners. On a DNA substrate corresponding to a frameshift hotspot, the rate of frameshift insertion of dCTP opposite a template G that is one residue 5' to the expected templating position is approximately equal to the rate of the non-frameshifted C-dGTP insertion. We suspect that the unusual mutational specificity of Dbh (which is shared with other polymerases from the DinB branch of the bypass polymerase family) may be related to the type of DNA lesion(s) that it serves to bypass in vivo.     

Polymerase-specific differences in the DNA intermediates of frameshift mutagenesis. In vitro synthesis errors of Escherichia coli DNA polymerase I and its large fragment derivative

The sequences of more than 600 frameshift mutations produced as a consequence of in vitro DNA replication on an oligonucleotide-primed, single-stranded DNA template by the Escherichia coli polymerase I enzyme (PolI) or its large fragment derivative (PolLF) were compared. Four categories of mutants were found: (1) single-base deletions, (2) base substitutions, (3) multiple-base deletions and (4) complex frameshift mutations that change both the base sequence and the number of bases in a concerted mutational process. The template sequence 5'-Py-T-G-3', previously identified as a PolLF hotspot for single-base deletions opposite G, is also a hotspot for PolI. A PolI-specific warm spot for single-base deletions was identified. Among base substitutions, transitions were more frequent than transversions. Transversions were mediated by (template)G.G, (template)G.A, and (template)C.T mispairs. Multiple-base deletions were found only after PolI replication. Although each of these deletions can be explained by a misalignment mediated by directly repeated DNA sequences, deletion frequencies were often different for repeats of the same length. Both PolI and PolLF produced many complex frameshift mutants. The new sequences at the mutant sites are exactly complementary to nearby DNA sequences in the newly synthesized DNA strand. In each case, palindromic complementarity could mediate the misalignment needed to initiate the mutational process. The misaligned DNA synthesis accounts for the nucleotide changes at the mutant site and for homology that could direct realignment of the DNA onto the template. Most of the complex mutant sequences could be initiated by either intramolecular misalignments involving fold-back structures in newly synthesized DNA or by strand-switching during strand-displacement synthesis. The striking differences between the specificities of complex frameshift mutations and multiple-base deletions by PolI and PolLF identify the existence of polymerase-specific determinants that influence the frequency and specificity of misalignment-mediated frameshifts and deletions.     

Efficient extension of slipped DNA intermediates by DinB is required to escape primer template realignment by DnaQ

We show that Escherichia coli DinB polymerase, which creates single-base deletions, prefers to extend slipped DNA substrates with the skipped base at the -4 position. A DinB(Y79L) variant, which extends these substrates less efficiently in vitro, allows the proofreading function of polymerase III to reverse their formation in vivo.     

Investigating the role of the little finger domain of Y-family DNA polymerases in low fidelity synthesis and translesion replication

Dpo4 and Dbh are Y-family polymerases that originate from two closely related strains of Sulfolobaceae. Quite surprisingly, however, the two polymerases exhibit different enzymatic properties in vitro. For example, Dpo4 can replicate past a variety of DNA lesions, yet Dbh does so with a much lower efficiency. When replicating undamaged DNA, Dpo4 is prone to make base pair substitutions, whereas Dbh predominantly makes single-base deletions. Overall, the two proteins are 54% identical, but the greatest divergence is found in their respective little finger (LF) domains, which are only 41% identical. To investigate the role of the LF domain in the fidelity and lesion-bypassing abilities of Y-family polymerases, we have generated chimeras of Dpo4 and Dbh in which their LF domains have been interchanged. Interestingly, by replacing the LF domain of Dbh with that of Dpo4, the enzymatic properties of the chimeric enzyme are more Dpo4-like in that the enzyme is more processive, can bypass an abasic site and a thymine-thymine cyclobutane pyrimidine dimer, and predominantly makes base pair substitutions when replicating undamaged DNA. The converse is true for the Dpo4-LF-Dbh chimera, which is more Dbh-like in its processivity and ability to bypass DNA adducts and generate single-base deletion errors. Our studies indicate that the unique but variable LF domain of Y-family polymerases plays a major role in determining the enzymatic and biological properties of each individual Y-family member.     

The properties of steric gate mutants reveal different constraints within the active sites of Y-family and A-family DNA polymerases

Y-family (lesion-bypass) DNA polymerases show the same overall structural features seen in other members of the polymerase superfamily, yet their active sites are more open, with fewer contacts to the DNA and nucleotide substrates. This raises the question of whether analogous active-site side chains play equivalent roles in the bypass polymerases and their classical DNA polymerase counterparts. In Klenow fragment, an A-family DNA polymerase, the steric gate side chain (Glu710) not only prevents ribonucleotide incorporation but also plays an important role in discrimination against purine-pyrimidine mispairs. In this work we show that the steric gate (Phe12) of the Y-family polymerase Dbh plays a very minor role in fidelity, despite its analogous role in sugar selection. Using ribonucleotide discrimination to report on the positioning of a mispaired dNTP, we found that the pyrimidine of a Pu-dPyTP nascent mispair occupies a similar position to that of a correctly paired dNTP in the Dbh active site, whereas in Klenow fragment the mispaired dNTP sits higher in the active site pocket. If purine-pyrimidine mispairs adopt the expected wobble geometry, the difference between the two polymerases can be attributed to the binding of the templating base, with the looser binding site of Dbh permitting a variety of template conformations with only minimal adjustment at the incoming dNTP. In Klenow fragment the templating base is more rigidly held, so that changes in base pair geometry would affect the dNTP position, allowing the Glu710 side chain to serve as a sensor of nascent mispairs.     

A thymine isostere in the templating position disrupts assembly of the closed DNA polymerase beta ternary complex

The high fidelity of the DNA polymerization process is critically important for the stability of the cellular genome. The role of template and incoming nucleotide base pairing in polymerase fidelity has recently been explored by the use of nucleotide isosteres, which preserve the steric but not the electronic properties of the corresponding bases. The DNA repair enzyme, DNA polymerase beta (Pol beta), is among the most discriminating, being inactive when the thymine isostere difluorotoluene (DFT) is present in the templating base position. To explore the physical basis for this inactivity, we have performed NMR studies on [methyl-13C]methionine-labeled Pol beta complexed with double-hairpin DNA, used to model the gapped nucleotide substrate, and having either a thymine or a DFT isostere at the templating base position. The six methionine residues distributed throughout the enzyme provide useful conformational probes of the lyase and polymerase domains and subdomains. Analysis of the proton shift of Met282 that results from formation of an abortive Pol beta-gapped DNA-dATP complex is consistent with an open to closed conformational change of the enzyme predicted from crystal structures. In contrast, the same resonance is nearly unshifted when a ternary complex is formed from dATP and gapped DNA in which a DFT isostere replaces thymine at the templating base position. Alternatively, the resonances of Met191 and Met155, located in the catalytic subdomain, show perturbations upon formation of the abortive ternary complex, which are qualitatively similar, but significantly weaker, than the changes observed when thymine is present at the templating base position. The changes in the Met155 and Met191 methyl resonances are in fact more similar to those observed in the binary Pol beta-dATP complex. These studies demonstrate that the block in catalysis is directly related to the absence of the set of conformational transitions that include the "open" to "closed" transition monitored by Met282.     

Mechanism of frameshift (deletion) generated by acetylaminofluorene-derived DNA adducts in vitro

We have investigated the mechanism of frameshift (deletion) mutagenesis induced by acetylaminofluorene- (AAF-) derived DNA adducts. dG-AAF-modified oligodeoxynucleotides, with different bases positioned 5' to the lesion, were annealed to (32)P-labeled 13-mer primers and then used in primer extension reactions catalyzed by the 3'-->5' exonuclease-free Klenow fragment of Escherichia coli DNA polymerase I. When the dNMP positioned opposite dG-AAF could pair with its complementary base at the 5' flanking position, single-base deletions were produced at high frequency. Similarly, when the complementary base was two positions 5' to the dG-AAF, two-base deletions occurred. The relative frequency of base insertions opposite dG-AAF followed the order dCMP > dAMP > dGMP > dTMP; the frequency of dNTP insertion opposite the lesion paralleled the formation of frameshift deletions. When a template designed to induce three-base deletions was used for translesion synthesis catalyzed by the exo(-) Klenow fragment, the expected three-base deletion was formed. When dG-AAF-modified templates containing iterated bases 5' to the lesion were annealed to primers with the complementary dNMP positioned opposite the lesion, the dNMP inserted opposite the dG-AAF tended to pair with the complementary base 5' to the lesion, thereby forming shorter deletions. Taken together, these results support the molecular mechanism for frameshift deletion proposed earlier by Shibutani and Grollman in which direct base insertion precedes misalignment [(1993) J. Biol. Chem. 268, 11703].     

Substrate-induced DNA strand misalignment during catalytic cycling by DNA polymerase lambda

The simple deletion of nucleotides is common in many organisms. It can be advantageous when it activates genes beneficial to microbial survival in adverse environments, and deleterious when it mutates genes relevant to survival, cancer or degenerative diseases. The classical idea is that simple deletions arise by strand slippage. A prime opportunity for slippage occurs during DNA synthesis, but it remains unclear how slippage is controlled during a polymerization cycle. Here, we report crystal structures and molecular dynamics simulations of mutant derivatives of DNA polymerase lambda bound to a primer-template during strand slippage. Relative to the primer strand, the template strand is in multiple conformations, indicating intermediates on the pathway to deletion mutagenesis. Consistent with these intermediates, the mutant polymerases generate single-base deletions at high rates. The results indicate that dNTP-induced template strand repositioning during conformational rearrangements in the catalytic cycle is crucial to controlling the rate of strand slippage.     

The frameshift infidelity of human DNA polymerase lambda. Implications for function

DNA polymerase lambda (Pol lambda) is a member of the Pol X family having properties in common with several other mammalian DNA polymerases. To obtain clues to possible functions in vivo, we have determined the fidelity of DNA synthesis by human Pol lambda. The results indicate that the average single-base deletion error rate of Pol lambda is higher than those of other mammalian polymerases. In fact, unlike other DNA polymerases, Pol lambda generates single-base deletions at average rates that substantially exceed base substitution rates. Moreover, the sequence specificity for single-base deletions made by Pol lambda is different from that of other DNA polymerases and reveals that Pol lambda readily uses template-primers with limited base pair homology at the primer terminus. This ability, together with an ability to fill short gaps in DNA at low dNTP concentrations, is consistent with a role for mammalian Pol lambda in non-homologous end-joining. This may include non-homologous end-joining of strand breaks resulting from DNA damage, because Pol lambda has intrinsic 5',2'-deoxyribose-5-phosphate lyase activity.     

Three Residues of the Interdomain Linker Determine the Conformation and Single-base Deletion Fidelity of Y-family Translesion Polymerases

Dpo4 and Dbh are from two closely related Sulfolobus species and are well studied archaeal homologues of pol IV, an error prone Y-family polymerase from Escherichia coli. Despite sharing 54% amino acid identity, these polymerases display distinct mutagenic and translesion specificities. Structurally, Dpo4 and Dbh adopt different conformations because of the difference in relative orientation of their N-terminal catalytic and C-terminal DNA binding domains. Using chimeric constructs of these two polymerases, we have previously demonstrated that the interdomain linker is a major determinant of polymerase conformation, base-substitution fidelity, and abasic-site translesion synthesis. Here we find that the interdomain linker also affects the single-base deletion frequency and the mispair extension efficiency of these polymerases. Exchanging just three amino acids in the linkers of Dbh and Dpo4 is sufficient to change the fidelity by up to 30-fold, predominantly by altering the rate of correct (but not incorrect) nucleotide incorporation. Additionally, from a 2.4 Å resolution crystal structure, we have found that the three linker amino acids from Dpo4 are sufficient to allow Dbh to adopt the standard conformation of Dpo4. Thus, a small region of the interdomain linker, located more than 11 Å away from the catalytic residues, determines the fidelity of these Y-family polymerases, by controlling the alignment of substrates at the active site.     

The mutational specificity of DNA polymerase-beta during in vitro DNA synthesis. Production of frameshift, base substitution, and deletion mutations

The frequency and specificity of mutations produced in vitro by eucaryotic DNA polymerase-beta have been determined in a forward mutation assay using a 250-base target sequence in M13mp2 DNA. Homogeneous DNA polymerase-beta, isolated from four different sources, produces mutations at a frequency of 4-6%/single round of gap-filling DNA synthesis. DNA sequence analyses of 460 independent mutants resulting from this error-prone DNA synthesis demonstrate a wide variety of mutational events. Frameshift and base substitutions are made at approximately equal frequency and together comprise about 90% of all mutations. Two mutational "hot spots" for frameshift and base substitution mutations were observed. The characteristics of the mutations at these sites suggest that certain base substitution errors result from dislocation of template bases rather than from direct mispair formation by DNA polymerase-beta. When considering the entire target sequence, single-base frameshift mutations occur primarily in runs of identical bases, usually pyrimidines. The loss of a single base occurs 20-80 times more frequently than single-base additions and much more frequently than the loss of two or more bases. Base substitutions occur at many sites throughout the target, representing a wide spectrum of mispair formations. Averaged over a large number of phenotypically detectable sites, the base substitution error frequency is greater than one mistake for every 5000 bases polymerized. Large deletion mutations are also observed, at a frequency more than 10-fold over background, indicating that purified DNA polymerases alone are capable of producing such deletions. These data are discussed in relation to the physical and kinetic properties of the purified enzymes and with respect to the proposed role for this DNA polymerase in vivo.     

Human DNA polymerase iota utilizes different nucleotide incorporation mechanisms dependent upon the template base

Human DNA polymerase ι (Polι) is a member of the Y family of DNA polymerases involved in translesion DNA synthesis. Polι is highly unusual in that it possesses a high fidelity on template A, but has an unprecedented low fidelity on template T, preferring to misincorporate a G instead of an A. To understand the mechanisms of nucleotide incorporation opposite different template bases by Polι, we have carried out pre-steady-state kinetic analyses of nucleotide incorporation opposite templates A and T. These analyses have revealed that opposite template A, the correct nucleotide is preferred because it is bound tighter and is incorporated faster than the incorrect nucleotides. Opposite template T, however, the correct and incorrect nucleotides are incorporated at very similar rates, and interestingly, the greater efficiency of G misincorporation relative to A incorporation opposite T arises predominantly from the tighter binding of G. Based on these results, we propose that the incipient base pair is accommodated differently in the active site of Polι dependent upon the template base and that when T is the templating base, Polι accommodates the wobble base pair better than the Watson-Crick base pair.     

DNA Polymerase �� Substrate Specificity: SIDE CHAIN MODULATION OF THE ��A-RULE��*

Apurinic/apyrimidinic (AP) sites are continuously generated in genomic DNA. Left unrepaired, AP sites represent noninstructional premutagenic lesions that are impediments to DNA synthesis. When DNA polymerases encounter an AP site, they generally insert dAMP. This preferential insertion is referred to as the A-rule. Crystallographic structures of DNA polymerase (pol) β, a family X polymerase, with active site mismatched nascent base pairs indicate that the templating (i.e. coding) base is repositioned outside of the template binding pocket thereby diminishing interactions with the incorrect incoming nucleotide. This effectively produces an abasic site because the template pocket is devoid of an instructional base. However, the template pocket is not empty; an arginine residue (Arg-283) occupies the space vacated by the templating nucleotide. In this study, we analyze the kinetics of pol β insertion opposite an AP site and show that the preferential incorporation of dAMP is lost with the R283A mutant. The crystallographic structures of pol β bound to gapped DNA with an AP site analog (tertrahydrofuran) in the gap (binary complex) and with an incoming nonhydrolyzable dATP analog (ternary complex) were solved. These structures reveal that binding of the dATP analog induces a closed polymerase conformation, an unstable primer terminus, and an upstream shift of the templating residue even in the absence of a template base. Thus, dATP insertion opposite an abasic site and dATP misinsertions have common features.     

DNA Sequence Effects on Single Base Deletions Arising during DNA Polymerization in Vitro by Escherichia Coli Klenow Fragment Polymerase

Most single base deletions detected after DNA polymerization in vitro directed by either Escherichia coli DNA polymerase I or its Klenow fragment are opposite Pu in the template. The most frequent study, were previously found to be associated with the consensus template context 5'-PyTPu-3'. In this study, the predictive power of the consensus sequence on single base deletion frequencies was directly tested by parallel comparison of mutations arising in four related DNAs differing by a single base. G, a deletion hotspot within the template context 5'-TTGA-3', was substituted by each of the 3 other bases. Previous studies had shown that deletions opposite the G were frequent but that deletions opposite its neighboring A were never detected. Based on the predictions of the consensus, the substitution of T for G should produce frequent deletions opposite the neighboring A due to its new 5'-TTTA-3' template context. This prediction was fulfilled; no deletions of this A were detected in the other templates. The consensus further predicted that deletions opposite template C would be lower than those opposite either A or G at the same site and this prediction was also fulfilled. The C substitution also produced a new hotspot for 1 bp deletions 14 bp away. The new hotspot depends on quasi-palindromic misalignment of the newly synthesized DNA strand during polymerization; accurate, but ectopically templated synthesis is responsible for this mutagenesis. Mutations templated by quasi-palindromic misalignments have previously been recognized when they produced complex sequence changes; here we show that this mechanism can produce frequent single base deletions. The unique stimulation of misalignment mutagenesis by the C substitution in the template is consistent with the singular ability of C at that site to contribute to extended complementary pairing during the DNA misalignment that precedes mutagenesis.     

DNA replication errors produced by the replicative apparatus of Escherichia coli.

It has been hard to detect forward mutations generated during DNA synthesis in vitro by replicative DNA polymerases, because of their extremely high fidelity and a high background level of pre-existing mutations in the single-stranded template DNA used. Using the oriC plasmid DNA replication in vitro system and the rpsL forward mutation assay, we examined the fidelity of DNA replication catalyzed by the replicative apparatus of Escherichia coli. Upon DNA synthesis by the fully reconstituted system, the frequency of rpsL-mutations in the product DNA was increased to 1.9x10(-4), 50-fold higher than the background level of the template DNA. Among the mutations generated in vitro, single-base frameshifts predominated and occurred with a pattern similar to those induced in mismatch-repair deficient E. coli cells, indicating that the major replication error was slippage at runs of the same nucleotide. Large deletions and other structural alterations of DNA appeared to be induced also during the action of the replicative apparatus.