Microinjection of fluorescent tubulin into dividing sea urchin cells

To follow the dynamics of microtubule (MT) assembly and disassembly during mitosis in living cells, tubulin has been covalently modified with the fluorochrome 5-(4,6-dichlorotriazin-2-yl)aminofluorescein and microinjected into fertilized eggs of the sea urchin Lytechinus variegatus. The changing distribution of the fluorescent protein probe is visualized in a fluorescence microscope coupled to an image intensification video system. Cells that have been injected with fluorescent tubulin show fluorescent linear polymers that assemble very rapidly and radiate from the spindle poles, coincident with the position of the astral fibers. No fluorescent polymer is apparent in other areas of the cytoplasm. When fluorescent tubulin is injected near the completion of anaphase, little incorporation of fluorescent tubulin into polymer is apparent, suggesting that new polymerization does not occur past a critical point in anaphase. These results demonstrate that MT polymerization is very rapid in vivo and that the assembly is both temporally and spatially regulated within the injected cells. Furthermore, the microinjected tubulin is stable within the sea urchin cytoplasm for at least 1 h since it can be reutilized in successive daughter cell spindles. Control experiments indicate that the observed fluorescence is dependent on MT assembly. The fluorescence is greatly diminished upon treatment of the cells with cold or colchicine agents known to cause the depolymerization of assembled MT. In addition, cells injected with fluorescent bovine serum albumin or assembly-incompetent fluorescent tubulin do not exhibit fluorescence localized in the spindle but rather appear diffusely fluorescent throughout the cytoplasm.     

Consequences of defective tubulin folding on heterodimer levels, mitosis and spindle morphology in Saccharomyces cerevisiae

In budding yeast, the essential roles of microtubules include segregating chromosomes and positioning the nucleus during mitosis. Defects in these functions can lead to aneuploidy and cell death. To ensure proper mitotic spindle and cytoplasmic microtubule formation, the cell must maintain appropriate stoichiometries of alpha- and beta-tubulin, the basic subunits of microtubules. The experiments described here investigate the minimal levels of tubulin heterodimers needed for mitotic function. We have found a triple-mutant strain, pac10Delta plp1Delta yap4Delta, which has only 20% of wild-type tubulin heterodimer levels due to synthesis and folding defects. The anaphase spindles in these cells are approximately 64% the length of wild-type spindles. The mutant cells are viable and accurately segregate chromosomes in mitosis, but they do have specific defects in mitosis such as abnormal nuclear positioning. The results establish that cells with 20% of wild-type levels of tubulin heterodimers can perform essential cellular functions with a short spindle, but require higher tubulin heterodimer concentrations to attain normal spindle length and prevent mitotic defects.     

Nucleocytoplasmic transport in the midzone membrane domain controls yeast mitotic spindle disassembly

During each cell cycle, the mitotic spindle is efficiently assembled to achieve chromosome segregation and then rapidly disassembled as cells enter cytokinesis. Although much has been learned about assembly, how spindles disassemble at the end of mitosis remains unclear. Here we demonstrate that nucleocytoplasmic transport at the membrane domain surrounding the mitotic spindle midzone, here named the midzone membrane domain (MMD), is essential for spindle disassembly in Schizosaccharomyces pombe cells. We show that, during anaphase B, Imp1-mediated transport of the AAA-ATPase Cdc48 protein at the MMD allows this disassembly factor to localize at the spindle midzone, thereby promoting spindle midzone dissolution. Our findings illustrate how a separate membrane compartment supports spindle disassembly in the closed mitosis of fission yeast.     

The STARD9/Kif16a kinesin associates with mitotic microtubules and regulates spindle pole assembly

During cell division, cells form the microtubule-based mitotic spindle, a highly specialized and dynamic structure that mediates proper chromosome transmission to daughter cells. Cancer cells can show perturbed mitotic spindles and an approach in cancer treatment has been to trigger cell killing by targeting microtubule dynamics or spindle assembly. To identify and characterize proteins necessary for spindle assembly, and potential antimitotic targets, we performed a proteomic and genetic analysis of 592 mitotic microtubule copurifying proteins (MMCPs). Screening for regulators that affect both mitosis and apoptosis, we report the identification and characterization of STARD9, a kinesin-3 family member, which localizes to centrosomes and stabilizes the pericentriolar material (PCM). STARD9-depleted cells have fragmented PCM, form multipolar spindles, activate the spindle assembly checkpoint (SAC), arrest in mitosis, and undergo apoptosis. Interestingly, STARD9-depletion synergizes with the chemotherapeutic agent taxol to increase mitotic death, demonstrating that STARD9 is a mitotic kinesin and a potential antimitotic target.     

Chemical genetic profiling of the microtubule-targeting agent peloruside A in budding yeast Saccharomyces cerevisiae

Peloruside A, a microtubule-stabilising agent from a New Zealand marine sponge, inhibits mammalian cell division by a similar mechanism to that of the anticancer drug paclitaxel. Wild type budding yeast Saccharomyces cerevisiae (haploid strain BY4741) showed growth sensitivity to peloruside A with an IC(50) of 35μM. Sensitivity was increased in a mad2Δ (Mitotic Arrest Deficient 2) deletion mutant (IC(50)=19μM). Mad2 is a component of the spindle-assembly checkpoint complex that delays the onset of anaphase in cells with defects in mitotic spindle assembly. Haploid mad2Δ cells were much less sensitive to paclitaxel than to peloruside A, possibly because the peloruside binding site on yeast tubulin is more similar to mammalian tubulin than the taxoid site where paclitaxel binds. In order to obtain information on the primary and secondary targets of peloruside A in yeast, a microarray analysis of yeast heterozygous and homozygous deletion mutant sets was carried out. Haploinsufficiency profiling (HIP) failed to provide hits that could be validated, but homozygous profiling (HOP) generated twelve validated genes that interact with peloruside A in cells. Five of these were particularly significant: RTS1, SAC1, MAD1, MAD2, and LSM1. In addition to its known target tubulin, based on these microarray 'hits', peloruside A was seen to interact genetically with other cell proteins involved in the cell cycle, mitosis, RNA splicing, and membrane trafficking.     

Experimental manipulation of the amount of tubulin available for assembly into the spindle of dividing sea urchin eggs

Spindle assembly is studied in the eggs of the sea urchin Lytechinus variegatus by experimentally varying the amount of polymerizable tubulin within the egg. Aliquots of fertilized eggs from the same female are individually pulsed for 1-6 min with 1 X 10(-6) M Colcemid at least 20 min before first nuclear envelope breakdown. This treatment inactivates a portion of the cellular tubulin before the spindle is formed. Upon entering mitosis, treated eggs form functional spindles that are reduced in length and birefringent retardation but not width. With increased exposure to Colcemid, the length and retardation of the metaphase spindles are progressively reduced. Similar results are obtained by pulsing the eggs with Colcemid before fertilization, which demonstrates that the tubulin found in unfertilized sea urchin eggs is later used in spindle formation. Spindles, once assembled, are responsive to increases in the amount of polymerizable tubulin within the cell. Rapid increases in the amount of polymerizable tubulin within a Colcemid-treated cell can be experimentally effected by irradiating the cells with 366-nm light. This treatment photochemically inactivates the Colcemid, thereby freeing the tubulin to polymerize. Upon irradiation, the small prometaphase spindles of Colcemid-treated cells immediately increase in length and retardation. In these irradiated cells, spindle length and retardation increase as much as four times faster than they do during prometaphase for normal spindles. This suggests that the rate of the normal prometaphase increase in retardation and spindle size may be determined by factors other than the maximum rate of tubulin polymerization in the cell.     

Drosophila mars is required for organizing kinetochore microtubules during mitosis

Spindle assembly is essential for the equal distribution of genetic material to the daughter cells during mitosis. The process of spindle assembly is complicated and involves multiple levels of molecular regulation. It is generally accepted that mitotic spindles are emanated from the centrosomes and are assembled in the vicinity of chromosomes. However, the molecular mechanism involved in the spindle assembly during mitosis remains unclear. In this study, we have provided several lines of evidence to show that Drosophila Mars is required for the assembly and stabilization of kinetochore microtubules. In an immunocytochemical study, we show that Mars is mainly localized on the kinetochore microtubules during mitosis. Using RNA interference to deplete the Mars expression in Drosophila S2 cells resulted in the malformation of mitotic spindle that mainly lacked the kinetochore microtubules. The spindle defect resulted in mitotic delays by increasing the percentage of uncongressed chromosomes both in vitro and in vivo. In summary, this study has extended our previous study of Mars in cell cycle regulation and provided further evidence showing that Mars is required for the assembly of kinetochore microtubules.     

Aberrant spindle dynamics and cytokinesis in Dictyostelium discoideum cells that lack glycogen synthase kinase 3

Eukaryotic cell division requires the co-ordinated assembly and disassembly of the mitotic spindle, accurate chromosome segregation and temporal control of cytokinesis to generate two daughter cells. While the absolute details of these processes differ between organisms, there are evolutionarily conserved core components common to all eukaryotic cells, whose identification will reveal the key processes that control cell division. Glycogen synthase kinase 3 (GSK-3) is a major protein kinase found throughout the eukaryotes and regulates many processes, including cell differentiation, growth, motility and apoptosis. In animals, GSK-3 associates with mitotic spindles and its inhibition causes mis-regulation of chromosome segregation. Two suppressor screens in yeast point to a more general effect of GSK-3 on cell division, however the direct role of GSK-3 in control of mitosis has not been explored outside the animal kingdom. Here we report that the Dictyostelium discoideum GSK-3 orthologue, GskA, associates with the mitotic spindle during cell division, as seen for its mammalian counterparts. Dictyostelium possesses only a single GSK-3 gene that can be deleted to eliminate all GSK-3 activity. We found that gskA-null mutants failed to elongate their mitotic spindle and were unable to divide in shaking culture, but have no chromosome segregation defect. These results suggest further conservation for the role of GSK-3 in the regulation of spindle dynamics during mitosis, but also reveal differences in the mechanisms ensuring accurate chromosome segregation.     

Katanin disrupts the microtubule lattice and increases polymer number in C. elegans meiosis

Katanin is a heterodimer that exhibits ATP-dependent microtubule-severing activity in vitro. In Xenopus egg extracts, katanin activity correlates with the addition of cyclin B/cdc2, suggesting a role for microtubule severing in the disassembly of long interphase microtubules as the cell prepares for mitosis. However, studies from plant cells, cultured neurons, and nematode embryos suggest that katanin could be required for the organization or postnucleation processing of microtubules, rather than the dissolution of microtubule structures. Here we reexamine katanin's role by studying acentrosomal female meiotic spindles in C. elegans embryos. In mutant embryos lacking katanin, microtubules form around meiotic chromatin but do not organize into bipolar spindles. By using electron tomography, we found that katanin converts long microtubule polymers into shorter microtubule fragments near meiotic chromatin. We further show that turning on katanin during mitosis also creates a large pool of short microtubules near the centrosome. Furthermore, the identification of katanin-dependent microtubule lattice defects supports a mechanism involving an initial perforation of the protofilament wall. Taken together, our data suggest that katanin is used during meiotic spindle assembly to increase polymer number from a relatively inefficient chromatin-based microtubule nucleation pathway.     

BIK1, a protein required for microtubule function during mating and mitosis in Saccharomyces cerevisiae, colocalizes with tubulin

BIK1 function is required for nuclear fusion, chromosome disjunction, and nuclear segregation during mitosis. The BIK1 protein colocalizes with tubulin to the spindle pole body and mitotic spindle. Synthetic lethality observed in double mutant strains containing a mutation in the BIK1 gene and in the gene for alpha- or beta-tubulin is consistent with a physical interaction between BIK1 and tubulin. Furthermore, over- or underexpression of BIK1 causes aberrant microtubule assembly and function, bik1 null mutants are viable but contain very short or undetectable cytoplasmic microtubules. Spindle formation often occurs strictly within the mother cell, probably accounting for the many multinucleate and anucleate bik1 cells. Elevated levels of chromosome loss in bik1 cells are indicative of defective spindle function. Nuclear fusion is blocked in bik1 x bik1 zygotes, which have truncated cytoplasmic microtubules. Cells overexpressing BIK1 initially have abnormally short or nonexistent spindle microtubules and long cytoplasmic microtubules. Subsequently, cells lose all microtubule structures, coincident with the arrest of division. Based on these results, we propose that BIK1 is required stoichiometrically for the formation or stabilization of microtubules during mitosis and for spindle pole body fusion during conjugation.     

NuMA is required for the proper completion of mitosis

NuMA is a 236-kD intranuclear protein that during mitosis is distributed into each daughter cell by association with the pericentrosomal domain of the spindle apparatus. The NuMA polypeptide consists of globular head and tail domains separated by a discontinuous 1500 amino acid coiled-coil spacer. Expression of human NuMA lacking its globular head domain results in cells that fail to undergo cytokinesis and assemble multiple small nuclei (micronuclei) in the subsequent interphase despite the appropriate localization of the truncated NuMA to both the nucleus and spindle poles. This dominant phenotype is morphologically identical to that of the tsBN2 cell line that carries a temperature-sensitive mutation in the chromatin-binding protein RCC1. At the restrictive temperature, these cells end mitosis without completing cytokinesis followed by micronucleation in the subsequent interphase. We demonstrate that the wild-type NuMA is degraded in the latest mitotic stages in these mutant cells and that NuMA is excluded from the micronuclei that assemble post-mitotically. Elevation of NuMA levels in these mutant cells by forcing the expression of wild-type NuMA is sufficient to restore post-mitotic assembly of a single normal-sized nucleus. Expression of human NuMA lacking its globular tail domain results in NuMA that fails both to target to interphase nuclei and to bind to the mitotic spindle. In the presence of this mutant, cells transit through mitosis normally, but assemble micronuclei in each daughter cell. The sum of these findings demonstrate that NuMA function is required during mitosis for the terminal phases of chromosome separation and/or nuclear reassembly.     

Tubulin composition and microtubule nucleation of a griseofulvin-resistant Chinese hamster ovary cell mutant with abnormal spindles

A griseofulvin-resistant Chinese hamster ovary (CHO) mutant (Grs-2) which has an altered beta-tubulin subunit as well as wild-type beta-tubulin is temperature-sensitive (ts) for growth at 40.5 degrees C. This growth defect appears to result from the formation of abnormal mitotic spindles at the non-permissive temperature (Abraham, I et al., J cell biol 97 (1983) 1055) [19]. Light microscopy of spindles isolated from mutant cells cultured at the permissive temperature showed a typical bipolar morphology, whereas spindles isolated at the non-permissive temperature were multipolar. In order to study the role of tubulin in spindle formation, we analyzed the tubulin composition of the multipolar spindles. Two-dimensional gels and immunoblotting analysis of one-dimensional electrophoretic gels stained with monoclonal anti-Chinese hamster brain beta-tubulin antibody revealed that both mutant and wild-type beta-tubulins were present in similar proportions in both bipolar spindles at 37 degrees C and multipolar spindles at 40.5 degrees C. The ratio between wild-type and mutant tubulin in spindles was also found to be the same as in the cytoplasmic microtubule network in interphase cells, providing evidence that the mutant beta-tubulin appeared to be incorporated in a similar manner into both interphase and mitotic microtubule structures. In vitro microtubule polymerization onto centrosomes prepared from mutant Grs-2 demonstrated that 80% of the sites for microtubule nucleation were without centrioles, suggesting fragmentation of pericentriolar material away from centrioles. This may be one of the causes of multipolar spindle formation in the mutant cells. These results, therefore, suggest that abnormal formation of spindles in mutant cells is due not to the presence of the mutant tubulin per se, but to the abnormal behavior of this mutant tubulin in the cellular environment during mitosis or abnormal interaction with other components in the spindle at 40.5 degrees C.     

The mitotic spindle mediates inheritance of the Golgi ribbon structure

The mammalian Golgi ribbon disassembles during mitosis and reforms in both daughter cells after division. Mitotic Golgi membranes concentrate around the spindle poles, suggesting that the spindle may control Golgi partitioning. To test this, cells were induced to divide asymmetrically with the entire spindle segregated into only one daughter cell. A ribbon reforms in the nucleated karyoplasts, whereas the Golgi stacks in the cytoplasts are scattered. However, the scattered Golgi stacks are polarized and transport cargo. Microinjection of Golgi extract together with tubulin or incorporation of spindle materials rescues Golgi ribbon formation. Therefore, the factors required for postmitotic Golgi ribbon assembly are transferred by the spindle, but the constituents of functional stacks are partitioned independently, suggesting that Golgi inheritance is regulated by two distinct mechanisms.     

Sgt1, a co‐chaperone of Hsp90 stabilizes Polo and is required for centrosome organization

Sgt1 was described previously in yeast and humans to be a Hsp90 co‐chaperone and required for kinetochore assembly. We have identified a mutant allele of Sgt1 in Drosophila and characterized its function. Mutations in sgt1 do not affect overall kinetochore assembly or spindle assembly checkpoint. sgt1 mutant cells enter less frequently into mitosis and arrest in a prometaphase‐like state. Mutations in sgt1 severely compromise the organization and function of the mitotic apparatus. In these cells, centrioles replicate but centrosomes fail to mature, and pericentriolar material components do not localize normally resulting in highly abnormal spindles. Interestingly, a similar phenotype was described previously in Hsp90 mutant cells and correlated with a decrease in Polo protein levels. In sgt1 mutant neuroblasts, we also observe a decrease in overall levels of Polo. Overexpression of the kinase results in a substantial rescue of the centrosome defects; most cells form normal bipolar spindles and progress through mitosis normally. Taken together, these findings suggest that Sgt1 is involved in the stabilization of Polo allowing normal centrosome maturation, entry and progression though mitosis.     

Managing the centrosome numbers game: from chaos to stability in cancer cell division

Aneuploid tumor cells can arise through multipolar mitosis caused by supernumerary centrosomes. Multipolar spindles, however, are antagonistic to cell viability. Thus, most cells derived from such an aberrant mitosis would be eliminated by apoptosis. A rare daughter cell, through chance acquisition of an appropriate chromosome complement and/or gene dosage, could survive and contribute to a clone of aneuploid tumor cells. Survival and perpetuation of the clone, however, requires an additional step - the resumption of mitotic stability through the assembly of a bipolar, not multipolar, spindle. Either selective inactivation of the extra centrosomes or their coalescence into two functional spindle poles corrects the problem of centrosome excess. Current data support coalescence as a mechanism for regulating the number of functional centrosomes in tumor cells.     

The Spindle Midzone Microtubule-Associated Proteins Ase1p and Cin8p Affect the Number and Orientation of Astral Microtubules in Saccharomyces cerevisiae

The nucleus of the budding yeast S. cerevisiae has to move to the bud neck during mitosis in order for proper DNA segregation to take place. This movement is mediated by spindle and astral microtubules, and it relies on forces generated by microtubule-associated motor proteins. When budding yeast cells express the non-cleavable cohesin subunit, Scc1-RRDD, sister chromatid separation is blocked, preventing the spindle from elongating. Thus, in the presence of Scc1-RRDD nuclear positioning is mediated solely by forces acting through astral microtubules. We have previously shown that under these conditions cells exit mitosis with the nucleus in the mother cells, and that the position of the nucleus is determined, at least in part, by the FEAR pathway, which regulates various aspects of mitotic exit. When the FEAR pathway is inactivated, cells expressing Scc1-RRDD exit mitosis with the nucleus in the daughter cells (referred to as a “daughterly phenotype”). In order to find additional proteins that participate in nuclear positioning, we screened a series of mutant strains for those that displayed a daughterly phenotype when Scc1-RRDD was expressed. The most prominent defects were seen in ase1Δ and cin8Δ mutant cells. Both Ase1p and Cin8p were previously shown to be nuclear and to be involved in spindle function. We show here that deletion of ASE1 or CIN8 causes a defect in SPB separation and leads to an abnormal number of astral microtubules and a change in their orientation within the cell. Taken together, these results suggest that in budding yeast Ase1p and Cin8p affect nuclear positioning through astral microtubule-dependent mechanisms.     

Mutation in the beta-tubulin signature motif suppresses microtubule GTPase activity and dynamics, and slows mitosis.

We introduced a threonine-to-glycine point mutation at position 143 in the "tubulin signature motif" 140Gly-Gly-Gly-Thr-Gly-Ser-Gly146 of Saccharomyces cerevisiae beta-tubulin. In an electron diffraction model of the tubulin dimer, this sequence comes close to the phosphates of a guanine nucleotide bound in the beta-tubulin exchangeable E site. Both the GTP-binding affinity and the microtubule (MT)-dependent GTPase activity of tubulin isolated from haploid tub2-T143G mutant cells were reduced by at least 15-fold, compared to tubulin isolated from control wild-type cells. The growing and shortening dynamics of MTs assembled from alphabeta:Thr143Gly-mutated dimers were also strongly suppressed, compared to control MTs. The in vitro properties of the mutated MTs (slower growing and more stable) are consistent with the effects of the tub2-T143G mutation in haploid cells. The average length of MT spindles in large-budded mutant cells was only 3.7 +/- 0.2 microm, approximately half of the size of MT arrays in large-budded wild-type cells (average length = 7.1 +/- 0.4 microm), suggesting that there is a delay in mitosis in the mutant cells. There was also a higher proportion of large-budded cells with unsegregated nuclei in mutant cultures (30% versus 12% for wild-type cells), again suggesting such a delay. The results show that beta:Thr143 of the tubulin signature motif plays an important role in GTP binding and hydrolysis by the beta-tubulin E site and support the idea that tubulins belong to a family of proteins within the GTPase superfamily that are structurally distinct from the classic GTPases, such as EF-Tu and p21(ras). The data also suggest that MT dynamics are critical for MT function in yeast cells and that spindle MT assembly and disassembly could be coordinated with other cell-cycle events by regulating beta-tubulin GTPase activity.     

JMJD5 (Jumonji Domain-containing 5) Associates with Spindle Microtubules and Is Required for Proper Mitosis

Precise mitotic spindle assembly is a guarantee of proper chromosome segregation during mitosis. Chromosome instability caused by disturbed mitosis is one of the major features of various types of cancer. JMJD5 has been reported to be involved in epigenetic regulation of gene expression in the nucleus, but little is known about its function in mitotic process. Here we report the unexpected localization and function of JMJD5 in mitotic progression. JMJD5 partially accumulates on mitotic spindles during mitosis, and depletion of JMJD5 results in significant mitotic arrest, spindle assembly defects, and sustained activation of the spindle assembly checkpoint (SAC). Inactivating SAC can efficiently reverse the mitotic arrest caused by JMJD5 depletion. Moreover, JMJD5 is found to interact with tubulin proteins and associate with microtubules during mitosis. JMJD5-depleted cells show a significant reduction of α-tubulin acetylation level on mitotic spindles and fail to generate enough interkinetochore tension to satisfy the SAC. Further, JMJD5 depletion also increases the susceptibility of HeLa cells to the antimicrotubule agent. Taken together, these results suggest that JMJD5 plays an important role in regulating mitotic progression, probably by modulating the stability of spindle microtubules.     

The Microtubule-Associated Protein ASPM Regulates Spindle Assembly and Meiotic Progression in Mouse Oocytes

The microtubule-associated protein ASPM (abnormal spindle-like microcephaly-associated) plays an important role in spindle organization and cell division in mitosis and meiosis in lower animals, but its function in mouse oocyte meiosis has not been investigated. In this study, we characterized the localization and expression dynamics of ASPM during mouse oocyte meiotic maturation and analyzed the effects of the downregulation of ASPM expression on meiotic spindle assembly and meiotic progression. Immunofluorescence analysis showed that ASPM localized to the entire spindle at metaphase I (MI) and metaphase II (MII), colocalizing with the spindle microtubule protein acetylated tubulin (Ac-tubulin). In taxol-treated oocytes, ASPM colocalized with Ac-tubulin on the excessively polymerized microtubule fibers of enlarged spindles and the numerous asters in the cytoplasm. Nocodazole treatment induced the gradual disassembly of microtubule fibers, during which ASPM remained colocalized with the dynamic Ac-tubulin. The downregulation of ASPM expression by a gene-specific morpholino resulted in an abnormal meiotic spindle and inhibited meiotic progression; most of the treated oocytes were blocked in the MI stage with elongated meiotic spindles. Furthermore, coimmunoprecipitation combined with mass spectrometry and western blot analysis revealed that ASPM interacted with calmodulin in MI oocytes and that these proteins colocalized at the spindle. Our results provide strong evidence that ASPM plays a critical role in meiotic spindle assembly and meiotic progression in mouse oocytes.     

Drosophila Aurora-A is required for centrosome maturation and actin-dependent asymmetric protein localization during mitosis

BACKGROUND: During asymmetric cell division in the Drosophila nervous system, Numb segregates into one of two daughter cells where it is required for the establishment of the correct cell fate. Numb is uniformly cortical in interphase, but in late prophase, the protein concentrates in the cortical area overlying one of two centrosomes in an actin/myosin-dependent manner. What triggers the asymmetric localization of Numb at the onset of mitosis is unclear. RESULTS: We show here that the mitotic kinase Aurora-A is required for the asymmetric localization of Numb. In Drosophila sensory organ precursor (SOP) cells mutant for the aurora-A allele aurA(37), Numb is uniformly localized around the cell cortex during mitosis and segregates into both daughter cells, leading to cell fate transformations in the SOP lineage. aurA(37) mutant cells also fail to recruit Centrosomin (Cnn) and gamma-Tubulin to centrosomes during mitosis, leading to spindle morphology defects. However, Numb still localizes asymmetrically in cnn mutants or after disruption of microtubules, indicating that there are two independent functions for Aurora-A in centrosome maturation and asymmetric protein localization during mitosis. Using photobleaching of a GFP-Aurora fusion protein, we show that two rapidly exchanging pools of Aurora-A are present in the cytoplasm and at the centrosome and might carry out these two functions. CONCLUSIONS: Our results suggest that activation of the Aurora-A kinase at the onset of mitosis is required for the actin-dependent asymmetric localization of Numb. Aurora-A is also involved in centrosome maturation and spindle assembly, indicating that it regulates both actin- and microtubule-dependent processes in mitotic cells.