Localized DNA melting and structural pertubations in the origin of replication, oriC, of Escherichia coli in vitro and in vivo.

The leftmost region of the Escherichia coli origin of DNA replication (oriC) contains three tandemly repeated AT-rich 13mers which have been shown to become single-stranded during the early stages of initiation in vitro. Melting is induced by the ATP form of DnaA, the initiator protein of DNA replication. KMnO4 was used to probe for single-stranded regions and altered DNA conformation during the initiation of DNA replication at oriC in vitro and in vivo. Unpairing in the AT-rich 13mer region is thermodynamically stable even in the absence of DnaA protein, but only when divalent cations are omitted from the reaction. In the presence of Mg2+, oriC melting is strictly DnaA dependent. The sensitive region is distinct from that detected in the absence of DnaA as it is located further to the left within the minimal origin. In addition, the DNA is severely distorted between the three 13mers and the IHF binding site in oriC. A change of conformation can also be observed during the initiation of DNA replication in vivo. This is the first in vivo evidence for a structural change at the 13mers during initiation complex formation.     

Positioning and the specific sequence of each 13-mer motif are critical for activity of the plasmid RK2 replication origin

The minimal replication origin of the broad-host-range plasmid RK2, oriV, contains five iterons which are binding sites for the plasmid-encoded replication initiation protein TrfA, four DnaA boxes, which bind the host DnaA protein, and an AT-rich region containing four 13-mer sequences. In this study, 26 mutants with altered sequence and/or spacing of 13-mer motifs have been constructed and analysed for replication activity in vivo and in vitro. The data show that the replacement of oriV 13-mers by similar but not identical 13-mer sequences from Escherichia coli oriC inactivates the origin. In addition, interchanging the positions of the oriV 13-mers results in greatly reduced activity. Mutants with T/A substitutions are also inactive. Furthermore, introduction of single-nucleotide substitutions demonstrates very restricted sequence requirements depending on the 13-mer position. Only two of the mutants are host specific, functional in Pseudomonas aeruginosa but not in E. coli. Our experiments demonstrate considerable complexity in the plasmid AT-rich region architecture required for functionality. It is evident that low internal stability of this region is not the only feature contributing to origin activity. Our studies suggest a requirement for sequence-specific protein interactions within the 13-mers during assembly of replication complexes at the plasmid origin.     

The structure of the initiation complex at the replication origin, oriC, of Escherichia coli.

Two distinct regions in the replication origin, oriC, of Escherichia coli are separately distorted upon initiation complex formation by the initiator protein DnaA. The AT-rich region in the left part of oriC and the start site region in the right part of oriC. Chemical modification of single-stranded DNA was observed at both regions whereas endonuclease recognition of DNA mini-bulges specifically occurred in the start site region. We show that the helical phasing of binding sites for DnaA protein in oriC is important for origin function. An insertion or deletion of one helical turn between the two rightmost binding sites does not alter the efficiency of replication initiation, whereas all modifications of distance by less or more than one helical turn result in inactivation of oriC. DnaA binding and helical distortions in the AT-rich region as well as in the start site region are not affected in the distance mutants irrespective of their functionality in vivo. We propose a specific compact nucleoprotein structure for the initiation complex.     

The structure of bacterial DnaA: implications for general mechanisms underlying DNA replication initiation

The initiation of DNA replication is a key event in the cell cycle of all organisms. In bacteria, replication initiation occurs at specific origin sequences that are recognized and processed by an oligomeric complex of the initiator protein DnaA. We have determined the structure of the conserved core of the Aquifex aeolicus DnaA protein to 2.7 A resolution. The protein comprises an AAA+ nucleotide-binding fold linked through a long, helical connector to an all-helical DNA-binding domain. The structure serves as a template for understanding the physical consequences of a variety of DnaA mutations, and conserved motifs in the protein suggest how two critical aspects of origin processing, DNA binding and homo-oligomerization, are mediated. The spatial arrangement of these motifs in DnaA is similar to that of the eukaryotic-like archaeal replication initiation factor Cdc6/Orc1, demonstrating that mechanistic elements of origin processing may be conserved across bacterial, archaeal and eukaryotic domains of life.     

Multiple conformational states of DnaA protein regulate its interaction with DnaA boxes in the initiation of DNA replication

DnaA protein is the initiator of genomic DNA replication in prokaryotes. It binds to specific DNA sequences in the origin of DNA replication and unwinds small AT-rich sequences downstream for the assembly of the replisome. The mechanism of activation of DnaA that enables it to bind and organize the origin DNA and leads to replication initiation remains unclear. In this study, we have developed double-labeled fluorescent DnaA probes to analyze conformational states of DnaA protein upon binding DNA, nucleotide, and Soj sporulation protein using Fluorescence Resonance Energy Transfer (FRET). Our studies demonstrate that DnaA protein undergoes large conformational changes upon binding to substrates and there are multiple distinct conformational states that enable it to initiate DNA replication. DnaA protein adopted a relaxed conformation by expanding ~ 15 Å upon binding ATP and DNA to form the ATP·DnaA·DNA complex. Hydrolysis of bound ATP to ADP led to a contraction of DnaA within the complex. The relaxed conformation of DnaA is likely required for the formation of the multi-protein ATP·DnaA·DNA complex. In the initiation of sporulation, Soj binding to DnaA prevented relaxation of its conformation. Soj·ADP appeared to block the activation of DnaA, suggesting a mechanism for Soj·ADP in switching initiation of DNA replication to sporulation. Our studies demonstrate that multiple conformational states of DnaA protein regulate its binding to DNA in the initiation of DNA replication.     

Bending of the origin of replication of E. coli by binding of IHF at a specific site

In studies of DNA replication in Escherichia coli, an important question concerns the role of the initiator protein DnaA. This protein is known to bind to a specific 9-bp sequence in the origin of replication, but it is not understood how it can recognize another, relatively distant, 13-bp sequence that has no homology to the binding site but is where the DnaA protein serves its catalytic function in the initiation of DNA replication. This effect of DnaA might be achieved by bending of DNA in this region. I have searched for putative binding sites for integration host factor (IHF), a protein known to bend DNA. Here I report the finding of an IHF binding site in the E. coli origin and present direct evidence that IHF binds and causes DNA bending in this region. On the basis of these results I propose a model wherein formation of a higher-order nucleoprotein structure would facilitate the action of DnaA protein in the initiation events.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication.     

Identification of the chromosomal replication origin from Thermus thermophilus and its interaction with the replication initiator DnaA

The chromosomal replication origin oriC and the gene encoding the replication initiator protein DnaA from Thermus thermophilus have been identified and cloned into an Escherichia coli vector system. The replication origin is composed of 13 characteristically arranged DnaA boxes, binding sites for the DnaA protein, and an AT-rich stretch, followed by the dnaN gene. The dnaA gene is located upstream of the origin and expresses a typical DnaA protein that follows the division into four domains, as with other members of the DnaA protein family. Here, we report the purification of Thermus-DnaA (Tth-DnaA) and characterize the interaction of the purified protein with the replication origin, with regard to the binding kinetics and stoichiometry of this interaction. Using gel retardation assays, surface plasmon resonance (SPR) and electron microscopy, we show that, unlike the E. coli DnaA, Tth-DnaA does not recognize a single DnaA box, instead a cluster of three tandemly repeated DnaA boxes is the minimal requirement for specific binding. The highest binding affinities are observed with full-length oriC or six clustered, tandemly repeated DnaA boxes. Furthermore, high-affinity DNA-binding of Tth-DnaA is dependent on the presence of ATP. The Thermus DnaA/oriC interaction will be compared with oriC complex formation generated by other DnaA proteins.     

Sequence-specific interactions of Rep proteins with ssDNA in the AT-rich region of the plasmid replication origin

The DNA unwinding element (DUE) is a sequence rich in adenine and thymine residues present within the origin region of both prokaryotic and eukaryotic replicons. Recently, it has been shown that this is the site where bacterial DnaA proteins, the chromosomal replication initiators, form a specific nucleoprotein filament. DnaA proteins contain a DNA binding domain (DBD) and belong to the family of origin binding proteins (OBPs). To date there has been no data on whether OBPs structurally different from DnaA can form nucleoprotein complexes within the DUE. In this work we demonstrate that plasmid Rep proteins, composed of two Winged Helix domains, distinct from the DBD, specifically bind to one of the strands of ssDNA within the DUE. We observed nucleoprotein complexes formed by these Rep proteins, involving both dsDNA containing the Rep-binding sites (iterons) and the strand-specific ssDNA of the DUE. Formation of these complexes required the presence of all repeated sequence elements located within the DUE. Any changes in these repeated sequences resulted in the disturbance in Rep-ssDNA DUE complex formation and the lack of origin replication activity in vivo or in vitro.     

Stoichiometry of DnaA and DnaB protein in initiation at the Escherichia coli chromosomal origin

Initiation of DNA replication at the Escherichia coli chromosomal origin, oriC, occurs through an ordered series of events that depend first on the binding of DnaA protein, the replication initiator, to DnaA box sequences within oriC followed by unwinding of an AT-rich region near the left border. The prepriming complex then forms, involving the binding of DnaB helicase at oriC so that it is properly positioned at each replication fork. We assembled and isolated the prepriming complexes on an oriC plasmid, then determined the stoichiometries of proteins in these complexes by quantitative immunoblot analysis. DnaA protein alone binds to oriC with a stoichiometry of 4-5 monomers per oriC DNA. In the prepriming complex, the stoichiometries are 10 DnaA monomers and 2 DnaB hexamers per oriC plasmid. That only two DnaB hexamers are bound, one for each replication fork, suggests that the binding of additional molecules of DnaA in forming the prepriming complex restricts the loading of additional DnaB hexamers that can bind at oriC.     

DnaA boxes in the P1 plasmid origin: the effect of their position on the directionality of replication and plasmid copy number.

The DnaA protein is essential for initiation of DNA replication in a wide variety of bacterial and plasmid replicons. The replication origin in these replicons invariably contains specific binding sites for the protein, called DnaA boxes. Plasmid P1 contains a set of DnaA boxes at each end of its origin but can function with either one of the sets. Here we report that the location of origin-opening, initiation site of replication forks and directionality of replication do not change whether the boxes are present at both or at one of the ends of the origin. Replication was bidirectional in all cases. These results imply that DnaA functions similarly from the two ends of the origin. However, origins with DnaA boxes proximal to the origin-opening location opened more efficiently and maintained plasmids at higher copy numbers. Origins with the distal set were inactive unless the adjacent P1 DNA sequences beyond the boxes were included. At either end, phasing of the boxes with respect to the remainder of the origin influenced the copy number. Thus, although the boxes can be at either end, their precise context is critical for efficient origin function.     

Mechanism of origin unwinding: sequential binding of DnaA to double- and single-stranded DNA

The initiator protein DnaA of Escherichia coli binds to a 9mer consensus sequence, the DnaA box (5'-TT(A/T)TNCACA). If complexed with ATP it adopts a new binding specificity for a 6mer consensus sequence, the ATP-DnaA box (5'-AGatct). Using DNase footprinting and surface plasmon resonance we show that binding to ATP-DnaA boxes in the AT-rich region of oriC of E.coli requires binding to the 9mer DnaA box R1. Cooperative binding of ATP-DnaA to the AT-rich region results in its unwinding. ATP-DnaA subsequently binds to the single-stranded region, thereby stabilizing it. This demonstrates an additional binding specificity of DnaA protein to single-stranded ATP-DnaA boxes. Binding affinities, as judged by the DnaA concentrations required for site protection in footprinting, were approximately 1 nM for DnaA box R1, 400 nM for double-stranded ATP-DnaA boxes and 40 nM for single-stranded ATP-DnaA boxes, respectively. We propose that sequential recognition of high- and low-affinity sites, and binding to single-stranded origin DNA may be general properties of initiator proteins in initiation complexes.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

 Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication. Received: 15 May 1996/Accepted: 11 July 1996     

Interaction of initiator proteins with the origin of replication of an IncL/M plasmid

The origin of replication of the IncL/M plasmid pMU604 was analyzed to identify sequences important for binding of initiator proteins and origin activity. A thrice repeated sequence motif 5'-NANCYGCAA-3' was identified as the binding site (RepA box) of the initiator protein, RepA. All three copies of the RepA box were required for in vivo activity and binding of RepA to these boxes appeared to be cooperative. A DnaA R box (box 1), located immediately upstream of the RepA boxes, was not required for recruitment of DnaA during initiation of replication by RepA of pMU604 unless a DnaA R box located at the distal end of the origin (box 3) had been inactivated. However, DnaA R box 1 was important for recruitment of DnaA to the origin of replication of pMU604 when the initiator RepA was that from a distantly related plasmid, pMU720. A mutation which scrambled DnaA R boxes 1 and 3 and one which scrambled DnaA R boxes 1, 3 and 4 had much more deleterious effects on initiation by RepA of pMU720 than on initiation by RepA of pMU604. Neither Rep protein could initiate replication from the origin of pMU604 in the absence of DnaA, suggesting that the difference between them might lie in the mechanism of recruitment of DnaA to this origin. DnaA protein enhanced the binding and origin unwinding activities of RepA of pMU604, but appeared unable to bind to a linear DNA fragment bearing the origin of replication of pMU604 in the absence of other proteins.     

Evidence for a chromosome origin unwinding system broadly conserved in bacteria

Genome replication is a fundamental requirement for the proliferation of all cells. Throughout the domains of life, conserved DNA replication initiation proteins assemble at specific chromosomal loci termed replication origins and direct loading of replicative helicases (1). Despite decades of study on bacterial replication, the diversity of bacterial chromosome origin architecture has confounded the search for molecular mechanisms directing the initiation process. Recently a basal system for opening a bacterial chromosome origin (oriC) was proposed (2). In the model organism Bacillus subtilis, a pair of double-stranded DNA (dsDNA) binding sites (DnaA‐boxes) guide the replication initiator DnaA onto adjacent single-stranded DNA (ssDNA) binding motifs (DnaA‐trios) where the protein assembles into an oligomer that stretches DNA to promote origin unwinding. We report here that these core elements are predicted to be present in the majority of bacterial chromosome origins. Moreover, we find that the principle activities of the origin unwinding system are conserved in vitro and in vivo. The results suggest that this basal mechanism for oriC unwinding is broadly functionally conserved and therefore may represent an ancestral system to open bacterial chromosome origins.     

The Caulobacter crescentus chromosome replication origin evolved two classes of weak DnaA binding sites

The Caulobacter crescentus replication initiator DnaA and essential response regulator CtrA compete to control chromosome replication. The C. crescentus replication origin (Cori) contains five strong CtrA binding sites but only two apparent DnaA boxes, termed G-boxes (with a conserved second position G, TGATCCACA). Since clusters of DnaA boxes typify bacterial replication origins, this discrepancy suggested that C. crescentus DnaA recognizes different DNA sequences or compensates with novel DNA-binding proteins. We searched for novel DNA sites by scanning mutagenesis of the most conserved Cori DNA. Autonomous replication assays showed that G-boxes and novel W-boxes (TCCCCA) are essential for replication. Further analyses showed that C. crescentus DnaA binds G-boxes with moderate and W-boxes with very weak affinities significantly below DnaA's capacity for high-affinity Escherichia coli-boxes (TTATCCACA). Cori has five conserved W-boxes. Increasing W-box affinities increases or decreases autonomous replication depending on their strategic positions between the G-boxes. In vitro, CtrA binding displaces DnaA from proximal G-boxes and from distal W-boxes implying CtrA-DnaA competition and DnaA-DnaA cooperation between G-boxes and W-boxes. Similarly, during cell cycle progression, CtrA proteolysis coincides with DnaA binding to Cori. We also observe highly conserved W-boxes in other replication origins lacking E. coli-boxes. Therefore, strategically weak DnaA binding can be a general means of replication control.     

Two oppositely oriented arrays of low-affinity recognition sites in oriC guide progressive binding of DnaA during Escherichia coli pre-RC assembly

The onset of chromosomal DNA replication requires highly precise and reproducible interactions between initiator proteins and replication origins to assemble a pre-replicative complex (pre-RC) that unwinds the DNA duplex. In bacteria, initiator protein DnaA, bound to specific high- and low-affinity recognition sites within the unique oriC locus, comprises the pre-RC, but how complex assembly is choreographed to ensure precise initiation timing during the cell cycle is not well understood. In this study, we present evidence that higher-order DnaA structures are formed at oriC when DnaA monomers are closely positioned on the same face of the DNA helix by interaction with two oppositely oriented essential arrays of closely spaced low-affinity DnaA binding sites. As DnaA levels increase, peripheral high-affinity anchor sites begin cooperative loading of the arrays, which is extended by sequential binding of additional DnaA monomers resulting in growth of the complexes towards the centre of oriC. We suggest that this polarized assembly of unique DnaA oligomers within oriC plays an important role in mediating pre-RC activity and may be a feature found in all bacterial replication origins.     

Cell-cycle control of a cloned chromosomal origin of replication from Caulobacter crescentus.

Caulobacter crescentus cell division is asymmetric and yields distinct swarmer cell and stalked cell progeny. Only the stalked cell initiates chromosomal replication, and the swarmer cell must differentiate into a stalked cell before chromosomal DNA replication can occur. In an effort to understand this developmental control of replication, we employed pulsed-field gel electrophoresis to localize and to isolate the chromosomal origin of replication. The C. crescentus homologues of several Escherichia coli genes are adjacent to the origin in the physical order hemE, origin, dnaA and dnaK,J. Deletion analysis reveals that the minimal sequence requirement for autonomous replication is greater than 430 base-pairs, but less than 720 base-pairs. A plasmid, whose replication relies only on DNA from the C. crescentus origin of replication, has a distinct temporal pattern of DNA synthesis that resembles that of the bona fide C. crescentus chromosome. This implies that cis-acting replication control elements are closely linked to this origin of replication. This DNA contains sequence motifs that are common to other bacterial origins, such as five DnaA boxes, an E. coli-like 13-mer, and an exceptional A + T-rich region. Point mutations in one of the DnaA boxes abolish replication in C. crescentus. This origin also possesses three additional motifs that are unique to the C. crescentus origin of replication: seven 8-mer (GGCCTTCC) motifs, nine 8-mer (AAGCCCGG) motifs, and five 9-mer (GTTAA-n7-TTAA) motifs are present. The latter two motifs are implicated in essential C. crescentus replication functions, because they are contained within specific deletions that abolish replication.     

Role of DNA methylation at GATC sites in the dnaA promoter, dnaAp2

DnaA protein is required for the initiation of DNA replication at the bacterial chromosomal origin, oriC, and at the origins of many plasmids. The concentration of DnaA protein is an important factor in determining when initiation occurs during the cell cycle. Methylation of GATC sites in the dnaAp2 promoter, two of which are in the -35 and -10 sequences, has been predicted to play an important role in regulating dnaA gene expression during the cell cycle because the promoter is sequestered from methylation immediately following replication. Mutations that eliminate these two GATC sites but do not substantially change the activity of the promoter were introduced into a reporter gene fusion and into the chromosome. The chromosomal mutants are able to initiate DNA replication synchronously at both moderately slow and fast growth rates, demonstrating that GATC methylation at these two sites is not directly involved in providing the necessary amount of DnaA for precise timing of initiation during the cell cycle. Either sequestration does not involve these GATC sites, or cell cycle control of DnaA expression is not required to supply the concentration necessary for correct timing of initiation.