Topical Cream-Based Dosage Forms of the Macrocyclic Drug Delivery Vehicle Cucurbit[6]uril

The macrocycle family of molecules called cucurbit[n]urils are potential drug delivery vehicles as they are able to form host-guest complexes with many different classes of drugs. This study aimed to examine the utility of Cucurbit[6]uril (CB[6]) in topical cream-based formulations for either localised treatment or for transdermal delivery. Cucurbit[6]uril was formulated into both buffered cream aqueous- and oily cream-based dosage forms. The solid state interaction of CB[6] with other excipients was studied by differential scanning calorimetry and the macrocycle''s transdermal permeability was determined using rat skin. Significant solid state interactions were observed between CB[6] and the other dosage form excipients. At concentrations up to 32% w/w the buffered aqueous cream maintained its normal consistency and could be effectively applied to skin, but the oily cream was too stiff and is not suitable as a dosage form. Cucurbit[6]uril does not permeate through skin; as such, the results imply that cucurbituril-based topical creams may potentially only have applications for localised skin treatment and not for transdermal drug delivery.     

Drug loading into and drug release from pH- and temperature-responsive cylindrical hydrogels

Hydrogels that undergo deformation upon appropriate changes in pH or temperature have considerable promise as drug delivery vehicles. Drug uptake in swelling and nonswelling cylindrical hydrogels and drug release from these into a target fluid are investigated here. A mathematical model for hydrogel-solution composite, a composite of a distributed parameter system (cylindrical hydrogel) and a lumped parameter system (surrounding solution), is developed. The polymer network displacement in a swelling/deswelling hydrogel is described by a stress diffusion coupling model. The analytical solution for network displacement is used to predict solvent intake by swelling hydrogels, solvent efflux from deswelling hydrogels, and changes in pressure, porosity, and effective drug diffusivity. These in turn influence drug uptake during and after hydrogel swelling and drug release from hydrogel during and after deswelling. Numerical results illustrate benefits of hydrogel swelling for drug loading and merits of different modes of drug release. Drug uptake and drug release by temperature-responsive hydrogels are compared with those by hydrogels not subject to deformation.     

Development and Evaluation of New Microemulsion-Based Hydrogel Formulations for Topical Delivery of Fluconazole

The aim of the present investigation was to develop and evaluate microemulsion-loaded hydrogels (MEHs) for the topical delivery of fluconazole (FZ). The solubility of FZ in oils, surfactants and cosurfactants was evaluated to identify the components of the microemulsion. The pseudo-ternary phase diagrams were constructed using the novel phase diagram by micro-plate dilution method. Carbopol EDT 2020 was used to convert FZ-loaded microemulsions into gel form without affecting their structure. The selected microemulsions were assessed for globule size, zeta potential and polidispersity index. Besides this, the microemulsion-loaded hydrogel (MEH) formulations were evaluated for drug content, pH, rheological properties and in vitro drug release through synthetic membrane and excised pig ear skin in comparison with a conventional hydrogel. The optimised MEH FZ formulations consisting of FZ 2%, Transcutol P 11.5% and 11%, respectively, as oil phase, Lansurf SML 20-propyleneglycol 52% and 50%, respectively, as surfactant–cosurfactant (2:1), Carbopol EDT 2020 1.5% as gelling agent and water 34.5% and 37%, respectively, showed highest flux values and high release rate values, and furthermore, they had low surfactant content. The in vitro FZ permeation through synthetic membrane and excised pig ear skin from the studied MEHs was best described by the zero-order and first-order models. Finally, the optimised MEH FZ formulations showed similar or slightly higher antifungal activity as compared to that of conventional hydrogel and Nizoral® cream, respectively. The results suggest the potential use of developed MEHs as vehicles for topical delivery of FZ, encouraging further in vitro and in vivo evaluation.KEY WORDS: fluconazole, in vitro skin permeation, microemulsion, microemulsion-loaded hydrogel, topical     

Temperature-Sensitive Microemulsion Gel: An Effective Topical Delivery System for Simultaneous Delivery of Vitamins C and E

Microemulsions (ME)—nanostructured systems composed of water, oil, and surfactants—have frequently been used in attempts to increase cutaneous drug delivery. The primary objective addressed in this work has been the development of temperature-sensitive microemulsion gel (called gel-like ME), as an effective and safe delivery system suitable for simultaneous topical application of a hydrophilic vitamin C and a lipophilic vitamin E. By changing water content of liquid o/w ME (o/w ME), a gel-like ME with temperature-sensitive rheological properties was formed. The temperature-driven changes in its microstructure were confirmed by rotational rheometry, viscosity measurements, and droplet size determination. The release studies have shown that the vitamins’ release at skin temperature from gel-like ME were comparable to those from o/w ME and were much faster and more complete than from o/w ME conventionally thickened with polymer (o/w ME carbomer). According to effectiveness in skin delivery of both vitamins, o/w ME was found the most appropriate, followed by gel-like ME and by o/w ME carbomer, indicating that no simple correlation between vitamins release and skin absorption could be found. The cytotoxicity studies revealed good cell viability after exposure to ME and confirmed all tested microemulsions as nonirritant. This work was supported by a grant of Slovenian Research Agency.     

In Vitro and In Vivo Evaluation of a Hydrogel Reservoir as a Continuous Drug Delivery System for Inner Ear Treatment

Fibrous tissue growth and loss of residual hearing after cochlear implantation can be reduced by application of the glucocorticoid dexamethasone-21-phosphate-disodium-salt (DEX). To date, sustained delivery of this agent to the cochlea using a number of pharmaceutical technologies has not been entirely successful. In this study we examine a novel way of continuous local drug application into the inner ear using a refillable hydrogel functionalized silicone reservoir. A PEG-based hydrogel made of reactive NCO-sP(EO-stat-PO) prepolymers was evaluated as a drug conveying and delivery system in vitro and in vivo. Encapsulating the free form hydrogel into a silicone tube with a small opening for the drug diffusion resulted in delayed drug release but unaffected diffusion of DEX through the gel compared to the free form hydrogel. Additionally, controlled DEX release over several weeks could be demonstrated using the hydrogel filled reservoir. Using a guinea-pig cochlear trauma model the reservoir delivery of DEX significantly protected residual hearing and reduced fibrosis. As well as being used as a device in its own right or in combination with cochlear implants, the hydrogel-filled reservoir represents a new drug delivery system that feasibly could be replenished with therapeutic agents to provide sustained treatment of the inner ear.     

Preparation and characterization of a novel pachyman-based pharmaceutical aid. II: A pH-sensitive,biodegradable and biocompatible hydrogel for controlled release of protein drugs

In this investigation, the fabrication, physico-chemical and biological characterization of a novel smart hydrogel had been evaluated for its potentials in effective controlling protein delivery. The hydrophilic pachyman-based hydrogel was generated facilely by crosslinking hydrosoluble carboxymethyl pachyman (CMP) with epichlorohydrin (ECH). The ECH concentration possessing maximum (99.7%) encapsulation efficiency and the most appropriate swelling characteristics was found to be 1.25% (w/v). The resultant hydrogel exhibited swelling ratios most favorable for drug release in simulated intestinal media. It could release two model protein drugs (bovine serum albumin and lysozyme) in the controlled manner and with full preservation of the protein stability and enzymatic activity. Importantly, the ECH-CMP hydrogel was confirmed to be biocompatible and biodegradable. From these findings, we were able to conclude that the synthesized pachyman-based hydrogel would be a promising delivery carrier candidate for site-specific delivery of protein drugs.     

Oil-in-water lipid emulsions: implications for parenteral and ocular delivering systems

Lipid emulsions (LEs) are heterogenous dispersions of two immiscible liquids (oil-in-water or water-in-oil) and they are subjected to various instability processes like aggregation, flocculation, coalescence and hence eventual phase separation according to the second law of thermodynamics. However, the physical stability of the LE can substantially be improved with help of suitable emulsifiers that are capable of forming a mono- or multi-layer coating film around the dispersed liquid droplets in such a way to reduce interfacial tension or to increase droplet–droplet repulsion. Depending on the concentrations of these three components (oil–water-emulsifier) and the efficiency of the emulsification equipments used to reduce droplet size, the final LE may be in the form of oil-in-water (o/w), water-in-oil (w/o), micron, submicron and double or multiple emulsions (o/w/o and w/o/w).

The o/w type LEs (LE) are colloidal drug carriers, which have various therapeutic applications. As an intravenous delivery system it incorporates lipophilic water non-soluble drugs, stabilize drugs that tend to undergo hydrolysis and reduce side effects of various potent drugs. When the LE is used as an ocular delivery systems they increase local bioavailability, sustain the pharmacological effect of drugs and decrease systemic side effects of the drugs. Thus, the rationale of using LE as an integral part of effective treatment is clear. Following administration of LE through these routes, the biofate of LE associated bioactive molecules are somehow related to the vehicles disposition kinetics inside blood or eyeball. However, the LE is not devoid from undergoing various bio-process while exerting their efficacious actions. The purpose of this review is therefore to give an implication of LE for parenteral and ocular delivering systems.     

Encapsulation of the peptide Ac-Glu-Thr-Lys-Thr-Tyr-Phe-Trp-Lys-NH2 into polyvinyl alcohol biodegradable formulations—Effect of calcium alginate

It has been recently reported that the peptide Ac-Glu-Thr-Lys-Thr-Tyr-Phe-Trp-Lys-NH₂, analogue of the Glu1811-Lys1818 region of A3 light chain of blood coagulation factor VIII, presents in vitro significant anticoagulant activity. The encapsulation of this peptide into different polyvinyl alcohol formulations is examined here. The formulations were prepared using polyvinyl alcohol cross-linked with either boric acid or glutaraldehyde, giving a series of twelve different hydrogels. In case of PVA-boric acid method, a small percentage of sodium alginate was used in order to avoid bead's agglomeration. In that case, the most efficient encapsulation of the octapeptide (74%) was achieved with 0.2% (w/w) sodium alginate. It was also observed that the increase in sodium alginate percentage leads to beads with increased peptide release time, ranging from 60 to 90 min at 0.02% and 1% (w/w) sodium alginate respectively. The water holding of the PVA gels was estimated to be 27% regardless of the cross-linking reagent used, while it was increased with increasing sodium alginate concentration and reached about 60% for 1% sodium alginate. The longer octapeptide release, at 120 min, was observed with PVA-glutaraldehyde hydrogel, with encapsulation efficiency comparable to those obtained with boric acid, indicating that this hydrogel may be further used in drug delivery systems.     

Poly (l-lysine) based semi-interpenetrating polymer network as pH-responsive hydrogel for controlled release of a model protein drug streptokinase

With the aim of developing a pH-sensitive controlled drug release system, a poly (L-lysine) (PLL) based cationic semi-interpenetrating polymer network (semi-IPN) has been synthesized. This cationic hydrogel was designed to swell at lower pH and de-swell at higher pH and therefore be applicable for achieving regulated drug release at a specific pH range. In addition to the pH sensitivity, this hydrogel was anticipated to interact with an ionic drug, providing another means to regulate the release rate of ionic drugs. This semi-IPN hydrogel was prepared using a free-radical polymerization method and by crosslinking of the polyethylene glycol (PEG)-methacrylate polymer through the PLL network. The two polymers were penetrated with each other via interpolymer complexation to yield the semi-IPN structures. The PLL hydrogel thus prepared showed dynamic swelling/de-swelling behavior in response to pH change, and such a behavior was influenced by both the concentrations of PLL and PEG-methacrylate. Drug release from this semi-IPN hydrogel was also investigated using a model protein drug, streptokinase. Streptokinase release was found to be dependent on its ionic interaction with the PLL backbones as well as on the swelling of the semi-IPN hydrogel. These results suggest that a PLL semi-IPN hydrogel could potentially be used as a drug delivery platform to modulate drug release by pH-sensitivity and ionic interaction.     

Sustained activity and release of leuprolide acetate from an in situ forming polymeric implant

The primary objective of this study was to evaluate the effect of drug loading on the release of leuprolide acetate from an injectable polymeric implant, formed in situ, and efficacy of the released drug in suppressing serum testosterone levels in dogs for at least 90 days. An additional objective was to compare the optimum implant formulation with a commercial microsphere product. Evaluated implant formulations contained 45% w/w 75/25 poly (DL-lactide-co-glycolide) polymer having an intrinsic viscosity of 0.20 dL/g, dissolved in N-methyl-2-pyrrolidone. Irradiated polymer solution was mixed with leuprolide at different drug loads (3%, 4.5%, and 6% w/w) prior to subcutaneous administration to dogs. Dog serum was analyzed for testosterone (RIA) and leuprolide (LC/MS/MS) levels and comparisons within the three implant formulation groups were made. Varying the drug load did not significantly affect the release of leuprolide or efficacy of the implant formulation. Thus, the 6% w/w formulation with the smaller injection volume was selected for comparison with the commercial LUPRON Depot product, which was administered intramuscularly at a similar dosage. These comparisons of serum testosterone and leuprolide levels showed no significant difference in the pharmacologic efficacy even though drug levels were different at a number of points. This was mainly due to associated high standard deviations. Based on these studies, the 6% w/w leuprolide implant formulation was considered to be a suitable candidate for further development. Additional benefits of this system include its simple manufacturing and lower costs.     

Photo-cross-linked hydrogels with polysaccharide-poly(amino acid) structure: new biomaterials for pharmaceutical applications

The aim of this work has been the preparation and characterization of novel hydrogels with polysaccharide-poly(amino acid) structure having suitable physicochemical properties for pharmaceutical applications. In the first step, hyaluronic acid (HA) and alpha,beta-poly(N-2-hydroxyethyl)-DL-aspartamide (PHEA) have been derivatized with methacrylic anhydride (AMA), thus obtaining HA-AMA and PHM derivatives, respectively. In the second step, aqueous solutions of both these derivatives have been irradiated at 313 nm to obtain chemical hydrogels. The hydrogel obtained by irradiating for 15 min an aqueous solution containing 4% w/v of HA-AMA and 4% w/v of PHM resulted in the highest yield. Its swelling ability was dependent on the pH and nature of the external medium. Besides, this hydrogel undergoes a partial hydrolysis, especially in the presence of enzymes, such as esterase or hyaluronidase, but the entity of this degradation is lower than that observed for a hydrogel based on HA-AMA alone. The ability of this hydrogel to entrap drug molecules has been evaluated by using thrombin as a model drug. In vitro release studies and a platelet aggregation test demonstrated that the HA-AMA/PHM hydrogel is able to release thrombin in the active form, thus suggesting its suitability for the treatment of hemorrhages.     

Novel PVA-based hydrogel microparticles for doxorubicin delivery

Micro- and nanoparticles are considered suitable drug delivery systems for their unique features, such as a large surface to volume ratio, and for the possibility to tune their size and hydrophobicity. A polymer/polymer/water emulsion method was used for producing a chemically cross-linked hydrogel made of poly(vinyl alcohol) and of poly(methacrylate) moieties. Mesoscopic investigation of the microparticles was accomplished by laser scanning confocal microscopy. Dynamics of confined water within the gel meshes was studied by quasi-elastic incoherent neutron scattering. Succinoylation of these particles allowed an efficient loading with a maximum doxorubicin payload of about 50% (w/w) of dry microparticles. To evaluate the potentials of such a microdevice for drug delivery, LoVo colon cancer cells have been exposed to doxorubicin loaded microparticles to study the in vitro efficiency of the payload release and the consequent cytotoxic effect.     

Oral Bioavailability Enhancement of Exemestane from Self-Microemulsifying Drug Delivery System (SMEDDS)

Limited aqueous solubility of exemestane leads to high variability in absorption after oral administration. To improve the solubility and bioavailability of exemestane, the self-microemulsifying drug delivery system (SMEDDS) was developed. SMEDDS comprises of isotropic mixture of natural or synthetic oil, surfactant, and cosurfactant, which, upon dilution with aqueous media, spontaneously form fine o/w microemulsion with less than 100 nm in droplet size. Solubility of exemestane were determined in various vehicles. Ternary phase diagrams were plotted to identify the efficient self-emulsification region. Dilution studies, droplet size, and zeta potential of the formulations were investigated. The release of exemestane from SMEDDS capsules was studied using USP dissolution apparatus in different dissolution media and compared the release of exemestane from a conventional tablet. Oral pharmacokinetic study was performed in female Wistar rats (n = 8) at the dose of 30 mg kg⁻¹. The absorption of exemestane from SMEDDS form resulted in about 2.9-fold increase in bioavailability compared with the suspension. Our studies illustrated the potential use of SMEDDS for the delivery of hydrophobic compounds, such as exemestane by the oral route.Key words: bioavailability enhancement, exemestane, microemulsion, SMEDDS     

Formulation,Characterization, and Clinical Evaluation of Microemulsion Containing Clotrimazole for Topical Delivery

The objective of the present study was to formulate and evaluate microemulsion systems for topical delivery of clotrimazole (CTM). The solubility of CTM in various oils was determined to select the oil phase of the microemulsion systems. Pseudoternary phase diagrams were constructed to identify the area of microemulsion existence. Five CTM microemulsion formulations (M1–M5) were prepared and evaluated for their thermodynamic stability, pH, refractive index, droplet size, viscosity, and in vitro release across cellulose membrane. Among the prepared microemulsion formulations, M3 (lemon oil/Tween 80/n-butanol/water) and M4 (isopropyl myristate/Tween 80/n-butanol/water) microemulsion systems were found to be promising according to their physical properties and CTM cumulative percentage release. Gel form of M3 and M4 were prepared using 1% Carbopol 940 as the hydrogel matrix. Both formulations were evaluated in the liquid and gel forms for drug retention in the skin in comparison to the marketed CTM topical cream and their stability examined after storage at 40°C for 6 months. Microemulsion formulations achieved significantly higher skin retention for CTM over the CTM cream. Stability studies showed that M4 preparations were more stable than M3. The in vitro anti-fungal activity of M4 against Candida albicans was higher than that of the conventional cream. Moreover, clinical evaluation proved the efficacy and tolerability of this preparation in the treatment of various topical fungal infections.     

吲哚美辛水凝胶贴剂小鼠体外透皮性能研究

目的：通过研究不同促透剂对吲哚关辛水凝胶贴剂透皮性能的影响,遴选在特定栽药剂量时具有最佳促透效果的促透剂,并与市售贴剂进行比较,对吲哚美辛水凝胶贴剂的体外透皮性能进行评价。方法：采用改良Franz透皮扩散池,以离体小鼠背部皮肤为透皮屏障,在最佳载药量选用不同浓度的氮酮、油酸、丙二醇以及三者组成的二元或三元组合为促透剂,在规定时间点测定吲哚美辛的累积透过百分率以及单位面积累积透过量。结果：与空白对照组相比,当氮酮与油酸单独应用时,二者均没有明显的促透作用;当选用二元促透剂联合应用时,油酸与丙二醇联用能够明显促进吲哚美辛的经皮渗透（P〈0．05）;当选用三元促透剂时促透效果更好,单位面积累积透过量最高可达234．4μg·cm^-2,24h内药物累积透过百分率明显高于市售贴剂。结论：氮酮、油酸、丙二醇三者联合应用可作为吲哚关辛贴剂的理想促透剂。吲哚关辛水凝胶贴剂是具有应用价值的新型经皮控释制剂。     

Design and development of hydrogel beads for targeted drug delivery to the colon

The purpose of this research was to develop and evaluate a multiparticulate system of chitosan hydrogel beads exploiting pH-sensitive property and specific biodegradability for colon-targeted delivery of satranidazole. Chitosan hydrogel beads were prepared by the cross-linking method followed by enteric coating with Eudragit S100. All formulations were evaluated for particle size, encapsulation efficiency, swellability, and in vitro drug release. The size of the beads was found to range from 1.04±0.82 mm to 1.95±0.05 mm. The amount of the drug released after 24 hours from the formulation was found to be 97.67%±1.25% in the presence of extracellular enzymes as compared with 64.71%±1.91% and 96.52%±1.81% release of drug after 3 and 6 days of enzyme induction, respectively, in the presence of 4% cecal content. Degradation of the chitosan hydrogel beads in the presence of extracellular enzymes as compared with rat cecal and colonic enzymes indicates the potential of this multiparticulate system to serve as a carrier to deliver macromolecules specifically to the colon and can be offered as a substitute in vitro system for performing degradation studies. Studies demonstrated that orally administered chitosan hydrogel beads can be used effectively for the delivery of drug to the colon. Published: July 13, 2007     

Encapsulation of ciprofloxacin within modified xanthan gum- chitosan based hydrogel for drug delivery

The aim of the present work was to investigate the preparation of polyelectrolyte hydrogel as potential drug carrier for antibacterial Ciprofloxacin drug (CFX), intended for controlled release formulation. Hydrogel of N-trimehtyl chitosan (TMC)/sodium carboxymethyl xanthan gum (CMXG) was prepared and ciprofloxacin was employed as a model drug to investigate the loading and release performance of the prepared hydrogel. FTIR, DSC, TGA and SEM analysis were used to characterize the TMC/CMXG hydrogel and its CFX loaded hydrogel. The results showed that the ciprofloxacin was successfully incorporated and released from the prepared hydrogel without the loss of structural integrity or the change in its functionality. The encapsulation efficiency of CFX within the prepared hydrogel was found to be increased with increasing the concentration of drug reaching about 93.8 ± 2.1% with concentration of CFX 250 µg/ml. It was shown also that the drug is entrapped within the gel without significant interaction as confirmed from FTIR spectra and DSC analysis. In vitro release study in phosphate buffer saline (PBS), indicated the steady rise in cumulative drug release with the highest release amount, reaching about 96.1 ± 1.8% up to 150 min, whereby the gel with high drug loading efficiency (3.52 ± 0.07%) displayed faster and higher release rate than that of gel containing a smaller amount of drug (0.44 ± 0.01%). The release kinetics of loaded drug followed zero-order kinetics. CFX drug loaded hydrogel showed high activity against the gram positive and gram negative bacterial strains due to the successful released of CFX from the CFX loaded hydrogel into the tested bacterial strains with the highest diameter of inhibition zone against Escherichia coli (67.0 ± 1.0) as compared to reference antibiotic, Gentamicin (28 ± 0.5). Cytotoxicity of the prepared hydrogel was examined in vitro using lung human normal cell lines and showed the highest cell viability (97 ± 0.5%) at concentration up to 50 µg/ml. Consequently, TMC/CMXG hydrogel can be proposed as new controlled release drug delivery system.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.     

Synthesis and Characterization of Pectin/PVP Hydrogel Membranes for Drug Delivery System

The purpose of the present study was to develop and design pectin and polyvinyl pyrrolidone (PVP) blended hydrogel membranes (PEVP), with different pectin: PVP ratios (1:0.2, 1:0.4, 1:0.6, 1:0.8 and 1:1 w/w), which were prepared by using a conventional solution casting technique. An attempt has been made to characterize the hydrogel membranes by various instrumental techniques like, FTIR (Fourier transform infrared) spectroscopy, X-ray diffraction (XRD), Differential scanning calorimetry (DSC), tensile strength test and scanning electron microscopy (SEM). The release patterns of the drug (salicylic acid) from the hydrogel membrane were done in three different release mediums (pH 1.4, pH 7.4 and distilled water) and samples were analyzed spectrophotometrically at 294 nm wavelength on a UV Vis spectrophotometer. MTT assay was done to ensure cytocompatibility of the pectin/PVP hydrogel membranes using B16 melanoma cells. FTIR spectroscopy indicated the presence of secondary amide (I) absorption bands. The XRD study shows decrease in crystallinity of the hydrogel membranes with increase in PVP ratio. DSC study shows an increase in T _g of pectin after blending with PVP. It was found that tensile strength increases with increasing PVP ratios in the hydrogel membranes. The prepared hydrogel membranes were found to be biocompatible with B16 melanoma cells.