A tubular configuration of the granular endoplasmic reticulum forming a raft-like parallel array in the pinealocytes of two species of Japanese moles (Mogera kobeae and M. wogura)

Summary Ten or more straight tubules, each of which consists of a double unit membrane of granular endoplasmic reticulum with a cylindrical profile, are joined side by side in a raft-like configuration in the cytoplasm of the pinealocytes of Japanese moles. They measure about 60 nm and 100 nm in their inner and outer diameters, respectively, and are often partially connected to unspecialized granular endoplasmic reticulum. Cisterns held between the inner and outer unit membranes with cylindrical profiles vary from 15 nm to 30 nm in width. Ensheathed portions of the cytoplasm are contiguous with cytoplasm outside the tubular units. The inner unit membranes of the tubules bear fewer ribosomal particles than the outer ones.     

Tubular structures occurring in cells infected with herpesviruses

Certain viruses belonging to the Herpesviridae family generate tubular structures of three distinct size ranges late in the growth cycle. The smallest tubules are about 10 to 20 nm in diameter, and are restricted to the cell nucleus, tending to form palisades of lattice-like structures. The medium sized tubular structures are about the width of a core particle, measuring 55 to 65 nm in diameter, while the larger tubular structures are the same diameter as viral capsids, about 80 to 100 nm. Both are rigid capsomered structures, which are sometimes encountered outside the cell nucleus budding onto spherical particles. The available data on some properties of the various tubular structures, as well as speculations concerning their nature and significance are briefly reviewed. Their importance is emphasized for antigen and vaccine production, as well as in differentiating herpesviruses by electron microscopy.     

Surfactant protein A is localized at the corners of the pulmonary tubular myelin lattice

Immunogold labeling on sections of a freeze-substituted tubular myelin-enriched fraction isolated from a bronchoalveolar lavage of rat lung showed that surfactant protein A (SP-A) occurs predominantly at the corners of the tubular myelin lattice. Seventy-nine percent of the gold particles were located within 20 nm from a corner. Extracellular SP-A was detected only in the tubular myelin lattice and not in vesicles or secreted lamellar bodies. Ultra-thin cryosections of rat lung fixed in vivo showed that intracellular SP-A was distributed homogeneously over the stacked membranes of lamellar bodies in alveolar Type II cells. The presence of SP-A at the corners of the tubular myelin lattice suggests an important role of this protein in the formation and/or maintenance of this highly ordered lattice.     

Monomolecular surface film and tubular myelin figures of the pulmonary surfactant in hamster lung

Summary Perfusion fixation via pulmonary trunk was applied to the alveolar lining layer in situ at different lung volumes using a fixative containing tannic acid-ferrocyanide osmium. The monomolecular surface film and hypophasic tubular myelin figures were enhanced. In the range of transpulmonary pressure (1–10 cmH₂O), the surface film appeared in the form of a single, electron-dense leaflet, 2.7±0.6 nm (M±SD) in thickness while trilaminar membrane structure was retained in all parts of the tubular myelin figures of the hypophase. The surface film was attached underneath at right angles with trilaminar membranes which formed the outermost parts of the tubular myelin. Such structural continuity was taken to support a view that the phospholipid unit membrane of the tubular myelin figure would be transformed at the hydrophobic phase into a pair of monomolecular leaflets, eventually forming the surface film.     

Two types of virus-like particles in the bean leaf beetle,Cerotoma trifurcata

Two types of virus-like particles were observed in the cytoplasm of hemocytes of the bean leaf beetle, Cerotoma trifurcata. The polyhedral particles were 37–40 nm in diameter and were usually in a crystalline array. They were often associated with granular and laminated structures. The enveloped, spherical particles were 70–75 nm in diameter and were composed of three parts: an outer envelope, a central electron-dense core, and an electron-lucent space between the envelope and the central core. The envelope was similar in structure to the membranes of the cell organelles. These particles were also associated with granular and filamentous structures which were distinct from those associated with the nonenveloped, smaller, polyhedral particles. The nonenveloped particles were recovered in large amounts from partially purified preparations from beetles that contained the particles in thin sections and from soybean loopers, Pseudoplusia includens, which were injected with partially purified preparations from beetles.     

Ultrahistochemical investigations of dog lung surfactant with ruthenium red and iodoplatinate reactions

Summary Dog lungs have been fixed by immersion and submitted to two histochemical procedures. An iodoplatinate reaction technique to demonstrate choline phospholipids stains cell membranes, inclusion bodies of type II alveolar epithelial cells and tubular myelin figures of pulmonary surfactant, the latter as electron-dense lines measuring 5 nm. The ruthenium red procedure gives rise to an intense contrast of the free surface of alveolar epithelium. The 5 nm-lines of the pulmonary surfactant are seen as electron-lucent lines, but bordered by electron-dense rims. Though both techniques have limitations in their interpretation, which are discussed in this paper, they demonstrate the tubular myelin figures to be a highly organized mixture of phospholipids and glycoproteins.     

Ultrahistochemical investigations of dog lung surfactant with ruthenium red and iodoplatinate reactions.

Dog lungs have been fixed by immersion and submitted to two histochemical procedures. An iodoplatinate reaction technique to demontrate choline phospholipids stains cell membranes, inclusion bodies of type II alveolar epithelial cells and tubular myelin figures of pulmonary surfactant, the latter as electron-dense lines measuring 5 nm. The ruthenium red procedure gives rise to an intense contrast of the free surface of alveolar epithelium. The 5 nm-lines of the pulmonary surfactant are seen as electron-lucent lines, but bordered by electron-dense rims. Though both techniques have limitations in their interpretation, which are discussed in this paper, they demonstrate the tubular myelin figures to be a highly organized mixture of phospholipids and glycoproteins.     

The three-dimensional aspect of the mammalian lung surfactant myelin figure.

Rodent and primate lung surfactant was studied at the ultrastructural level utilizing procedures that retained most of the carbohydrates and lipids in thin section. The three-dimensional aspect of tubular myelin surfactant was observed to be four, lipid bilayer membranes oriented at right angles so that in cross-section it was square. In longitudinal section it appeared as two parallel lipid bilayers. Inside the tubular myelin was a homogeneous matrix material that completely filled the tubule except for a small, central area. A single multilamellar body, after it expanded and rearranged lamellae to form tubular myelin surfactant, still retained its basic morphology so that it was possible to determine the number and orientation of bodies that comprised a given surfactant area. This enabled quantification of surfactant by serial sectioning. Each transformed multilamellar body was observed to contain from 2 to 13 groups of tubular myelin, oriented at angles within the transformed body. With three-dimensional understanding, many of the areas previously reported to be homogeneous were determined to actually be oblique cross or longitudinal sections through tubular myelin surfactant.Five distinct layers characterized tubular myelin surfactant: (1) Unexpanded layer—up to 63 recently secreted multilamellar bodies. (2) Formation layerp?aired lamellae expanding and rearranging to form tubules. (3) Mature layer—tubular myelin surfactant. (4) Air-surfactant interface layer—usually a single lipid bilayer which was the outermost layer of tubular myelin of from 1 to 12 transformed multilamellar bodies. (5) Degraded surfactant layer—lipid bilayer spheres were formed at the interface and degraded in the alveolar space.     

Endoplasmic reticulum derived decorated tubules in the sieve elements ofNymphaea

Summary Bundles of decorated tubules found in the sieve elements ofNymphaea have been studied with the transmission electron microscope. Comparatively straight tubules (100 nm in diameter) arise from the endoplasmic reticulum during early stages of sieveelement development and subsequently associate into bundles of up to 100 tubules that parallel the longitudinal cell axis. From the start of their formation the tubules are structurally distinct from other ER profiles due to their dense decoration with particles. High magnifications reveal an orderly array of the particles (about 24 surround a 100 nm tubule) and suggest a modification of their membrane so that it is no longer dissolvable into a regular three-layered structure. Later during sieve-element ontogeny the decorated tubules get invaginated by smooth ER membranes, thereby squeezing out the intratubular (extracytoplasmic) space. As a result a double mantle is formed that surrounds a plasmatic cylinder. Decorated 100 nm tubules with inner membranes are present in enucleate mature sieve elements ofNymphaea alba andN. tuberosa. Considerably larger tubules (about 200 nm in diameter) were found inN. Candida andN. tetragona and occasionally also inNuphar and Barclaya, two other genera from the same family. The decoration of the tubules and their subsequent invagination by smooth membranes are discussed with respect to the controlled autolysis of sieve elements.Dedicated to Prof. Dr. Dr. h.c. Eberhard Schnepf on the occasion of his retirement     

An electron microscopic study of the structural polymorphism of hepatitis B antigen from human sera.

The physical features of hepatitis B antigen (HBAg) particles from human sera are investigated with electron microscopy and immune electron microscopic technique. All the virus-like particles are pleomorphic in structure; although they are classified into two categories: HBsAg and HBcAg by immunological technique. The small, spherical particles measured in a range of 16 to 30 nm in diameter, mostly 20 to 22 nm,are populous in the positive serum. The tubular particles have the width of 18 to 22 nm and the length of 50 to 230 nm or even longer. Sometimes these particles contain a larger end and become the tadpole shape. The large particles or Dane particles measured mainly 42 nm in diameter have an inner core and the outer coats. The inner core of 27 nm in diameter can expose spontaneously. It can be released from the coats by heating at 56 degrees C for 30 min or by treatment of Tween 80 (1%) at room temperature. When specific antibody is added in the positive sample, the aggregate of the antigen-antibody clumping can be revealed with electron microscope. The core antigen of the large particles may attach to the molecular protein of the antibody and show the spike-like structure. This polymorphism of HBAg particles seems unique in animal virology. The roles of these particles played in medical and virological fields are discussed.     

REGULAR STRUCTURES IN MEMBRANES : I. Membranes in the Endocytic Complex of Ileal Epithelial Cells

An "apical endocytic complex" in the ileal lining cells of suckling rats is described. The complex consists of a continuous network of membrane-limited tubules which originate as invaginations of the apical plasma membrane at the base of the microvilli, some associated vesicles, and a giant vacuole. The lumenal surface of this tubular network of membranes and associated vesicles is covered with a regular repeating particulate structure. The repeating unit is an ~7.5-nm diameter particle which has a distinct subunit structure composed of possibly nine smaller particles each ~3 nm in diameter. The ~7.5-nm diameter particles are joined together with a center-to-center separation of ~15 nm to form long rows. These linear aggregates, when arranged laterally, give rise to several square and oblique two-dimensional lattice arrangements of the particles which cover the surface of the membrane. Whether a square or oblique lattice is generated depends on the center-to-center separation of the rows and on the relative displacement of the particles in adjacent rows. Four membrane faces are revealed by fracturing frozen membranes of the apical tubules and vesicles: two complementary inner membrane faces exposed by the fracturing process and the lumenal and cytoplasmic membrane surfaces revealed by etching. The outer membrane face reveals a distinct array of membrane particles. This array also sometimes can be seen on the outer (B) fracture face and is sometimes faintly visible on the inner (A) fracture face. Combined data from sectioned, negatively stained, and freeze-etched preparations indicate that this regular particulate structure is a specialization that is primarily localized in the outer half of the membrane mainly in the outer leaflet.     

The fine structure of a rectifying electrotonic synapse

The synapses between the lateral giant axon and the giant motor axon found in the abdominal ganglia of the ventral nerve cord of the crayfish Procambarus clarkii are electronic. The junctional membrane rectifies, favoring impulse transmission from lateral giant fiber to giant motor fiber. This rectifying electronic junction consists of closely apposed membranes indistinguishable from ordinary arthropod gap junctions. The apposed membranes contain intramembrane particles that are approximately 12.5 nm in width. These particles have a central depression and are arranged in a loosely ordered array with a center-to- center spacing of about 20 nm. The only obvious morphological evidence of asymmetry is the presence of vesicles (about 80 nm in diameter) in the cytoplasm adjacent to the junctional region of the presynaptic lateral giant fiber. Vesicles are not present in the adjacent cytoplasm of the postsynaptic giant motor fiber; however, mitochondria and smooth tubular endoplasmic reticulum are more frequent in the cytoplasm of the giant motor fiber.     

Topography and functional information of plasma membrane

By using atomic force microscope (AFM), the topography and function of the plasmalemma surface of the isolated protoplasts from winter wheat mesophyll cells were observed, and compared with dead protoplasts induced by dehydrating stress. The observational results revealed that the plasma membrane of living protoplasts was in a state of polarization. Lipid layers of different cells and membrane areas exhibited distinct active states. The surfaces of plasma membranes were unequal, and were characterized of regionalisation. In addition, lattice structures were visualized in some regions of the membrane surface. These typical structures were assumed to be lipid molecular complexes, which were measured to be 15.8±0.09 nm in diameter and 1.9±0.3 nm in height. Both two-dimensional and three-dimensional imaging showed that the plasmalemma surfaces of winter wheat protoplasts were covered with numerous protruding particles. In order to determine the chemical nature of the protruding particles, living protoplasts were treated by proteolytic enzyme. Under the effect of enzyme, large particles became relatively looser, resulting that their width was increased and their height decreased. The results demonstrated that these particles were likely to be of protein nature. These protein particles at plasmalemma surface were different in size and unequal in distribution. The diameter of large protein particles ranged from 200 to 440 nm, with a central micropore, and the apparent height of them was found to vary from 12 to 40 nm. The diameter of mid-sized protein particles was between 40―60 nm, and a range of 1.8―5 nm was given for the apparent height of them. As for small protein particles, obtained values were 12―40 nm for their diameter and 0.7―2.2 nm for height. Some invaginated pits were also observed at the plasma membrane. They were formed by the endocytosis of protoplast. Distribution density of them at plasmalemma was about 16 pits per 15 μm2. According to their size, we classified the invaginated pits into two types―larger pits measuring 139 nm in diameter and 7.2 nm in depth, and smaller pits measuring 96 nm in diameter and 2.3 nm in depth. On dehydration-induced dead pro-toplasts, the degree of polarization of plasma membranes decreased. Lipid molecular layers appeared relatively smooth, and the quantity of integral proteins reduced a lot. Invaginated pits were still de-tectable at the membrane surface, but due to dehydration-induced protoplast contraction, the orifice diameter of pits reduced, and their depth increased. Larger pits averagely measuring 47.4 nm in di-ameter and 31.9 nm in depth, and smaller pits measuring 26.5 nm in diameter and 43 nm in depth at average. The measured thickness of plasma membranes of mesophyll cells from winter wheat examined by AFM was 6.6―9.8 nm, thicker in regions covered with proteins.     

Ultrastructural, histochemical, and freeze-fracture evaluation of multilamellated structures in human pulmonary alveolar proteinosis

Ultrastructural, histochemical, and freeze-fracture studies of material recovered by bronchoalveolar lavage from patients with pulmonary alveolar proteinosis revealed four types (A, B, C, and D) of multilamellated structures (MS). Type A, the major component, consisted of concentric, trilaminar structures which were composed of two electron-dense layers and a central lucent layer (5.7-7.5 nm in overall width) alternating with wider (25-30 nm) electron-lucent intervening layers. Type B MS were formed by concentric lamellae with a 5-5.3-nm periodicity. Type C MS were composed of wavy, electron-dense lamellae with a 4-4.5-nm periodicity. Type D MS were conglomerated masses of intricately arranged double or triple electron-dense layers (7.5-13.5 nm wide) alternating with wider (30-40-nm) electron-lucent layers. The electron-dense lamellae of type A, type C, and type D MS were stained with ruthenium red, the Thiéry method, and concanavalin A, indicating the presence of carbohydrate components. Freeze-fracture studies revealed smooth inner and outer surfaces in type A MS, with the fracture planes passing through the central parts of the trilaminar structures; the intervening layers contained 10-nm particles, which probably are proteins. Type B MS had smooth surfaces, and type C MS had slightly particulate surfaces; while type D MS showed tubular or polygonal structures, 350 nm wide, with rows of particles 7-8 nm in diameter. It is concluded that type A and type D MS contain proteins and carbohydrates, probably in the form of glycoproteins, as well as phospholipids, and are related to tubular myelin. Type B and type C MS are considered to contain mainly phospholipids; type C MS are also considered to contain carbohydrates and to be related to lamellar bodies of type II alveolar epithelial cells.     

The sub-membrane reticulum of the human erythrocyte: A scanning electron microscope study

A web-like reticulum underlying the human erythrocyte membrane was studied at a resolution of 5–10 nm by means of a scanning electron microscope. The network was visualized in isolated membranes (ghosts) torn open to reveal their interior space and in residues derived from ghosts extracted with Triton X-100. It formed a continuous (rather than patchy) cover over the entire cytoplasmic surface, except where lifted off or torn away. Filaments (5–40 nm in diameter), annular figures (40–60 nm in diameter), and nodes (30–100 nm in diameter) were prominent in different networks. The dimensions of the filaments and the interstices in the reticulum varied with conditions, suggesting that the network has elastic properties. This reticulum is probably related to the erythrocyte membrane proteins spectrin and actin.     

Cylindrical Phycobilisomes from a Blue-Green Alga, Anabaena variabilis

Cylindrical 52.5-nm-long phycobilisomes were observed in Anabaenavariabilis, differing from the generally accepted hemidiscoidalmorphology. The central part of such a phycobilisome has a network-likefine structure of slightly greater diameter (16 nm) than theconnected end parts of stacked-disc structure (12 nm in diameter).On the basis of this morphology, the molecular mass of thisphycobilisome was calculated to be 3.27?10⁶, about 60% of whichis accounted for by phycocyanin with the rest being due to allophycocyanin.Separately prepared 23 S allophycocyanin particles with a molecularmass of 1.13?10⁶ have the dimensions (16?23 nm) and network-likefine structure similar to the central part of phycobilisomes,while an aggregate form of phycocyanin (18 S) has a fine structureof stacked discs similar to the connecting end part of phycobilisomes,suggesting that the central part constitutes the core at whichthese phycobilisomes attach to the thylakoid membranes. (Received June 5, 1982; Accepted September 21, 1982)     

Developmental events of the pectoral muscle in rainbow trout larvae (Salmo gairdneri)

Skeletal muscles of developing pectoral fins in rainbow trout larvae (Salmo gairdneri) were analyzed by electron microscopy. Large, branched mitochondria were dominant structures in developing myotubes. Mitochondria were associated with the tubular system (T and SR). New mitochondria arose from old ones when the latter extruded whorls of paired membranes surrounding a nonmembranous core. The core was comprised in part of a dense material, presumably, DNA. The developing muscles were characterized by two sets of caveolae which provided the major contributions to the tubular system. Large caveolae gave rise to elements traditionally designated as SR tubules but which later lost their exterior connections. Small caveolae gave rise to small diameter tubules that appear to be analogous to T tubules, which maintained connections with the exterior. Both tubular elements abutted mitochondria. The two elements ran parallel to each other and intersected with each other to form junctions. Each set of elements possessed intratubular junctions.     

Myelinating glia of earthworm giant axons: thermally induced intramembranous changes

The median and lateral giant axons in the ventral nerve cord of the earthworm Lumbricus terrestris are ensheathed by extensive spiral glial cell wrappings which resemble vertebrate myelin. The other, smaller, axons are encompassed by attenuated glial processes, as is typical of invertebrates. The fine structural details of the glial cells have been studied in thin sections and in replicas produced by freeze-fracturing where the intramembranous particle (IMP) populations within the lipid bilayer are visible. These consist of both low-profile IMPs as well as prominent ones 6-8 nm in diameter, scattered at random over the lipid interface in the myelinating glia. The larger IMPs on both P and E faces number about 80/mum2 at 16 degrees C in contrast to the IMP density of 400/mum2 in the other glial membranes. After acclimation to 5, 16 and 26 degrees C, the loose myelin glial membranes show variations in the density of their larger IMP population; in animals acclimated over 3 or more weeks to 5 degrees C, the number of these IMPs is significantly (P less than 0.001) less per unit area than in animals acclimated to 16 or 26 degrees C. The size of the particles at 5 degrees C is significantly (P less than 0.001) smaller than those at 16 or 26 degrees C. When animals are subjected to a sudden differential in ambient temperature, from 26 or 16 to 5 degrees C, or from 5 to 26 degrees C, and their giant axons with encompassing glia are fixed and frozen 30 min after this temperature change, the IMP population of the glial membranes remaining does not appear to alter. The differences in the IMP population of the myelinating glial membranes at different temperatures may reflect the extent to which they insulate and/or influence the velocity of impulse propagation.     

AN ELECTRON MICROSCOPE STUDY OF THE DEVELOPMENT OF A MOUSE HEPATITIS VIRUS IN TISSUE CULTURE CELLS

Samples taken at different intervals of time from suspension cultures of the NCTC 1469 line of mouse liver—derived (ML) cells infected with a mouse hepatitis virus have been studied with the electron microscope. The experiments revealed that the viruses are incorporated into the cells by viropexis within 1 hour after being added to the culture. An increasing number of particles are found later inside dense cytoplasmic corpuscles similar to lysosomes. In the cytoplasm of the cells from the samples taken 7 hours after inoculation, two organized structures generally associated and never seen in the controls are observed: one consists of dense material arranged in a reticular disposition (reticular inclusion); the other is formed by small tubules organized in a complex pattern (tubular body). No evidence has been found concerning their origin. Their significance is discussed. With the progression of the infection a system of membrane-bounded tubules and cisternae is differentiated in the cytoplasm of the ML cells. In the lumen of these tubules or cisternae, which are occupied by a dense material, numerous virus particles are observed. The virus particles which originate in association with the limiting membranes of tubules and cisternae are released into their lumen by a "budding" process. The virus particles are 75 mµ in diameter and possess a nucleoid constituted of dense particles or rods limiting an electron transparent core. The virus limiting membrane is sometimes covered by an outer layer of a dense material. In the cells from the samples taken 14 to 20 hours after inoculation, larger zones of the cell cytoplasm are occupied by inclusion bodies formed by channels or cisternae with their lumens containing numerous virus particles. In the samples taken 20 hours or more after the inoculation numerous cells show evident signs of degeneration.