Certain metals in three coastal algae from Ras Beirut waters

In July and August of 1977, samples of Halimeda tuna (Ellis & Solander) Lamouroux, Calpomenia sinuosa (Mertens & Roth) Derbes & Solier, and Pterocladia pinnata (Hudson) Papenfuss were collected along the coast of Ras Beirut, Lebanon and analyzed for lead, cadmium, copper, nickel and iron. The metal concentrations were quite similar in all three algae, except for iron, which was markedly higher in C. sinuosa, and lead, which was considerably lower in P. pinnata than in the other two species. These metal levels, particularly of lead, copper, and nickel seem to be rather high and may, in part, be due to untreated domestic sewage, industrial effluent, automobile exhaust, and outdoor incineration.Because little is known about the uptake, retention, use and tolerance of heavy metals by marine algae, more work in this field of study is needed.     

Arsenic Uptake by Lemna minor in Hydroponic System

Arsenic is hazardous and causes several ill effects on human beings. Phytoremediation is the use of aquatic plants for the removal of toxic pollutants from external media. In the present research work, the removal efficiency as well as the arsenic uptake capacity of duckweed Lemna minor has been studied. Arsenic concentration in water samples and plant biomass were determined by AAS. The relative growth factor of Lemna minor was determined. The duckweed had potential to remove as well as uptake arsenic from the aqueous medium. Maximum removal of more than 70% arsenic was achieved at initial concentration of 0.5 mg/l arsenic on 15th day of experimental period of 22 days. Removal percentage was found to decrease with the increase in initial concentration. From BCF value, Lemna minor was found to be a hyperaccumulator of arsenic at initial concentration of 0.5 mg/L, such that accumulation decreased with increase in initial arsenic concentration.     

Investigation of Vetiver Grass Capability in Phytoremediation of Contaminated Soils with Heavy Metals (Pb,Cd, Mn,and Ni)

ABSTRACT

Soil contamination with heavy metals has become a worldwide concern. A sustainable technology to mitigate heavy metal contamination is extremely important. Phytoremediation is a cost-effective method, environmentally friendly, and esthetically pleasing. The aim of this study was to investigate the potential of Vetiver phytoremediation of soils contaminated with heavy metals. This research was conducted as a factorial design with four different heavy metals (lead, cadmium, manganese, and nickel) with three varying levels and also three replications for each treatment. Statistical analysis of data was performed using SPSS19 software and analysis of variance, Duncan and Pearson correlation tests. The results showed that, the highest uptake rate was related to lead metal with 282.45 mg/kg of dry soil and 83.4% uptake percentage. Then, the mean and percentage of adsorption for cadmium, nickel and manganese were 248.3 mg/kg (53.2%), 69.4 mg/kg (65.5%), and 63.29 mg/kg (61%), respectively. Lead was found to be the main component of uptake by Vetiver plant. It was found that the roots of the plant have absorbed more heavy metals than the shoots. And at the roots in total 1089.05 and on average 363.01 mg/kg and at the shoots 901.19 and on average 300.39 mg/kg, the metals used were adsorbed on three levels and four treatments. The results of analysis of variance, Duncan test and Pearson correlation showed that the effect of applied treatments on lead uptake in roots and shoots increased significantly (P ≤ 0.05) with increasing levels of treatments. The biological concentration factor was more than one, and the transfer factor was close to one. Therefore, it can be used as a phytostablization plant. The results showed that Vetiver can be considered as a refining plant due to its vegetative characteristics, cost-effectiveness and high adaptation to environmental conditions.     

Biosorption of heavy metals by Fucus spiralis

The sorption uptake of cadmium, nickel, zinc, copper and lead by marine brown alga Fucus spiralis was investigated in bimetallic, trimetallic and multimetallic solutions. The experimental data fitted very well to Langmuir model. In bimetallic systems, the affinity of biomass for lead and copper increased and the sorption uptake of these metals was not affected by increasing concentrations of cadmium, nickel or zinc. However, in solutions with both metals there was a significant mutual decrease of their sorption levels at high concentrations of the other metal. The sorption uptake of cadmium, nickel and copper was investigated in trimetallic aqueous systems. Based on the kinetic parameter b, the affinity of F. spiralis for copper was considerably higher than for cadmium or nickel: bCd=6.39, bNi=1.82 and bCu=17.89. In all tests, the maximum sorption uptake remained practically constant around 1 mmol/g, indicating that the number of active sites on the biomass was limited. Tests with four and five metals showed that copper was preferentially adsorbed. The differences between the experimental sorption data and those given by the chemical speciation program PHREEQCI were negligible. In general, the software used provided satisfactory estimated data for each metal and hence can be a useful tool to predict or simulate the real process.     

Impact of fluorides on the removal of heavy metals from an electroplating effluent using a flocculent brewer’s yeast strain of Saccharomyces cerevisiae

Abstract

Besides several toxic heavy metals, electroplating effluents can have in solution different cations and anions, which may influence heavy metals removal by the biomass. Among them, fluorides are commonly used in the electroplating industries and thus can be found in the respective wastewaters. In the present work, the effect of the presence of fluorides in the efficiency of chromium(III), copper(II) and nickel(II) removal, from an effluent, by heat-inactivated cells of a brewing flocculent strain of Saccharomyces cerevisiae was evaluated. The presence of fluorides severely decreased (>60%) the removal of chromium(III) by yeast biomass. This effect impaired the effective treatment of the effluent according to the US Environmental Protection Agency and the Portuguese law; conversely, a higher removal of copper(II) and nickel(II) was observed. This behaviour can be understood by metal speciation. In the presence of fluorides, chromium(III) was mainly complexed, becoming unavailable for yeast accumulation; this effect decreased the efficiency of chromium(III) removal. Thus, in the presence of fluorides, less chromium(III) is associated with biomass and consequently more yeast binding sites remain available for the uptake of other metals present in solution. This fact explains the increase of copper(II) and nickel(II) removal in the presence of fluorides.     

DECREASE AND INCREASE PROFILE OF CU,CR AND PB DURING STABLE PHASE OF REMOVAL BY DUCKWEED (LEMNA MINOR L.)

The present work details the decrease-increase profiles of Cu, Cr, and Pb by the aquatic plant Lemna minor. A mixture of these metals were utilized at different concentrations. Removal profiles of each metal was determined with water samples taken every 24 h for a 144 h period after the 48 h mark and was examined with correlation analysis. Removal profiles of Cr and Pb by L. minor  from the mixture were observed to be highly similar with each other (r = 0.943). High proportion of Cr and Pb were removed compared to Cu and removal equations were defined with the aid of regression analysis.     

Long-term changes in heavy metal loadings of Ascophyllum nodosum from the Firth of Clyde,UK

The aim of this work is to describe changes in heavy metal concentrations in Ascophyllum nodosum from 1964 to 1994. Samples were collected from three sites in the Firth of Clyde and analysed for zinc, manganese, iron, copper, lead and nickel. The results were analysed using the multivariate technique Principal Components Analysis (PCA). At the Wemyss Bay site there was a trend towards increasing lead and nickel over the study period, which could not be accounted for by local industrial activity. At the Hunterston site, two groups were well separated by the PCA ordination, based on manganese and zinc concentrations, which corresponded to land reclamation activities in the area. The separation of samples at the Ardneil Bay site correlated well with copper concentration and this corresponded to the termination of industrial effluent with heavy copper loadings. Other changes in industrial effluent were also reflected in the Hunterston and Ardneil Bay site ordinations. The PCA technique highlighted the interplay between metals. The work demonstrated the potential for using multivariate analysis of seaweed metal concentrations in monitoring a posteriori the environmental impact of industrial change.     

Assessment of plant growth attributes,bioaccumulation, enrichment,and translocation of heavy metals in water lettuce (Pistia stratiotes L.) grown in sugar mill effluent

This study was conducted to assess the pollutant uptake capability of water lettuce (Pistia stratiotes L.) in terms of bioaccumulation, enrichment, and translocation of heavy metals grown in sugar mill effluent. Results showed that the maximum fresh weight (328.48 ± 2.04 gm kg^?1), total chlorophyll content (2.13 ± 2.03 mg g^?1 fwt), and relative growth rate, RGR (11.89 gg^?1 d^?1) of P. stratiotes were observed at 75% concentration of the sugar mill effluent after 60 days of phytoremediation experiment. The bioaccumulation factor (B_F) of different heavy metals was greater than 1 with 50% and 75% concentrations of sugar mill effluent and this indicated that P. stratiotes was hyperaccumulator or phytoremediator of these metals. The enrichment factor (E_F < 2 for Cu, Fe, Cr, Pb, Zn, and Mn) and (E_F > 2 for Cd) indicated that P. stratiotes mineral enrichment deficient and it moderately enriched the different heavy metals. Moreover, translocation factor (T_F) was less than 1 which indicated the low mobility of metals in different parts (root and leaves) of P. stratiotes after phytoremediation. Therefore, P. stratiotes can be used for phytotreatment of sugar mill effluent up to 50% to 75% concentrations and considered as hyperaccumulator aquatic plant for different heavy metals and other pollutants from the contaminated effluents.     

Seminal plasma trace metal levels in industrial workers

This study compares the seminal plasma trace metal levels of hospital workers with groups of industrial workers in a petroleum refinery, smelter, and chemical plant. The metals measured were the essential metals (copper, zinc, nickel, cobalt, and manganese) and the toxic metals (lead, cadmium, and aluminum). The group mean±SE metal level for each group (50 subjects per group) was calculated, and the statistical significance of the group mean differences of the industrial groups with the hospital group (control) was determined by the Student’s t-test. The differences observed in the smelter group were increased copper and zinc (p≤0.001) and decreased nickel, cobalt, and manganese (p≤0.001,≤0.01). The refinery group differences were increased copper, zinc, and nickel (p≤0.001) but decreased cobalt and manganese (p≤0.001). The chemical group differences were increased zinc (p≤0.001) and decreased cobalt (p≤0.001). The seminal plasma levels of the toxic metals lead and aluminum were increased in each of the industrial groups (p≤0.001). Concurrent differences were (1) decreased accumulation of nickel, cobalt, and manganese in the smelter group, (2) decreased cobalt and managanese in the refinery group, and (3) only decreased cobalt in the chemical group.     

Metal concentrations in water,sediment and sharptooth catfish Clarias gariepinus from three peri-urban rivers in the upper Manyame catchment,Zimbabwe

Concentrations of zinc, cadmium, chromium, nickel, lead, copper and iron were measured in flowing water, riverbed sediments and tissues of sharptooth catfish Clarias gariepinus from three rivers in the upper Manyame catchment over seven months in 2008–2009. The Manyame and Mukuvisi rivers are severely polluted by industrial and domestic effluent, whilst the Gwebi River is not influenced by urban effluent. Key water quality parameters, including dissolved oxygen and conductivity, clearly showed a pollution gradient in the Mukuvisi and Manyame rivers, but water quality in the Gwebi River was good. Levels of zinc, iron, copper, nickel and lead in fish tissues from the three rivers sampled were unusually high, with zinc and iron concentrations being the highest in all the tissues. This was also positively correlated with the concentrations of these metals in water and sediments. Notable differences existed between the water (zinc and copper) and sediments (iron and zinc) of each river. The relatively high metal concentrations in the Gwebi River, as well as conductivity and dissolved ions, were explained by the geological influence of the Great Dyke in its subcatchment. Metals are bound in the sediment but these can be rapidly mobilised into water if environmental changes occur, therefore efforts to monitor and prevent further water quality deterioration are required. The results of this study may have significant negative implications for aquatic organisms and for human health through fish consumption and therefore risk assessment investigations are imperative.     

Influence of lead,cadmium, and nickel on the growth ofMedicago sativa (L.)

Summary Alfalfa (Medicago sativa L.), cv. Iroquois, was grown in the greenhouse in soils amended with additions of either lead, cadmium, or nickel. Metals, at rates varying from 0–250 ppm, were not uniformly mixed but were placed close to the soil surface so as to simulate surface deposition. In one series of experiments the sulphate salt of each metal and two soils were used. In a second series of experiments the nitrate salts and one soil were used. Neither salt of lead significantly depressed alfalfa yields. Both salts of either cadmium or nickel significantly depressed yields. Additions of all metals to the soil resulted in both increased metal uptake and concentrations in alfalfa tissue, particularly for cadmium and nickel. The highest tissue concentrations of cadmium and nickel were associated with plant stunting and necrosis. However, at rates of 125 ppm and less, substantial increases in cadmium and nickel concentrations were obtained frequently without serious yield reductions. Generally, metal concentrations were greatest in the first harvest following metal application. Concentration and uptake of lead and cadmium were greater when the metal was applied to the soil as nitrate than when applied as the sulphate salt.     

Biosorption with algae: a statistical review

The state of the art in the field of biosorption using algae as biomass is reviewed. The available data of maximum sorption uptake (qmax) and biomass-metal affinity (b) for Cd2 +, Cu2 +, Ni2 +, Pb2 + and Zn2 + were statistically analyzed using 37 different algae (20 brown algae, 9 red algae and 8 green algae). Metal biosorption research with algae has used mainly brown algae in pursuit of treatments, which improve its sorption uptake. The information available in connection with multimetallic systems is very poor. Values of qmax were close to 1 mmol/g for copper and lead and smaller for the other metals. Metal recovery performance was worse for nickel and zinc, but the number of samples for zinc was very small. All the metals except lead present a similar affinity for brown algae. The difference in the behavior of lead may be due to a different uptake mechanism. Brown algae stand out as very good biosorbents of heavy metals. The best performer for metal biosorption is lead.     

The influence of phototrophic benthic biofilms on Cd, Cu, Ni, and Pb transport in permeable sediments

The effect of phototrophic biofilm activity on advective transport of cadmium (Cd), copper (Cu), nickel (Ni), and lead (Pb) in sandy sediments was examined using percolated columns. Cd and Ni in the effluent exhibited clear diel cycles in biofilm-containing columns, with concentrations at the end of dark periods exceeding those during illumination by up to 4.5- and 10-fold for Ni and Cd, respectively. Similar cycles were not observed for Pb or Cu. Breakthrough of the latter metals was greatly retarded and incomplete relative to Cd and Ni, and trends in biofilm treatments did not differ greatly from those in control columns. Inhibition of photosystem II by DCMU (3-(3,4-dichlorophenyl)-1,1-dimethylurea) proved that diel cycles of Cd and Ni were controlled by oxygenic photosynthesis, and microsensor measurements showed that metal cycles closely matched metabolic activity-driven pH variations. The sorption edge pH for the sand/biofilm substrate followed the order Ni > Cd > Cu > Pb, and for Ni and Cd, was within the pH 7?C10 range observed in the biofilm-containing column. Adsorption dynamics over the light periods matched pH increases, but desorption during dark periods was incomplete and slower than the rate of change of pH. Over a diel cycle, desorption was less than adsorption, resulting in net binding of dissolved metals due to the biofilm metabolic activity. Extraction with selective reagents indicated that the adsorbed metals were readily exchangeable, and potentially bioavailable. Thus, phototrophic benthic biofilms can control the transport of some metals across the sand?Cwater interface, and processes in this very thin surficial layer should be considered when evaluating chemical fluxes in permeable sediments.     

Phytoremediation of lead (Pb) and Arsenic (As) by Melastoma malabathricum L. from Contaminated Soil in Separate Exposure

This study was conducted to investigate the uptake of lead (Pb) and arsenic (As) from contaminated soil using Melastoma malabathricum L. species. The cultivated plants were exposed to As and Pb in separate soils for an observation period of 70 days. From the results of the analysis, M. malabathricum accumulated relatively high range of As concentration in its roots, up to a maximum of 2800 mg/kg. The highest accumulation of As in stems and leaves was 570 mg/kg of plant. For Pb treatment, the highest concentration (13,800 mg/kg) was accumulated in the roots of plants. The maximum accumulation in stems was 880 mg/kg while maximum accumulation in leaves was 2,200 mg/kg. Only small amounts of Pb were translocated from roots to above ground plant parts (TF < 1). However, a wider range of TF values (0.01–23) for As treated plants proved that the translocation of As from root to above ground parts was greater. However, the high capacity of roots to take up Pb and As (BF > 1) is indicative this plants is a good bioaccumulator for these metals. Therefore, phytostabilisation is the mechanism at work in M. malabathricum's uptake of Pb, while phytoextraction is the dominant mechanism with As.     

An “ex situ” microbial process for the removal of heavy metals from polluted soil: A case study of Ada rice field,Adani, Enugu State,Nigeria

An “ex situ” microbial method for the removal of heavy metals from soil is described. Elemental sulfur was added to generate the lixiviant in shaker flask experiments in which soil sampled from a polluted agricultural field was treated. The biotic oxidation of sulfur to sulfuric acid resulted in significant drop in pH of the bioleaching liquor from 6.94 to 1.8 after 50 days. In batches operated at very low (10 g/kg) sulfur concentrations, pH changed from 6.94 to 5.45. The 50 g/kg soil sulfur concentration was found to be most beneficial to the solubilization process because more than 95% of metals such as zinc (Zn), cadmium (Cd), and nickel (Ni) were recovered while approximately 67% of manganese (Mn) got solubilized. The least concentration of dissolved metals was lead (Pb) – (25%) and chromium (Cr) – (10%). Sulfate accumulation rose to 47% in samples spiked with 50 g/kg soil of sulfur. At lower sulfur concentrations, the sulfates generated were higher than the amount of sulfur added. The microbial process compared well to the abiotic process involving extraneous addition of sulfuric acid except that very high concentrations of acid had to be used. The treatment of the bioleaching wastewater promoted precipitation of the dissolved metals into insoluble hydroxides making discharge of the effluent into the environment safe. The leached soil recovered sufficiently for agricultural use after quick lime and animal manure was used to improve, stabilize, and restore its physical, chemical, and biological conditions.     

Potential of Spartina maritima in Restored Salt Marshes for Phytoremediation of Metals in a Highly Polluted Estuary

Sedimentary abiotic environment, and concentration and stock of nine metals were analyzed in vegetation and sediments to evaluate the phytoremediation capacity of restored Spartina maritima prairies in the highly polluted Odiel Marshes (SW Iberian Peninsula). Samples were collected in two 10 –m long rows parallel to the tidal line at two sediments depths (0–2 cm and 2–20 cm). Metal concentrations were measured by inductively coupled plasma spectroscopy. Iron, aluminum, copper, and zinc were the most concentrated metals. Every metal, except nickel, showed higher concentration in the root zone than at the sediment surface, with values as high as ca. 70 g Fe kg^–1. The highest metal concentrations in S. maritima tissues were recorded in its roots (maximum for iron in Spartina roots: 4160.2 ± 945.3 mg kg^–1). Concentrations of aluminum and iron in leaves and roots were higher than in superficial sediments. Rhizosediments showed higher concentrations of every metal than plant tissues, except for nickel. Sediment metal stock in the first 20 cm deep was ca. 170.89 t ha^–1. Restored S. maritima prairies, with relative cover of 62 ± 6%, accumulated ca. 22 kg metals ha^–1. Our results show S. maritima to be an useful biotool for phytoremediation projects in European salt marshes.     

Thiobacillus ferrooxidans response to copper and other heavy metals: growth, protein synthesis and protein phosphorylation

Respirometric experiments demonstrated that the oxygen uptake by Thiobacillus ferrooxidans strain LR was not inhibited in the presence of 200 mM copper. Copper-treated and untreated cells from this T. ferrooxidans strain were used in growth experiments in the presence of cadmium, copper, nickel and zinc. Growth in the presence of copper was improved by the copper-treated cells. However, no growth was observed for these cells, within 190 h of culture, when cadmium, nickel and zinc were added to the media. Changes in the total protein synthesis pattern were detected by two-dimensional polyacrylamide gel electrophoresis for T. ferrooxidans LR cells grown in the presence of different heavy metals. Specific proteins were induced by copper (16, 28 and 42 kDa) and cadmium (66 kDa), whereas proteins that had their synthesis repressed were observed for all the heavy metals tested. Protein induction was also observed in the cytosolic and membrane fractions from T. ferrooxidans LR cells grown in the presence of copper. The level of protein phosphorylation was increased in the presence of this metal.     

Application of Heavy Metal Rich Tannery Sludge on Sustainable Growth,Yield and Metal Accumulation by Clarysage (Salvia sclarea L.)

A field experiment was conducted to evaluate the effective utilization of tannery sludge for cultivation of clarysage (Salvia sclarea) at CIMAP research farm, Lucknow, India during the year 2012–2013. Six doses (0, 20, 40, 60, 80, 100 tha^?1) of processed tannery sludge were tested in randomised block design with four replications. Results revealed that maximum shoot, root, dry matter and oil yield were obtained with application of 80 tha^?1of tannery sludge and these were 94, 113 and 61% higher respectively, over control. Accumulation of heavy metals (Cr, Ni, Fe, Pb) were relatively high in shoot portion of the plant than root. Among heavy metals, magnitude of chromium accumulation was higher than nickel, iron and lead in shoot as well as in root. Linalool, linalyl acetate and sclareol content in oil increased by 13,8 and 27% respectively over control, with tannery sludge application at 80 tha^?1. Heavy metals such as chromium, cadmium and lead content reduced in postharvest soil when compared to initial status. Results indicated that clarysage (Salvia sclarea) can be grown in soil amended with 80 tha^?1sludge and this can be a suitable accumulator of heavy metals for phytoremediation of metal polluted soils.     

Influence of soil waterlogging on subsequent plant growth and trace metal content

Summary The uptake of trace metals by two plant species (French bean and maize) has been measured on two soils subjected to various waterlogging regimes. Uptake of both manganese and iron was increased due to soil waterlogging, although reoxidation of the soil affected iron more than manganese. Zinc and copper uptake was influenced by a species factor; French bean (Phaseolus vulgaris) showed preferential uptake of zinc, whereas maize (Zea mays) took up copper preferentially. Uptake of cobalt by both species was increased due to waterlogging, following the pattern of manganese.The abilities of these species to take up trace metals from soil followed the pattern predicted by selective extraction of soil for manganese, iron and cobalt, but not for zinc and copper.     

Phytoextraction of heavy metals by Sesuvium portulacastrum l. a salt marsh halophyte from tannery effluent

The present study investigated the sources for remediation of heavy metals and salts from tannery effluent using salt marsh halophyte Sesuvium portulacastrum. From the results observed, in tannery effluent treated soil from 1 kg dry weight of plant sample, Sesuvium portulacastrum accumulated 49.82 mg Cr, 22.10 mg Cd, 35.10 mg Cu and 70.10 mg Zn and from 1 g dry weight of the plant sample, 246.21 mg Na Cl. Cultivation of Sesuvium portulacastrum significantly reduced the EC, pH and SAR levels in tannery effluent and salt treated soil and correspondingly increased in plant sample after 125 days of cultivation. In conclusion, Sesuvium portulacastrum was an efficient in accumulating heavy metals such as Chromium, Cadmium, Copper and Zinc, sodium and chloride maximum through its leaves when compared to stem and root. The finding of these bioacccumulation studies indicates that Sesuvium portulacastrum could be used for phytoremediation of tannery effluent contaminated field.