Structures and energies of isomers of 1-nitroso-3-nitro-1,2,4-triazol-5-one-2-oxide

Isomers of 1-nitroso-3-nitro-1,2,4-triazol-5-one-2-oxide are of interest in the contest of high explosives and were found to have true local energy minima at the hybrid DFT-B3LYP/aug-cc-pVDZ level. The optimised structures, vibrational frequencies and thermodynamic values for triazol-5-one-N-oxides have been obtained in the ground state. Kamlet–Jacob equations were used to evaluate the performance of model compounds based on the predicted density and the calculated heat of explosion. The detonation properties (D = 10.15–10.46 km/s, P = 50.86–54.25 GPa) of designed compounds were found to be promising compared with 1,3,5-trinitro-1,3,5-triazine (D = 8.75 km/s, P = 34.7 GPa), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (D = 8.96 km/s, P = 35.96 GPa), 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (D = 9.20 km/s, P = 42.0 GPa) and octanitrocubane (D = 9.90 km/s, P = 48.45 GPa). The replacement of secondary hydrogen by nitroso group appears to be a particularly promising area for investigation since it may lead to the desirable consequences of higher heat of explosion, higher density and thus detonation performance.     

Theoretical studies on the thermodynamic properties, densities, detonation properties, and pyrolysis mechanisms of trinitromethyl-substituted aminotetrazole compounds

Trinitromethyl-substituted aminotetrazoles with –NH₂, –NO₂, –N₃, and –NHC(NO₂)₃ groups were investigated at the B3LYP/6-31G(d) level of density functional theory. Their sublimation enthalpies, thermodynamic properties, and heats of formation were calculated. The thermodynamic properties of these compounds increase with temperature as well as with the number of nitro groups attached to the tetrazole ring. In addition, the detonation velocities and detonation pressures of these compounds were successfully predicted using the Kamlet–Jacobs equations. It was found that these compounds exhibit good detonation properties, and that compound G (D = 9.2 km/s, P = 38.8 GPa) has the most powerful detonation properties, which are similar to those of the well-known explosive HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocine). Finally, the electronic structures and bond dissociation energies of these compounds were calculated. The BDEs of their C–NO₂ bonds were found to range from 101.9 to 125.8 kJ/mol^-1. All of these results should provide useful fundamental information for the design of novel HEDMs.     

Comparative theoretical studies of differently bridged nitramino-substituted ditetrazole 2-<Emphasis Type="Italic">N</Emphasis>-oxides with high detonation performance and an oxygen balance of around zero

In this work, six (A–F) nitramino (–NHNO₂)-substituted ditetrazole 2-N-oxides with different bridging groups (–CH₂–, –CH₂–CH₂–, –NH–, –N=N–, and –NH–NH–) were designed. The six compounds were based on the parent compound tetrazole 2-N-oxide, which possesses a high oxygen balance and high density. The structure, heat of formation, density, detonation properties (detonation velocity D and detonation pressure P), and the sensitivity of each compound was investigated systematically via density functional theory, by studying the electrostatic potential, and using molecular mechanics. The results showed that compounds A–F all have outstanding energetic properties (D: 9.1–10.0 km/s; P: 38.0–46.7 GPa) and acceptable sensitivities (h ₅₀: 28–37 cm). The bridging group present was found to greatly affect the detonation performance of each ditetrazole 2-N-oxide, and the compound with the –NH–NH– bridging group yielded the best results. Indeed, this compound (F) was calculated to have comparable sensitivity to the famous and widely used high explosive 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX), but with values of D and P that were about 8.7% and 19.4% higher than those for HMX, respectively. The present study shows that tetrazole 2-N-oxide is a useful parent compound which could potentially be used in the design of new and improved high-energy compounds to replace existing energetic compounds such as HMX.     

Theoretical investigation of a novel high density cage compound 4,8,11,14,15–pentanitro-2,6,9,13–tetraoxa-4,8,11,14,15-pentaazaheptacyclo[5.5.1.13,11. 15,9] pentadecane

A novel polynitro cage compound 4,8,11,14,15-pentanitro-2,6,9,13-tetraoxa-4,8,11,14,15–pentaazaheptacyclo [5.5.1.1^3,11.1^5,9]pentadecane(PNTOPAHP) has been designed and investigated at the DFT-B3LYP/6-31(d) level. Properties, such as electronic structure, IR spectrum, heat of formation, thermodynamic properties and crystal structure have been predicted. This compound is most likely to crystallize in C2/c space group, and the corresponding cell parameters are Z?=?8, a?=?29.78 Å, b?=?6.42 Å, c?=?32.69 Å, α?=?90.00°, β?=?151.05°, γ?=?90.00°and ρ?=?1.94 g/cm³. In addition, the detonation velocity and pressure have also been calculated by the empirical Kamlet-Jacobs equation. As a result, the detonation velocity and pressure of this compound are 9.82 km/s, 44.67 GPa, respectively, a little higher than those of 4,10-dinitro-2,6,8,12–tetraoxa?4,10-diazaisowurtzitane(TEX, 9.28 km/s, 40.72 GPa). This compound has a comparable chemical stability to TEX, based on the N-NO₂ trigger bond length analysis. The bond dissociation energy ranges from 153.09 kJ mol^–1 to 186.04 kJ mol^–1, which indicates that this compound meets the thermal stability requirement as an exploitable HEDM.     

Theoretical studies on the crystal structure, thermodynamic properties, detonation performance and thermal stability of cage-tetranitrotetraazabicyclooctane as a novel high energy density compound

The B3LYP/6-31G (d) method of density functional theory (DFT) was used to study molecular geometry, electronic structure, infrared spectrum (IR) and thermodynamic properties. The heat of formation (HOF) and calculated density were estimated to evaluate the detonation properties using Kamlet–Jacobs equations. Thermal stability of 3,5,7,10,12,14,15,16-octanitro- 3,5,7,10,12,14,15,16-octaaza-heptacyclo[7.5.1.1^2,8.0^1,11.0^2,6.0^4,13.0^6,11]hexadecane (cage-tetranitrotetraazabicyclooctane) was investigated by calculating the bond dissociation energy (BDE) at unrestricted B3LYP/6-31G (d) level. The calculated results show that the N–NO₂ bond is a trigger bond during thermolysis initiation process. The crystal structure obtained by molecular mechanics (MM) methods belongs to Pna2₁ space group, with cell parameters a?=?12.840 Å, b?=?9.129 Å, c?=?14.346 Å, Z?=?6 and ρ?=?2.292 g·cm^?3. Both the detonation velocity of 9.96 km·s^?1 and the detonation pressure of 47.47 GPa are better than those of CL-20. According to the quantitative standard of energetics and stability, as a high energy density compound (HEDC), cage-tetranitrotetraazabicyclooctane essentially satisfies this requirement.     

Quantum chemical studies on the aminopolynitropyrazoles

We have explored the geometric and electronic structures, band gap, thermodynamic properties, density, detonation velocity and detonation pressure of aminopolynitropyrazoles using the density functional theory (DFT) at the B3LYP/aug-cc-pVDZ level. The calculated detonation velocity and detonation pressure, stability and sensitivity of model compounds appear to be promising compared to the known explosives 3,4-dinitro-1 H-pyrazole (3,4-DNP), 3,5-dinitro-1 H-pyrazole (3,5-DNP), hexahydro-1,3,5-trinitro-1,3,5-triazinane (RDX) and octahydro-1,3,5,7-tetranitro-l,3,5,7-tetraazocane (HMX). The position of NH₂ group in the polynitropyrazoles presumably determines the structure, stability, sensitivity, density, detonation velocity and detonation pressure.     

A DFT study of tautomers of 3-amino-1-nitroso-4-nitrotriazol-5-one-2-oxide

We report herein the structure and explosive properties of the possible isomers of 3-amino-1-nitroso-4-nitrotriazol-5-one-2-oxide computed from the B3LYP/aug-cc-pVDZ level. The optimized structures, vibrational frequencies and thermodynamic values for triazol-5-one-N-oxides were obtained in the ground state. Several designed compounds have densities varying from 2.103 to 2.177 g/cm³. The detonation properties were evaluated by the Kamlet-Jacob equations based on the predicted density and the calculated heat of explosion. The detonation properties of triazol-5-one-N-oxides (D 9.87 to 10.11 km s^?1 and P 48.95 to 50.61 GPa) appear to be promising compared with those of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (D 9.20 km s^?1, P 42.0 Gpa) and octanitrocubane (D 9.90 km s^?1, P 48.45 GPa). The substitution of secondary amino hydrogen of the triazole ring by amino group shows better impact sensitivity/or stability however the model compounds seem to be highly sensitive.     

Molecular design of new nitramine explosives: 1,3,5,7-tetranitro-8-(nitromethyl)-4-imidazolino[4,5-b]4-imidazolino-[4,5-e] pyridine and its N-oxide

Two new nitramine compounds containing pyridine, 1,3,5,7-tetranitro-8-(nitromethyl) -4-imidazolino[4,5-b]4-imidazolino-[4,5-e]pyridine and its N-oxide 1,3,5,7-tetranitro-8- (nitromethyl)-4-imidazolino[4,5-b]4-imidazolino-[4,5-e]pyridine-4-ol were proposed. Density functional theory (DFT) has been employed to study the molecular geometries, electronic structures, infrared spectra, and thermodynamic properties at the B3LYP/6-31G* level. Their detonation performances evaluated using the Kamlet-Jacobs equations with the calculated densities and heats of formation are superior to those of HMX. The predicted densities of them were ca. 2 g*cm^-3, detonation velocities were over 9 km*s^-1, and detonation pressures were about 40 GPa, showing that they may be potential candidates of high energy density materials (HEDMs). The natural bond orbital analysis indicated that N-NO₂ bond is the trigger bond during thermolysis process. The stability of the title compounds is slightly lower than that of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12- hexaazaisowurtzitane (CL-20). The results of this study may provide basic information for the molecular design of new HEDMs.     

Looking for high energy density compounds among polynitraminecubanes

Based on fully optimized geometric structures at DFT-B3LYP/6-311G** level, we calculated electronic structures, heats of formation, strain energies, bond dissociation energies and detonation performance (detonation velocity and detonation pressure) for a series of polynitraminecubanes. Our results have shown that energy gaps of cubane derivatives are much higher than that of triaminotrinitrobenzene (TATB), which means that cubane derivatives may be more sensitive than TATB. Polynitraminecubanes have high and positive heats of formation, and a good linear relationship between heats of formation and nitramine group numbers was presented. As the number of nitramine groups in the molecule increases, the enthalpies of combustion values are increasingly negative, but the specific enthalpy of combustion values decreases. It is found that all cubane derivatives have high strain energies, which are affected by the number and position of nitramine group. The calculated bond dissociation energies of C-NHNO₂ and C-C bond show that the C-C bond should be the trigger bond in the pyrolysis process. It is found that detonation velocity (D), detonation pressure (P) and molecule density (ρ) have good linear relationship with substituented group numbers. Heptanitraminecubane and octanitraminecubane have good detonation performance over 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX), and they can be regarded as potential candidates of high energy density compounds (HEDCs). The results have not only shown that these compounds may be used as HEDCs, but also provide some useful information for further investigation.     

A DFT study of the structure–property relationships of bistetrazole-based high-nitrogen energetic metal complexes

In this work, six series of new energetic metal complexes were designed. Each complex contained a large, high-energy, high-nitrogen, anionic chelating ligand (either the 5,5′-bistetrazolate anion, the 5,5′-azobistetrazolate anion, or the 5,5′-(hydrazine-1,2-diyl)bis-[1H-tetrazol-1-ide] anion—each of which has a different bridging group), Cu or Ni as the metal atom, and two small complexing agent ligands (NH₃ and/or NH₂NO₂). The molecular and electronic structures, heats of formation, densities, detonation properties, and impact sensitivities of the novel complexes were studied using density functional theory. Furthermore, the effects of varying the large chelating ligand (and thus the bridging group), the small complexing agents, and the metal atom on the structure and properties of the complex were investigated and analyzed in depth. The results show that the particular metal, bridging group, and complexing agents included in the energetic complex influence its structure and properties, but the effects of varying the constituents of the complex are complicated or unclear, and these effects are sometimes intertwined. In addition, the detonation pressures, detonation velocities, and impact sensitivities of the novel complexes ranged from 25.9 to 38.6 GPa, from 7.21 to 8.80 km s^?1, and from 17 to 48 cm, respectively. Five of the complexes (B3, C3, D3, E3, and F3) appear to possess comparable performance to the famous and widely used high explosive 1,3,5-trinitro-1,3,5-triazinane, making these new complexes attractive to energetic materials experimentalists.     

Probiotic Effect of <Emphasis Type="Italic">Bacillus licheniformis fb11</Emphasis> on the Digestive Efficiency and Growth Performance in Juvenile <Emphasis Type="Italic">Chitala chitala</Emphasis> (Hamilton, 1822)

Five isocaloric (430 kcal 100 g^?1), isonitrogenous (40% CP) experimental diets were formulated with different concentrations of Bacillus licheniformis fb11 probionts (isolated from the gut of Chitala chitala) viz. Control (without probionts), 5 × 10⁴ CFU g^?1 (D₁), 5 × 10⁵ CFU g^?1 (D₂), 5 × 10⁶ CFU g^?1 (D₃), 5 × 10⁷ CFU g^?1 (D₄), 5 × 10⁸ CFU g^?1 (D₅) to evaluate its efficiency in C. chitala juvenile. The best growth performance, feed utilisation, specific α-amylase, total protease and lipase activity were observed with the diet D₃ (P < 0.05). The lowest Presumptive Pseudomonas Count, Motile Aeromonad Count, Total Coliform Count was observed for D₃ (P < 0.05) on 90th day of trial. Two uppermost values were achieved in case of crude protein for D₃ and D₂ (P > 0.05). The highest lipid content (12.12 ± 0.4 g 100 g^?1) was found for D₅ (P < 0.05). The highest gross energy (18.75 ± 0.21 MJ 100 g^?1) of carcass was recorded for D₃. Thus B. licheniformis fb11 at the concentration 5 × 10⁶ CFU g^?1 as probiotic supplement promoted growth, digestion in C. chitala juvenile significantly by modulating intestinal microflora.     

A computational approach to design energetic ionic liquids

The present work deals with the theoretical estimation of ion-pair binding energies and the energetic properties of four ion pairs formed by combining the 1-butyl-2,4-dinitro-3-methyl imidazolium ion with nitrate (I), perchlorate (II), dinitramide (III), or 3,5-dinitro-1,2,4-triazolate (IV) anions. The counterpoise-corrected ion-pair binding energies were calculated for each ion pair at the B3LYP/6-311+G(d,p) level of theory. Results show that the cation–anion interaction is strongest for ion pair I and weakest for IV, indicating that the nitrate (I) has a greater tendency to exist as a stable ionic salt whereas the 3,5-dinitro-1,2,4-triazolate (IV) may exist as an ionic liquid. Natural bond orbital (NBO) analysis and electrostatic potential (ESP) mapping revealed that charge transfer occurs in all of the ion pairs, but is greatest (0.25e) for ion pair I and smallest (0.03e) for IV, resulting in ion pair I being the least polarized. A nucleus-independent chemical shift (NICS) study revealed that the aromaticity of the 1-butyl-2,4-dinitro-3-methyl imidazolium ion significantly increases in ion pair IV, indicating that this has the greatest charge delocalization among all of the four ion pairs considered. Studies of thermodynamic and detonation properties showed that ion pair II is the most energetic ion pair in terms of its detonation velocity (D = 7.5 km s^?1) and detonation pressure (P = 23.1 GPa). It is also envisaged that ion pair IV would exist as an energetic azolium azolate type ionic liquid that could be conveniently used as a secondary explosive characterized by detonation parameters D and P of 6.9 km s^?1 and 19.3 GPa, respectively. These values are comparable to those of conventional explosives such as TNT.     

The search for new powerful energetic transition metal complexes based on 3,3′-dinitro-5,5′-bis-1,2,4-triazole-1,1′-diolate anion: a DFT study

In this study, employing a new high oxygen balance energetic 3,3′-dinitro-5,5′-bis-1,2,4-triazole-1,1′-diolate anion (DNBTDO) as the bidentate ligand, NH₃ and NH₂NO₂ as short energetic ligands, and Cu/Ni as the metal atoms, two series of novel energetic metal complexes were computationally designed. Their structures and properties were studied by density functional theory, electrostatic potential data, and molecular mechanics methods. The results showed that the designed metal complexes have high detonation performance and acceptable sensitivity: Cu/Ni(DNBTDO)(NH₂NO₂)₂ (A3/B3) have better detonation properties and lower sensitivity than the most powerful CHNO explosive hexanitrohexaazaisowurtzitane, Cu/Ni(DNBTDO)(NH₃)(NH₂NO₂) (A2/B2) have comparable energetic performance and sensitivity with 1,3,5,7-tetranitro-1,3,5,7-tetrazocane, Ni(DNBTDO)(NH₃)₂ (B1) has comparative energy level and sensitivity with 1,3,5-trinitro-1,3,5-triazinane. These five energetic metal complexes may be attractive to energetic materials researchers. Besides, both the energetic ligands and metal atoms could have a great influence on the structures, heats of formation, detonation properties, and stability of energetic metal complexes, and the effects are coupled with each other. This study may be helpful in the search for and development of new improved energetic materials.     

A DFT study of aminonitroimidazoles

Density functional theory (DFT) calculations at the B3LYP/aug-cc-pVDZ level were performed to explore the geometric and electronic structures, band gaps, thermodynamic properties, densities and performances of aminonitroimidazoles. The calculated performance properties, stabilities and sensitivities of the model compounds appear to be promising compared with those of the known explosives 2,4-dinitro-1H-imidazole (2,4-DNI), 1-methyl-2,4,5-trinitroimidazole (MTNI), hexahydro-1,3,5-trinitro-1,3,5-triazinane (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetraazocane (HMX). The position of the NH₂ or the number of NO₂ groups on the diazole presumably determines the structure, heat of formation, stability, sensitivity, density and performance of the compound.     

Association between the rs6950982 polymorphism near the SERPINE1 gene and blood pressure and lipid parameters in a high-cardiovascular-risk population: interaction with Mediterranean diet

The SERPINE1 (serpin peptidase inhibitor, clade E, member 1) gene, better known by its previous symbol PAI-1 (plasminogen activator inhibitor 1), has been associated with cardiovascular phenotypes with differing results. Our aim was to examine the association between the rs6950982 (G > A) near the SERPINE1 gene, blood pressure (BP) and plasma lipid concentrations as well as the modulation of the polymorphism effects by adherence to Mediterranean diet (AMD). We studied 945 high-cardiovascular-risk subjects. Biochemical, clinical, dietary and genetic data (rs6950982) were obtained. We also determined the common rs1799768 (4G/5G), for checking independent effects. AMD was measured by a validated questionnaire, and four groups were considered. rs6950982 (A > G) and rs1799768 (4G/5G) were only in moderate–low linkage disequilibrium (D′ = 0.719; r ² = 0.167). The most significant associations we obtained were with rs6950982 (A > G). In males, the G allele was nominally associated with higher diastolic BP (AA: 81.5 ± 10.9, AG: 82.1 ± 11.4, GG: 85.7 ± 10.5 mmHg; P _additive = 0.030) and systolic BP (AA + AG: 141.4 ± 6.9 mmHg vs. GG: 149.8 ± 8.0 mmHg; P _recessive = 0.036). In the whole population, the rs6950982 was also associated with plasma lipids. Subject with the G allele presented higher total cholesterol (P _additive = 0.016, P _recessive = 0.011), low-density lipoprotein cholesterol (P _additive = 0.032, P _recessive = 0.031) and triglycerides (P _additive = 0.040, P _recessive = 0.029). AMD modulated the effect of rs6950982 on triglyceride concentrations (P for interaction = 0.036). Greater AMD reduced the higher triglyceride concentrations in GG subjects. No significant interactions were found for the other parameters. The rs6950982 was associated with higher BP in men and higher triglycerides in the whole population, this association being modulated by AMD.     

Pterocladia (Rhodophyta) and Ulva (Chlorophyta) as feed supplements for European seabass, Dicentrarchus labrax L., fry

The aim of this study was to evaluate the suitability of two marine macroalgae, Ulva lactuca (Chlorophyta) and Pterocladia capillacea (Rhodophyta), meals as a supplement to enhance the nutritional value of formulated feeds for European seabass Dicentrarchus labrax fry. Seven isoproteic (50 % crude protein), isocaloric (500 Kcal/100 g gross energy) diets containing four levels (0 or control, 5, 10, and 15 %) of either Ulva meal (UM) or Pterocladia meal (PM) were tested. Each diet was fed to triplicate groups of D. labrax fry (initial body weight, 0.23?±?0.02 g for Ulva- and 0.14?±?0.01 g for Pterocladia-fed fish), to apparent visual satiety for 8 weeks. The results indicated that feeding seabass at 5 % UM or PM level (U₅ and P₅ diets) produced the best growth, feed utilization, nutrient retention, and survival rates among all the dietary groups. Feeding fish with a 5 % PM-added diet has also improved stress response after a 5-min air exposure test, prior to the termination of the feeding trial. These findings suggest that both Pterocladia and Ulva meals could be potentially used as an additional feed component (at 5 %) for enhancement of seabass D. labrax fry performance, nutrients composition, and stress resistance especially when subjected to transportation from hatchery to weaning ponds/tanks.     

DFT study on crystalline 1,1-diamino-2,2-dintroethylene under high pressures

DFT calculations have been performed to study the structural, electronic, absorption, and thermodynamic properties of crystalline 1,1-diamino-2,2-dintroethylene (α-FOX-7) in the pressure range of 0–40 GPa. A comprehensive analysis of the variation trends of the lattice constants, bond lengths, bond angles, and twist angles under compression shows that six structural transformations occur in α-FOX-7 at 2, 5, 11, 19, 29, and 35 GPa, respectively. The C1-N1 and C1-N2 bond lengths decrease much faster than any other bonds under compression, indicating that the C-NO₂ cleavage is possible to trigger the decomposition of α-FOX-7. The intra-molecular H-bonding interaction weakens at 2 and 5 GPa, which may be caused by the structural transformations, but it then strengthens with the increasing pressure up to 40 GPa. The inter-molecular H-bonding interaction strengthens with the increasing pressure. The band gap of α-FOX-7 increases at 11 GPa suddenly and decreases obviously at 19, 29, and 35 GPa, which are caused by the structural transformations. α-FOX-7 has relatively high optical activity at high pressure. All the structural transformations are endothermic and not spontaneous at room temperature.     

Comparative studies of water permeability of red blood cells from humans and over 30 animal species: an overview of 20 years of collaboration with Philip Kuchel

NMR measurements of the diffusional permeability of the human adult red blood cell (RBC) membrane to water (P _d) and of the activation energy (E _a,d) of the process furnished values of P _d ~ 4 × 10^?3 cm/s at 25 °C and ~6.1 × 10^?3 cm/s at 37 °C, and E _a,d ~ 26 kJ/mol. Comparative NMR measurements for other species showed: (1) monotremes (echidna and platypus), chicken, little penguin, and saltwater crocodile have the lowest P _d values; (2) sheep, cow, and elephant have P _d values lower than human P _d values; (3) cat, horse, alpaca, and camel have P _d values close to those of humans; (4) guinea pig, dog, dingo, agile wallaby, red-necked wallaby, Eastern grey kangaroo, and red kangaroo have P _d values higher than those of humans; (5) mouse, rat, rabbit, and “small and medium size” marsupials have the highest values of P _d (>8.0 × 10^?3 cm/s at 25 °C and >10.0 × 10^?3 cm/s at 37 °C). There are peculiarities of E _a,d values for the RBCs from different species. The maximum inhibition of diffusional permeability of RBCs induced by incubation with p-chloromercuribenzene sulfonate varied between 0 % (for the chicken and little penguin) to ~50 % (for human, mouse, cat, sheep, horse, camel, and Indian elephant), and ~60–75 % (for rat, guinea pig, rabbit, dog, alpaca, and all marsupials). These results indicate that no water channel proteins (WCPs) or aquaporins are present in the membrane of RBCs from monotremes (echidna, platypus), chicken, little penguin and saltwater crocodile whereas WCPs from the membranes of RBCs from marsupials have peculiarities.     

Treatment with 50000 IU Vitamin D2 Every Other Week and Effect on Serum 25-Hydroxyvitamin D2, 25-Hydroxyvitamin D3, and Total 25-Hydroxyvitamin D in Aclinical Setting

ObjectiveTo examine the effect of 50 000 IU-vitamin D₂ supplementation in a clinical setting on serum total 25-hydroxyvitamin D (25[OH]D), 25-hydroxyvitamin D₂ (25[OH]D₂), and 25-hydroxyvitamin D₃ (25[OH]D₃).MethodsThis retrospective cohort study was performed in an urban tertiary referral hospital in Boston, Massachusetts. Patients who had been prescribed 50 000 IU vitamin D₂ repletion and maintenance programs were identified through a search of our electronic medical record. Baseline and follow-up total serum 25(OH)D, 25(OH)D₂, and 25(OH)D₃ levels were compared.ResultsWe examined the medical records of 48 patients who had been prescribed 50 000 IU vitamin D₂ in our clinic. Mean ± standard deviation baseline total 25(OH) D was 31.0 ± 10.6 ng/mL and rose to 48.3 ± 13.4 ng/mL after treatment (P <.001). 25(OH)D₂ increased from 4.2 ± 4.3 ng/mL to 34.6 ± 12.3 ng/mL after treatment (P <.001), for an average of 158 days (range, 35-735 days). Serum 25(OH)D3 decreased from 26.8 ± 10.8 ng/mL to 13.7 ± 7.9 ng/mL (P <.001).ConclusionsFifty thousand IU vitamin D₂ repletion and maintenance therapy substantially increases total 25(OH)D and 25(OH)D2 despite a decrease in serum 25(OH)D3. This treatment program is an appropriate and effective strategy to treat and prevent vitamin D deficiency.(Endocr Pract. 2012;18:399-402)     

Conjugation in multi-tetrazole derivatives: a new design direction for energetic materials

Multi-tetrazole derivatives with conjugated structures were designed and investigated in this study. Using quantum chemistry methods, the crystal structures, electrostatic potentials (ESPs), multicenter bond orders, HOMO–LUMO energy gaps, and detonation properties of the derivatives were calculated. As expected, these molecules with conjugated structures showed low energies of their crystal structures, molecular layering in their crystals, high average ESPs, high multicenter bond order values, and enhanced detonation properties. The derivative 1,2-di(1H-tetrazol-5-yl)diazene (N2) was predicted to have the best density (1.87 g/cm³), detonation velocity (9006 m/s), and detonation pressure (36.8 GPa) of the designed molecules, while its total crystal energy was low, suggesting that it is relatively stable. Its sensitivity was also low, as the molecular stacking that occurs in its crystal allows external forces to be dissipated into movements of crystal layers. Finally, its multicenter bond order was high, indicating a highly conjugated structure.