Flexibility regeneration of silk fibroin in vitro

Although natural silk fibers have excellent strength and flexibility, the regenerated silk materials generally become brittle in the dry state. How to reconstruct the flexibility for silk fibroin has bewildered scientists for many years. In the present study, the flexible regenerated silk fibroin films were achieved by simulating the natural forming and spinning process. Silk fibroin films composed of silk I structure were first prepared by slow drying process. Then, the silk fibroin films were stretched in the wet state, following the structural transition from silk I to silk II. The difference between the flexible film and different brittle regenerated films was investigated to reveal the critical factors in regulating the flexibility of regenerated silk materials. Compared with the methanol-treated silk films, although having similar silk II structure and water content, the flexible silk films contained more bound water rather than free water, implying the great influence of bound water on the flexibility. Then, further studies revealed that the distribution of bound water was also a critical factor in improving silk flexibility in the dry state, which could be regulated by the nanoassembly of silk fibroin. Importantly, the results further elucidate the relation between mechanical properties and silk fibroin structures, pointing to a new mode of generating new types of silk materials with enhanced mechanical properties in the dry state, which would facilitate the fabrication and application of regenerated silk fibroin materials in different fields.     

X-ray photoelectron spectroscopic and Raman analysis of silk fibroin-Cu(II) films

There is evidence to suggest that Cu(II) is involved in the natural spinning process of a silkworm helping to convert the concentrated silk fibroin (SF) solution (or dope) into tough insoluble threads. To investigate the interaction between SF and Cu(II), a series of regenerated SF (RSF) films with different mass ratios of Cu(II) to SF were prepared. X-ray photoelectron spectroscopy (XPS) was employed to study the chemical interaction between Cu(II) and SF in these Cu(II)-RSF films. A significant change in the binding energy of Cu 2p(3/2) demonstrated that the chemical state of Cu(II) in the Cu(II)-RSF films was affected by the interaction between Cu(II) and SF. Moreover, chemical shifts of N 1s and O 1s of SF were also detected, implying that Cu(II) may coordinate with both N and O atoms in the SF. In addition, Raman spectra of the same series of Cu(II)-RSF films recorded the conformation transition of SF that may occur by the coordination of Cu(II) and SF macromolecular chains.     

Effects of pH and calcium ions on the conformational transitions in silk fibroin using 2D Raman correlation spectroscopy and 13C solid-state NMR

Silk fibroin exists in a number of different states, such as silk I and silk II, with different properties largely defined by differences in secondary structure composition. Numerous attempts have been made to control the transitions from silk I to silk II in vitro to produce high-performance materials. Of all the factors influencing the structural compositions, pH and some metal ions play important roles. This paper focuses on the influence of pH and Ca(2+) ions on the conformational transition from silk I to silk II in regenerated (redissolved) Bombyx mori fibroin. One- and two-dimensional correlation Raman spectroscopy was used to describe qualitatively the transitions in secondary structure in silk I, silk II, and their intermediates as pH and Ca(2+) ion concentration were changed, while (13)C cross polarization magic angle spinning (CP/MAS) solid-state NMR was used to quantify these changes. We showed that conditions (low pH, pH 5.2; a defined range of Ca(2+) ion concentrations; gradual water removal) that mimic natural silk spinning promote the formations of beta-sheet and distorted beta-sheet characteristic of silk II or silk II-related intermediate. In contrast, higher pH (pH 6.9-8.0) and higher Ca(2+) ion concentrations maintain "random coil" conformations typical of silk I or silk I-related intermediate. These results help to explain why the natural silk spinning process is attended by a reduction in pH from 6.9 to 4.8 and a change in the Ca(2+) ion concentration in the gland lumen as fibroin passes from the posterior division through the secretory pathway to the anterior division.     

Raman study of poly(alanine-glycine)-based peptides containing tyrosine, valine, and serine as model for the semicrystalline domains of Bombyx mori silk fibroin

For a deeper insight into the structure of Bombyx mori silk fibroin, some model peptides containing tyrosine (Y), valine (V), and serine (S) in the basic (AG)n sequence were synthesized by the solid-phase method and analyzed by Raman spectroscopy in order to clarify their conformation and to evaluate the formation and/or disruption of the ordered structure typical of B. mori silk fibroin upon incorporation of Y, V, and S residues into the basic (AG)n sequence. The Raman results indicated that the silk I structure remains stable only when the Y residue is positioned near the chain terminus; otherwise, a silk I --> silk II conformational transition occurs. The peptides AGVGAGYGAGVGAGYGAGVGAGYG(AG)3 and (AG)3YG(AG)2VGYG(AG)3YG(AG)3 treated with LiBr revealed a prevalent silk II conformation; moreover, the former contained a higher amount of random coil than the latter. This result was explained in relation to the different degrees of interruption of the (AG)n sequence. The Raman analysis of the AGSGAG-containing samples confirmed that the AGSGAG hexapeptide is a good model for the silk II crystalline domain. As the number of AGSGAG repeating units decreased, the random coil content increased. The study of the Y domain (I850/I830 intensity ratio) allowed us to hypothesize that in the packing characteristic of Silk I and Silk II conformations the Y residues experience different environments and hydrogen-bonding arrangements; the packing typical of silk I structure traps the tyrosyl side chains in environments more unfavorable to phenoxyl hydrogen-bonding interactions.     

Morphology and structure of electrospun mats from regenerated silk fibroin aqueous solutions with adjusting pH

In this paper, regenerated silk fibroin (SF) aqueous solutions were adjusted to a pH of 6.9 by mimicing the condition in the posterior division of silkworm's gland and rheological behavior of solutions was investigated. The electrospinning technique was used to prepare fibers, and non-woven mats of regenerated B. mori silk fibroin were successfully obtained. The effects of electrospinning parameters on the morphology and diameter of regenerated silk fibers were investigated by orthogonal design. Statistical analysis showed that voltage, the concentration of regenerated SF solutions and the distance between tip and collection plate were the most dominant parameters to fiber morphology, diameter and diameter distribution, respectively. An optimal electrospinning condition was obtained in producing uniform cylindrical fibers with an average diameter of 1300nm. It was as follows: the concentration 30%, voltage 40kV, distance 20cm. The structure of electrospun mats was characterized by Raman spectroscopy (RS), wide-angle X-ray diffraction (WAXD) and modulated differential scanning calorimetry (MDSC). It was found that electrospun mats were predominantly random coil/silk I structure, and the transition to silk II (beta-sheet) rich structure should be further explored.     

Effect of EGCG On Fe(III)‐induced conformational transition of silk fibroin,a model of protein related to neurodegenerative diseases

The abnormal aggregation of amyloid proteins is reported to play a critical role in the etiology of neurodegenerative disorders. Studies have shown that excessive ferric irons are associated with the misfolding of amyloid proteins, and that (‐)‐epigallocatechin gallate (EGCG) is a good metallic ion chelator with inhibitory effect on the aggregation of amyloid proteins. EGCG has been thus considered as a potential drug candidate for the treatment of neurodegenerative diseases. However, the mechanism of action for EGCG in inhibition of aggregation of amyloid proteins is still remaining unclear. Silk fibroin (SF) shares similarities with amyloid proteins in some amino acid sequences and fibrillation kinetics. In this work, therefore, we used SF as a model of protein to investigate the effects of Fe(III) and EGCG on conformational transition by using turbidity assay, thioflavin T (ThT) fluorescence spectroscopy, Raman spectroscopy, and atomic force microscope (AFM). We demonstrated that low concentration of Fe(III) ions promoted the formation of β‐sheet conformers, while high concentration of Fe(III) ions inhibited further aggregation of SF. EGCG could significantly inhibit the conformational transition of SF when induced by Fe(III), and decrease the amount of β‐sheet conformers dose‐dependently. The findings provide important information regarding to EGCG as a potential agent for the prevention and treatment of neurodegenerative diseases. Fe(III) can accelerate the conformation transition of silk fibrion (SF) from random coil into β‐sheet, while (‐)‐epigallocatechin gallate (EGCG) inhibits Fe(III)‐induced β‐sheet aggregation of SF., 2016. © 2015 Wiley Periodicals, Inc. Biopolymers 105: 100–107, 2016     

Fabrication and characterization of biomaterial film from gland silk of muga and eri silkworms

This study discusses the possibilities of liquid silk (Silk gland silk) of Muga and Eri silk, the indigenous non mulberry silkworms of North Eastern region of India, as potential biomaterials. Silk protein fibroin of Bombyx mori, commonly known as mulberry silkworm, has been extensively studied as a versatile biomaterial. As properties of different silk‐based biomaterials vary significantly, it is important to characterize the non mulberry silkworms also in this aspect. Fibroin was extracted from the posterior silk gland of full grown fifth instars larvae, and 2D film was fabricated using standard methods. The films were characterized using SEM, Dynamic contact angle test, FTIR, XRD, DSC, and TGA and compared with respective silk fibers. SEM images of films reveal presence of some globules and filamentous structure. Films of both the silkworms were found to be amorphous with random coil conformation, hydrophobic in nature, and resistant to organic solvents. Non mulberry silk films had higher thermal resistance than mulberry silk. Fibers were thermally more stable than the films. This study provides insight into the new arena of research in application of liquid silk of non mulberry silkworms as biomaterials. © 2012 Wiley Periodicals, Inc. Biopolymers 99: 292–333, 2013.     

Silk fibroin film from golden‐yellow Bombyx mori is a biocomposite that contains lutein and promotes axonal growth of primary neurons

The use of doped silk fibroin (SF) films and substrates from Bombyx mori cocoons for green nanotechnology and biomedical applications has been recently highlighted. Cocoons from coloured strains of B. mori, such as Golden‐Yellow, contain high levels of pigments that could have a huge potential for the fabrication of SF based biomaterials targeted to photonics, optoelectronics and neuroregenerative medicine. However, the features of extracted and regenerated SF from cocoons of B. mori Golden‐Yellow strain have never been reported. Here we provide a chemophysical characterization of regenerated silk fibroin (RSF) fibers, solution, and films obtained from cocoons of a Golden‐Yellow strain of B. mori, by SEM, ¹H‐NMR, HPLC, FT‐IR, Raman and UV‐Vis spectroscopy. We found that the extracted solution and films from B. mori Golden‐Yellow fibroin displayed typical Raman spectroscopic and optical features of carotenoids. HPLC‐analyses revealed that lutein was the carotenoid contained in the fiber and RSF biopolymer from yellow cocoons. Notably, primary neurons cultured on yellow SF displayed a threefold higher neurite length than those grown of white SF films. The results we report pave the way to expand the potential use of yellow SF in the field of neuroregenerative medicine and provide green chemistry approaches in biomedicine. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 287–299, 2016.     

Enzymatic grafting of chitosan onto Bombyx mori silk fibroin: kinetic and IR vibrational studies

The potential for using tyrosinase to graft the polysaccharide chitosan (Ch) onto Bombyx mori silk fibroin (SF) was examined. FT-IR spectroscopy coupled to HPLC amino acid analysis showed that mushroom tyrosinase (MT) catalyses the oxidation of tyrosine (Tyr) of SF to electrophilic o-quinones. Kinetic studies showed that only a fraction of the Tyr residues available on the SF chain were oxidized. This result was interpreted in the light of the structure assumed by SF in aqueous solution: Tyr aromatic side chain groups buried into the folded hydrophobic portions of the chain were probably less accessible to MT for steric reasons. Using slightly acidic conditions (pH 6), it was possible to modify SF under homogeneous conditions. FT-IR spectroscopy provided evidence that Ch was grafted onto MT-oxidized SF: the o-quinones were found to undergo a subsequent non-enzymatic reaction with nucleophilic amino groups of Ch via Schiff-base and Michael addition mechanisms. Various factors, i.e. reaction time, pH, MT/SF ratio, were found to influence the grafting yield. The highest grafting yield was achieved at pH 7, i.e. more favorable to MT activity rather than to Ch solubility, suggesting that the determining step of the grafting reaction is the formation of o-quinones. The FT-IR spectroscopy revealed that grafting induced a beta-sheet --> random coil conformational transition.     

Solubility and rheological behavior of silk fibroin (Bombyx mori) in N-methyl morpholine N-oxide

As an important direct solvent for cellulose, N-methyl morpholine N-oxide (NMMO) is environmentally friendly, and potentially very economical. Silk fibroin (SF) (Bombyx mori) can also be dissolved directly in NMMO.H2O. However, it is unexpectedly difficult to obtain a silk fibroin solution with a concentration higher than 10wt.% in this way, and extensive degradation of silk fibroin occurs if the dissolution temperature is higher than 110 degrees C. On the other hand, it is found that regenerated silk fibroin (RSF) film is much easier to dissolve in NMMO.H2O than ordinary SF. The RSF in NMMO.H2O can be easily concentrated to a range from 10 to 25wt.%. The structural differences between the degummed silk fiber and the RSF film lead to this different solubility in NMMO.H2O. The rheological behavior of concentrated RSF/NMMO.H2O solutions were also investigated. Regenerated silk fiber was spun from this type of solution, and its strength can reach up to 3.07 cN/dtex.     

Nanofibrous nonmulberry silk/PVA scaffold for osteoinduction and osseointegration

Poly‐vinyl alcohol and nonmulberry tasar silk fibroin of Antheraea mylitta are blended to fabricate nanofibrous scaffolds for bone regeneration. Nanofibrous matrices are prepared by electrospinning the equal volume ratio blends of silk fibroin (2 and 4 wt%) with poly‐vinyl alcohol solution (10 wt%) and designated as 2SF/PVA and 4SF/PVA, respectively with average nanofiber diameters of 177 ± 13 nm (2SF/PVA) and 193 ± 17 nm (4SF/PVA). Fourier transform infrared spectroscopy confirms retention of the secondary structure of fibroin in blends indicating the structural stability of neo‐matrix. Both thermal stability and contact angle of the blends decrease with increasing fibroin percentage. Conversely, fibroin imparts mechanical stability to the blends; greater tensile strength is observed with increasing fibroin concentration. Blended scaffolds are biodegradable and support well the neo‐bone matrix synthesis by human osteoblast like cells. The findings indicate the potentiality of nanofibrous scaffolds of nonmulberry fibroin as bone scaffolding material. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 271–284, 2015.     

Structural characteristics and properties of the regenerated silk fibroin prepared from formic acid

Structural characteristics and thermal and solution properties of the regenerated silk fibroin (SF) prepared from formic acid (FU) were compared with those of SF from water (AU). According to the turbidity and shear viscosity measurement, SF formic acid solution was stable and transparent, no molecular aggregations occurred. The sample FU exhibited the beta-sheet structure, while AU random coil conformation using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry. The effects of methanol treatment on samples were also examined. According to the measurement of crystallinity (XRD) and crystallinity index (FTIR), the concept of long/short-range ordered structure formation was proposed. Long-range ordered crystallites are predominantly formed for methanol treated SF film while SF film cast from formic acid favors the formation of short-range ordered structure. The relaxation temperatures of SF films measured by dynamic thermomechanical analysis supported the above mechanism due to the sensitivity of relaxation temperature on the short-range order.     

Non-bioengineered silk gland fibroin protein: characterization and evaluation of matrices for potential tissue engineering applications

The possibility of using wild non-mulberry silk protein as a biopolymer remains unexplored compared to domesticated mulberry silk protein. One of the main reasons for this was for not having any suitable method of extraction of silk protein fibroin from cocoons and silk glands. In this study non-bioengineered non-mulberry silk gland fibroin protein from tropical tasar silkworm Antheraea mylitta, is regenerated and characterized using 1% (w/v) sodium dodecyl sulfate (SDS). The new technique is important and unique because it uses a mild surfactant for fibroin dissolution and is advantageous over other previous reported techniques using chaotropic salts. Fabricated fibroin films are smooth as confirmed by atomic force microscopy. Circular dichroism spectrometry along with Fourier transformed infrared spectroscopy and X-ray diffraction reveal random coil/alpha-helix conformations in regenerated fibroin which transform to beta-sheets, resulting in crystalline structure and protein insolubility through ethanol treatment. Differential scanning calorimetry shows an increase in glass transition (Tg) temperature and enhanced degradation temperature on alcohol treatment. Enhanced cell attachment and viability of AH927 feline fibroblasts were observed on fibroin matrices. Higher mechanical strength along with controllable water stability of regenerated gland fibroin films make non-mulberry Indian tropical tasar silk gland fibroin protein a promising biomaterial for tissue engineering applications.     

A study on the flow stability of regenerated silk fibroin aqueous solution

The flow stability of silk fibroin (SF) aqueous solutions with different concentrations under different temperatures was investigated. It was found that the flow stability decreased quickly with the increase of solution concentration and temperature. X-ray diffraction, Fourier transform infrared (FTIR) and Raman spectroscopy analysis showed that silk fibroin in aqueous solution was mainly in random coil and alpha-helix conformation. However, it turned into alpha-helix and beta-sheet conformation after gelation, and both silk I and silk II crystalline structures appeared accordingly. The investigation implies that the original dilute regenerated SF aqueous solution should be stored under low temperature and concentrated just before spinning.     

X-ray evidence for a "super"-secondary structure in silk fibers

X-ray studies on degummed B. mori silk fibers and on hydrogels prepared under a variety of conditions reveal moderately small angle reflections. These reflections are often highly oriented and are correlated to silk II lattice reflections. A superstructure can explain these features. Silk fibroin hydrogels were monitored as they dried to form the silk II structure. The silk II wide angle and moderately small angle patterns obtained from dried hydrogels and silk fibers are identical. The "superstructure" reflections at moderately small angle (3-7 nm) were first to appear, followed by the "intersheet" spacing, and then the remainder of the silk II wide angle scattering pattern. Thus, any superstructure hypothesized for the hydrogels (and for Silk II in fibers) must be both stable in a highly hydrated environment and must convert to silk II with little large scale diffusion. A folded structure, similar to amyloids and cross-beta-sheets but with much longer beta-strand stems, is proposed for silk II in fibers.     

Phosphorylation of silk fibroins improves the cytocompatibility of silk fibroin derived materials: A platform for the production of tuneable material

Silk fibroin demonstrates great biocompatibility and is suitable for many biomedical applications, including tissue engineering and regenerative medicine. Current research focuses on manipulating the physico‐chemical properties of fibroin, and examining the effect of this manipulation on firobin's biocompatibility. Regenerated silk fibroin was modified by in vitro enzymatic phosphorylation and cast into films. Films were produced by blending, at several ratios, the phosphorylated and un‐phosphorylated fibroin solutions. Fourier transform infra‐red spectroscopy was used to determine the specific P–OH vibration peak, confirming the phosphorylation of the regenerated silk fibroin solution. Differential scanning calorimetry showed that phosphorylation altered the intra‐ and inter‐molecular interactions. Further experiments demonstrated that phosphorylation can be used to tailor the hydrophylicity/hydrophobicity ratio as well as the crystalinity of silk fibroin films. Release profiling of a model drug was highly dependent on silk modification level. Cytotoxicity assays showed that exposure to lixiviates of phosphorylated films only slightly affected cellular metabolism and proliferation, although direct contact resulted in a strong direct correlation between phosphorylation level and cell proliferation. This new method for tuning silk biomaterials to obtain specific structural and biochemical features can be adapted for a wide range of applications. Phosphorylation of silk fibroins may be applied to improve the cytocompatibility of any silk‐based device that is considered to be in contact with live animals or human tissues.     

Biodegradable materials based on silk fibroin and keratin

Wool and silk were dissolved and used for the preparation of blended films. Two systems are proposed: (1) blend films of silk fibroin and keratin aqueous solutions and (2) silk fibroin and keratin dissolved in formic acid. The FTIR spectra of pure films cast from aqueous solutions indicated that the keratin secondary structure mainly consists of alpha-helix and random coil conformations. The IR spectrum of pure SF is characteristic of films with prevalently amorphous structure (random coil conformation). Pure keratin film cast from formic acid shows an increase in the amount of beta-sheet and disordered keratin structures. The FTIR pattern of SF dissolved in formic acid is characteristic of films with prevalently beta-sheet conformations with beta-sheet crystallites embedded in an amorphous matrix. The thermal behavior of the blends confirmed the FTIR results. DSC curve of pure SF is typical of amorphous SF and the curve of pure keratin show the characteristic melting peak of alpha-helices for the aqueous system. These patterns are no longer observed in the films cast from formic acid due to the ability of formic acid to induce crystallization of SF and to increase the amount of beta-sheet structures on keratin. The nonlinear trend of the different parameters obtained from FTIR analysis and DSC curves of both SF/keratin systems indicate that when proteins are mixed they do not follow additives rules but are able to establish intermolecular interactions. Degradable polymeric biomaterials are preferred candidates for medical applications. It was investigated the degradation behavior of both SF/keratin systems by in vitro enzymatic incubation with trypsin. The SF/keratin films cast from water underwent a slower biological degradation than the films cast from formic acid. The weight loss obtained is a function of the amount of keratin in the blend. This study encourages the further investigation of the type of matrices presented here to be applied whether in scaffolds for tissue engineering or as controlled release drug delivery vehicles.     

Conformational transitions in model silk peptides

Protein structural transitions and beta-sheet formation are a common problem both in vivo and in vitro and are of critical relevance in disparate areas such as protein processing and beta-amyloid and prion behavior. Silks provide a "databank" of well-characterized polymorphic sequences, acting as a window onto structural transitions. Peptides with conformationally polymorphic silk-like sequences, expected to exhibit an intractable beta-sheet form, were characterized using Fourier transform infrared spectroscopy, circular dichroism, and electron diffraction. Polymorphs resembling the silk I, silk II (beta-sheet), and silk III (threefold polyglycine II-like helix) crystal structures were identified for the peptide fibroin C (GAGAGS repetitive sequence). Two peptides based on silk amorphous sequences, fibroin A (GAGAGY) and fibroin V (GDVGGAGATGGS), crystallized as silk I under most conditions. Methanol treatment of fibroin A resulted in a gradual transition from silk I to silk II, with an intermediate state involving a high proportion of beta-turns. Attenuated total reflectance Fourier transform infrared spectroscopy has been used to observe conformational changes as the peptides adsorb from solution onto a hydrophobic surface. Fibroin C has a beta-strand structure in solution but adopts a silk I-like structure upon adsorption, which when dried on the ZnSe crystal contains silk III crystallites.     

Conformation transition kinetics of Bombyx mori silk protein

Time-resolved FTIR analysis was used to monitor the conformation transition induced by treating regenerated Bombyx mori silk fibroin films and solutions with different concentrations of ethanol. The resulting curves showing the kinetics of the transition for both films and fibroin solutions were influenced by the ethanol concentration. In addition, for silk fibroin solutions the protein concentration also had an effect on the kinetics. At low ethanol concentrations (for example, less than 40% v/v in the case of film), films and fibroin solutions showed a phase in which beta-sheets slowly formed at a rate dependent on the ethanol concentration. Reducing the concentration of the fibroin in solutions also slowed the formation of beta-sheets. These observations suggest that this phase represents a nucleation step. Such a nucleation phase was not seen in the conformation transition at ethanol concentrations > 40% in films or > 50% in silk fibroin solutions. Our results indicate that the ethanol-induced conformation transition of silk fibroin in films and solutions is a three-phase process. The first phase is the initiation of beta-sheet structure (nucleation), the second is a fast phase of beta-sheet growth while the third phase represents a slow perfection of previously formed beta-sheet structure. The nucleation step can be very fast or relatively slow, depending on factors that influence protein chain mobility and intermolecular hydrogen bond formation. The findings give support to the previous evidence that natural silk spinning in silkworms is nucleation-dependent, and that silkworms (like spiders) use concentrated silk protein solutions, and careful control of the pH value and metallic ion content of the processing environment to speed up the nucleation step to produce a rapid conformation transition to convert the water soluble spinning dope to a tough solid silk fiber.     

Tyrosinase-catalyzed modification of Bombyx mori silk fibroin: grafting of chitosan under heterogeneous reaction conditions

The capability of mushroom tyrosinase to catalyze the oxidation of tyrosine residues of Bombyx mori silk fibroin was studied under heterogeneous reaction conditions, by using a series of silk substrates differing in surface and bulk morphology and structure, i.e. hydrated and insoluble gels, mechanically generated powder and fibre. Tyrosinase was able to oxidize 10-11% of the tyrosine residues of silk gels. The yield of the reaction was very low for the powder and undetectable for fibres. FT-Raman spectroscopy gave evidence of the oxidation reaction. New bands attributable to vibrations of oxidized tyrosine species (o-quinone) appeared, and the value of the I853/I829 intensity ratio of the tyrosine doublet changed following oxidation of tyrosine. The thermal behaviour of SF substrates was not affected by enzymatic oxidation. o-Quinones formed by tyrosinase onto gels and powder were able to undergo non-enzymatic coupling with chitosan. FT-IR and FT-Raman spectroscopy provided clear evidence of the formation of silk-chitosan bioconjugates under heterogeneous reaction conditions. Chitosan grafting caused a beta-sheet --> random coil conformational transition of silk fibroin and significant changes in the thermal behaviour. Chitosan grafting did not occur, or occurred at an undetectable level on silk fibres. The results reported in this study show the potential of the enzymatically initiated protein-polysaccharide grafting for the production of a new range of bio-based, environmentally friendly polymers.