A collection of sequenced and mapped Ds transposon insertion sites in Arabidopsis thaliana

Insertional mutagenesis is a powerful tool for generating knockout mutations that facilitate associating biological functions with as yet uncharacterized open reading frames (ORFs) identified by genomic sequencing or represented in EST databases. We have generated a collection of Dissociation (Ds) transposon lines with insertions on all 5 Arabidopsis chromosomes. Here we report the insertion sites in 260 independent single-transposon lines, derived from four different Ds donor sites. We amplified and determined the genomic sequence flanking each transposon, then mapped its insertion site by identity of the flanking sequences to the corresponding sequence in the Arabidopsis genome database. This constitutes the largest collection of sequence-mapped Ds insertion sites unbiased by selection against the donor site. Insertion site clusters have been identified around three of the four donor sites on chromosomes 1 and 5, as well as near the nucleolus organizers on chromosomes 2 and 4. The distribution of insertions between ORFs and intergenic sequences is roughly proportional to the ratio of genic to intergenic sequence. Within ORFs, insertions cluster near the translational start codon, although we have not detected insertion site selectivity at the nucleotide sequence level. A searchable database of insertion site sequences for the 260 transposon insertion sites is available at http://sgio2.biotec.psu.edu/sr. This and other collections of Arabidopsis lines with sequence-identified transposon insertion sites are a valuable genetic resource for functional genomics studies because the transposon location is precisely known, the transposon can be remobilized to generate revertants, and the Ds insertion can be used to initiate further local mutagenesis.     

Transposition and gene disruption in the male germline of the mouse

We have tested a synthetic, functional, transposon called Sleeping Beauty for use in mice as a germline insertional mutagen. We describe experiments in which mutagenic, polyadenylation‐site trapping, transposon vectors were introduced into the germline of mice. When doubly transgenic males, expressing the Sleeping Beauty transposase gene (SB10) and harboring poly(A)‐trap transposon vectors, were outcrossed to wild‐type females, offspring were generated with new transposon insertions. The frequency of new transposon insertion is roughly two per male gamete. These new insertions can be passed through the germline to the next generation and can insert into or near genes. We have generated a preliminary library of 24 mice harboring 56 novel insertion sites, including one insertion into a gene represented in the EST database and one in the promoter of the galactokinase (Gck) gene. This technique has promise as a new strategy for forward genetic screens in the mouse or functional genomics. genesis 30:82–88, 2001. © 2001 Wiley‐Liss, Inc.     

A collection of sequenced and mapped Ds transposon insertion sites in Arabidopsis thaliana

Insertional mutagenesis is a powerful tool for generating knockout mutations that facilitate associating biological functions with as yet uncharacterized open reading frames (ORFs) identified by genomic sequencing or represented in EST databases. We have generated a collection of Dissociation(Ds) transposon lines with insertions on all 5 Arabidopsischromosomes. Here we report the insertion sites in 260 independent single-transposon lines, derived from four different Ds donor sites. We amplified and determined the genomic sequence flanking each transposon, then mapped its insertion site by identity of the flanking sequences to the corresponding sequence in the Arabidopsisgenome database. This constitutes the largest collection of sequence-mapped Ds insertion sites unbiased by selection against the donor site. Insertion site clusters have been identified around three of the four donor sites on chromosomes 1 and 5, as well as near the nucleolus organizers on chromosomes 2 and 4. The distribution of insertions between ORFs and intergenic sequences is roughly proportional to the ratio of genic to intergenic sequence. Within ORFs, insertions cluster near the translational start codon, although we have not detected insertion site selectivity at the nucleotide sequence level. A searchable database of insertion site sequences for the 260 transposon insertion sites is available at http://sgio2.biotec.psu.edu/sr. This and other collections of Arabidopsislines with sequence-identified transposon insertion sites are a valuable genetic resource for functional genomics studies because the transposon location is precisely known, the transposon can be remobilized to generate revertants, and the Ds insertion can be used to initiate further local mutagenesis.     

Sleeping Beauty transposition in the mouse genome is associated with changes in DNA methylation at the site of insertion

The Sleeping Beauty (SB) transposon (Tn) system is a nonviral gene delivery tool that has widespread application for transfer of therapeutic genes into the mammalian genome. To determine its utility as a gene delivery system, it was important to assess the epigenetic modifications associated with SB insertion into the genome and potential inactivation of the transgene. This study investigated the DNA methylation pattern of an SB Tn as well as the flanking genomic region at insertion sites in the mouse genome. The ubiquitous ROSA26 promoter and an initial part of the eGFP coding sequence in the SB Tn exhibited high levels of CpG methylation in transgenic mouse lines, irrespective of the chromosomal loci of the insertion sites. In contrast, no detectable CpG methylation in the endogenous mouse ROSA26 counterpart was observed in the same animals. Furthermore, significant hypomethylation was detected in neighboring chromosomal sequences of two unique SB Tn insertions compared to wild-type patterns. Taken together, these results suggest that SB Tn insertions into the mouse genome can be discriminated by DNA methylation machinery from an identical endogenous DNA sequence and can profoundly alter the DNA methylation status of the transgene cargo as well as flanking host genomic regions.     

Genetic mapping of transposon Tn5-induced mutation blocking threonine dehydrogenase in Escherichia coli K-12

The paper deals with a mutant of Escherichia coli K-12 obtained by transposon Tn5 mutagenesis. Insertion of this transposon inactivated the gene for L-threonine dehydrogenase catalysing the first step of L-threonine degradation. The insertion of Tn5 was mapped by using conjugation as well as transduction by T4GT7 and P1. It is located at 81 min of the E. coli genetic map between mtl and pyrE genes.     

ITIS,a bioinformatics tool for accurate identification of transposon insertion sites using next-generation sequencing data

Background

Transposable elements constitute an important part of the genome and are essential in adaptive mechanisms. Transposition events associated with phenotypic changes occur naturally or are induced in insertional mutant populations. Transposon mutagenesis results in multiple random insertions and recovery of most/all the insertions is critical for forward genetics study. Using genome next-generation sequencing data and appropriate bioinformatics tool, it is plausible to accurately identify transposon insertion sites, which could provide candidate causal mutations for desired phenotypes for further functional validation.

Results

We developed a novel bioinformatics tool, ITIS (Identification of Transposon Insertion Sites), for localizing transposon insertion sites within a genome. It takes next-generation genome re-sequencing data (NGS data), transposon sequence, and reference genome sequence as input, and generates a list of highly reliable candidate insertion sites as well as zygosity information of each insertion. Using a simulated dataset and a case study based on an insertional mutant line from Medicago truncatula, we showed that ITIS performed better in terms of sensitivity and specificity than other similar algorithms such as RelocaTE, RetroSeq, TEMP and TIF. With the case study data, we demonstrated the efficiency of ITIS by validating the presence and zygosity of predicted insertion sites of the Tnt1 transposon within a complex plant system, M. truncatula.

Conclusion

This study showed that ITIS is a robust and powerful tool for forward genetic studies in identifying transposable element insertions causing phenotypes. ITIS is suitable in various systems such as cell culture, bacteria, yeast, insect, mammal and plant.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-015-0507-2) contains supplementary material, which is available to authorized users.     

High incidence of transposon Tn3 insertions into a replication control gene of the chimeric R/Ent plasmid pCG86 of Escherichia coli.

Insertion of transposon Tn3 into the chimeric R/Ent plasmid pCG86 occurred preferentially into a replication control gene, generating mutants with increased plasmid copy number. In two mutants, the nucleotide sequence of the region of the gene containing the Tn3 insertion was determined.     

New methods for finding common insertion sites and co-occurring common insertion sites in transposon- and virus-based genetic screens

Insertional mutagenesis screens in mice are used to identify individual genes that drive tumor formation. In these screens, candidate cancer genes are identified if their genomic location is proximal to a common insertion site (CIS) defined by high rates of transposon or retroviral insertions in a given genomic window. In this article, we describe a new method for defining CISs based on a Poisson distribution, the Poisson Regression Insertion Model, and show that this new method is an improvement over previously described methods. We also describe a modification of the method that can identify pairs and higher orders of co-occurring common insertion sites. We apply these methods to two data sets, one generated in a transposon-based screen for gastrointestinal tract cancer genes and another based on the set of retroviral insertions in the Retroviral Tagged Cancer Gene Database. We show that the new methods identify more relevant candidate genes and candidate gene pairs than found using previous methods. Identification of the biologically relevant set of mutations that occur in a single cell and cause tumor progression will aid in the rational design of single and combinatorial therapies in the upcoming age of personalized cancer therapy.     

ESSENTIALS: Software for Rapid Analysis of High Throughput Transposon Insertion Sequencing Data

High-throughput analysis of genome-wide random transposon mutant libraries is a powerful tool for (conditional) essential gene discovery. Recently, several next-generation sequencing approaches, e.g. Tn-seq/INseq, HITS and TraDIS, have been developed that accurately map the site of transposon insertions by mutant-specific amplification and sequence readout of DNA flanking the transposon insertions site, assigning a measure of essentiality based on the number of reads per insertion site flanking sequence or per gene. However, analysis of these large and complex datasets is hampered by the lack of an easy to use and automated tool for transposon insertion sequencing data. To fill this gap, we developed ESSENTIALS, an open source, web-based software tool for researchers in the genomics field utilizing transposon insertion sequencing analysis. It accurately predicts (conditionally) essential genes and offers the flexibility of using different sample normalization methods, genomic location bias correction, data preprocessing steps, appropriate statistical tests and various visualizations to examine the results, while requiring only a minimum of input and hands-on work from the researcher. We successfully applied ESSENTIALS to in-house and published Tn-seq, TraDIS and HITS datasets and we show that the various pre- and post-processing steps on the sequence reads and count data with ESSENTIALS considerably improve the sensitivity and specificity of predicted gene essentiality.     

Clonal Expansion Analysis of Transposon Insertions by High-Throughput Sequencing Identifies Candidate Cancer Genes in a PiggyBac Mutagenesis Screen

Somatic transposon mutagenesis in mice is an efficient strategy to investigate the genetic mechanisms of tumorigenesis. The identification of tumor driving transposon insertions traditionally requires the generation of large tumor cohorts to obtain information about common insertion sites. Tumor driving insertions are also characterized by their clonal expansion in tumor tissue, a phenomenon that is facilitated by the slow and evolving transformation process of transposon mutagenesis. We describe here an improved approach for the detection of tumor driving insertions that assesses the clonal expansion of insertions by quantifying the relative proportion of sequence reads obtained in individual tumors. To this end, we have developed a protocol for insertion site sequencing that utilizes acoustic shearing of tumor DNA and Illumina sequencing. We analyzed various solid tumors generated by PiggyBac mutagenesis and for each tumor >10⁶ reads corresponding to >10⁴ insertion sites were obtained. In each tumor, 9 to 25 insertions stood out by their enriched sequence read frequencies when compared to frequencies obtained from tail DNA controls. These enriched insertions are potential clonally expanded tumor driving insertions, and thus identify candidate cancer genes. The candidate cancer genes of our study comprised many established cancer genes, but also novel candidate genes such as Mastermind-like1 (Mamld1) and Diacylglycerolkinase delta (Dgkd). We show that clonal expansion analysis by high-throughput sequencing is a robust approach for the identification of candidate cancer genes in insertional mutagenesis screens on the level of individual tumors.     

In vitro transposition of Tn552: a tool for DNA sequencing and mutagenesis.

We have explored the potential of the Tn 552 in vitro transposition reaction as a genetic tool. The reaction is simple (requiring a single protein component), robust and efficient, readily producing insertions into several percent of target DNA. Most importantly, Tn 552 insertions in vitro appear to be essentially random. Extensive analyses indicate that the transposon exhibits no significant regional or sequence specificity for target DNA and leaves no discernible 'cold' spots devoid of insertions. The utility of the in vitro reaction for DNA sequencing was demonstrated with a cosmid containing the Mycobacterium smegmatis recBCD gene cluster. The nucleotide sequence of the entire operon was determined using 71 independent Tn 552 insertions, which generated over 13.5 kb of unique sequence and simultaneously provided a comprehensive collection of insertion mutants. The relatively short ends of Tn 552 make construction of novel transposons a simple process and we describe several useful derivatives. The data presented suggest that Tn 552 transposition is a valuable addition to the arsenal of tools available for molecular biology and genomics.     

Target-site preferences of Sleeping Beauty transposons

The Sleeping Beauty (SB) transposon is a Tc1/mariner family transposon that has applications in vertebrate animals for gene transfer, gene-tagging, and human gene therapy. In this study, we analyzed the target-site preferences of the SB transposon. At the genomic level, integration of SB transposons with respect to genes (exons and introns) and intergenic regions appears fairly random but not on a micro-scale. Although there appears to be a consensus sequence around the vicinity of the target sites, the primary sequence is not the determining factor for target selection. When integrations were examined over a limited topography, the sites used most often for integration did not match the consensus sequence. Rather, a unique deformation inherent in the sequence may be a recognition signal for target selection. The deformation is characterized by an angling of the target site such that the axis around the insertion site is off-center, the rotation of the helix (twisting) is non-uniform and there is an increase in the distance between the central base-pairs. Our observations offer several hypothetical insights into the transposition process. Our observations suggest that particular deformations of the double helix predicted by the V(step) algorithm can distinguish TA sites that vary by about 16-fold in their preferences for accommodating insertions of SB transposons.     

The transposon Tn9 generates a 9 bp repeated sequence during integration.

We performed a genetic and sequencing analysis of insertions of the transposon Tn9 into the lac operon of E. coli. Genetic mapping of 70 insertions into lacl and Z shows that starting from the same point on the chromosome, Tn9 goes to at least 50 different points in these two genes. Although there are preferred regions for insertion, these consist of multiple integration points within a small area, as demonstrated by pairwise crosses and restriction mapping. Sequence analysis of three Tn9 insertions reveals that Tn9 integration is associated with a direct repeat of 9 base pairs (bp) of host sequence. We show that these extra 9 nucleotide pairs are generated upon insertion and not brought in with the element.     

RISCI - Repeat Induced Sequence Changes Identifier: a comprehensive,comparative genomics-based, <Emphasis Type="Italic">in silico</Emphasis> subtractive hybridization pipeline to identify repeat induced sequence changes in closely related genomes

Background -  

The availability of multiple whole genome sequences has facilitated in silico identification of fixed and polymorphic transposable elements (TE). Whereas polymorphic loci serve as makers for phylogenetic and forensic analysis, fixed species-specific transposon insertions, when compared to orthologous loci in other closely related species, may give insights into their evolutionary significance. Besides, TE insertions are not isolated events and are frequently associated with subtle sequence changes concurrent with insertion or post insertion. These include duplication of target site, 3' and 5' flank transduction, deletion of the target locus, 5' truncation or partial deletion and inversion of the transposon, and post insertion changes like inter or intra element recombination, disruption etc. Although such changes have been studied independently, no automated platform to identify differential transposon insertions and the associated array of sequence changes in genomes of the same or closely related species is available till date. To this end, we have designed RISCI - 'Repeat Induced Sequence Changes Identifier' - a comprehensive, comparative genomics-based, in silico subtractive hybridization pipeline to identify differential transposon insertions and associated sequence changes using specific alignment signatures, which may then be examined for their downstream effects.     

Computational identification of insertional mutagenesis targets for cancer gene discovery

Insertional mutagenesis is a potent forward genetic screening technique used to identify candidate cancer genes in mouse model systems. An important, yet unresolved issue in the analysis of these screens, is the identification of the genes affected by the insertions. To address this, we developed Kernel Convolved Rule Based Mapping (KC-RBM). KC-RBM exploits distance, orientation and insertion density across tumors to automatically map integration sites to target genes. We perform the first genome-wide evaluation of the association of insertion occurrences with aberrant gene expression of the predicted targets in both retroviral and transposon data sets. We demonstrate the efficiency of KC-RBM by showing its superior performance over existing approaches in recovering true positives from a list of independently, manually curated cancer genes. The results of this work will significantly enhance the accuracy and speed of cancer gene discovery in forward genetic screens. KC-RBM is available as R-package.