Posttranslationally modified bacteriocins--the lantibiotics

Lantibiotics are a subgroup of bacteriocins that are characterized by the presence of the unusual thioether amino acids lanthionine and 3-methyllanthionine generated through posttranslational modification. The biosynthesis of lantibiotics follows a defined pathway comprising modifications of the prepeptide, proteolytic activation, and export. The genes encoding the biosynthesis apparatus and the lantibiotic prepeptide are organized in clusters, which also include information for proteins involved in regulation and producer self-protection. The elongated cationic lantibiotics primarily act through the formation of pores and recent progress with nisin and epidermin has shown that specific docking molecules such as lipid II play an essential role in this mechanism. Mersacidin and actagardine inhibit cell wall biosynthesis by complexing the precursor lipid II, whereas the cinnamycin-like peptides bind to phosphoethanolamine thus inhibiting phospholipase A2.     

Isolation and characterization of pediocin L50, a new bacteriocin from Pediococcus acidilactici with a broad inhibitory spectrum.

Lactic acid bacteria were isolated from Spanish dry-fermented sausages and screened for bacteriocin production. About 10% of the isolates produced antimicrobial substances when grown on solid media, but only 2% produced detectable activity in liquid media. Strain L50, identified as Pediococcus acidilactici, showed the strongest inhibitory activity and was active against members of all of the gram-positive genera tested. The strain produced a heat-stable bacteriocin when grown at 8 to 32 degrees C but not at 45 degrees C. The bacteriocin was purified to homogeneity. Its mass was determined to be 5,250.11 +/- 0.30 by electrospray mass spectrometry. The N terminus of the bacteriocin was blocked for sequencing by Edman degradation, but a partial sequence of 42 amino acids was obtained after cleavage of the peptide by cyanogen bromide. The sequence showed no similarity to those of other bacteriocins. Pediocin L50 appears to contain modified amino acids but not lanthionine or methyl-lanthionine.     

Purification and primary structure of pediocin PA-1 produced by Pediococcus acidilactici PAC-1.0.

The plasmid-encoded bacteriocin pediocin PA-1, produced by the gram-positive bacterium Pediococcus acidilactici strain PAC-1.0, was purified to homogeneity. The purified product exhibited antibacterial activity against several gram-positive bacterial strains, including the food pathogen Listeria monocytogenes. Pediocin PA-1 is a 4629-Da peptide with 44 amino acids and two disulfide bonds. The amino acid sequence and arrangement of the disulfide bonds were determined. Sequence data were used to calculate an isoelectric point of 10.0. The small and basic nature of PA-1 is comparable to several other bacteriocins produced by gram-positive bacteria. Reported sequences of other bacteriocins and of other antimicrobial peptides from diverse origins bear no resemblance to the sequence reported here.     

The continuing story of class IIa bacteriocins.

Many bacteria produce antimicrobial peptides, which are also referred to as peptide bacteriocins. The class IIa bacteriocins, often designated pediocin-like bacteriocins, constitute the most dominant group of antimicrobial peptides produced by lactic acid bacteria. The bacteriocins that belong to this class are structurally related and kill target cells by membrane permeabilization. Despite their structural similarity, class IIa bacteriocins display different target cell specificities. In the search for new antibiotic substances, the class IIa bacteriocins have been identified as promising new candidates and have thus received much attention. They kill some pathogenic bacteria (e.g., Listeria) with high efficiency, and they constitute a good model system for structure-function analyses of antimicrobial peptides in general. This review focuses on class IIa bacteriocins, especially on their structure, function, mode of action, biosynthesis, bacteriocin immunity, and current food applications. The genetics and biosynthesis of class IIa bacteriocins are well understood. The bacteriocins are ribosomally synthesized with an N-terminal leader sequence, which is cleaved off upon secretion. After externalization, the class IIa bacteriocins attach to potential target cells and, through electrostatic and hydrophobic interactions, subsequently permeabilize the cell membrane of sensitive cells. Recent observations suggest that a chiral interaction and possibly the presence of a mannose permease protein on the target cell surface are required for a bacteria to be sensitive to class IIa bacteriocins. There is also substantial evidence that the C-terminal half penetrates into the target cell membrane, and it plays an important role in determining the target cell specificity of these bacteriocins. Immunity proteins protect the bacteriocin producer from the bacteriocin it secretes. The three-dimensional structures of two class IIa immunity proteins have been determined, and it has been shown that the C-terminal halves of these cytosolic four-helix bundle proteins specify which class IIa bacteriocin they protect against.     

细菌素的合成与作用机制

细菌素是由细菌产生的抗菌蛋白,可以杀死与产生菌相近的细菌。很多乳酸菌产生不同多样性的细菌素,虽然这些细菌素都是由发酵或非发酵食品中发现的乳酸菌产生的,但是迄今只有乳酸链球菌素(Nisin)作为食品防腐剂被广泛应用。和抗生素不同的是,细菌素由核糖体合成,需经翻译后修饰活化并且通过特定转运系统输到胞外才能发挥其功能,它一般通过作用于靶细胞膜来抑制靶细胞的生长,同时本身合成细菌素的细胞对其产物具有免疫性。细菌素能安全有效地抑制病原体生长,在食品行业中具有广阔的应用前景。     

Linear DNA plasmids of yeasts

Abstract Proteinaceous antimicrobial compounds are produced by a diversity of species ranging from bacteria to humans. This review focuses on the mode of action of pore-forming bacteriocins produced by Gram-positive bacteria. The mechanism of action of specific immunity proteins, which protect the producer strains from the lethal action of their own products (producer self-protection), are also discussed.     

Ruminococcin A, a new lantibiotic produced by a Ruminococcus gnavus strain isolated from human feces

When cultivated in the presence of trypsin, the Ruminococcus gnavus E1 strain, isolated from a human fecal sample, was able to produce an antibacterial substance that accumulated in the supernatant. This substance, called ruminococcin A, was purified to homogeneity by reverse-phase chromatography. It was shown to be a 2,675-Da bacteriocin harboring a lanthionine structure. The utilization of Edman degradation and tandem mass spectrometry techniques, followed by DNA sequencing of part of the structural gene, allowed the identification of 21 amino acid residues. Similarity to other bacteriocins present in sequence libraries strongly suggested that ruminococcin A belonged to class IIA of the lantibiotics. The purified ruminococcin A was active against various pathogenic clostridia and bacteria phylogenetically related to R. gnavus. This is the first report on the characterization of a bacteriocin produced by a strictly anaerobic bacterium from human fecal microbiota.     

Nuclear magnetic resonance solution structure of PisI, a group B immunity protein that provides protection against the type IIa bacteriocin piscicolin 126, PisA

Lactic acid bacteria produce and secrete bacteriocins. These bacteriocins are potent antimicrobial peptides that are active against other closely related bacteria. As a means of self-protection, producer organisms also express immunity proteins. Immunity proteins are generally located on the same genetic locus and are cotranscribed with the bacteriocin. Although some cross immunity between bacteriocins has been observed, immunity proteins are typically highly specific. Immunity proteins for the type IIa bacteriocins range from 81 to 115 amino acids in length and display substantial variation in their sequences. Nonetheless, such immunity proteins have been classified into three groupings (groups A, B, and C) according to sequence homology. The structures of a group C (ImB2) and two group A (EntA-im and PedB) immunity proteins have previously been reported. We herein report the nuclear magnetic resonance solution structure of the remaining class of the type IIa immunity proteins. PisI, a 98-amino acid protein, is a group B immunity protein conferring immunity against piscicolin 126 (PisA). Like ImB2, EntA-im, and PedB, PisI folds into a globular protein in aqueous solution and contains an antiparallel four-helix bundle. Compared to ImB2 and EntA-im, PisI has a substantially longer and more flexible N-terminus, but a shorter C-terminus. No direct interaction between the bacteriocin and immunity protein is observed by NMR in either aqueous or membrane mimicking environments. This further suggests that the mechanism that mediates immunity is not due to a direct bacteriocin-immunity protein interaction but rather is receptor-mediated. It has now been confirmed that the four-helix bundle is indeed a structural motif among the type IIa immunity proteins.     

Detection and characterization of a novel antibacterial substance produced by a Lactobacillus delbrueckii strain 1043

A novel antibacterial substance produced by a strain isolated from Bulgarian yellow cheese was characterized. The producer strain was identified by molecular typing to belong to the species Lactobacillus delbrueckii , which is a rare producer of bacteriocins. The inhibitory agent was heat stable and active against lactic acid bacteria species and several food-borne pathogens : Listeria monocytogenes , Staphylococcus aureus , Enterococcus faecalis , Escherichia coli , Yersinia enterocolitica and Y. pseudotuberculosis . Its sensitivity to amylolitic enzymes and lipase suggested that a lipid and carbohydrate moiety could be important for the activity. The amino acid content of the purified bacteriocin was estimated to 29 amino acids. The bacteriocin was shown to be small (3·6–6 kDa) by three different methods : HPLC gel-filtration, SDS-PAGE and amino acid contents.     

Novel method to extract large amounts of bacteriocins from lactic acid bacteria.

Antimicrobial peptides, bacteriocins, produced by lactic acid bacteria were adsorbed on the cells of producing strains and other gram-positive bacteria. pH was a crucial factor in determining the degree of adsorption of these peptides onto cell surfaces. In general, between 93 and 100% of the bacteriocin molecules were adsorbed at pHs near 6.0, and the lowest (< or = 5%) adsorption took place at pH 1.5 to 2.0. On the basis of this property, a novel isolation method was developed for bacteriocins from four genera of lactic acid bacteria. By using this method we made preparations of pediocin AcH, nisin, sakacin A, and leuconocin Lcm1 that were potent and concentrated. This method produced a higher yield than isolation procedures, which rely on precipitation of the bacteriocins from the cell-free culture liquor. It is simple and can be used to produce large quantities of bacteriocins from lactic acid bacteria to be used as food biopreservatives.     

Novel method to extract large amounts of bacteriocins from lactic acid bacteria.

Antimicrobial peptides, bacteriocins, produced by lactic acid bacteria were adsorbed on the cells of producing strains and other gram-positive bacteria. pH was a crucial factor in determining the degree of adsorption of these peptides onto cell surfaces. In general, between 93 and 100% of the bacteriocin molecules were adsorbed at pHs near 6.0, and the lowest (< or = 5%) adsorption took place at pH 1.5 to 2.0. On the basis of this property, a novel isolation method was developed for bacteriocins from four genera of lactic acid bacteria. By using this method we made preparations of pediocin AcH, nisin, sakacin A, and leuconocin Lcm1 that were potent and concentrated. This method produced a higher yield than isolation procedures, which rely on precipitation of the bacteriocins from the cell-free culture liquor. It is simple and can be used to produce large quantities of bacteriocins from lactic acid bacteria to be used as food biopreservatives.     

Bacteriocin detection from whole bacteria by matrix-assisted laser desorption ionization-time of flight mass spectrometry

Class I bacteriocins (lantibiotics) and class II bacteriocins are antimicrobial peptides secreted by gram-positive bacteria. Using two lantibiotics, lacticin 481 and nisin, and the class II bacteriocin coagulin, we showed that bacteriocins can be detected without any purification from whole producer bacteria grown on plates by matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF-MS). When we compared the results of MALDI-TOF-MS performed with samples of whole cells and with samples of crude supernatants of liquid cultures, the former samples led to more efficient bacteriocin detection and required less handling. Nisin and lacticin 481 were both detected from a mixture of their producer strains, but such a mixture can yield additional signals. We used this method to determine the masses of two lacticin 481 variants, which confirmed at the peptide level the effect of mutations in the corresponding structural gene.     

Colicin V can be produced by lactic acid bacteria

Colicin V is a small, proteinaceous bacterial toxin, produced by many strains of Escherichia coli and other members of the Enterobacteriaceae, that fits the definition of class II bacteriocins of Gram-positive bacteria. Export of colicin V is dependent on specific ABC (ATP-binding cassette) secretion proteins which recognize a double-glycine-type leader peptide on the immature colicin V bacteriocin. Replacement of the colicin V leader peptide by a signal peptide from the signal sequence-dependent bacteriocin divergicin A allowed expression of colicin V in lactic acid bacteria. This system may serve as a model for the heterologous expression of other small bacteriocins active against Gram-negative bacteria and other antibacterial peptides from lactic acid bacteria.     

Diversity of bacteriocins and activity spectrum in Streptococcus pneumoniae

The production of bacteriocins can be favorable for colonization of the host by eliminating other bacterial species that share the same environment. In Streptococcus pneumoniae, the pnc (blp) locus encoding putative bacteriocins, immunity, and export proteins is controlled by a two-component system similar to the comCDE system required for the induction of genetic competence. A detailed comparison of the pnc clusters of four genetically distinct isolates confirmed the great plasticity of this locus and documented several repeat sequences. Members of the multiple-antibiotic-resistant Spain23F-1 clone, one member of the Spain9V-3 clone, sensitive 23F strain 2306, and the TIGR4 strain produced bactericidal substances active against other gram-positive bacteria and in some cases against S. pneumoniae as well. However, other strains did not show activity against the indicator strains despite the presence of a bacteriocin cluster, indicating that other factors are required for bacteriocin activity. Analysis of strain 2306 and mutant derivatives of this strain confirmed that bacteriocin production was dependent on the two-component regulatory system and genes involved in bacteriocin transport and processing. At least one other bacteriocin gene, pncE, is located elsewhere on the chromosome and might contribute to the bacteriocin activity of this strain.     

Selection and fitness in bacteriocin-producing bacteria.

Bacteriocins are proteinaceous anticompetitor molecules produced by bacteria against closely related species. A number of theoretical models have been used to explain experimental data that indicate high polymorphisms among bacteriocins and a frequency-dependent nature of selection for bacteriocin-producing strains. The majority of these experimental data were, however, obtained from investigations into the colicin group of bacteriocins produced by Gram-negative bacteria. The conclusions drawn from these models have been extrapolated to other bacteriocins and allelopathic compounds in general. Examination of more recent experimental investigations into the bacteriocins of Gram-positive bacteria indicate a lower degree of polymorphism and a less frequency dependent mode of selection among these strains them among the colicin-producing strains. Here we examine these contradictions in the light of the assumptions and conclusions of the theoretical models and reported data. We show that fitness costs as indicated by decreased relative maximum growth rate associated with bacteriocin production may be much lower in many cases than is assumed in the present models. A lower fitness cost associated with bacteriocin production adequately explains the newer data from Gram-positive bacteria cited here, and indicates that extrapolation of existing models to all bacteriocins and other allelopathic compounds is not appropriate.     

Characteristics and identification of bacteriocins produced by Lactococcus lactis subsp. lactis 194-K

The Lactococcus lactis subsp. lactis 194-K strain has been established to be able to produce two bacteriocins, one of which was identified as the known lantibiotic nisin A, and the other 194-D bacteriocin represents a polypeptide with a 2589-Da molecular mass and comprises 20 amino acid residues. Both bacteriocins were produced in varying proportions in all of the studied culture media, which support the growth of the producer. Depending on the cultivation medium, the nisin A content was 380- to 1123-fold lower in the 194-K stain culture broth than that of the 194-D peptide. In comparision to nisin A Bacteriocin 194-D possessed a wide range of antibacterial activity and suppressed the growth of both Gram-positive and Gram-negative bacteria. An optimal medium for 194-D bacteriocin synthesis was shown to be a fermentation medium which contained yeast extract, casein hydrolysate, and potassium phosphate. The biosynthesis of bacteriocin 194-D by the 194-K strain in these media occurred parallel to producer growth, and its maximal accumulation in the culture broth was observed at14–20 h of the strain’s growth.     

Bacteriocin-like activity production and resistance in selected enterococci and streptococci of animal origin

Antimicrobial proteins and peptides produced by bacteria, termed bacteriocins, are widely acknowledged to be important contributors to their producer organism survival. Enterocin A, enterocin B, enterocin P and enterolysin A belong to the best studied enterocins, i.e., bacteriocins produced by enterococci and streptococci. Twenty-one enterococcal and seven streptococcal isolates were analysed for bacteriocin-like activity production and resistance by overlay test. Up to 50% of tested strains showed antibacterial activity at least against one indicator strain. The occurrence of enterocin B structural gene in several isolates was confirmed by PCR method. The results of this study should broaden knowledge of bacteriocin-like activity production and resistance among gram-positive bacteria.     

Bacteriocin-like activity production and resistance in selected enterococci and streptococci of animal origin

Antimicrobial proteins and peptides produced by bacteria, termed bacteriocins, are widely acknowledged to be important contributors to their producer organism survival. Enterocin A, enterocin B, enterocin P and enterolysin A belong to the best studied enterocins, i.e., bacteriocins produced by enterococci and streptococci. Twenty-one enterococcal and seven streptococcal isolates were analysed for bacteriocin-like activity production and resistance by overlay test. Up to 50% of tested strains showed antibacterial activity at least against one indicator strain. The occurrence of enterocin B structural gene in several isolates was confirmed by PCR method. The results of this study should broaden knowledge of bacteriocin-like activity production and resistance among gram-positive bacteria.     

Bacteriocin Production and Different Strategies for Their Recovery and Purification

Bacteriocins from lactic acid bacteria (LAB) are a diverse group of antimicrobial proteins/peptides, offering potential as biopreservatives, and exhibit a broad spectrum of antimicrobial activity at low concentrations along with thermal as well as pH stability in foods. High bacteriocin production usually occurs in complex media. However, such media are expensive for an economical production process. For effective use of bacteriocins as food biopreservatives, there is a need to have heat-stable wide spectrum bacteriocins produced with high-specific activity in food-grade medium. The main hurdles concerning the application of bacteriocins as food biopreservatives is their low yield in food-grade medium and time-consuming, expensive purification processes, which are suitable at laboratory scale but not at industrial scale. So, the present review focuses on the bacteriocins production using complex and food-grade media, which mainly emphasizes on the bacteriocin producer strains, media used, different production systems used and effect of different fermentation conditions on the bacteriocin production. In addition, this review emphasizes the purification processes designed for efficient recovery of bacteriocins at small and large scale.     

The bacteriocins of ruminal bacteria and their potential as an alternative to antibiotics

Beef cattle have been fed ionophores and other antibiotics for more than 20 years to decrease ruminal fermentation losses (e.g methane and ammonia) and increase feed efficiency, and these improvements have been explained by an inhibition of gram-positive ruminal bacteria. Ionophores are not used to treat human disease, but there has been an increased perception that antibiotics should not be used as feed additives. Some bacteria produce small peptides (bacteriocins) that inhibit gram-positive bacteria. In vitro experiments indicated that the bacteriocin, nisin, and the ionophore, monensin, had similar effects on ruminal fermentation. However, preliminary results indicated that mixed ruminal bacteria degraded nisin, and the ruminal bacterium, Streptococcus bovis, became highly nisin-resistant. A variety of ruminal bacteria produce bacteriocins, and bacteriocin production has, in some cases, been correlated with changes in ruminal ecology. Some ruminal bacteriocins are as potent as nisin in vitro, and resistance can be circumvented. Based on these results, ruminal bacteriocins may provide an alternative to antibiotics in cattle rations.