Location of rep and inc sequences in the F secondary replicon

Miniplasmids derived by deletion of DNA from the F plasmid secondary replicon have been tested for the ability to replicate and to express incompatibility with the IncFI plasmid, ColV3-K30. The results demonstrate that the minimal rep region of the secondary replicon lies within a 1.9-kb sequence (33.7F-35.6F kb), and that an inc region, presumably involved in replication control, is present in a 0.45-kb portion of the rep region (33.7F-34.15F kb). In addition, the secondary replicon was found not to require DNA polymerase I activity.     

Characterization of the maintenance functions of IncFIV plasmid R124

The genetic arrangement of the regions involved in R124 replication and incompatibility have been located and their homology to the IncFI basic replicons has been assessed. We show that R124 has homology with all three basic replicons, RepFIA, RepFIB, and RepFIC, and that these regions, FIVA, RepFIVB, and RepFIVC, are widely separated on the R124 genome. Cloning of autonomously replicating fragments has shown that RepFIVB and RepFIVC are functional in R124 and express incompatibility. The FIVA region was unable to form a functional replicon and when cloned into pUC8 lacked incompatibility activity. A fourth region of R124 was identified, which although not essential for replication stabilized mini-R124 plasmid replication and exhibited incompatibility with R124. This region, designated IncIV, showed no homology to RepFIA, RepFIB, or RepFIC. Incompatibility expression of IncIV required only the EcoRI fragment E13 but the strength of the reaction was modified in the presence of other fragments. The replication and incompatibility properties of an R124 deletion derivative indicated that R124 can switch its replication to either RepFIVB or RepFIVC when in the presence of an incompatible plasmid. The ambiguous incompatibility reactions reported for R124 is a result of the expression of the two functional replicons, RepFIVB and RepFIVC, and that expressed by IncIV.     

Nucleotide sequence analysis of RepFIC, a basic replicon present in IncFI plasmids P307 and F, and its relation to the RepA replicon of IncFII plasmids.

RepFIC is a basic replicon of IncFI plasmid P307 which is located within a 3.09-kilobase SmaI fragment. The nucleotide sequence of this region has been determined and shown to be homologous with the RepFIIA replicon of IncFII plasmids. The two replicons share three homologous regions, HRI, HRII, and HRIII, which are flanked by two nonhomologous regions, NHRI and NHRII. A comparison of coding regions reveals that the two replicons have several features in common. RepFIC, like RepFIIA, codes for a repA2 protein with its amino-terminal codons in HRI and its carboxy-terminal codons in NHRI. Although the codons for the repA1 proteins are located in NHRII, the DNA region containing a putative promoter, ribosomal binding site, and initiation codons is located in HRII. This region also codes for an inc RNA. There are nine base-pair differences between the inc RNA of RepFIIA and that of RepFIC, and as a result, RepFIC and RepFIIA replicons are compatible. An EcoRI fragment from the F plasmid which shows homology with RepFIC of P307 has also been sequenced. This fragment contains only a portion of RepFIC, including the genes for the putative repA2 protein and inc RNA. The region coding for a putative repA1 protein is interrupted by the transposon Tn1000 and shows no homology with the repA1 region of RepFIIA and RepFIC of P307. Our comparative and structural analyses suggest that RepFIC and RepFIIA, although different, have a similar replication mechanism and thus can be assigned to the same replicon family, which we designate the RepFIIA family.     

Cloning and sequence analysis of a plasmid replicon from Lactococcus lactis subsp. cremoris FG2

A replication region from one of the Lactococcus lactis subsp. cremoris FG2 plasmids was isolated by cloning of a 4.8-kb XbaI fragment into a replication probe vector and transformation into L. lactis LM0230. A 1.8-kb region within this fragment was sequenced and confirmed by PCR subcloning to encode a functional replicon in LM0230. The replicon consists of an open reading frame encoding a putative replication protein (Rep) of 386 amino acids and a non-coding region (ori) which features several structural motifs typical of other known replication origins, including a 22-bp iteron sequence tandemly repeated three and a half times, a 10-bp direct repeat and two sets of inverted repeats. The ori region could drive replication of its plasmid when supplied with the replication region in-trans. The lack of detectable single-stranded DNA during replication and the existence of extensive homology with other known lactococcal theta replicons strongly suggest that this region encodes a theta-replicating mechanism.     

Incompatibility between Flac, R386, and F:pSC101 recombinant plasmids: the specificity of F incompatibility genes.

The specificity of F incompatibility genes (inc⁺) has been studied with the Flac and R386 plasmids, members of the IncFI incompatibility group. Recently, two inc⁺ regions, incA (46.4–49.3F) and incB (43.1–46.4F) were identified by cloning these F sequences onto pSC101 and subsequently demonstrating incompatibility of the recombinants with Flac. It is shown here that the FincA⁺ recombinant is incompatible with both Flac and R386 while the FincB⁺ recombinant is incompatible only with Flac. Also, a plasmid mutant is described that has reduced incompatibility against Flac and R386. The mutation is located on the BamHI restriction fragment that contains the FincA region. These genetic findings are consistent with the deduction of Palchaudhuri and Maas, based on heteroduplex analysis of IncFI plasmids, that placed the IncFI determinant in the 46.4–48.6F region. The findings also indicate that the FincB⁺ gene product, which has been implicated in negative control of F copy number, is specific for the F replicon.     

Second replicon in ColV2-K94 mediates the stable coexistence of two incompatible plasmids.

The colicin-producing plasmid pWS12, a Tn903 derivative of ColV2-K94, was found to be incompatible with the IncFI plasmids KLF1 and R386. It was compatible with the IncFII plasmids R538 and R100. Three overlapping mini-ColV derivatives, pWS15, pWS16 and pWS17, were obtained by restriction digestion of pWS12. Unlike pWS12, pWS16 exhibited incompatibility with both IncFI and IncFII plasmids, whereas the pWS15 and pWS17 plasmids expressed IncFII incompatibility but not the IncFI incompatibility of their parental ColV plasmid. We show that, although pWS12 has an IncFII replicon, Rep1, it does not normally express IncFII incompatibility because a second replicon, Rep2 (homologous to the secondary replicon of F), functions during the stable coexistence of the plasmid with IncFII plasmids. When Rep2 is deleted (as in the mini-ColV plasmids) or made nonfunctional (as in a PolA mutant strain), ColV then behaves as an IncFII plasmid.     

Distribution of plasmid maintenance regions among IncFIV plasmids

The distribution of the IncFI basic replicons among IncFIV plasmids was assessed by DNA hybridization. In addition these and 20 other plasmids from 16 incompatibility groups were screened for the presence of IncIV, an incompatibility determinant recently found on the IncFIV plasmid R124. The IncIV determinant was found commonly but not universally among the IncFIV plasmids. It was also detected on the IncFI reference plasmid R386 and plasmids from IncB, IncI alpha and IncI gamma. The frequency and distribution of IncFI replicons among the IncFIV plasmids is similar to that observed in other F groups. The similarity of the IncFIV plasmids to plasmids of the other IncF groups and the failure to find replicons unique to IncFIV plasmids indicates that their division into a separate incompatibility group is not justified.     

Molecular homology and incompatibility in the IncFI plasmid Group

The usual grounds for the inclusion of a plasmid in a particular incompatibility group are its mutual incompatibility with a type plasmid of that group, and, in some cases, the demonstration of shared regions of specific homology, presumed to be related to DNA replication. We have found that some plasmids classified as IncFI on genetical grounds share no homology with the previously described incompatibility regions of F on the basis of hybridization of specific radioactive probes to restriction enzyme digests of DNA from these plasmids. Others show homology with some or all of the regions of the F plasmid that can express incompatibility. The incompatibility behaviour of these plasmids has been examined to determine the relationship between the possession of regions of homology and the expression of incompatibility. Three plasmids, ColV3-K30, pHH507 and Entp307, show homology only with the secondary replicon of F and appear to use sequences homologous with the secondary F replicon in their replication. The results are consistent with the propositions that some contemporary IncFI plasmids arose by the integration of several replicons, and, in general, the replicon not being used for replicon expresses its incompatibility, as does the replicon being used for replication. We conclude that incompatibility of two plasmids with F does not necessarily demonstrate relatedness of the plasmids to each other, and that inclusion within the IncFI group can result from the possession of any of several combinations of inc sequences.     

RepFIC, a basic replicon of IncFI plasmids that has homology with a basic replicon of IncFII plasmids

It was found that a DNA segment containing genes for autonomous replication and its control (basic replicon) present in the IncFI plasmid P307 has homology with RepA, a basic replicon present in IncFII plasmids. The basic replicon in P307 is referred to as RepFIC and the homologous basic replicon in IncFII plasmids is referred to as RepFIIA. In 11 other IncFI plasmids studied a region that has homology with RepFIC and RepFIIA was demonstrated. Thus, of the several basic replicons present in IncFI plasmids, RepFIC is evolutionarily related to a basic replicon of IncFII plasmids.     

Study of the incompatibility and replication of the 70-kb virulence plasmid of Yersinia

The 70-kb virulence plasmid, vir, from four Yersinia enterocolitica and one Y. pseudotuberculosis strains are incompatible with IncFI plasmids FLac and R386 while they are compatible with plasmids representing nine other incompatibility groups. Hybridization experiments carried out on one of these virulence plasmids showed that it contains the F incompatibility determinant D, incD. This determinant was cloned onto pACYC184 and the recombinant clone expressed incompatibility with FLac. We conclude that the incompatibility observed between F or R386 and the 70-kb virulence plasmid of Y. enterocolitica and Y. pseudotuberculosis is mediated by incD. Replication genes (rep) from the same plasmid were cloned independently in Escherichia coli. Rep and incD map on two different BamHI fragments. Surprisingly, the replicon isolated is not sensitive to inc D incompatibility. Apart from incD, vir and F share extremely little homology. In particular, there is no evidence for the presence of an F-like transfer operon on vir.     

Isolation of the replication and partitioning regions of the Salmonella typhimurium virulence plasmid and stabilization of heterologous replicons.

Although the virulence plasmid of Salmonella typhimurium has a copy number of one to two per chromosome, plasmid-free segregants are produced at a rate less than 10(-7) per cell per generation. Three regions appear to be involved in the maintenance of this virulence plasmid. The first two, repB and repC, are functional replicons hybridizing with IncFII and IncFI plasmids, respectively, neither exhibiting the segregational stability of the parent virulence plasmid. The third region, par, cloned as a 3.9-kilobase Sau3A fragment, is not a functional replicon but exhibits incompatibility with the virulence plasmid. Subsequent tests revealed the ability of this 3.9-kilobase par insert to increase the stability of pACYC184 in S. typhimurium from less than 34% to 99% plasmid-containing cells after 50 generations. In addition, the par region increased the stability of oriC, R388, and repC replicons in both S. typhimurium and Escherichia coli hosts. The par region encodes 44,000- and 40,000-molecular-weight proteins essential for the Par+ phenotype but not for the Inc+ phenotype. Although actual sequestering of plasmids within the cell was not demonstrated, all results indicate that the par region described is an actual partitioning locus, similar in organization to those described for plasmids F, P1, and NR1.     

Molecular homology and incompatibility relationships between F and IncH1 plasmids

IncH1 plasmids and the F plasmid of Escherichia coli display one-way compatibility. An entering IncH1 plasmid is incompatible with a resident F plasmid, but is compatible when it is the resident plasmid. There is little molecular homology between IncH1 plasmids and the F plasmid. A single 5 MDal EcoRI restriction enzyme fragment from digests of several IncH1 plasmids hybridizes with probes constructed from the primary replication region of F. Homology can be demonstrated only with the gene for the essential replication protein of F (gene E), but the expression of incompatibility behaviour appears to be associated with the presence of the secondary replicon of the F plasmid. Thus R27 and F are compatible under growth conditions allowing replication and maintenance of F by the secondary replicon. However, a mutant F plasmid which lacks the secondary replicon of F is incompatible with R27 in both directions, irrespective of the growth conditions used.     

The minimal replicon of a Streptomycete plasmid produces an ultrahigh level of plasmid DNA

A functional map of Streptomyces coelicolor plasmid SCP2* was deduced from derivatives constructed by in vitro deletions. Functions were analyzed on bifunctional shuttle plasmids that contained pBR322 for selection and replication in Escherichia coli and fragments of SCP2* for replication in Streptomyces griseofuscus C581 and strains of Streptomyces lividans. The aph gene for neomycin resistance from Streptomyces fradiae and the tsr gene for thiostrepton resistance from Streptomyces azureus were incorporated as selectable antibiotic resistance markers in streptomycetes. An 11.8-kb sequence bounded by EcoRI and KpnI restriction sites contains the information for self-transfer and normal replication of the plasmid. A 5.9-kb EcoRI-SalI fragment contains all of the information for normal replication. Partial digestion generated a 2.2-kb Sau3A fragment that is sufficient for replication but it produces ten times higher plasmid copy number than the basic replicon. pHJL400 and PHJL401 are useful shuttle vectors containing the moderate-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19. A 1.4-kb BclI-Sau3A fragment with an additional internal BclI site contains the minimal replicon but it produces 1000 times higher plasmid copy number than the basic replicon. pHJL302 is a useful shuttle vector containing the ultrahigh-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19.     

Characterization of the stable maintenance properties of the par region of broad-host-range plasmid RK2.

A 3.2-kb fragment encoding five genes, parCBA/DE, in two divergently transcribed operons promotes stable maintenance of the replicon of the broad-host-range plasmid RK2 in a vector-independent manner in Escherichia coli. The parDE operon has been shown to contribute to stabilization through the postsegregational killing of plasmid-free daughter cells, while the parCBA operon encodes a resolvase, ParA, that mediates the resolution of plasmid multimers through site-specific recombination. To date, evidence indicates that multimer resolution alone does not play a significant role in RK2 stable maintenance by the parCBA operon in E. coli. It has been proposed, instead, that the parCBA region encodes an additional stability mechanism, a partition system, that ensures that each daughter cell receives a plasmid copy at cell division. However, studies carried out to date have not directly determined the plasmid stabilization activity of the parCBA operon alone. An assessment was made of the relative contributions of postsegregational killing (parDE) and the putative partitioning system (parCBA) to the stabilization of mini-RK2 replicons in E. coli. Mini-RK2 replicons carrying either the entire 3.2-kb (parCBA/DE) fragment or the 2.3-kb parCBA region alone were found to be stably maintained in two E. coli strains tested. The stabilization found is not due to resolution of multimers. The stabilizing effectiveness of parCBA was substantially reduced when the plasmid copy number was lowered, as in the case of E. coli cells carrying a temperature-sensitive mini-RK2 replicon grown at a nonpermissive temperature. The presence of the entire 3.2-kb region effectively stabilized the replicon, however, under both low- and high-copy-number-conditions. In those instances of decreased plasmid copy number, the postsegregational killing activity, encoded by parDE, either as part of the 3.2-kb fragment or alone played the major role in the stabilization of mini-RK2 replicons within the growing bacterial population. Our findings indicate that the parCBA operon functions to stabilize by a mechanism other than cell killing and resolution of plasmid multimers, while the parDE operon functions solely to stabilize plasmids by cell killing. The relative contribution of each system to stabilization depends on plasmid copy number and the particular E. coli host.     

Nucleotide sequence and characterization of the trbABC region of the IncI1 Plasmid R64: existence of the pnd gene for plasmid maintenance within the transfer region.

A 6.72-kb DNA sequence between the exc gene and the oriT operon within the transfer region of IncI1 plasmid R64 was sequenced and characterized. Three novel transfer genes, trbA, trbB, and trbC, were found in this region, along with the pnd gene responsible for plasmid maintenance. The trbABC genes appear to be organized into an operon located adjacent to the oriT operon in the opposite orientation. The trbA and trbC genes were shown to be indispensable for R64 plasmid transfer, while residual transfer activity was detected in the case of R64 derivatives carrying the trbB++ deletion mutation. The T7 RNA polymerase-promoter system revealed that the trbB gene produced a 43-kDa protein and the trbC gene produced an 85-kDa protein. The nucleotide sequence of the pnd gene is nearly identical to that of plasmid R483, indicating a function in plasmid maintenance. The plasmid stability test indicated that the mini-R64 derivatives with the pnd gene are more stably maintained in Escherichia coli cells under nonselective conditions than the mini-R64 derivatives without the pnd gene. It was also shown that the R64 transfer system itself is involved in plasmid stability to a certain degree. Deletion of the pnd gene from the tra+ mini-R64 derivative did not affect transfer frequency. DNA segments between the exc and trbA genes for IncI1 plasmids R64, Colb-P9, and R144 were compared in terms of their physical and genetic organization.     

Characterization of a mini-F plasmid derived from an F mutant expressing incompatibility in the autonomous but not in the integrated state

Plasmid DNA from Escherichia coli F' ser/MA219 harboring an altered F' factor, which expressed incompatibility in the autonomous but not in the integrated state (DeVries and Maas, 1973, J. Bacteriol. 115, 213-220), was digested with the restriction endonuclease EcoRI and ligated to a nonreplicating trpED fragment. A miniplasmid was obtained containing a 5.7-kb EcoRI fragment capable of self-replication. This plasmid, designated pRE300, was incompatible with mini-F as well as with ColE1 derivatives. It represents a cointegrate formed in vivo between a 2.2-kb segment of the F replication region and a ColE1-type replicon of unknown derivation. The F-derived component of pRE300 corresponds to a minimalized F replicon (43.85-46.05 kb F) retaining oriII and the incB locus but missing the incC and incD functions. It is postulated that the Inc- mutation resulted from the insertion of a transposable DNA sequence into the incC locus of the parent F plasmid.     

Plasmid maintenance functions of the large virulence plasmid of Shigella flexneri.

The large virulence plasmid pMYSH6000 of Shigella flexneri contains a replicon and a plasmid maintenance stability determinant (Stb) on adjacent SalI fragments. The presence of a RepFIIA replicon on the SalI C fragment was confirmed, and the complete sequence of the adjacent SalI O fragment was determined. It shows homology to part of the transfer (tra) operon of the F plasmid. Stb stabilizes a partition-defective P1 miniplasmid in Escherichia coli. A 1.1-kb region containing a homolog of the F trbH gene was sufficient to confer stability. However, the trbH open reading frame could be interrupted without impairing stability. Deletion analysis implicated the involvement of two small open reading frames, STBORF1 and STBORF2, that fully overlap trbH in the opposite direction. These open reading frames are closely related to the vagC and vagD genes of the Salmonella dublin virulence plasmid and to open reading frame pairs in the F trbH region and in the chromosomes of Dichelobacter nodosus and Haemophilus influenzae. Stb appears to promote better-than-random distribution of plasmid copies and is a plasmid incompatibility determinant. The F homolog does not itself confer stability but exerts incompatibility against the activity of the Stb system. Stb is likely to encode either an active partition system or a postsegregational killing system. It shows little similarity to previously studied plasmid stability loci, but the genetic organization of STBORF1 and STBORF2 resembles that of postsegregational killing mechanisms.     

Nucleotide sequence of the replication region of plasmid R401 and its incompatibility function

The plasmids R401 and Rtsl belong to the same incompatibility group, IncT. The nucleotide sequence of the basic replicon of R401 consisting of 1,857 base pairs was determined and compared with that of mini-Rtsl previously reported. The mini-R401 was found to be composed of two clusters of direct repeated sequences flanking a large open reading frame that could encode a 33,000 Mr protein (RepA protein) consisting of 288 amino acids. This structure of mini-R401 is quite similar to that of mini-Rtsl. Furthermore, the nucleotide sequence of mini-R401 is identical to that of mini-Rtsl except for eleven nucleotides; three are located near the carboxyl terminus portion of the RepA coding region (repA) and four are in the repeated sequences (incI) located downstream from repA. Incompatibility study showed that mini-R401 plasmid coexisted stably with the cloned incI repeats of mini-Rtsl, suggesting that mini-R401 RepA protein binds to incI repeats of mini-Rtsl less efficiently than does mini-Rtsl RepA protein.