Investigation of polymer and nanoparticle properties with nicotinic acid and p-aminobenzoic acid grafted on poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) via click chemistry

In this study, the grafting of nicotinic acid and p-aminobenzoic acid (PABA) onto poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) was performed by Huisgen's 1,3-dipolar cycloaddition, also known as click chemistry. Concentrations used for grafting were 0.10, 0.20, and 0.30 molar ratios with respect to caproyl units. The grafted copolymers were successfully obtained at all ratios as confirmed by NMR, GPC, and FT-IR. According to the DSC results, the polymorphisms of these grafted copolymers were mostly changed from semicrystalline to amorphous depending on the type and the amount of grafting compounds. TGA thermograms showed different thermal stabilities of the grafted copolymers compared to the original copolymers. Cytotoxicity results from HUVEC models suggested that the toxicity of grafted nanoparticles increased with the molar ratios of grafting units. Due to differences in molecular structure between nicotinic acid and PABA, physicochemical properties (particle size and surface charge) of grafted copolymer nanoparticles were substantially different. With increasing molar ratio of the grafting units, the particle size of blank nanoparticles tended to increase, resulting from an increase in the hydrophobic fragments of the grafted copolymer. Ibuprofen was chosen as a model drug to evaluate the interaction between grafted copolymers and loaded drug. After ibuprofen loading, the particle size of the loaded nanoparticles of both grafted copolymers increased compared to that of the blank nanoparticles. Significant differences in loading capacity between nicotinic acid and PABA grafted copolymer nanoparticles were clearly shown. This is most likely a result of different compatibility between each grafting compound and ibuprofen, including hydrogen bond interaction, π-π stacking interaction, and steric hindrance.     

A nanoparticle-based model delivery system to guide the rational design of gene delivery to the liver. 1. Synthesis and characterization

Nonviral gene delivery systems are amenable to forming colloidal particles with a wide range of physicochemical properties that include size, surface charge, and density and type of ligand presented. However, it is not known how to best design these particles without having a set of physicochemical design constraints that have been optimized for the intended gene delivery application. Here, a nanoparticle-based model delivery system is developed that can mimic the surface properties of nonviral gene delivery particles, and this model system is used to define design constraints that should be applied to next generation gene delivery particles. As a test case, a well-defined nanoparticle-based system is developed to guide the rational design of gene delivery to hepatocytes in the liver. The synthetic scheme utilizes monodisperse polystyrene particles and provides for variation of mean particle size and particle size distribution through variation in reaction conditions. The nanoparticles are PEGylated to provide stability in serum and also incorporate targeting ligands, e.g., galactose, at tunable densities. Four nanoparticles are synthesized from uniformly sized polystyrene beads specifically for the purpose of identifying design constraints to guide next generation gene delivery to the liver. These four nanoparticles are Gal-50 and Gal-140, that are galactosylated 50 and 140 nm nanoparticles, and MeO-50 and MeO-140, that are methoxy-terminated 50 and 140 nm nanoparticles. All four particles have the same surface charge, and Gal-50 and Gal-140 have the same surface galactose density. The availability of galactose ligands to receptor binding is demonstrated here by agglutination with RCA120.     

Synthesis and characterization of cysteine functionalized silver nanoparticles for biomolecule immobilization

A facile method for the aqueous phase synthesis of cysteine-functionalized silver nanoparticles by potato extract has been reported in the present work. These functionalized nanoparticles were then used for the covalent immobilization of a biomolecule, alkaline phosphatase, on its surface through carbodiimide coupling. Different reaction parameters such as cysteine concentration, reducing agent concentration, temperature, pH and reaction time were varied during the nanoparticles’ formation, and their effects on plasmon resonance were studied using Ultraviolet–visible spectroscopy. Fourier transform infrared spectroscopy was used to confirm the surface modification of silver nanoparticles by cysteine and the particle size analysis was done using particle size analyzer, which showed the average nanoparticles’ size of 61 nm for bare silver nanoparticles and 201 nm for the enzyme-immobilized nanoparticles. The synthesized nanoparticles were found to be highly efficient for the covalent immobilization of alkaline phosphatase on its surface and retained 67 % of its initial enzyme activity (9.44 U/mg), with 75 % binding efficiency. The shelf life of the enzyme-nanoparticle bioconjugates was found to be 60 days, with a 12 % loss in the initial enzyme activity. With a simple synthesis strategy, high immobilization efficiency and enhanced stability, these enzyme-coated nanoparticles have the potential for further integration into the biosensor technology.     

In vitro investigation on poly(lactide)-Tween 80 copolymer nanoparticles fabricated by dialysis method for chemotherapy

Polysorbate 80 (Tween 80) has been widely used as an emulsifier with excellent effects in nanoparticles technology for biomedical applications. This work was thus triggered to synthesize poly(lactide)/Tween 80 copolymers with various copolymer blend ratio, which were synthesized by ring-opening polymerization and characterized by 1H NMR and TGA. Nanoparticles of poly(lactide)/Tween 80 copolymers were prepared by the dialysis method without surfactants/emulsifiers involved. Paclitaxel was chosen as a prototype anticancer drug due to its excellent therapeutic effects against a wide spectrum of cancers. The drug-loaded nanoparticles of poly(lactide)/Tween 80 copolymers were then characterized by various state-of-the-art techniques, including laser light scattering for particles size and size distribution, field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) for surface morphology; laser Doppler anemometry for zeta potential; differential scanning calorimetry (DSC) for the physical status of the drug encapsulated in the polymeric matrix; X-ray photoelectron spectrometer (XPS) for surface chemistry; high performance liquid chromatography (HPLC) for drug encapsulation efficiency; and in vitro drug release kinetics. HT-29 cells and Glioma C6 cells were used as an in vitro model of the GI barrier for oral chemotherapy and a brain cancer model to evaluate in vitro cytotoxicity of the paclitaxel-loaded nanoparticles. The viability of C6 cells was decreased from 37.4 +/- 4.0% for poly(D,L-lactide-co-glycolic acid) (PLGA) nanoparticles to 17.8 +/- 4.2% for PLA-Tween 80-10 and 12.0 +/- 5.4% for PLA-Tween 80-20 copolymer nanoparticles, which was comparable with that for Taxol at the same 50 microg/mL drug concentration.     

Surface immobilization of galactose onto aliphatic biodegradable polymers for hepatocyte culture

A novel surface modification method of biodegradable polymers was investigated for inducing the attachment of specific cells onto the polymer surface via ligand-receptor interactions. Galactose, a targeting ligand specific to asialoglycoprotein receptors present on cell membrane of hepatocytes, was introduced on the surface of poly(D,L-lactic-co-glycolic acid) (PLGA) films. A terminal end group of carboxylic acid in PLGA was activated by dicyclohexylcarbodiimide and N-hydroxysuccinimide for the direct conjugation of lactose by reductive amination reaction. Di-block copolymers of PLGA-b-poly(ethylene glycol) (PEG) having a free terminal amine group were also synthesized and used for the conjugation of galactose for the introduction of a PEG spacer between PLGA and galactose. The presence of galactose moieties on the blend film surface was characterized by measuring water contact angle and X-ray photon spectroscopy, and the amount of galactose was indirectly determined by a specific lectin-binding assay. With increasing the galactose concentration on the blend film surface, the initial attachment as well as the cell viability of hepatocyates concomitantly increased. The introduction of PEG spacer reduced the cell attachment and viability. Albumin secretion rate from hepatocytes was enhanced for galactose modified surfaces, whereas it was reduced for the surfaces not having galactose moieties.     

Enhanced stability of core-surface cross-linked micelles fabricated from amphiphilic brush copolymers

"Stealth" nanoparticles made from polymer micelles have been widely explored as drug carriers for targeted drug delivery. High stability (i.e., low critical micelle concentration (CMC)) is required for their intravenous applications. Herein, we present a "core-surface cross-linking" concept to greatly enhance nanoparticle's stability: amphiphilic brush copolymers form core-surface cross-linked micelles (nanoparticles) (SCNs). The amphiphilic brush copolymers consisted of hydrophobic poly(epsilon-caprolactone) (PCL) and hydrophilic poly(ethylene glycol) (PEG) or poly(2-(N,N-dimethylamino)ethyl methacrylate) (PDMA) chains were synthesized by macromonomer copolymerization method and used to demonstrate this concept. The resulting SCNs were about 100 times more stable than micelles from corresponding amphiphilic block copolymers. The size and surface properties of the SCNs could be easily tailored by the copolymer's compositions.     

Size control of silica nanoparticles and their surface treatment for fabrication of dental nanocomposites

Nearly monodispersed silica nanoparticles having a controlled size from 5 to 450 nm were synthesized via a sol-gel process, and then the optimum conditions for the surface treatment of the synthesized silica nanoparticles with a silane coupling agent (i.e., 3-methacryloxypropyltrimethoxysilane (gamma-MPS)) were explored to produce dental composites exhibiting enhanced adhesion and dispersion of silica nanoparticles in the resin matrix. The particle size was increased by increasing amounts of the catalyst (NH4OH) and silica precursor (tetraethylorthosilicate, TEOS) and by decreasing the amount of water in the reaction mixtures regardless of solvents used for the synthesis. The particle size prepared by using ethanol as a solvent was significantly larger than that prepared by using methanol as a solvent when the composition of the reaction mixture was fixed. The nanosized particles in the 5-25 nm range were aggregated. The amount of grafted gamma-MPS on the surface of the synthesized silica nanoparticles was dependent on the composition of the reaction mixture when an excess amount of gamma-MPS was used. When surface treatment was performed at optimum conditions found here, the amount of the grafted gamma-MPS per unit surface area of the silica nanoparticles was nearly the same regardless of the particle size. Dispersion of the silica particles in the resin matrix and interfacial adhesion between silica particles and resin matrix were enhanced when surface treated silica nanoparticles were used for preparing dental nanocomposites.     

膜材与制备过程对血红蛋白微胶囊粒径和包埋率的影响

以单甲氧基聚乙二醇聚乳酸共聚物（PELA）为膜材用复乳溶剂扩散法制备了包含牛血红蛋白（BHb）的微胶囊,微胶囊中BHb的P₅₀和Hill系数分别为3 466 Pa和2.4左右,接近于天然BHb的生物活性。研究发现膜材种类对BHb微胶囊包埋率和粒径的影响最大,使用MPEG2000为亲水性嵌段的PELA共聚物时,包埋率最高,达到90％以上,粒径为3～5 μm左右;随着膜材浓度的增大,微胶囊包埋率和粒径均增加;随着外水相NaCl浓度的增大,微胶囊包埋率升高、粒径减小;随着外水相稳定剂PVA浓度的增大,微胶囊粒径减小,包埋率先升高后降低,在较低浓度下（10 g/L、20 g/L）包埋率较高;初乳化搅拌速率的增大,有利于包埋率的提高,但对粒径影响不大;复乳化搅拌速率的影响较复杂,当复乳液体积较大时,复乳化搅拌速率对微胶囊制备的影响规律性不明显。当固定膜材和初乳化搅拌速率时,包埋率和粒径之间存在着类似抛物线的关系,包埋率随着粒径的减小而降低。     

Preparation and characterization of galactose-modified liposomes by a nonaqueous enzymatic reaction

In this study, NOH (NOH?=?N-octadecyl-4-[(D-galactopyranosyl)oxy]-2,3,5,6-tetrahydroxy hexanamide) was enzymatically synthesized as a targeting molecule and incorporated into liposomes to prepare a liposome surface modified with galactose. Glycyrrhetinic-acid-loaded liposome (GA-LP) and glycyrrhetinic-acid-loaded liposome surface modified with galactose (NOH-GA-LP) were prepared by the ethanol-injection method. NOH-GA-LP was characterized by morphology, particle size, zeta potential, encapsulation efficiency, release in vitro, and stability. The size of spherical particles was in the range of 179-211?nm. Spherical particles exhibit a positive electrical charge (38.7 mV) and possess high encapsulation efficiency (91.3%) and show sustained release (72% over 48 hours) in vitro. This novel approach for the liposome surface modified with galactose by enzymatic synthesis is expected to provide potential application as a drug carrier for active targeted delivery to hepatocytes.     

Ligand density effect on biorecognition by PEGylated gold nanoparticles: regulated interaction of RCA120 lectin with lactose installed to the distal end of tethered PEG strands on gold surface

PEGylated gold nanoparticles (diameter: 20 nm) possessing various functionalities of lactose ligand on the distal end of tethered PEG ranging from 0 to 65% were prepared to explore the effect of ligand density of the nanoparticles on their lectin binding property. UV-visible spectra of the aqueous solution of the nanoparticles revealed that the strong steric stabilization property of the PEG layer lends the nanoparticles high dispersion stability even under the physiological salt concentration (ionic strength, I = 0.15 M). The number of PEG strands on a single particle was determined to be 520 from thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) observation under controlled acceleration voltage revealed the thickness of the PEG layer on the nanoparticle to be approximately 7 nm. The area occupied by a single lactose molecule on the surface of PEGylated gold nanoparticles was then calculated based on TGA and SEM results and was varied in the range of 10-34 nm2 depending on the lactose functionality (65 approximately 20%). PEGylated gold nanoparticles with 40% and 65% lactose functionality showed a selective and time-dependent aggregation in phosphate buffer with the addition of Ricinus communis agglutinin (RCA120) lectin, a bivalent galactose-specific protein. The aggregates can be completely redispersed by adding an excess amount of galactose. Time-lapse monitoring of UV-visible spectra at 600-750 nm revealed that the aggregation of PEGylated gold nanoparticles was accelerated with an increase in both RCA120 concentration in the solution and the lactose density of the nanoparticles. Furthermore, the sensitivity of lectin detection could be controlled by the regulation of lactose density on the particle surface. Interestingly, there was a critical lactose density (>20%) observed to induce detectable particle aggregation, indicating that the interaction between the particles is triggered by the multimolecular bridging via lectin molecules.     

Suppression of agglomeration of ciprofloxacin-loaded human serum albumin nanoparticles

The present study is aimed at developing and exploring the use of pectin in suppression of agglomeration of ciprofloxacinloaded human serum albumin (HSA) nanoparticles. The HSA-pectin nanoparticles loaded with ciprofloxacin were prepared by the pH-coacervation method, and various physicochemical parameters such as particle size, morphology, ζ-potential, electrolyte-induced flocculation, pH-dependent ζ-potential, drug loading, in vitro drug release, and stability of nanoparticles, were evaluated. The size of the HSA-pectin nanoparticles (F3) was found to be 180 to 290 nm. The HSA nanoparticles were modified with pectin when the critical flocculation concentration of nanoparticles in Na₂SO₄ solution was increased from 0.3 M to 0.9 M. The isoelectric points of the formed nanoparticles were found to be relatively lower between pH values 3 and 6. Pectin may be used as a pharmaceutical additive for the suppression of particle agglomeration in HSA nanoparticles, and the effect may be attributed to the pectin segments present on the surface of nanoparticles. Published: March 2, 2007     

Preparation and characterization of galactose-modified liposomes by a nonaqueous enzymatic reaction

In this study, NOH (NOH?=?N-octadecyl-4-[(D-galactopyranosyl)oxy]-2,3,5,6-tetrahydroxy hexanamide) was enzymatically synthesized as a targeting molecule and incorporated into liposomes to prepare a liposome surface modified with galactose. Glycyrrhetinic-acid–loaded liposome (GA-LP) and glycyrrhetinic-acid–loaded liposome surface modified with galactose (NOH-GA-LP) were prepared by the ethanol-injection method. NOH-GA-LP was characterized by morphology, particle size, zeta potential, encapsulation efficiency, release in vitro, and stability. The size of spherical particles was in the range of 179–211?nm. Spherical particles exhibit a positive electrical charge (38.7 mV) and possess high encapsulation efficiency (91.3%) and show sustained release (72% over 48 hours) in vitro. This novel approach for the liposome surface modified with galactose by enzymatic synthesis is expected to provide potential application as a drug carrier for active targeted delivery to hepatocytes.     

Effect of Formulation Variables on Preparation of Celecoxib Loaded Polylactide-Co-Glycolide Nanoparticles

Polymer based nanoparticle formulations have been shown to increase drug bioavailability and/or reduce drug adverse effects. Nonsteroidal anti-inflammatory drugs (e.g. celecoxib) reduce prostaglandin synthesis and cause side effects such as gastrointestinal and renal complications. The aim of this study was to formulate celecoxib entrapped poly lactide-co-glycolide based nanoparticles through a solvent evaporation process using didodecyldimethylammonium bromide or poly vinyl alcohol as stabilizer. Nanoparticles were characterized for zeta potential, particle size, entrapment efficiency, and morphology. Effects of stabilizer concentration (0.1, 0.25, 0.5, and 1% w/v), drug amount (5, 10, 15, and 20 mg), and emulsifier (lecithin) on nanoparticle characterization were examined for formula optimization. The use of 0.1, 0.25, and 0.5% w/v didodecyldimethylammonium bromide resulted in a more than 5-fold increase in zeta potential and a more than 1.5-fold increase in entrapment efficiency with a reduction in particle size over 35%, when compared to stabilizer free formulation. Nanoparticle formulations were also highly influenced by emulsifier and drug amount. Using 0.25% w/v didodecyldimethylammonium bromide NP formulations, peak zeta potential was achieved using 15 mg celecoxib with emulsifier (17.15±0.36 mV) and 20 mg celecoxib without emulsifier (25.00±0.18 mV). Peak NP size reduction and entrapment efficiency was achieved using 5 mg celecoxib formulations with (70.87±1.24 nm and 95.55±0.66%, respectively) and without (92.97±0.51 nm and 95.93±0.27%, respectively) emulsifier. In conclusion, formulations using 5 mg celecoxib with 0.25% w/v didodecyldimethylammonium bromide concentrations produced nanoparticles exhibiting enhanced size reduction and entrapment efficiency. Furthermore, emulsifier free formulations demonstrated improved zeta potential when compared to formulations containing emulsifier (p<0.01). Therefore, our results suggest the use of emulsifier free 5 mg celecoxib drug formulations containing 0.25% w/v didodecyldimethylammonium bromide for production of polymeric NPs that demonstrate enhanced zeta potential, small particle size, and high entrapment efficiency.     

Colloidal Au replacement assay for highly sensitive quantification of low molecular weight analytes by surface plasmon resonance

A novel sensing method based on surface plasmon resonance (SPR) was developed for the highly sensitive quantification of low molecular weight (LMW) analytes (colloidal Au replacement assay). Gold nanoparticles (diameter = 20 nm) functionalized with lactosyl-poly(ethylene glycol) (PEG) were prepared and were specifically adsorbed onto a Ricinus communis agglutinin (RCA120)-immobilized SPR sensor chip surface. Subsequent injection of free d-galactose elicited the elution of the preadsorbed lactosyl-PEGylated gold nanoparticles in a manner proportional to the galactose concentration, achieving a substantial and quantitative analysis over a wide range of galactose concentrations (0.1-50 ppm). This method of d-galactose sensing through the substituted elution of preadsorbed nanoparticles from the sensor chip surface would be applicable for the highly sensitive SPR quantification of various LMW analytes, which are known to be difficult to detect by the conventional SPR sensing regime.     

Efficient manipulation of nanoparticle-bound DNA via restriction endonuclease

As a programmable biopolymer, DNA has shown great potential in the fabrication and construction of nanometer-scale assemblies and devices. In this report, we described a strategy for efficient manipulation of gold nanoparticle-bound DNA using restriction endonuclease. The digestion efficiency of this restriction enzyme was studied by varying the surface coverage of stabilizer, the size of nanoparticles, as well as the distance between the nanoparticle surface and the enzyme-cutting site of particle-bound DNA. We found that the surface coverage of stabilizer is crucial for achieving high digestion efficiency. In addition, this stabilizer surface coverage can be tailored by varying the ion strength of the system. Based on the results of polyacrylamide gel electrophoresis and fluorescent study, a high digestion efficiency of 90+% for particle-bound DNA was achieved for the first time. This restriction enzyme manipulation can be considered as an additional level of control of the particle-bound DNA and is expected to be applied to manipulate more complicated nanostructures assembled by DNA.     

Cellular uptake of Poly-(D,L-lactide-co-glycolide) (PLGA) nanoparticles synthesized through solvent emulsion evaporation and nanoprecipitation method

Poly-(D,L-lactide-co-glycolide) (PLGA) nanoparticles have been widely studied for drug delivery. The aim of this study is to determine how cellular uptake of these nanoparticles is influenced by different surface properties, incubation time, particle concentration and cell types. Spherical coumarin-6 loaded PLGA nanoparticles with a size of about 100 nm were synthesized through solvent emulsion evaporation and nanoprecipitation methods. In vitro cellular uptake efficiency was determined using human bronchial epithelial cells (BEAS-2B) and murine monocyte-derived macrophage (RAW264.7) cells. PLGA nanoparticles were incubated with these cells in a concentration range of 10-300 μg/ml for different time periods. The results show that cellular uptake decreased for nanoparticles surface coated with PVA surfactant and was especially limited for severely aggregated particles. At higher particle concentration, the total amount of particles taken up by cells increased while the uptake efficiency decreased. In addition, cells could take up more particles with longer incubation time, although the uptake rate decreased gradually with time. Finally, RAW264.7 cells show increased uptake compared to BEAS-2B cells. The information drawn from this study would provide important clues on how nanomaterials interact with cells and how these interactions can influence biocompatibility or toxicity.     

Influence of Formulation Factors on the Preparation of Zein Nanoparticles

The main objective of the present study was to investigate the influence of various formulation parameters on the preparation of zein nanoparticles. 6,7-dihydroxycoumarin (DHC) was used as a model hydrophobic compound. The influence of pH of the aqueous phase, buffer type, ionic strength, surfactant, and zein concentration on particle size, polydispersity index, and zeta potential of DHC-loaded zein nanoparticles were studied. Smaller nanoparticles were formed when the pH was close to the isoelectric point of zein. DHC-loaded zein nanoparticles prepared using citrate buffer (pH 7.4) was better than phosphate buffer in preventing particle aggregation during lyophilization. The ionic strength did not have a significant influence on the particle size of DHC-loaded zein nanoparticles. A combination of Pluronic F68 and lecithin in 2:1 ratio stabilized the zein nanoparticles. An increase in zein concentration led to increase in particle size of DHC-loaded zein nanoparticles. The use of optimal conditions produced DHC-loaded nanoparticles of 256 ± 30 nm and an encapsulation efficiency of 78 ± 7%. Overall, the study demonstrated the optimal conditions to prepare zein nanoparticles for drug encapsulation.KEY WORDS: drug delivery, particle size distribution, pH nanoprecipitation, protein polymers, zein, zeta potential     

Acceleration of antibacterial activity of curcumin loaded biopolymers against methicillin‐resistant Staphylococcus aureus: Synthesis,optimization, and evaluation

Curcumin is a polyphenolic molecule with antibacterial, antioxidant, anti‐inflammatory, and antimicrobial properties. This study aimed to prepare nanocurcumin by encapsulating in biopolymers to improve its stability, bioavailability, water‐solubility, antibacterial efficiency against methicillin‐resistant Staphylococcus aureus. Three effective variables of curcumin concentration, polymer concentration, and water volume on curcumin‐loaded polymer nanoparticles, were optimized. The average size of polyacrylic acid (PAA), polyvinyl alcohol (PVA), and polyethyleneimine (PEI) nanoparticles were obtained 75.2, 77.1, 86.4 nm, respectively. The nanoparticles had a spherical shape, a smooth and uniform surface morphology. The MIC of PAA, PVA, and PEI nanoparticles was 0.480, 0.390, and 0.340 mg/mL, respectively and the MIC of PAA, PVA, and PEI combined with methicillin was 0.330, 0.260, and 0.200 mg/mL, respectively. According to the results, curcumin‐loaded PEI nanoparticles had the highest inhibitory effect against methicillin‐resistant S. aureus among the synthesized nanoparticles. The results showed that solvent volume, polymer concentration and curcumin concentration had a significant effect on particle size. The inhibitory properties of curcumin nanoparticles significantly increased due to the smaller particle size and increased penetration into the bacterium. Curcumin‐loaded nanoparticles can be promising drug carriers for the treatment of infections, cancer, and other diseases.     

Emulsifying properties of biodegradable polylactide-grafted dextran copolymers

Amphiphilic glycopolymers, polylactide-grafted dextran copolymers (Dex-g-PLA), were synthesized with a well-controlled architecture obtained through a three-step procedure: partial silylation of the dextran hydroxyl groups, ring-opening polymerization of D,L-lactide initiated from remaining hydroxyl groups, silylether deprotection under very mild conditions. Depending on their proportion in polylactide (PLA), these copolymers exhibited solubility either in water or in organic solvents. The emulsifying properties of these glycopolymers were studied: depending on their PLA-to-dextran ratio, they were able to stabilize either direct or inverse emulsions. Droplet size was related to the amount of amphiphilic copolymer in the continuous phase. The aging mechanism of both direct and inverse emulsions was shown to be Ostwald ripening in the first weeks following preparation. Finally inverse miniemulsion copolymerization of acrylamide and N, N'-methylenebisacrylamide was performed in the presence of an amphiphilic Dex-g-PLA stabilizer. Polyacrylamide hydrogel nanoparticles were prepared in that way.     

Physical-Chemical Characterization and Formulation Considerations for Solid Lipid Nanoparticles

Pure glyceryl mono-oleate (GMO) (lipid) and different batches of GMO commonly used for the preparation of GMO-chitosan nanoparticles were characterized by modulated differential scanning calorimetry (MDSC), cryo-microscopy, and cryo-X-ray powder diffraction techniques. GMO-chitosan nanoparticles containing poloxamer 407 as a stabilizer in the absence and presence of polymers as crystallization inhibitors were prepared by ultrasonication. The effect of polymers (polyvinyl pyrrolidone (PVP), Eudragits, hydroxyl propyl methyl cellulose (HPMC), polyethylene glycol (PEG)), surfactants (poloxamer), and oils (mineral oil and olive oil) on the crystallization of GMO was investigated. GMO showed an exothermic peak at around ?10°C while cooling and another exothermic peak at around ?12°C while heating. It was followed by two endothermic peaks between 15 and 30 C, indicative of GMO melting. The results are corroborated by cryo-microscopy and cryo-X-ray. Significant differences in exothermic and endothermic transition were observed between different grades of GMO and pure GMO. GMO-chitosan nanoparticles resulted in a significant increase in particle size after lyophilization. MDSC confirmed that nanoparticles showed similar exothermic crystallization behavior of lipid GMO. MDSC experiments showed that PVP inhibits GMO crystallization and addition of PVP showed no significant increase in particle size of solid lipid nanoparticle (SLN) during lyophilization. The research highlights the importance of extensive physical-chemical characterization for successful formulation of SLN.