Effect of divalent cations on the porcine kidney cortex membrane-bound form of dipeptidyl peptidase IV

Dipeptidyl peptidase IV is an ectopeptidase with multiple physiological roles including the degradation of incretins, and a target of therapies for type 2 diabetes mellitus. Divalent cations can inhibit its activity, but there has been little effort to understand how they act. The intact membrane-bound form of porcine kidney dipeptidyl peptidase IV was purified by a simple and fast procedure. The purified enzyme hydrolyzed Gly-Pro-p-nitroanilide with an average V(max) of 1.397±0.003 μmol min(-1) mL(-1), k(cat) of 145.0±1.2 s(-1), K(M) of 0.138±0.005 mM and k(cat)/K(M) of 1050 mM(-1) s(-1). The enzyme was inhibited by bacitracin, tosyl-L-lysine chloromethyl ketone, and by the dipeptidyl peptidase IV family inhibitor L-threo-Ile-thiazolidide (K(i) 70 nM). The enzyme was inhibited by the divalent ions Ca(2+), Co(2+), Cd(2+), Hg(2+) and Zn(2+), following kinetic mechanisms of mixed inhibition, with K(i) values of 2.04×10(-1), 2.28×10(-2), 4.21×10(-4), 8.00×10(-5) and 2.95×10(-5) M, respectively. According to bioinformatic tools, Ca(2+) ions preferentially bound to the β-propeller domain of the porcine enzyme, while Zn(2+) ions to the α-β hydrolase domain; the binding sites were strikingly conserved in the human enzyme and other homologues. The functional characterization indicates that porcine and human homologues have very similar functional properties. Knowledge about the mechanisms of action of divalent cations may facilitate the design of new inhibitors.     

Overexpression and divalent metal binding properties of the methionyl aminopeptidase from Pyrococcus furiosus

The gene encoding for the methionyl aminopeptidase from the hyperthermophilic archaeon Pyrococcus furiosus (PfMetAP-II; EC 3.4.11.18) has been inserted into a pET 27b(+) vector and overexpressed in Escherichia coli. The new expression system resulted in a 5-fold increase in purified enzyme obtained from a 5 L fermentor growth. The as-purified PfMetAP-II enzyme, to which no exogenous metal ions or EDTA was added, was found to have 1.2 equiv of zinc and 0.1 equiv of iron present by ICP-AES analysis. This enzyme had a specific activity of 5 units/mg, a 60-fold decrease from the fully loaded Fe(II) enzymes. When an additional 2 equiv of Zn(II) was added to the as-purified PfMetAP-II, no activity could be detected. The combination of these data with previously reported whole cell studies on EcMetAP-I further supports the suggestion that the in vivo metal ion for all MetAP's is Fe(II). Both Co(II)- and Fe(II)-loaded PfMetAP-II showed similar substrate specificities to EcMetAP-I. Substrate binding was largely affected by the amino acid in the P1 position and the length of the polypeptide. The substrates MSSHRWDW and MP-p-NA showed the smallest K(m) values while the substrates MGMM and MP-p-NA provided the highest turnover. The catalytic efficiency (k(cat)/K(m)) of PfMetAP-II for MP-p-NA at 30 degrees C was 799 500 and 340 930 M(-1) s(-1) for Co(II)- and Fe(II)-loaded PfMetAP-II, respectively. Maximum catalytic activity was obtained with 1 equiv of Co(II) or Fe(II), and the dissociation constants (K(d)) for the first metal binding site were found to be 50 +/- 15 and 20 +/- 15 nM for Co(II)- and Fe(II)-substituted PfMetAP-II, respectively. Electronic absorption spectral titration of a 1 mM sample of apo-PfMetAP-II with Co(II) provided a dissociation constant of 0.35 +/- 0.02 mM for the second metal binding site, a 17500-fold increase compared to the first metal binding site. The electronic absorption data also indicated that both Co(II) ions reside in a pentacoordinate geometry. PfMetAP-II shows unique thermostability and the optimal temperature for substrate turnover was found to be approximately 85 degrees C at pH 7.5 in 25 mM Hepes and 150 mM KCl buffer. The hydrolysis of MGMM was measured in triplicate between 25 and 85 degrees C at eight substrate concentrations ranging from 2 to 20 mM. Both specific activity and K(m) values increased with increasing temperature. An Arrhenius plot was constructed from the k(cat) values and was found to be linear over the temperature range 25-85 degrees C, indicating that the rate-limiting step in PfMetAP-II peptide hydrolysis does not change as a function of temperature. Co(II)- and Fe(II)-loaded PfMetAP-II have similar activation energies (13.3 and 19.4 kJ/mol, respectively). The thermodynamic parameters calculated at 25 degrees C are as follows: DeltaG++ = 46.23 kJ/mol, DeltaH++ = 10.79 kJ/mol, and DeltaS++ = -119.72 J.mol(-1).K(-1) for Co(II)-loaded PfMetAP; DeltaG++ = 46.44 kJ/mol, DeltaH++ = 16.94 kJ/mol, and DeltaS++ = -99.67 J.mol(-1).K(-1) for Fe(II)-loaded PfMetAP. Interestingly, at higher temperatures (> 50 degrees C), Fe(II)-loaded PfMetAP-II is more active (1.4-fold at 85 degrees C) than Co(II)-loaded PfMetAP-II.     

Constitutive expression, purification and characterization of a phosphoglucomutase from Fusarium oxysporum

The phosphoglucomutase gene from a wild type Fusarium oxysporum strain (F3), was homologously expressed, under the control of the constitutive promoter of gpdA of Aspergillus nidulans. The transformant produced elevated levels of phosphoglucomutase activity compared to the wild type, a fact that facilitated the subsequent purification procedure. The enzyme (FoPGM) was purified to homogeneity applying three anion exchange and one gel filtration chromatography steps. The native enzyme revealed a monomeric structure with a molecular mass of 60 kDa, while the isoelectric point was 3.5. FoPGM was active in pH ranged from 6.0 to 8.0, with an optimum using 3-(N-morpholino)propanesulfonic acid buffer at 7.0, while loss of activity was observed when phosphate buffer was used in the above mentioned pH range. The optimal temperature for activity was 45°C but the enzyme became unstable at temperatures above 40°C. FoPGM requires the presence of a divalent cation for its function with maximum activity being obtained with Co(2+). The apparent K(m) for Co(2+) was found to be 10 μM. The enzyme was also active with other divalent metal ions such as Mn(2+), Mg(2+), Ni(2+) and Ca(2+) but to a lesser extent. The following kinetic constants were determined: v(max), 0.74 μmol mg(protein)(-1)min(-1); k(cat), 44.2 min(-1); K(m)(G1P), 0.10mM; K(m)(G1,6 diP), 1.03 μM; k(cat)/K(m)(G1P), 443 mM(-1)min(-1) and k(cat)/K(m)(G1,6 diP), 42,860 mM(-1)min(-1). The enzyme was considered to follow a Ping Pong substituted enzyme or enzyme isomerization mechanism.     

Differentiation of the slow-binding mechanism for magnesium ion activation and zinc ion inhibition of human placental alkaline phosphatase

The binding mechanism of Mg(2+) at the M3 site of human placental alkaline phosphatase was found to be a slow-binding process with a low binding affinity (K(Mg(app.)) = 3.32 mM). Quenching of the intrinsic fluorescence of the Mg(2+)-free and Mg(2+)-containing enzymes by acrylamide showed almost identical dynamic quenching constant (K(sv) = 4.44 +/- 0.09 M(-1)), indicating that there is no gross conformational difference between the M3-free and the M3-Mg(2+) enzymes. However, Zn(2+) was found to have a high affinity with the M3 site (K(Zn(app.)) = 0.11 mM) and was observed as a time-dependent inhibitor of the enzyme. The dependence of the observed transition rate from higher activity to lower activity (k(obs)) at different zinc concentrations resulted in a hyperbolic curve suggesting that zinc ion induces a slow conformational change of the enzyme, which locks the enzyme in a conformation (M3'-Zn) having an extremely high affinity for the Zn(2+) (K*(Zn(app.)) = 0.33 microM). The conformation of the M3'-Zn enzyme, however, is unfavorable for the catalysis by the enzyme. Both Mg(2+) activation and Zn(2+) inhibition of the enzyme are reversible processes. Structural information indicates that the M3 site, which is octahedrally coordinated to Mg(2+), has been converted to a distorted tetrahedral coordination when zinc ion substitutes for magnesium ion at the M3 site. This conformation of the enzyme has a small dynamic quenching constant for acrylamide (K(sv) = 3.86 +/- 0.04 M(-1)), suggesting a conformational change. Both Mg(2+) and phosphate prevent the enzyme from reaching this inactive structure. GTP plays an important role in reactivating the Zn-inhibited enzyme activity. We propose that, under physiological conditions, magnesium ion may play an important modulatory role in the cell for protecting the enzyme by retaining a favorable geometry of the active site needed for catalysis.     

Kinetics and thermodynamics of a novel endoglucanase (CMCase) from <Emphasis Type="Italic">Gymnoascella </Emphasis><Emphasis Type="Italic">citrina</Emphasis> produced under solid-state condition

Gymnoascella citrina produced two isoforms of endoglucanases (CMCase-I and -capital I, Ukrainiancapital I, Ukrainian) under solid-state condition. Purified CMCase-I was novel because it was apparently holoenzyme in nature. The enzyme was monomeric as its native and subunit mass were almost the same, i.e., 43 and 42 kDa, respectively. Ea for carboxymethylcellulose (CMC) hydrolysis was 36.2 kJ mol(-1). The enzyme was stable over a pH range of 3.5-6.5, while temperature optimum was 55 degrees C. Vmax, Km and k (cat )for CMC hydrolysis were 39 U mg(-1) protein, 6.25 mg CMC mL(-1) and 27.5 s(-1), respectively. The pKa1 and pKa2 of ionizable groups of active site were 2.8 and 7.4, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: DeltaH*=33.5 kJ mol(-1), DeltaG*=70.42 kJ mol(-1) and DeltaS*=-114.37 J mol(-1) K(-1). The removal of metals resulted into complete loss of enzymatic activity and was completely recovered in the presence of 1 mM Mn2+, whereas inhibition initiated at 5 mM. The other metals like Ca2+, Zn2+ and K1+ showed no inhibition up to 7 mM, Co2+ completely inhibited the activity, while Mg2+ could not recover the initial activity up to 7 mM. So we are reporting for the first time, kinetics and thermodynamics of CMCase-Iota from G. citrina.     

The inhibition kinetics and thermodynamic changes of tyrosinase via the zinc ion

We found that Zn(2+) conspicuously inactivated tyrosinase in a mixed-type inhibition manner: the final level of residual activity was abolished at the equilibrium state with concentration of 0.25 mM Zn(2+). Changes of both K(m) and V(max) by various concentrations of Zn(2+) in Lineweaver-Burk plot were observed. To see whether Zn(2+) also induced conformational change of tyrosinase and how thermodynamical changes by ligand binding were occurred, the intrinsic fluorescence studies as well as calorimetric measurements were conducted. The results showed that the Zn(2+) binding to tyrosinase directly induced conformational change of tyrosinase, and the changes of thermodynamic parameters such as enthalpy (DeltaH), Gibbs free-energy (DeltaG), and entropy (DeltaS) were obtained as 60+/-7.0 kJ/mol, -14.54 kJ/mol and 248.53 J/(K mol), respectively. The inactivating effect of Zn(2+) on tyrosinase was completely prevented by incubation with bovine serum albumin, which has a Zn(2+) binding motif in its structure. We suggested that Zn(2+) ligand-binding affected the substrate's accessibility due to the conformational changes and thus, the complex type of inhibition has occurred with the calorimetric changes.     

Catalytic mechanism and three-dimensional structure of adenine deaminase

Adenine deaminase (ADE) catalyzes the conversion of adenine to hypoxanthine and ammonia. The enzyme isolated from Escherichia coli using standard expression conditions was low for the deamination of adenine (k(cat) = 2.0 s(-1); k(cat)/K(m) = 2.5 × 10(3) M(-1) s(-1)). However, when iron was sequestered with a metal chelator and the growth medium was supplemented with Mn(2+) prior to induction, the purified enzyme was substantially more active for the deamination of adenine with k(cat) and k(cat)/K(m) values of 200 s(-1) and 5 × 10(5) M(-1) s(-1), respectively. The apoenzyme was prepared and reconstituted with Fe(2+), Zn(2+), or Mn(2+). In each case, two enzyme equivalents of metal were necessary for reconstitution of the deaminase activity. This work provides the first example of any member of the deaminase subfamily of the amidohydrolase superfamily to utilize a binuclear metal center for the catalysis of a deamination reaction. [Fe(II)/Fe(II)]-ADE was oxidized to [Fe(III)/Fe(III)]-ADE with ferricyanide with inactivation of the deaminase activity. Reducing [Fe(III)/Fe(III)]-ADE with dithionite restored the deaminase activity, and thus, the diferrous form of the enzyme is essential for catalytic activity. No evidence of spin coupling between metal ions was evident by electron paramagnetic resonance or Mo?ssbauer spectroscopy. The three-dimensional structure of adenine deaminase from Agrobacterium tumefaciens (Atu4426) was determined by X-ray crystallography at 2.2 ? resolution, and adenine was modeled into the active site on the basis of homology to other members of the amidohydrolase superfamily. On the basis of the model of the adenine-ADE complex and subsequent mutagenesis experiments, the roles for each of the highly conserved residues were proposed. Solvent isotope effects, pH-rate profiles, and solvent viscosity were utilized to propose a chemical reaction mechanism and the identity of the rate-limiting steps.     

Characterization of the cupin-type phosphoglucose isomerase from the hyperthermophilic archaeon Thermococcus litoralis

The gene encoding phosphoglucose isomerase was cloned from Thermococcus litoralis, and functionally expressed in Escherichia coli. The purified enzyme, a homodimer of 21.5 kDa subunits, was biochemically characterized. The inhibition constants for four competitive inhibitors were determined. The enzyme contained 1.25 mol Fe and 0.24 mol Zn per dimer. The activity was enhanced by the addition of Fe(2+), but inhibited by Zn(2+) and EDTA. Enzymes with mutations in conserved histidine and glutamate residues in their cupin motifs contained no metals, and showed large decreases in k(cat). The circular dichroism spectra of the mutant enzymes and the wild type enzyme were essentially the same but with slight differences.     

Inhibition of Na+/K(+)-ATPase and Mg(2+)-ATPase by metal ions and prevention and recovery of inhibited activities by chelators

Kinetics and inhibition of Na(+)/K(+)-ATPase and Mg(2+)-ATPase activity from rat synaptic plasma membrane (SPM), by separate and simultaneous exposure to transition (Cu(2+), Zn(2+), Fe(2+) and Co(2+)) and heavy metals (Hg(2+) and Pb(2+)) ions were studied. All investigated metals produced a larger maximum inhibition of Na(+)/K(+)-ATPase than Mg(2+)-ATPase activity. The free concentrations of the key species (inhibitor, MgATP(2-), MeATP(2-)) in the medium assay were calculated and discussed. Simultaneous exposure to the combinations Cu(2+)/Fe(2+) or Hg(2+)/Pb(2+) caused additive inhibition, while Cu(2+)/Zn(2+) or Fe(2+)/Zn(2+) inhibited Na(+)/K(+)-ATPase activity synergistically (i.e., greater than the sum metal-induced inhibition assayed separately). Simultaneous exposure to Cu(2+)/Fe(2+) or Cu(2+)/Zn(2+) inhibited Mg(2+)-ATPase activity synergistically, while Hg(2+)/Pb(2+) or Fe(2+)/Zn(2+) induced antagonistic inhibition of this enzyme. Kinetic analysis showed that all investigated metals inhibited Na(+)/K(+)-ATPase activity by reducing the maximum velocities (V(max)) rather than the apparent affinity (Km) for substrate MgATP(2-), implying the noncompetitive nature of the inhibition. The incomplete inhibition of Mg(2+)-ATPase activity by Zn(2+), Fe(2+) and Co(2+) as well as kinetic analysis indicated two distinct Mg(2+)-ATPase subtypes activated in the presence of low and high MgATP(2-) concentration. EDTA, L-cysteine and gluthathione (GSH) prevented metal ion-induced inhibition of Na(+)/K(+)-ATPase with various potencies. Furthermore, these ligands also reversed Na(+)/K(+)-ATPase activity inhibited by transition metals in a concentration-dependent manner, but a recovery effect by any ligand on Hg(2+)-induced inhibition was not obtained.     

Inositol-1-phosphate synthase from Archaeoglobus fulgidus is a class II aldolase

A gene putatively identified as the Archaeoglobus fulgidus inositol-1-phosphate synthase (IPS) gene was overexpressed to high level (about 30-40% of total soluble cellular proteins) in Escherichia coli. The recombinant protein was purified to homogeneity by heat treatment followed by two column chromatographic steps. The native enzyme was a tetramer of 168 +/- 4 kDa (subunit molecular mass of 44 kDa). At 90 degrees C the K(m) values for glucose-6-phosphate and NAD(+) were estimated as 0.12 +/- 0.04 mM and 5.1 +/- 0.9 microM, respectively. Use of (D)-[5-(13)C]glucose-6-phosphate as a substrate confirmed that the stereochemistry of the product of the IPS reaction was L-myo-inositol-1-phosphate. This archaeal enzyme, with the highest activity at its optimum growth temperature among all IPS reported (k(cat) = 9.6 +/- 0.4 s(-1) with an estimated activation energy of 69 kJ/mol), was extremely heat stable. However, the most unique feature of A. fulgidus IPS was that it absolutely required divalent metal ions for activity. Zn(2+) and Mn(2+) were the best activators with K(D) approximately 1 microM, while NH(4)(+) (a critical activator for all the other characterized IPS enzymes) had no effect on the enzyme. These properties suggested that this archaeal IPS was a class II aldolase. In support of this, stoichiometric reduction of NAD(+) to NADH could be followed spectrophotometrically when EDTA was present along with glucose-6-phosphate.     

Kinetics and energetics of the binding between barley alpha-amylase/subtilisin inhibitor and barley alpha-amylase 2 analyzed by surface plasmon resonance and isothermal titration calorimetry

The kinetics and energetics of the binding between barley alpha-amylase/subtilisin inhibitor (BASI) or BASI mutants and barley alpha-amylase 2 (AMY2) were determined using surface plasmon resonance and isothermal titration calorimetry (ITC). Binding kinetics were in accordance with a 1:1 binding model. At pH 5.5, [Ca(2+)] = 5 mM, and 25 degrees C, the k(on) and k(off) values were 8.3 x 10(+4) M(-1) s(-1) and 26.0 x 10(-4) s(-1), respectively, corresponding to a K(D) of 31 nM. K(D) was dependent on pH, and while k(off) decreased 16-fold upon increasing pH from 5.5 to 8.0, k(on) was barely affected. The crystal structure of AMY2-BASI shows a fully hydrated Ca(2+) at the protein interface, and at pH 6.5 increase of [Ca(2+)] in the 2 microM to 5 mM range raised the affinity 30-fold mainly due to reduced k(off). The K(D) was weakly temperature-dependent in the interval from 5 to 35 degrees C as k(on) and k(off) were only increasing 4- and 12-fold, respectively. A small salt dependence of k(on) and k(off) suggested a minor role for global electrostatic forces in the binding and dissociation steps. Substitution of a positively charged side chain in the mutant K140L within the AMY2 inhibitory site of BASI accordingly did not change k(on), whereas k(off) increased 13-fold. ITC showed that the formation of the AMY2-BASI complex is characterized by a large exothermic heat (Delta H = -69 +/- 7 kJ mol(-1)), a K(D) of 25 nM (27 degrees C, pH 5.5), and an unfavorable change in entropy (-T Delta S = 26 +/- 7 kJ mol(-1)). Calculations based on the thermodynamic data indicated minimal structural changes during complex formation.     

Identification of a puromycin-sensitive aminopeptidase from zebrafish (Danio rerio)

An aminopeptidase from zebrafish (Danio rerio) was purified 1247-fold to homogeneity with 35.4% recovery by column chromatography successively on DEAE-sephacel, hydroxyapatite, and phenyl-sepharose. The molecular mass of the enzyme was estimated at 98 kDa by SDS-PAGE and gel filtration. Optimum temperature and pH of the enzyme were 45°C and 7.5, respectively. The enzyme preferentially hydrolyzed substrate Leu-MCA with k(cat)/K(m) of 4.2×10(6)M(-1)s(-1) and an activation energy of 68.9 kJ M(-1) [corrected], respectively. It was specifically inhibited by bestatin, puromycin and metal-chelating agents, and Zn(2+) seemed to be its metal cofactor(s). Some l-amino acids significantly inhibited its activity, and l-cysteine was a non-competitive inhibitor with a K(i) of 0.27 mM. According to the peptide mass fingerprint analysis, the enzyme was highly matched with the predicted D. rerio aminopeptidase puromycin sensitive (gi: 255683530) (EC 3.4.11.14), suggesting that the present enzyme is a puromycin-sensitive aminopeptidase of zebrafish.     

Characterization of exo-(1,4)-alpha glucan lyase from red alga Gracilaria chorda. Activation, inactivation and the kinetic properties of the enzyme

Exo-(1,4)-alpha glucan lyase (GLase) was purified from a red alga Gracilaria chorda. The enzyme was activated 1.3-fold in the presence of Ca(2+) and Cl(-) ions. The ions also stabilized the enzyme increasing the temperature of its maximum activity from 45 degrees C to 50 degrees C. GLase was inactivated by chemical modification with carbodiimide and a carboxyl group of the enzyme was shown essential to the lyase activity. A tryptophanyl residue(s) was also shown to be important for the activity and was probably involved in substrate binding. K(m) values of the enzyme were 2.3 mM for maltose, 0.4 mM for maltotriose and 0.1 mM for maltooligosaccharides of degree of polymerization (dp) 4-7, and the k(0) values for the oligosaccharides were similar (42-53 s(-1)). The analysis of these kinetic parameters showed that the enzyme has four subsites to accommodate oligosaccharides. The subsite map of GLase was unique, since subsite 1 and subsite 2 have large positive and small negative affinities, respectively. The subsite map of this type has not been found in other enzymes with exo-action on alpha-1,4-glucan. The K(m) and k(0) values for the polysaccharides were lower (0.03 mM) and higher (60-100 s(-1)), respectively, suggesting the presence of another affinity site specific to the polysaccharides.     

Characterization of a novel mammalian phosphatase having sequence similarity to Schizosaccharomyces pombe PHO2 and Saccharomyces cerevisiae PHO13

p34, a specific p-nitrophenyl phosphatase (pNPPase) was identified and purified from the murine cell line EL4 in a screen for the intracellular molecular targets of the antiinflammatory natural product parthenolide. A BLAST search analysis revealed that it has a high degree of sequence similarity to two yeast alkaline phosphatases. We have cloned, sequenced, and expressed p34 as a GST-tagged fusion protein in Escherichia coli and an EE-epitope-tagged fusion protein in mammalian cells. Using p-nitrophenyl phosphate (pNPP) as a substrate, p34 is optimally active at pH 7.6 with a K(m) of 1.36 mM and K(cat) of 0.052 min(-1). Addition of 1 mM Mg(2+) to the reaction mixture increases its activity by 14-fold. Other divalent metal ions such as Co(2+) and Mn(2+) also stimulated the activity of the enzyme, while Zn(2+), Fe(2+), and Cu(2+) had no effect. Furthermore, both NaCl and KCl enhanced the activity of the enzyme, having maximal effect at 50 and 75 mM, respectively. The enzyme is inhibited by sodium orthovanadate but not by sodium fluoride or okadaic acid. Mutational analysis data suggest that p34 belongs to the group of phosphatases characterized by the sequence motif DXDX(T/V).     

Quercetinase QueD of Streptomyces sp. FLA, a monocupin dioxygenase with a preference for nickel and cobalt

Quercetinase (QueD) of Streptomyces sp. FLA is an enzyme of the monocupin family and catalyzes the 2,4-dioxygenolytic cleavage of the flavonol quercetin. After expression of the queD gene in Escherichia coli, high specific QueD activity was found in crude cell extracts when the growth medium was supplemented with NiCl 2 or CoCl 2, but not when Mn (2+), Fe (2+), Cu (2+), or Zn (2+) was added. The metal occupancy of Ni- and Co-QueD purified from these cells was 相似文献   

Expression of cyclodextrinase gene from Paenibacillus sp. A11 in Escherichia coli and characterization of the purified cyclodextrinase

The expression of the Paenibacillus sp. A11 cyclodextrinase (CDase) gene using the pUC 18 vector in Escherichia coli JM 109 resulted in the formation of an insoluble CDase protein in the cell debris in addition to a soluble CDase protein in the cytoplasm. Unlike the expression in Paenibacillus sp. A11, CDase was primarily observed in cytoplasm. However, by adding 0.5 M sorbitol as an osmolyte, the formation of insoluble CDase was prevented while a three-fold increase in cytoplasmic CDase activity was achieved after a 24 h-induction. The recombinant CDase protein was purified to approximately 14-fold with a 31% recovery to a specific activity of 141 units/mg protein by 40-60% ammonium sulfate precipitation, DEAE-Toyopearl 650 M, and Phenyl Sepharose CL-4B chromatography. It was homogeneous by non-denaturing and SDS-PAGE. The enzyme was a single polypeptide with a molecular weight of 80 kDa, as determined by gel filtration and SDS-PAGE. It showed the highest activity at pH 7.0 and 40 degrees C. The catalytic efficiency (k(cat)/K(m)) values for alpha-, beta-, and gamma- CD were 3.0 x 10(5), 8.8 x 10(5), and 5.5 x 10(5) M(-1) min(-1), respectively. The enzyme hydrolyzed CDs and linear maltooligosaccharides to yield maltose and glucose with less amounts of maltotriose and maltotetraose. The rates of hydrolysis for polysaccharides, soluble starch, and pullulan were very low. The cloned CDase was strongly inactivated by N-bromosuccinimide and diethylpyrocarbonate, but activated by dithiothreitol. A comparison of the biochemical properties of the CDases from Paenibacillus sp. A11 and E. coli transformant (pJK 555) indicates that they were almost identical.     

Kinetics and mechanism of the decomposition of S-nitrosoglutathione by l-ascorbic acid and copper ions in aqueous solution to produce nitric oxide.

S-Nitrosothiols serve as a good source of nitric oxide ((*)NO) mainly due to the ease of cleavage of the S-N bond which consequently produces (*)NO. The reductive decomposition of S-nitrosoglutathione (GSNO) by l-ascorbic acid (vitamin C) yields (*)NO which was monitored both electrochemically (using NO-probe) and spectrophotometrically. The rate of reaction and (*)NO release was found to be pH dependent in a manner which drastically increases with pH demonstrating that the l-ascorbic acid dianion (A(2-)) is by far the most reactive species of l-ascorbic acid (H(2)A). The derived rate expression (measuring the disappearance of the absorption at ca. 336 nm due to GSNO) was established as rate = -d[GSNO](t)/dt = ((k(a)[H(+)](2) + k(b)[H(+)]K(1) + k(c)K(1)K(2))/([H(+)](2) + K(1)[H(+)] + K(1)K(2)))[GSNO](t)[H(2)A](t). k(a), k(b), and k(c) are second-order rate constants via the H(2)A, HA(-), and A(2-) pathways, respectively, while K(1) and K(2) represent the first and second equilibrium dissociation constants of l-ascorbic acid. There is little or no reaction at low pH (below 5.5), where H(2)A is a predominant species, and as a result the rate constant (k(a)) via this route was found to be negligible. At 25 degrees C, k(b) = 5.23 +/- 1.47 x 10(-3) dm(3) mol(-1) s(-1) and k(c) = 1.22 +/- 0.04 x 10(3) dm(3) mol(-1) s(-1), activation parameters DeltaH(double dagger)(b) = 54.4 +/- 4.3 kJ mol(-1), DeltaS(double dagger)(b) = -106 +/- 16 J K(-1) mol(-1), DeltaH(double dagger)(c) = 80.5 +/- 7.5 kJ mol(-1), DeltaS(double dagger)(c) = 84 +/- 7 kJ mol(-1). The experimental rate and activation parameters suggest that this redox process follows an outer-sphere electron transfer mechanism. GSNO is relatively stable in the dark, aqueous medium and even in the presence of trace quantities of Cu(2+). Induced catalytic decomposition of GSNO only becomes significant above ca. 10 microM Cu(2+), but after this it shows linear dependency. To nullify any catalysis by Cu(2+) or any other transition metal ions, EDTA was added to all experimental reactions except those where catalysis by Cu(2+) was studied.     

Functional characterization of purified zinc transporter from renal brush border membrane of rat

Major zinc binding protein purified from renal brush border membrane (BBM) (R. Kumar, R. Prasad, Biochim. Biophys. Acta 1419 (1999) 23) was reconstituted into liposomes and its functional characteristics were investigated. Physical incorporation of the major zinc binding protein into the proteoliposomes was checked by SDS-PAGE, which showed a single band on silver staining. The structural integrity of the proteoliposomes was assessed by phase contrast microscopy, which revealed the proteoliposomes as globular structures and intact boundaries. Further structural integrity/leakiness of the proteoliposomes was checked by monitoring efflux of Zn(2+) from the pre-loaded proteoliposomes in the presence of either 2 mM Ca(2+) or Cd(2+) or Zn(2+). It was observed that even after 2 h of the initiation of efflux, 85-95% of Zn(2+) was retained in the proteoliposomes, thereby indicating that proteoliposomes were not leaky and maintained structural integrity during the uptake study. Zinc uptake into the proteoliposomes followed Michaelis-Menten kinetics with affinity constant (K(m)) of 1.03 mM and maximal velocity (V(max)) of 1333 nmol/mg protein per min. The uptake process followed first-order kinetics with a rate constant (k) of 1. 09x10(-3) s(-1). The specificity of zinc transport system was determined by studying the interaction of divalent cations viz. Ca(2+) and Cd(2+) with the zinc uptake. It was observed that Cd(2+) competitively inhibited the zinc uptake process with inhibitory concentration (K(i)) of 2.9 mM. Kinetic analysis of inhibitory effect of Cd(2+) on zinc uptake revealed an increase in K(m) to 1.74 mM without influencing V(max). Zn(2+) uptake into the proteoliposomes was found to be temperature sensitive and Arrhenius plot showed a breakpoint at 27 degrees C. The apparent energies of activation (E(a)) were found to be 7.09 and 2.74 kcal/mol below and above the breakpoint, respectively. The initial velocity of Zn(2+) uptake increased with the increase in outwardly directed proton gradient ([H](i) greater than [H](o)). The Zn(2+) uptake was inhibited by DCCD, thereby suggesting the involvement of -COOH groups in the translocation of Zn(2+) across the lipid bilayer. The ratio of acidic to basic amino acids (1.26) strongly indicates that it is an acidic protein. The cysteine content in this protein was insignificant, which further corroborates the possibility that the acidic amino acids might be prominent candidates for binding to zinc. The findings of the present study confirms that 40 kDa major zinc binding glycoprotein purified from renal BBM is a zinc transporter involved in the influx of Zn(2+) into the epithelial cells of the renal tubular system.     

Inhibitory kinetics of beta-N-acetyl-D-glucosaminidase from prawn (Litopenaeus vannamei) by zinc ion

Prawn (Litopenaeus vannamei) beta-N-acetyl-D-glucosaminidase (NAGase, EC 3.2.1.52) is involved in the digestion and molting processes. Zinc is one of the most important metals often found in the pollutant. In this article, the effects of Zn(2+) on prawn NAGase activity for the hydrolysis of pNP-NAG have been investigated. The results showed that Zn(2+) could reversibly and noncompetitively inhibit the enzyme activity at appropriate concentrations and its IC(50) value was estimated to be 6.00 +/- 0.25 mM. The inhibition model was set up, and the inhibition kinetics of the enzyme by Zn(2+) has been studied using the kinetic method of the substrate reaction. The inhibition constant was determined to be 11.96 mM and the microscopic rate constants were also determined for inactivation and reactivation. The rate constant of the inactivation (k(+0)) is much larger than that of the reactivation (k(-0)). Therefore, when the Zn(2+) concentration is sufficiently large, the enzyme is completely inactivated. On increasing the concentration of Zn(2+), the fluorescence emission peak and the UV absorbance peak are not position shifted, but the intensity decreased, indicating that the conformation of Zn(2+)-bound inactive NAGase is stable and different from that of native NAGase. We presumed that Zn(2+) made changes in the activity and conformation of prawn NAGase by binding with the histidine or cysteine residues of the enzyme.