Study of the near-neutral pH-sensitivity of chitosan/gelatin hydrogels by turbidimetry and microcantilever deflection

The fundamental properties and pH-sensitivity of chitosan/gelating hydrogels were investigated using spectroscopic and microelectro mechanical (MEMS) measurement approaches. Turbidimetric titration revealed that there were electrostatic attractive interactions between tripolyphosphate (TPP), chitosan, and gelatin in the acidic pH range, depending on their degree of ionization. The pH-sensitive swelling behavior of the hydrogels was investigated by monitoring the deflection of hydrogel-coated microcantilevers, which exhibited a sensitive and repeatable response to solution pH. The deflection of the microcantilever increased as the pH decreased, and the response speed of the system exhibited a nearly linear relationship with pH. The effects of the pH and concentration of TPP solution, as well as the ratio of chitosan to gelatin in gel precursor solutions, on the pH sensitivity of the hydrogels were also investigated. It was found that the swelling of the hydrogel is mainly a result of chain relaxation of chitosan-TPP complexes caused by protonation of free amino groups in chitosan, which depends on the crosslinking density set during the formation of the network. An increase in initial crosslink density induced a decrease in swelling and pH sensitivity. It can be concluded from this study that pH-sensitive chitosan gel properties can be tuned by preparatory conditions and inclusion of gelatin. Furthermore, microcantilevers can be used as a platform for gaining increased understanding of environmentally sensitive polymers.     

Biodegradablescaffolds based on chitosan: Preparation,properties, and use for the cultivation of animal cells

The influence of the conditions of the formation of chitosan hydrogels crosslinked with glutaraldehyde (GA) or genipin (the polysaccharide molecular weight, pH level, and concentration of the chitosan solution) on the gel time and the properties of biopolymer scaffolds for tissue engineering obtained by the freeze-drying of hydrogels was studied. The resulting scaffolds had different structures (morphology, degree of anisotropy, average pore size) and moisture-retaining capacities. The cytotoxicity of biodegradable scaffolds based on chitosan with a low content of genipin and GA was studied for the first time. Using the L929 mouse fibroblasts model line, we demonstrated that scaffolds based on chitosan with a molecular weight of 320 and 190 kDa crosslinked with genipin and GA (0.005 and 0.01 mol/mol of chitosan amino groups) are biocompatible. Using confocal laser microscopy, we demonstrated that the cells are uniformly distributed in all scaffold samples and they successfully grew and proliferated when cultured in vitro for 4 days.     

Inhibition of electron transport and oxidative phosphorylation in plant mitochondria by gladiolic acid and structurally-related aromatic ortho dialdehydes

Gladiolic acid (GA, 4-methoxy-5-methyl-0-phthalaldehyde-3-carboxylic acid), an antifungal aromatic ortho dialdehyde produced by Penicillium gladioli was found to be a potent inhibitor of electron transport and oxidative phosphorylation reactions in sweet potato and mung bean mitochondria. Similar results were also found with the naturally occurring ortho dialdehydes, cyclopaldic acid, quadrilineatin, and flavipin as well as the synthetic dialdehydes, 3-formyl opianic acid and 0-phthalaldehyde. Because of their highly reactive ortho-diformyl grouping, GA and structurally related dialdehydes apparently act as multisite inhibitors affecting electron transport and oxidative phosphorylation (at each coupling site). Gladiolic acid has no uncoupling effect like 2,4-dinitrophenol and does not have the same point of interaction in the energy transfer process as oligomycin. Several "partial" reactions of phosphorylation (Mg+2-DNP-stimulated ATPase; ATP-Pi exchange) were strongly inhibited by the various dialdehydes. Flavipin and quadrilineatin are potent inhibitors (80% at a concentration of 25 microM) of site III phosphorylation. Gladiolic acid and related ortho dialdehydes inactivate the catalytic activity of native cytochrome c in vitro. Lysyl epsilon-NH2 rich cytochrome c may be a major site of GA action in the intact mitochondrion. In view of the high chemical reactivity of the orthodiformyl group, it is suggested that mitochondrial function may be affected by aromatic ortho dialdehydes through a combination of reactions involving cross-linking of amino groups on membrane polypeptides and monofunctional reaction with free amino groups important for enzyme function, including epsilon-NH2 groups on cytochrome c. Cross-linking in mitochondrial membrane systems might affect function by interfering with molecular motion in the operation of the terminal portion of the electron-transport chain. The primary toxicological mode of action of GA and related dialdehydes appears to be due to inhibition of mitochondrial function.     

Swelling behaviour of alginate–chitosan microcapsules prepared by external gelation or internal gelation technology

Swelling behaviour is one of the important properties for microcapsules made by hydrogels, which always affects the diffusion and release of drugs when the microcapsules are applied in drug delivery systems. In this paper, alginate–chitosan microcapsules were prepared by different technologies called external or internal gelation process respectively. With the volume swelling degree (S_w) as an index, the effect of properties of chitosan on the swelling behaviour of both microcapsules was investigated. It was demonstrated that the microcapsules with low molecular weight and high concentration of chitosan gave rise to low S_w. Considering the need of maintaining drug activity and drug loading, neutral pH and short gelation time were favorable. It was also noticed that S_w of internal gelation microcapsules was lower than that of external gelation microcapsules, which was interpreted by the structure analysis of internal or external gelation Ca–alginate beads with the aid of confocal laser scanning microscope.     

Rheological study of genipin cross-linked chitosan hydrogels

This paper reports the rheological behavior of chitosan solutions that have been cross-linked with different amounts of genipin, at body temperature and physiological pH. The effect of the cross-linker loading on the rheological properties of hydrogels has been evaluated. The oscillatory time sweep method was used to monitor the dynamic viscoelastic parameters during in situ (i.e., in the rheometer) gelation experiments, enabling the determination of the gelation time. The stress and frequency sweeps were employed to measure G' of the cured hydrogels. It was found that the solutions of chitosan cross-linked with genipin, under physiological conditions, could form relatively strong elastic gels when compared to those of pure chitosan. Moreover, the gelation time obtained from the crossover of G' and G' was in excellent agreement with the value obtained from the Winter-Chambon criterion. A significant reduction on this parameter was achieved even at low genipin concentrations. This behavior suggests that these formulations are able to be produced in situ and thus constitute promising matrices for cells and bioactive molecule encapsulations.     

Anti-calcification of bovine pericardium for bioprosthetic heart valves after surface modification with hyaluronic acid derivatives

Surface modification of glutaraldehyde fixed bovine pericardium (GFBP) was successfully carried out with hyaluronic acid (HA) derivatives. At first, HA was chemically modified with adipic dihydrazide (ADH) to introduce hydrazide functional group into the carboxyl group of HA backbone. Then, GFBP was surface modified by grafting HA-ADH to the free aldehyde groups on the tissue and the subsequent HA-ADH hydrogel coating. HA-ADH hydrogels could be prepared through selective crosslinking at low pH between hydrazide groups of HA-ADH and crosslinkers containing succinimmidyl moieties with minimized protein denaturation. When HA-ADH hydrogels were prepared at low pH of 4.8 in the presence of erythropoietin (EPO) as a model protein, EPO release was continued up to 85% of total amount of loaded EPO for 4 days. To the contrary, only 30% of EPO was released from HA-ADH hydrogels prepared at pH=7.4, which might be due to the denaturation of EPO during the crosslinking reaction. Because the carboxyl groups on the glucuronic acid residues are recognition sites for HA degradation by hyaluronidase, the HA-ADH hydrogels degraded more slowly than HA hydrogels prepared by the crosslinking reaction of divinyl sulfone with hydroxyl groups of HA. Following a two-week subcutaneous implantation in osteopontin-null mice, clinically significant levels of calcification were observed for the positive controls without any surface modification. However, the calcification of surface modified GFBP with HA-ADH and HA-ADH hydrogels was drastically reduced by more than 85% of the positive controls. The anti-calcification effect of HA surface modification was also confirmed by microscopic analysis of explan ted tissue after staining with Alizarin Red S for calcium, which followed the trend as observed with calcium quantification.     

New aspects of the formation of physical hydrogels of chitosan in a hydroalcoholic medium

New aspects concerning the mechanism of formation of chitosan physical hydrogels without any cross-linking agent were studied. The gelation took place during the evaporation of a hydroalcoholic solution of chitosan. We first demonstrated that it was possible to form a physical hydrogel from a hydrochloride form of chitosan. Chromatographic methods showed that during the gel formation, when the initial concentration is over C, the critical concentration of chain entanglement, the water and acid used for the solubilization of the polymer were both eliminated. This particular situation contributed to decrease the dielectric constant of the medium and the apparent charge density of chitosan chains, thus inducing the formation of a three-dimensional network through hydrophobic interactions and hydrogen bonding. In the gelation process, this step was kinetically determining. The speed of evaporation of water and acid were determined and different initial conditions were compared. Thus, we investigated the influence of: the initial polymer concentration, the nature of the counterion and the alcohol, the temperature and the geometry of the reactor. Our results allowed us to confirm the existence of a second critical initial concentration C, from which the evaporation of water became more difficult. We suggested that C corresponded to a reorganization of the solution involving the presence of gel precursors. Then, a mechanism of formation of physical hydrogels of chitosan in a hydroalcoholic medium could be proposed. For the first time, we demonstrated that it was possible to generate physical hydrogels in the presence of various diols, which size of the carbonated chain appeared as a limiting factor for the gelation process. These physical hydrogels of chitosan are currently used in our laboratory for tissue engineering in the treatment of third degree burns with the possibility to adapt their mechanical properties from the choice of both the acid or the alcohol used.     

Removal of As(V) from water by pectin based active hydrogels following geochemical approach

Fe(II)-loaded pectin based hydrogels were used to remove As(V) from water. The hydrogels were synthesized by crosslinking pectin 'as such' or in the presence of 2-acrylamido-2-methylpropanesulphonic acid and three crosslinkers. The hydrogels crosslinked with 5% glutaraldehyde showed the maximum uptake of both Fe(II) and As(V). The sorption of As(V) was found to be sensitive to pH and temperature changes, as the maximum sorption was observed at 35 degrees C and 7.0-9.2 pH.     

About mechanism of chitosan cross-linking with glutaraldehyde

The regularities of the reaction of aminopolysaccharide chitosan with glutaraldehyde (GA) have been considered. The equilibrium forms of GA in water have been thoroughly studied by NMR spectroscopy. It has been established that at pH 5.6, the exchange of the protons of O=CHCH₂ groups for deuterium occurs, indicating the presence of an anion, a product of the first stage of the aldol reaction; at pH > 7.2, the formation of the products of an aldol reaction and aldol condensation takes place. The kinetics of the reaction between the amino groups of chitosan and GA, the kinetics of gel formation in chitosan solutions in the presence of GA, and the kinetics of changes in the rigidity of gels formed have been studied by UV spectroscopy. IR spectra of cross-linked chitosan have been obtained. It has been shown that chitosan catalyzes the polymerization of GA to form irregular products; in this process, the length of oligomeric chains in modified or cross-linked chitosan and the concentration of conjugated bonds increase with the GA concentration and pH of the reaction medium.     

Synthesis and characterization of hydrogels based on grafted chitosan for the controlled drug release

Temperature and pH-responsive hydrogels based on chitosan grafted with poly acrylic acid (PAAc), poly hydroxy propyl methacrylate (PHPMA), poly (vinyl alcohol) (PVA) and gelatin were prepared for controlled drug delivery. These stimuli-responsive hydrogels were synthesized by gamma irradiation technique. The degree of gelation was over 90% and increased as chitosan, AAc and PVA content increased, while the degree of gelation decrease with the increase of gelatin content. The equilibrium swelling studies of hydrogels prepared in various conditions were carried out in an aqueous solution, and the pH sensitivity in the range of 2–9 was investigated. An increase of swelling degree with an increase in the pH was noticed and showed the highest value at pH 9. Also antibiotic drug Oxttetracycline was loaded into the hydrogels and the release studies were carried out at different pH and temperature. The in vitro release profiles of the drug showed that, the release of the drug increased as the time, temperature and pH increased and reached to maximum after 48 h at pH 9. The prepared hydrogels were characterized by using SEM, FTIR, and DSC.     

Residue selective crosslinking of proteins through photoactivatable or proximity-enabled reactivity

Photo- and chemical crosslinking of proteins have offered various avenues for studying protein structure and protein interactions with biomolecules. Conventional photoactivatable groups generally lack reaction selectivity toward amino acid residues. New photoactivatable groups reacting with selected residues have emerged recently, increasing crosslinking efficiency and facilitating crosslink identification. Traditional chemical crosslinking usually employs highly reactive functional groups, while recent advance has developed latent reactive groups with reactivity triggered by proximity, which reduce spurious crosslinks and improve biocompatibility. The employment of these residue selective chemical functional groups, activated by light or proximity, in small molecule crosslinkers and in genetically encoded unnatural amino acids is summarized. Together with new software development in identifying protein crosslinks, residue selective crosslinking has enhanced the research of elusive protein-protein interactions in vitro, in cell lysate, and in live cells. Residue selective crosslinking is expected to expand to other methods for the investigation of various protein–biomolecule interactions.     

Synthesis of multiresponsive and dynamic chitosan-based hydrogels for controlled release of bioactive molecules

An inexpensive, facile, and environmentally benign method has been developed for the preparation of multiresponsive, dynamic, and self-healing chitosan-based hydrogels. A dibenzaldehyde-terminated telechelic poly(ethylene glycol) (PEG) was synthesized and was allowed to form Schiff base linkages between the aldehyde groups and the amino groups in chitosan. Upon mixing the telechelic PEG with chitosan at 20 °C, hydrogels with solid content of 4-8% by mass were generated rapidly in <60 s. Because of the dynamic equilibrium between the Schiff base linkage and the aldehyde and amine reactants, the hydrogels were found to be self-healable and sensitive to many biochemical-stimuli, such as pH, amino acids, and vitamin B6 derivatives. In addition, chitosan could be digested by enzymes such as papain, leading to the decomposition of the hydrogels. Encapsulation and controlled release of small molecules such as rhodamine B and proteins such as lysozyme have been successfully carried out, demonstrating the potential biomedical applications of these chitosan-based dynamic hydrogels.     

Preparation, characterization and properties of aminoethyl chitin hydrogels

Aminoethyl chitins (AEC) with different amino contents were synthesized from chitin and 2-chlorethylamine hydrochloride, and the AEC hydrogels were prepared by crosslinking with glutaraldehyde. The microstructures, swelling behaviors and antibacterial activities of the hydrogels were investigated. The results of Fourier transform infrared spectroscopy (FTIR), (1)H nuclear magnetic resonance ((1)H NMR) spectrum and scanning electron microscopy (SEM) showed that the hydrogels were prepared by forming the Schiff base from AEC and glutaraldehyde. The aminoethyl chitin hydrogels were sensitive to acidic environment. The swelling ratio changed with the amino content of AEC, declined with the increase of the crosslinking agent concentration and increased with the increase of the AEC concentration. In addition, the antibacterial results of the hydrogels against Staphylococcus aureus (S. aureus) indicated that the hydrogels had good antibacterial activities, and the antibacterial properties were affected by the amino content of AEC and the crosslinking agent concentration.     

IPNs based on chitosan with NVP and NVP/HEMA synthesised through photoinitiator-free photopolymerisation technique for biomedical applications

Biocompatible interpenetration polymeric network (IPN) hydrogels based on chitosan with N-vinylpyrrolidinone (NVP) as well as its copolymer with 2-hydroxymethyl methacrylate (HEMA) were synthesised using the photopolymerisation technique without the inclusion of any photoinitiator or crosslinking agent. These hydrogels were characterised using the Fourier-transform infrared spectroscopy (FTIR) technique. Equilibrium swelling of these hydrogels was performed in Milli-Q water and drug release studies were carried out using theophylline as the model drug. These tests showed that the IPN comprised of chitosan and NVP with a very small amount of N-hydroxymethyl maleimide (HMMI) included exhibited higher swelling abilities and fast drug release rates than the IPN which contained chitosan, NVP and HEMA. Kinetic studies of water diffusion into these hydrogels and drug release revealed that with the exception of the IPN with HEMA incorporated, the other hydrogels did not adhere to the Fickian diffusion model. These hydrogels were tested for their biocompatibility with human epidermal keratinocyte cells (HaCaT). A positive cell growth as evidenced by the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) cell proliferation assay indicated that these hydrogels are non-toxic to human keratinocytes and can be potentially used as biomaterials for biomedical applications.     

Rheometric study of the gelation of chitosan in aqueous solution without cross-linking agent

A new process of formation of chitosan physical hydrogels in aqueous solution, without any organic solvent or cross-linking additive, was studied. The three conditions required for the physical gelation were an initial polymer concentration over C*, a critical value of the balance between hydrophilic and hydrophobic interactions, and a physicochemical perturbation responsible for a bidimensional percolating mechanism. The time necessary to reach the gel point was determined by rheometry, and gelations were compared according to different initial conditions. Thus, we investigated the influence of the polymer concentration and the degree of acetylation (DA) of chitosan on gelation. The number of junctions per unit volume at the gel point varied with the initial polymer concentration, i.e., the initial number of chain entanglements per unit volume or the number of gel precursors. The time to reach the gel point decreased with both higher DAs and concentrations. For a chitosan of DA = 36.7%, a second critical initial concentration close to 1.8% (w/w) was observed. Above this concentration, the decrease of the time to reach the gel point was higher and fewer additional junctions had to be formed to induce gelation. To optimize these physical hydrogels, to be used for cartilage regeneration, their final rheological properties were studied as a function of their degree of acetylation and their polymer concentration. Our results allowed us to define the most appropriate gel for the targeted application corresponding to a final concentration of chitosan in the gel of near 1.5% (w/w) and a DA close to 40%.     

Diepoxide-triggered conformational transition of silk fibroin: formation of hydrogels

Silk fibroin hydrogels with tunable properties could be obtained from aqueous fibroin solutions (4.2 w/v %) in a short period of time. This was achieved by the addition of ethylene glycol diglycidyl ether (EGDE) into the reaction solution. Introduction of EGDE cross-links between the fibroin molecules decreases the mobility of the chains, which triggers the conformational transition from random-coil to β-sheet structure and hence fibroin gelation. Dynamic rheological measurements conducted at 50 °C show the formation of strong to weak hydrogels depending on the pH of the reaction solution. Although EGDE attacks the amino groups of fibroin and forms interstrand cross-links, β-sheets acting as physical cross-links dominate the elasticity of the hydrogels. Mechanical response of low-modulus fibroin hydrogels formed above pH 9.7 is highly nonlinear with strong strain hardening behavior (700%) arising from the alignment of the crystallizable amino acid segments.     

Controlled hydrogel formation of a recombinant spider silk protein

Due to their biocompatibility, biodegradability, and low immunogenicity, recombinant spider silk proteins have a high potential for a variety of applications when processed into morphologies such as films, capsules, beads, or hydrogels. Here, hydrogels made of the engineered and recombinantly produced spider silk protein eADF4(C16) were analyzed in detail. It has previously been shown that eADF4(C16) nanofibrils self-assemble by a mechanism of nucleation-aggregation, providing the basis of silk hydrogels. We focused on establishing a reproducible gelation process by employing different protein concentrations, chemical crosslinking, and functionalization of eADF4(C16) with fluorescein. Fluorescein strongly influenced assembly as well as the properties of the hydrogels, such as pore sizes and mechanical behavior, possibly due to its interference with packing of silk nanofibrils during hydrogel formation.     

Physical gelation of chitosan in the presence of beta-glycerophosphate: the effect of temperature

When adding beta-glycerophosphate (beta-GP), a weak base, to chitosan aqueous solutions, the polymer remains in solution at neutral pH and room temperature, while homogeneous gelation of this system can be triggered upon heating. It is therefore one of the rare true physical chitosan hydrogels. In this study, physicochemical and rheological properties of chitosan solutions in the presence of acetic acid and beta-GP were investigated as a function of temperature in order to gain a better understanding of the gelation mechanisms. The gel structure formed at high temperature was only partially thermoreversible upon cooling to 5 degrees C because of the existence of remaining associations, confirmed by the spontaneous recovery of the gel after breakup at low temperature. Increasing temperature had no effect on the pH values of this system, while conductivity (and calculated ionic strength) increased. Values from the pH measurements were used to estimate the degree of protonation of each species as a function of temperature. The decreasing ratio of -NH3+ in chitosan and -OPO(O-)2 in beta-GP suggested reduced chitosan solubility along with a diminution of ionic interactions such as ionic bridging with increasing temperature. On the other hand, the increased ionic strength as a function of temperature, in the presence of beta-GP, enhanced screening of electrostatic repulsion and increased hydrophobic effect, resulting in favorable conditions for gel formation. Therefore, our study suggests that hydrophobic interactions and reduced solubility are the main driving force for chitosan gelation at high temperature in the presence of beta-GP.     

Microphase Separation and Gelation of Methylcellulose in the Presence of Gallic Acid and NaCl as an <Emphasis Type="Italic">In Situ</Emphasis> Gel-Forming Drug Delivery System

Novel hydrogels of methylcellulose (MC) with gallic acid (GA) and NaCl were developed for an in situ gel-forming delivery system. Plain MC and GA/NaCl/MC were characterized using micro-differential scanning calorimetry (micro-DSC), rheological and turbidity methods. The gelation temperatures of MC were reduced to body temperature with adding GA/NaCl. GA and NaCl caused slightly different effects on the gelation/degelation temperatures during heating/cooling, respectively, based on the different sensitivities of these three techniques. The gelation mechanism was investigated by UV spectrophotometry, and the hydrophobic interaction between the aromatic ring of GA and MC was verified. The NaCl/MC hydrogel had smaller micropores than GA/MC and MC, indicating a greater cross-linked density. Doxycycline (DX) was loaded into the systems and demonstrated a synergistic effect of DX/GA. Both GA and DX exhibited a sustained release. The hydrogel of GA/4NaCl/MC could be potentially used for the in situ delivery of DX for deep wound healing.