Nucleotide sequence analysis of the endoglucanase-encoding gene, celCCD, of Clostridium cellulolyticum

The nucleotide sequence of the Clostridium cellulolyticum endo-beta-1,4- glucanase (EGCCD)-encoding gene, celCCD, and its flanking regions, was determined. The open reading frame encodes a protein (Mr 66,061) which consists of 584 amino acids (aa). The N terminus shows the features of the typical signal peptide, with a cleavage site after Gly24. The protein could be divided into N-terminal and C-terminal regions by an intermediate Pro + Thr-rich sequence. Deletion analysis suggests the C-terminal region is not necessary for EG activity. The predicted aa sequence of the mature protein was similar to those of the central catalytic and the following C-terminal regions of the C. thermocellum endoglucanase H (EGH; identity, 58.8%). The N-terminal region resembled that of the endoglucanase, EGCCA, from C. cellulolyticum (identity, 24.7%; 336 aa) and the endoglucanase, EGE, from C. thermocellum (identity, 31.4%; 373 aa). The C-terminal regions ended with two conserved 21-aa stretches which had close similarity to each other. The C-terminal sequence was also highly similar to the reiterated domain of several EG and a xylanase from C. thermocellum, and of an EG from C. cellulolyticum.     

Conserved reiterated domains in Clostridium thermocellum endoglucanases are not essential for catalytic activity

The complete nucleotide sequence of the Clostridium thermocellum celE gene, coding for an endo-beta-1,4-glucanase (endoglucanase E; EGE) with xylan-hydrolysing activity has been determined. The structural gene consists of an open reading frame (ORF) of 2442 bp commencing with a GTG start codon and followed by a TAA stop codon. The nucleotide sequence obtained has been confirmed by comparing the predicted amino acid sequence with that derived by N-terminal amino acid sequencing of the purified protein. The EGE sequence contains a region homologous to the reiterated domain found at the C terminus of other endoglucanases from the same organism. BAL 31 deletions of the structural gene have revealed the extent to which this conserved sequence is necessary for endoglucanase and xylanase activity. A region of DNA, upstream from the structural gene has also been sequenced and a ribosome-binding site and putative promoter sequences have been identified. A second ORF which ends 349 bp 5' to the GTG start codon of the celE gene has also been identified. The encoded product contains a C terminus homologous to other C. thermocellum endoglucanases.     

Nucleotide sequence of the Clostridium thermocellum laminarinase gene.

The sequence presented (1022 bp) shows the Clostridium thermocellum laminarinase gene (lam1) and its flanking regions. The gene lam1 comprises an open reading frame of 726 nt, encoding a 242-aa protein with predicted Mr 27661. The ORF startswith the translation initiation codon ATG. This ATG codon is preceded at a spacing of 7 bp by a potential ribosome binding site (GGAGGT). A putative signal peptide was identified (the potential cleavage site is between position 27-28 aa). The comparison of the primary protein sequence with other beta-1, 3-1, 4-glucanases showed extensive homology for Bacillus amyloliqefaciens and Bacillus subtilis glucanases (identity-46.7%; similarity-57.0%).     

Nucleotide sequence of the celC gene encoding endoglucanase C of Clostridium thermocellum

The nucleotide sequence of the cellulase gene celC, encoding endoglucanase C of Clostridium thermocellum, has been determined. The coding region of 1032 bp was identified by comparison with the N-terminal amino acid (aa) sequence of endoglucanase C purified from Escherichia coli. The ATG start codon is preceded by an AGGAGG sequence typical of ribosome-binding sites in Gram-positive bacteria. The derived amino acid sequence corresponds to a protein of Mr 40,439. Amino acid analysis and apparent Mr of endoglucanase C are consistent with the amino acid sequence as derived from the DNA sequencing data. A proposed N-terminal 21-aa residue leader (signal) sequence differs from other prokaryotic signal peptides and is non-functional in E. coli. Most of the protein bears no resemblance to the endoglucanases A, B, and D of the same organism. However, a short region of homology between endoglucanases A and C was identified, which is similar to the established active sites of lysozymes and to related sequences of fungal cellulases.     

Sequence of the cellulase gene of Clostridium thermocellum coding for endoglucanase B.

The nucleotide sequence of the CelB gene, encoding the extracellular endoglucanase B of Clostridium thermocellum, is reported. The putative start of the 1689 bp coding sequence was assigned to an ATG codon which is preceded by an AGGAGG sequence typical of ribosomal binding sites in Gram-positive bacteria. The amino-terminal end of the deduced protein sequence is similar to signal peptides described for other bacterial secretory proteins. The carboxy-terminal ends of endoglucanases A and B appear to be remarkably homologous. A striking feature of the conserved region is that both proteins contain two reiterated stretches of 23 aminoacids each, separated by 9 residues.     

Nucleotide sequence and deletion analysis of the cellulase-encoding gene celH of Clostridium thermocellum

The complete nucleotide sequence of the celH gene of Clostridium thermocellum was determined. The open reading frame extended over 2.7-kb DNA fragment and encoded a 900-amino acid (aa) protein (Mr 102,301) which hydrolyzes carboxymethylcellulose, p-nitrophenyl-beta-D-cellobioside, methylumbelliferyl- beta-D-cellobioside, barley beta-glucan, and larchwood xylan. The N terminus showed a typical signal peptide, and a cleavage site after Ser44 was predicted. Two Pro-Thr-Ser-rich regions divided the protein into three approximately equal domains. The central 328-aa region was similar to the N-terminal part, carrying the active site, of C. thermocellum endoglucanase E (EGE; 30.2%). The C-terminal region ended with two conserved 24-aa stretches showing close similarity with those previously described in EGA, EGB, EGD, EGE, EGX, and xylanase from C. thermocellum. Deletions of celH removing up to 327 codons from the 5' end and up to 245 codons from the 3' end of the coding sequence did not affect enzyme activity, confirming that the central domain was indeed responsible for catalytic activity. Production of truncated EGH in Escherichia coli was increased up to 120-fold by fusing fragments containing the 3' portion of the gene with the start of lacZ' present in pTZ19R.     

Characterization of endoglucanase A from Clostridium cellulolyticum.

A construction was carried out to obtain a high level of expression in Escherichia coli of the gene celCCA, coding for the endoglucanase A from Clostridium cellulolyticum (EGCCA). The enzyme was purified in two forms with different molecular weights, 51,000 and 44,000. The smaller protein was probably the result of proteolysis, although great care was taken to prevent this process from occurring. Evidence was found for the loss of the conserved reiterated domains which are characteristic of C. thermocellum and C. cellulolyticum cellulases. The two forms were extensively studied, and it was demonstrated that although they had the same pH and temperature optima, they differed in their catalytic properties. The truncated protein gave the more efficient catalytic parameters on carboxymethyl cellulose and showed improved endoglucanase characteristics, whereas the intact enzyme showed truer cellulase characteristics. The possible role of clostridial reiterated domains in the hydrolytic activity toward crystalline cellulose is discussed.     

Organization of a Clostridium thermocellum gene cluster encoding the cellulosomal scaffolding protein CipA and a protein possibly involved in attachment of the cellulosome to the cell surface.

The nucleotide sequence was determined for a 9.4-kb region of Clostridium thermocellum DNA extending from the 3' end of the gene (now termed cipA), encoding the S1/SL component of the cellulosome. Three open reading frames (ORFs) belonging to two operons were detected. They encoded polypeptides of 1,664, 688, and 447 residues, termed ORF1p, ORF2p, and ORF3p, respectively. The COOH-terminal regions of the three polypeptides were highly similar and contained three reiterated segments of 60 to 70 residues each. Similar segments have been found at the NH2 terminus of the S-layer proteins of Bacillus brevis and Acetogenium kivui, suggesting that ORF1p, ORF2p, and ORF3p might also be located on the cell surface. Otherwise, the sequence of ORF1p and ORF2p gave little clue concerning their potential function. However, the NH2-terminal region of ORF3p was similar to the reiterated domains previously identified in CipA as receptors involved in binding the duplicated segment of 22 amino acids present in catalytic subunits of the cellulosome. Indeed, it was found previously that ORF3p binds 125I-labeled endoglucanase CelD containing the duplicated segment (T. Fujino, P. Béguin, and J.-P. Aubert, FEMS Microbiol. Lett. 94:165-170, 1992). These findings suggest that ORF3p might serve as an anchoring factor for the cellulosome on the cell surface by binding the duplicated segment that is present at the COOH end of CipA.     

Homologies between herpesvirus of turkey and Marek's disease virus type-1 DNAs within two co-linearly arranged open reading frames, one encoding glycoprotein A

The genomes of two avian herpesviruses, Marek's disease virus type 1 (MDV1) and herpesvirus of turkey (HVT), share close homology only within certain DNA regions. One such homologous region of HVT DNA was cloned and sequenced. Two open reading frames (ORFs) were found in the long unique region, ORF1 encoding the glycoprotein A (gA), and ORF2 encoding a still unidentified protein. These two HVT-ORFs are located at almost the same positions as the homologous MDV1-ORFs. The nucleotide sequence homologies between HVT and MDV1 were 73% and 68% for ORF1 and ORF2, respectively. Both the 5'- and 3'-noncoding regions, however, are less conserved. The third letter within every codon of ORF1 and ORF2 showed a mismatch of greater than 50% between the two viruses. The amino acid (aa) sequence homologies between the corresponding putative viral proteins are 83% and 80% for ORF1 (gA) and ORF2, respectively. More than 90% homology was observed in the C-terminal region of ORF1 (gA). Furthermore, the deduced aa sequences for both of the ORFs in these two viruses showed considerable homology to two adjoining genes in herpes simplex virus type 1, the glycoprotein C and UL45 genes.     

Sequence analysis of the 4.7-kb BamHI-EcoRI fragment of the equine herpesvirus type-1 short unique region.

To localize gene that may encode immunogens potentially important for recombinant vaccine design, we have analysed a region of the equine herpesvirus type-1 (EHV-1) genome where a glycoprotein-encoding gene had previously been mapped. The 4707-bp BamHI-EcoRI fragment from the short unique region of the EHV-1 genome was sequenced. This sequence contains three entire open reading frames (ORFs), and portions of two more. ORF1 codes for 161 amino acids (aa), and represents the C terminus of a possible membrane-bound protein. ORF2 (424 aa) and ORF3 (550 aa) are potential glycoprotein-encoding genes; the predicted aa sequences contain possible signal sequences, N-linked glycosylation sites and transmembrane domains; they also show homology to the glycoproteins gI and gE of herpes simplex virus type-1 (HSV-1), and the related proteins of pseudorabies virus and varicella-zoster virus. The predicted aa sequence of ORF4 shares no homology with other known herpesvirus proteins, but the nucleotide sequence shows a high level of homology with the corresponding region of the EHV-4 genome. ORF5 may be related to US9 of HSV-1.     

Analysis of the inducible MEL1 gene of Saccharomyces carlsbergensis and its secreted product, alpha-galactosidase (melibiase)

We have determined both the nucleotide sequence of the MEL1 gene of Saccharomyces carlsbergensis and the N-terminal amino acid (aa) sequence of its extracellular gene product, alpha-galactosidase (melibiase) (alpha-Gal). The predicted translation product of MEL1 is a pre-alpha-Gal protein containing an 18 aa N-terminal signal sequence for secretion. The purified enzyme is a dimer consisting of two 50-kDal polypeptides, each of which is glycosylated with no more than eight side chains. The 5'-flank of the MEL1 gene contains a region (UASm) having certain areas of sequence homology to similar sites found upstream of the structural genes GAL1, GAL7 and GAL10, which are also regulated by the action of the products of genes GAL4 and GAL80. There are three TATA boxes between UASm and the initiation codon of pre-alpha-Gal, as well as a typical yeast cleavage/polyadenylation sequence in the 3'-flank of the gene.     

The nucleotide sequence of the tyrosinase gene from Streptomyces antibioticus and characterization of the gene product

The sequence of a 1.56-kb DNA fragment containing the tyrosinase gene (mel) from Streptomyces antibioticus was determined and the Mr (30612) and amino acid (aa) sequence of the protein were deduced from the nucleotide (nt) sequence. Intracellular and extracellular tyrosinase from S. antibioticus, transformed with pIJ702 (containing mel), were purified to homogeneity; the Mr (29 500), as determined by Sephadex G-75 chromatography and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), was consistent with the value derived from the nt sequence. Edman degradation established that the N-terminal sequence of both the intracellular and extracellular forms of tyrosinase are identical and correspond to the aa sequence derived from the structural gene. In addition, this sequence exhibits striking homology to the N-terminal region of the intracellular and extracellular enzyme purified from Streptomyces glaucescens (Crameri et al., 1982). An additional open reading frame (ORF438) upstream of the mel gene, was also identified that appears to code for a protein (Mr = 14 754) with a putative signal sequence.     

Nucleotide sequence of the Vibrio alginolyticus calcium-dependent, detergent-resistant alkaline serine exoprotease A

The nucleotide sequence of the Vibrio alginolyticus alkaline serine exoprotease A (ProA) gene cloned in Escherichia coli was determined. The exoprotease A gene (proA) consisted of 1602 bp which encoded a protein of 534 amino acids (aa) with an Mr of 55,900. The region upstream from the gene was characterized by a putative promoter consensus region (-10 -35), a ribosome-binding site and ATG start codon. The proA gene encodes a typical 21-aa N-terminal signal sequence which, when fused to alkaline phosphatase by means of transposon TnphoA, was able to mediate transport of the alkaline phosphatase to the periplasm in E. coli. Deletions of up to 106 aa from the C terminus of ProA did not result in the loss of extracellular protease activity. Additional V. alginolyticus genes were not involved in the secretion into the medium of the cloned ProA in E. coli. The amino acid sequence of ProA showed low overall homology to a Serratia marcescens serine exoprotease but significant homology was detected with other subtilisin family exoproteases. The fungal proteinase K, another sodium dodecyl sulfate-resistant protease, had 44% aa homology with ProA.     

Cloning and DNA sequence of the gene coding for Clostridium thermocellum cellulase Ss (CelS), a major cellulosome component.

Clostridium thermocellum ATCC 27405 produces an extracellular cellulase system capable of hydrolyzing crystalline cellulose. The enzyme system involves a multicomponent protein aggregate (the cellulosome) with a total molecular weight in the millions, impeding mechanistic studies. However, two major components of the aggregate, SS (M(r) = 82,000) and SL (M(r) = 250,000), which act synergistically to hydrolyze crystalline cellulose, have been identified (J. H. D. Wu, W. H. Orme-Johnson, and A. L. Demain, Biochemistry 27:1703-1709, 1988). To further study this synergism, we cloned and sequenced the gene (celS) coding for the SS (CelS) protein by using a degenerate, inosine-containing oligonucleotide probe whose sequence was derived from the N-terminal amino acid sequence of the CelS protein. The open reading frame of celS consisted of 2,241 bp encoding 741 amino acid residues. It encoded the N-terminal amino acid sequence and two internal peptide sequences determined for the native CelS protein. A putative ribosome binding site was identified at the 5' end of the gene. A putative signal peptide of 27 amino acid residues was adjacent to the N terminus of the CelS protein. The predicted molecular weight of the secreted protein was 80,670. The celS gene contained a conserved reiterated sequence encoding 24 amino acid residues found in proteins encoded by many other clostridial cel or xyn genes. A palindromic structure was found downstream from the open reading frame. The celS gene is unique among the known cel genes of C. thermocellum. However, it is highly homologous to the partial open reading frame found in C. cellulolyticum and in Caldocellum saccharolyticum, indicating that these genes belong to a new family of cel genes.     

OlpB, a new outer layer protein of Clostridium thermocellum, and binding of its S-layer-like domains to components of the cell envelope.

Several proteins of Clostridium thermocellum possess a C-terminal triplicated sequence related to bacterial cell surface proteins. This sequence was named the SLH domain (for S-layer homology), and it was proposed that it might serve to anchor proteins to the cell surface (A. Lupas, H. Engelhardt, J. Peters, U. Santarius, S. Volker, and W. Baumeister, J. Bacteriol. 176:1224-1233, 1994). This hypothesis was investigated by using the SLH-containing protein ORF1p from C. thermocellum as a model. Subcellular fractionation, immunoblotting, and electron microscopy of immunocytochemically labeled cells indicated that ORF1p was located on the surface of C. thermocellum. To detect C. thermocellum components interacting with the SLH domains of ORF1p, a probe was constructed by grafting these domains on the C terminus of the MalE protein of Escherichia coli. The SLH domains conferred on the chimeric protein (MalE-ORF1p-C) the ability to bind noncovalently to the peptidoglycan of C. thermocellum. In addition, 125I-labeled MalE-ORF1p-C was shown to bind to SLH-bearing proteins transferred onto nitrocellulose, and to a 26- to 28-kDa component of the cell envelope. These results agree with the hypothesis that SLH domains contribute to the binding of exocellular proteins to the cell surface of bacteria. The gene carrying ORF1 and its product, ORF1p, are renamed olpB and OlpB (for outer layer protein B), respectively.