Construction of vectors for inducible gene expression in Lactobacillus sakei and L plantarum

We have constructed vectors for inducible expression of genes in Lactobacillus sakei and Lactobacillus plantarum. The key elements of these vectors are a regulatable promoter involved in the production of the bacteriocins sakacin A and sakacin P and the genes encoding the cognate histidine protein kinase and response regulator that are necessary to activate this promoter upon induction by a peptide pheromone. The vectors are built up of cassettes that permit easy exchange of all parts through restriction enzyme digestion and ligation. Using beta-glucuronidase as a reporter enzyme, variants of these vectors were compared with each other, and with a corresponding system based on genes involved in the production of nisin. Several of the new vectors permitted tightly controlled and efficient expression of beta-glucuronidase in both L. sakei and L. plantarum.     

Use of bacteriocin promoters for gene expression in Lactobacillus plantarum C11

AIMS: To exploit promoters involved in production of the bacteriocin sakacin P for regulated overexpression of genes in Lactobacillus plantarum C11. METHODS AND RESULTS: Production of sakacin P by Lact. sakei LTH673 is controlled by a peptide-based quorum sensing system that drives strong, regulated promoters. One of these promoters (PorfX) was used to establish regulated overexpression of genes encoding chloramphenicol acetyltransferase from Bacillus pumilus, aminopeptidase N from Lactococcus lactis or chitinase B from Serratia marcescens in Lact. plantarum C11, a strain that naturally possesses the regulatory machinery that is necessary for promoter activation. The expression levels obtained were highly dependent on which gene was used and on how the promoter was coupled to this gene. The highest expression levels (14% of total cellular protein) were obtained with the aminopeptidase N gene translationally fused to the regulated promoter. CONCLUSIONS: Sakacin promoters permit regulated expression of a variety of genes in Lact. plantarum C11. SIGNIFICANCE AND IMPACT OF THE STUDY: This study shows the usefulness of regulated bacteriocin promoters for developing new gene expression systems for lactic acid bacteria, in particular lactobacilli.     

Inhibition of Listeria monocytogenes in chicken cold cuts by addition of sakacin P and sakacin P-producing Lactobacillus sakei

AIMS: To evaluate the potential of sakacin P and sakacin P-producing Lactobacillus sakei for the inhibition of growth of Listeria monocytogenes in chicken cold cuts, by answering the following questions. (i) Is sakacin P actually produced in food? (ii) Is sakacin P produced in situ responsible for the inhibiting effect? (iii) How stable is sakacin P in food? METHODS AND RESULTS: Listeria monocytogenes, a Lact. sakei strain and/or the bacteriocin sakacin P were added to chicken cold cuts, vacuum packed and incubated at 4 or 10 degrees C for 4 weeks. Each of two isogenic Lact. sakei strains, one producing sakacin P and the other not, had an inhibiting effect on the growth of L. monocytogenes. The effect of these two isogenic strains on the growth of L. monocytogenes was indistinguishable, even though sakacin P was produced in the product by one of the two Lact. sakei strains. The addition of purified sakacin P had an inhibiting effect on the growth of L. monocytogenes. A high dosage of sakacin P (3.5 microg x g(-1)) had a bacteriostatic effect throughout the storage period of 4 weeks, while a low dosage (12 ng x g(-1)) permitted initial growth, but at a slow rate. After 4 weeks of storage, the number of L. monocytogenes in the samples with a low dosage of sakacin P was 2 logs below that in the untreated control. When using a high dosage of sakacin P, the bacteriocin was detected in samples stored for up to 6 weeks. CONCLUSIONS: (i) Sakacin P is produced by a Lact. sakei strain when growing on vacuum-packed chicken cold cuts. (ii) Inhibiting effects of Lact. sakei, other than sakacin P, are active in inhibiting the growth of L. monocytogenes growing on chicken cold cuts. (iii) Sakacin P is stable on chicken cold cuts over a period of 4 weeks. SIGNIFICANCE AND IMPACT OF THE STUDY: Both sakacin P and Lact. sakei were found to have potential for use in the control of L. monocytogenes in chicken cold cuts.     

High-level gene expression in Lactobacillus plantarum using a pheromone-regulated bacteriocin promoter

AIMS: To use promoters and regulatory genes involved in the production of the bacteriocin sakacin P to obtain high-level regulated gene expression in Lactobacillus plantarum. METHODS AND RESULTS: In a plasmid containing all three operons naturally involved in sakacin P production, the genes encoding sakacin P and its immunity protein were replaced by the aminopeptidase N gene from Lactococcus lactis (pepN) or the beta-glucuronidase gene from Escherichia coli (gusA). The new genes were precisely fused to the start codon of the sakacin P gene and the stop codon of the immunity gene. This set-up permitted regulated (external pheromone controlled) overexpression of both reporter genes in L. plantarum NC8. For PepN, production levels amounted to as much as 40% of total cellular protein. CONCLUSIONS: Promoters and regulatory genes involved in production of sakacin P are suitable for establishing inducible high-level gene expression in L. plantarum. SIGNIFICANCE AND IMPACT OF THE STUDY: This study describes a system for controllable gene expression in lactobacilli, giving some of the highest expression levels reported so far in this genus.     

An analysis of bacteriocins produced by lactic acid bacteria isolated from malted barley

AIMS: The aim of this study was to perform a detailed characterization of bacteriocins produced by lactic acid bacteria (LAB) isolated from malted barley. METHODS AND RESULTS: Bacteriocin activities produced by eight LAB, isolated from various types of malted barley, were purified to homogeneity by ammonium sulphate precipitation, cation exchange, hydrophobic interaction and reverse-phase liquid chromatography. Molecular mass analysis and N-terminal amino acid sequencing of the purified bacteriocins showed that four non-identical Lactobacillus sakei strains produced sakacin P, while four Leuconostoc mesenteroides strains were shown to produce bacteriocins highly similar or identical to leucocin A, leucocin C or mesenterocin Y105. Two of these bacteriocin-producing strains, Lb. sakei 5 and Leuc. mesenteroides 6, were shown to produce more than one bacteriocin. Lactobacillus sakei 5 produced sakacin P as well as two novel bacteriocins, which were termed sakacin 5X and sakacin 5T. The inhibitory spectrum of each purified bacteriocin was analysed and demonstrated that sakacin 5X was capable of inhibiting the widest range of beer spoilage organisms. CONCLUSION: All bacteriocins purified in this study were class II bacteriocins. Two of the bacteriocins have not been described previously in the literature while the remaining purified bacteriocins have been isolated from environments other than malted barley. SIGNIFICANCE AND IMPACT OF THE STUDY: This study represents a thorough analysis of bacteriocin-producing LAB from malt and demonstrates, for the first time, the variety of previously identified and novel inhibitory peptides produced by isolates from this environment. It also highlights the potential of these LAB cultures to be used as biological controlling agents in the brewing industry.     

Production of sakacin P by Lactobacillus sakei in a completely defined medium

In order to investigate factors influencing the production of the bacteriocin, sakacin P, Lactobacillus sakei CCUG 42687 was grown in a completely defined medium (DML-B) with 33 components. Although the maximum sakacin P concentration obtained was higher on a complex medium due to higher cell mass, the production per cell mass was higher in DML-B. Sakacin P was produced at 4-30 degrees C, with the highest specific production at low temperatures. More sakacin P was produced at uncontrolled pH compared with cultivation at pH 6.3. Tween-80 had a positive effect on sakacin P production, while addition of sodium chloride and trace metals had negative effects. The decrease in sakacin P concentration during the late growth and stationary phases was shown to be cell-independent and promoted at high temperature and pH. Some differences in production levels of sakacin P were found among six strains of Lactobacillus sakei tested.     

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

Functional characterization of a composite bacteriocin locus from malt isolate Lactobacillus sakei 5

Lactobacillus sakei 5, isolated from malted barley, produces three bacteriocins. Genetic and functional analysis of the purified bacteriocins showed that this strain produces a plasmid-encoded bacteriocin that is identical to sakacin P, as well as two novel, chromosomally encoded bacteriocins, which were designated sakacin T and sakacin X. The structural genes specifying sakacin T and sakacin X are part of the sakacin TX locus, which consists of two adjacent but divergently oriented gene clusters. The first gene cluster includes stxP, stxR, stxK, and stxT, which, based on functional and comparative sequence analysis, are believed to encode an inducing peptide and proteins involved in regulation and secretion of these bacteriocins. The second gene cluster includes the structural and immunity genes for sakacin T, a class IIb two-peptide bacteriocin composed of SakTalpha and SakTbeta, and sakacin X, a class IIa bacteriocin. Interestingly, a so-called transport accessory protein was absent from the locus, and based on our results it appears that a dedicated accessory protein is not required for processing and transport of sakacin T and sakacin X.     

Cloning and heterologous production of Hiracin JM79, a Sec-dependent bacteriocin produced by Enterococcus hirae DCH5, in lactic acid bacteria and Pichia pastoris

Hiracin JM79 (HirJM79), a Sec-dependent bacteriocin produced by Enterococcus hirae DCH5, was cloned and produced in Lactococcus lactis, Lactobacillus sakei, Enterococcus faecium, Enterococcus faecalis, and Pichia pastoris. For heterologous production of HirJM79 in lactic acid bacteria (LAB), the HirJM79 structural gene (hirJM79), with or without the HirJM79 immunity gene (hiriJM79), was cloned into the plasmid pMG36c under the control of the constitutive promoter P(32) and into the plasmid pNZ8048 under the control of the inducible P(NisA) promoter. For the production of HirJM79 in P. pastoris, the gene encoding the mature HirJM79 protein was cloned into the pPICZalphaA expression vector. The recombinant plasmids permitted the production of biologically active HirJM79 in the supernatants of L. lactis IL1403, L. lactis NZ9000, L. sakei Lb790, E. faecalis JH2-2, and P. pastoris X-33, the coproduction of HirJM79 and nisin A in L. lactis DPC5598, and the coproduction of HirJM79 and enterocin P in E. faecium L50/14-2. All recombinant LAB produced larger quantities of HirJM79 than E. hirae DCH5, although the antimicrobial activities of most transformants were lower than that predicted from their production of HirJM79. The synthesis, processing, and secretion of HirJM79 proceed efficiently in recombinant LAB strains and P. pastoris.     

Characterization of a New Bacteriocin Operon in Sakacin P-Producing Lactobacillus sakei, Showing Strong Translational Coupling between the Bacteriocin and Immunity Genes

Previous studies of genes involved in the production of sakacin P by Lactobacillus sakei Lb674 revealed the presence of an inducible promoter downstream of the known spp gene clusters. We show here that this promoter drives the expression of an operon consisting of a bacteriocin gene (sppQ), a cognate immunity gene (spiQ), another gene with an unknown function (orf4), and a pseudoimmunity gene containing a frameshift mutation (orf5). The leader peptide of the new one-peptide bacteriocin sakacin Q contains consensus elements that are typical for so-called “double-glycine” leader peptides. The mature bacteriocin shows weak similarity to the BrcA peptide of the two-peptide bacteriocin brochocin C. Sakacin Q has an antimicrobial spectrum that differs from that of sakacin P, thus expanding the antimicrobial properties of the producer strain. The genes encoding sakacin Q and its cognate immunity protein showed strong translational coupling, which was investigated in detail by analyzing the properties of a series of β-glucuronidase fusions. Our results provide experimental evidence that production of the bacteriocin and production of the cognate immunity protein are tightly coregulated at the translational level.     

A novel vector for lactic acid bacteria that uses a bile salt hydrolase gene as a potential food-grade selection marker

A novel vector pM4aB for lactic acid bacterial was developed using a bile salt hydrolase gene from Lactobacillus plantarum as a potential food-grade selection marker. The 3.0-kb pM4aB consisted of the replicon of Lactobacillus plasmid pM4, a multiple cloning site and the bsh gene, which was constructed by elimination of a 5.5-kb non-food-grade DNA fragment from an 8.5-kb intermediate vector pBEmpM4aB. For electroporation into Lactobacillus paracasei X9, a high transformation efficiency of 4.0±1.0×10(4) CFU/μg plasmid DNA was yielded with 0.1% (wt/vol) glycodeoxycholic acid sodium selection. A high segregation stability of the vector was also observed as only 0.1% plasmid was lost after 50 generations of growth without selection pressure. The application potential of pM4aB was further confirmed by expression of a catalase gene from Lactobacillus sakei in L. paracasei. These results revealed that the novel vector pM4aB constructed in this study would be a useful tool for genetic modification of the industrially important LAB.     

Use of green fluorescent protein to monitor Lactobacillus sakei in fermented meat products

Lactobacillus sakei is a lactic acid bacterium naturally found on meat and often used as starter for the production of dry sausages or other fermented meat products. The gene encoding the green fluorescent protein (GFP) was cloned downstream from the constitutive L-lactate dehydrogenase promoter (pldhL) of L. sakei. The pldhL::gfp fusion was introduced in L. sakei either on a replicative plasmid or by double crossover integration into the chromosome, as a single copy. Both constructions were stable. Expression of GFP did not alter growth and was detectable by epifluorescence microscopy allowing the detection and monitoring of the development of GFP+ specific L. sakei strains both under growth laboratory conditions and in dry sausage samples.     

Chitinase from Bacillus licheniformis DSM13: expression in Lactobacillus plantarum WCFS1 and biochemical characterisation

The gene chi, coding for a GH18 chitinase from the Gram-positive bacterium Bacillus licheniformis DSM13 (ATCC 14580), was cloned into the inducible lactobacillal expression vectors pSIP403 and pSIP409, derived from the sakacin-P operon of Lactobacillus sakei, and expressed in the host strain Lactobacillus plantarum WCFS1. Both the complete chi gene including the original bacillal signal sequence as well as the mature chi gene were compared, however, no extracellular chitinase activity was detected with any of the constructs. The chitinase gene was expressed intracellularly as an active enzyme with these different systems, at levels of approximately 5mg of recombinant protein per litre of cultivation medium. Results obtained for the two different expression vectors that only differ in the promoter sequence were well comparable. To further verify the suitability of this expression system, recombinant, His-tagged chitinase Chi was purified from cell extracts of L. plantarum and characterised. The monomeric 65-kDa enzyme can degrade both chitin and chitosan, and shows properties that are very similar to those reported for the native chitinase purified from other B. licheniformis isolates. It shows good thermostability (half lives of stability of 20 and 8.4 days at 37 and 50°C, respectively), and good stability in the pH range of 5-10. The results presented lead the way to overproduction of chitinase in a food-grade system, which is of interest for the food and feed industry.     

Construction and evaluation of shuttle vector, pGYC4α, based on pYC2 from Lactobacillus sakei

The shuttle vector pGYC4α (6,157 bp) was constructed based on the sigma-replicon plasmid pYC2 from Lactobacillus sakei BM5 isolated from kimchi. The vector contained inserts of the ColE1 replicon, α-amylase gene from Bacillus licheniformis containing its own signal peptide, and lactococcal promoter P32. Transformation and expression of a selection marker gene (α-amylase) with pGYC4α were demonstrated in Escherichia coli and several lactic acid bacteria (LAB). The highest α-amylase activity in LAB transformants was obtained in M17/0.25% glucose media with 0.5% CaCO(3). The segregational stability of the shuttle vector in LAB was 100% for more than 100 generations in the absence of antibiotic pressure. The developed vector might be useful as a genetic tool for food industries.     

Purified sakacin A shows a dual mechanism of action against Listeria spp: proton motive force dissipation and cell wall breakdown

Sakacin A was purified to homogeneity through simple chromatographic procedures from cultures of Lactobacillus sakei DSMZ 6333 grown on a low-cost medium. The highly purified protein dissipated both transmembrane potential (ΔΨ) and transmembrane pH gradient (ΔpH) in Listeria cells in a very intense, rapid, and energy-dependent fashion. On a slower timescale, purified sakacin A also showed a lytic activity toward isolated cell walls of Listeria. Mass spectrometry was used to analyze the products of sakacin A action on cell walls, evidencing that sakacin A acts on various types of bonds within peptoglycans.     

Expression of the arginine deiminase pathway genes in Lactobacillus sakei is strain dependent and is affected by the environmental pH

The adaptation of Lactobacillus sakei to a meat environment is reflected in its metabolic potential. For instance, the ability to utilize arginine through the arginine deiminase (ADI) pathway, resulting in additional ATP, represents a competitive benefit. In L. sakei CTC 494, the arc operon (arcABCTDR) shows the same gene order and organization as that in L. sakei 23K, the genome sequence of which is known. However, differences in relative gene expression were found, and these seemed to be optimal in different growth phases, namely, the highest relative gene expression level was in the end exponential growth phase in the case of L. sakei CTC 494 and in the mid-exponential growth phase of L. sakei 23K. Also, the environmental pH influenced the relative expression level of the arc operon, as shown for L. sakei CTC 494, with the highest relative expression level occurring at the optimal pH for growth (pH 6.0). Deviations from this optimal pH (pH 5.0 and pH 7.0) resulted in an overall decline of the relative expression level of all genes of the arc operon. Furthermore, a differential relative expression of the individual genes of the arc operon was found, with the highest relative gene expression occurring for the first two genes of the arc operon (arcA and arcB). Finally, it was shown that some L. sakei strains were able to convert agmatine into putrescine, suggesting an operational agmatine deiminase pathway in these strains, a metabolic trait that is undesirable in meat fermentations. This study shows that this metabolic trait is most probably encoded by a previously erroneously annotated second putative arc operon.     

Inducible and constitutive expression using new plasmid and integrative expression vectors for Thermus sp.

AIMS: To develop molecular tools and examine inducible and constitutive gene expression in Thermus thermophilus. METHODS AND RESULTS: Two plasmid promoter probe vectors and an integrative promoter probe vector were constructed using a promoterless thermostable kanamycin nucleotidyltransferase (KmR) cassette. Three expression vectors were constructed based on a constitutive promoter J17, that functions in both Thermus and Escherichia coli. An inducible expression vector was constructed using the heat-shock inducible promoter (70 to 85 degrees C) from the dnaK gene of T. flavus, and the malate dehydrogenase gene (mdh) from T. flavus was cloned and expressed in both E. coli and T. thermophilus HB27. CONCLUSION: This report describes the construction and use of improved promoter probe and expression vectors for use in Thermus species. The mdh gene can be used as a high temperature (85 degrees C) reporter gene for Thermus sp. The dnaK promoter is thermo-inducible. Significance and Impact of the Study: The expression vectors and molecular tools described here are significant improvements over previously reported vectors for Thermus sp. The mdh gene and the thermo-inducible dnaK promoter will facilitate high temperature studies employing Thermus species.