Growth and carrageenan quality of <Emphasis Type="Italic">Kappaphycus striatum</Emphasis> var. <Emphasis Type="Italic">sacol</Emphasis> grown at different stocking densities,duration of culture and depth

Kappaphycus striatum var. sacol was grown in two separate studies: (1) at two stocking densities, and (2) at four different depths, each for three different durations of culture (30, 45 and 60 days) in order to determine the growth rate of the seaweed and evaluate the carrageenan content and its molecular weight. The results demonstrated that stocking density, duration of culture and depth significantly (P < 0.01) affected the growth rate, carrageenan content and molecular weight of K. striatum var. sacol. Decreasing growth rate was observed at both stocking densities and at four depths as duration of culture increased. A lower stocking density (500 g m⁻¹line⁻¹) showed a higher growth rate for the shortest durations, i.e. 30 days, as compared to those grown at a higher density. Likewise, decreasing growth rate was observed as depth increased, except at 50 cm after 60 days of culture. A 45-day culture period produced the highest molecular weight at both stocking densities (500 g m⁻¹line⁻¹ = 1,079.5 ± 31.8 kDa, 1,000 g m⁻¹line⁻¹ = 1,167 ± 270.6 kDa). ‘Sacol’ grown for 30 days at 50 cm (1,178 kDa) to 100 cm (1,200 kDa) depth showed the highest values of molecular weight of carrageenan extracted. The results suggested that K. striatum var. sacol is best grown at a stocking density of 500 g m⁻¹line⁻¹, at a depth of 50–100 cm, and for a duration of 30 days in order to provide the highest growth rate, carrageenan content and molecular weight.     

Integrated seaweed cultivation on an abalone farm in South Africa

Land-based abalone aquaculture in South Africa, based on the local species Haliotis midae, started in the early 1990s and has grown rapidly in the last decade, with 13 commercial farms now producing over 850 t per annum. Over 6,000 t per annum of kelp Ecklonia maxima are now harvested for this purpose, and some kelp beds are reaching maximum sustainable limits. Research into seaweed aquaculture as feed (Ulva and some Gracilaria) for abalone started in the late 1990s on the southeast coast (where there are no kelp beds) using abalone waste water. A growing body of evidence suggests that a mixed diet of kelp plus other seaweeds can give growth rates at least as good as compound feed, and can improve abalone quality and reduce parasite loads. A pilot scale Ulva lactuca and abalone integrated recirculation unit using 25% recirculation was designed and built on the south west coast of South Africa using one 12,000-L abalone tank containing 13,200 15 ± 2.5 g abalone, connected to two 3,000-L seaweed tanks containing an initial starting biomass of 10 kg of seaweed, replicated 3 times. In an 18-month period, there were no significant differences in abalone health or growth rates, sediment build up and composition, mobile macro fauna densities and species between the recirculation or the flow-through units. Transfer of oxygen generated by the seaweeds to the abalone tanks was poor, resulting in the recirculated abalone tanks having lower (33%) dissolved oxygen concentrations than a comparable flow-through abalone unit. Seaweed nutrient content and specific growth rates in the units were comparable to seaweeds cultivated in fertilized effluent (SGR = 3.2 ± 3.4%.day⁻¹; Yield = 0.2 ± 0.19 kg.m².day⁻¹). Indications were that at this low recirculation ratio the seaweeds in the units were nutrient limited and that there were no negative effects to the abalone being cultivated in such a recirculation unit at this recirculation ratio.     

Palm oil mill effluent (POME) cultured marine microalgae as supplementary diet for rotifer culture

Malaysia is the world’s leading producer of palm oil products that contribute US$ 7.5 billion in export revenues. Like any other agro-based industries, it generates waste that could be utilized as a source of organic nutrients for microalgae culture. Present investigation delves upon Isochrysis sp. culture in POME modified medium and its utilization as a supplement to Nanochloropsis sp. in rotifer cultures. The culture conditions were optimized using a 1 L photobioreactor (Temp: 23°C, illumination: 180 ∼ 200 μmol photons m⁻²s⁻¹, n = 6) and scaled up to 10 L outdoor system (Temp: 26–29°C, illumination: 50 ∼ 180 μmol photons m⁻²s⁻¹, n = 3). Algal growth rate in photobioreactor (μ = 0.0363 h⁻¹) was 55% higher compared to outdoor culture (μ = 0.0163 h⁻¹), but biomass production was 1.3 times higher in outdoor culture (Outdoor = 91.7 mg m⁻²d⁻¹; Photobioreactor = 69 mg m⁻²d⁻¹). Outdoor culture produced 18% higher lipid; while total fatty acids (FA) was not significantly affected by the change in culture systems as both cultures yield almost similar concentrations of fatty acids per gram of sample (photobioreactor = 119.17 mg g⁻¹; outdoor culture = 104.50 mg g⁻¹); however, outdoor cultured Isochrysis sp. had 26% more polyunsaturated fatty acids (PUFAs). Rotifers cultured in Isochrysis sp./ Nanochloropsis sp. (1:1, v/v) mixture gave similar growth rate as 100% Nanochoropsis sp. culture (μ = 0.40 d⁻¹), but had 45% higher counts of rotifers with eggs (t = 7, maximum). The Isochrysis sp. culture successfully lowered the nitrate (46%) and orthophosphate (83%) during outdoor culture.     

Production of a novel glycolipid biosurfactant,mannosylmannitol lipid,by <Emphasis Type="Italic">Pseudozyma parantarctica</Emphasis> and its interfacial properties

The development of a novel glycolipid biosurfactant was undertaken using the high-level producers of mannosylerythritol lipids (MELs) such as Pseudozyma parantarctica, Pseudozyma antarctica, and Pseudozyma rugulosa. Besides the conventional MELs (MEL-A, MEL-B, and MEL-C), these yeasts produced an unknown glycolipid when they were cultivated in a medium containing 4% (w/v) olive oil and 4% (w/w) mannitol as the carbon source. The unknown glycolipid extracted from the culture medium of P. parantarctica JCM 11752^T displayed the spot with lower mobility than that of known MELs on TLC and provided mainly two peaks identical to mannose and mannitol on high-performance liquid chromatography after acid hydrolysis. Based on structural analysis by ¹H and ¹³C nuclear magnetic resonance, the novel glycolipid was composed of mannose and mannitol as the hydrophilic sugar moiety and was identified as mannosylmannitol lipid (MML). Of the strains tested, P. parantarctica JCM 11752^T gave the best yield of MML (18.2 g/L), which comprised approximately 35% of all glycolipids produced. We further investigated the interfacial properties of the MML, considering the unique hydrophilic structure. The observed critical micelle concentration (CMC) and the surface tension at CMC of the MML were 2.6 × 10⁻⁶ M and 24.2 mN/m, respectively. In addition, on a water-penetration scan, the MML efficiently formed not only the lamella phase (Lα) but also the myelins at a wide range of concentrations, indicating its excellent self-assembling properties and high hydrophilicity. The present glycolipid should thus facilitate the application of biosurfactants as new functional materials.     

Cell growth and nutritive value of the tropical benthic diatom, <Emphasis Type="Italic">Amphora</Emphasis> sp., at varying levels of nutrients and light intensity,and different culture locations

Two series of experiments were conducted to determine suitable growth factors for the mass propagation of the local algal isolate Amphora sp. A higher growth rate of 0.2 doubling (μ) day⁻¹ was attained at a lower photosynthetic photon flux density (PPFD; 11.4 μmol photon m⁻²s⁻¹) compared to cultures exposed to higher levels of PPFD (16.1 μmol photon m⁻²s⁻¹, −0.1 μ day ⁻¹; 31.3 μmol photon m⁻²s⁻¹, 0.0 μ day⁻¹). Cultures located inside the laboratory had a significantly higher cell density (133 × 10⁴ cells cm⁻²) and growth rate (0.3 μ day⁻¹) compared to those located outdoors (100 × 10⁴ cells cm⁻², 0.2 μ day⁻¹). A comparison of nutrient medium across two locations showed that lipid content was significantly higher in cultures enriched with F/2MTM (macronutrients + trace metals) and F/2MV (macronutrients + vitamins). Saturated fatty acids were also present in high concentrations in cultures enriched with F/2M (macronutrients only). Significantly higher amounts of saturated fatty acids were observed in cultures located outdoors (33.1%) compared to those located indoors (26.6%). The protein, carbohydrates and n-6 fatty acid content of Amphora sp. were influenced by the location and enrichment of the cultures. This study has identified growth conditions for mass culture of Amphora sp. and determined biochemical composition under those culture conditions. Presented at the 6th Meeting of the Asian Pacific Society of Applied Phycology, Manila, Philippines.     

Growth and laccase production kinetics of <Emphasis Type="Italic">Trametes versicolor</Emphasis> in a stirred tank reactor

White rot fungi are a promising option to treat recalcitrant organic molecules, such as lignin, polycyclic aromatic hydrocarbons, and textile dyes, because of the lignin-modifying enzymes (LMEs) they secrete. Because knowledge of the kinetic parameters is important to better design and operate bioreactors to cultivate these fungi for degradation and/or to produce LME(s), these parameters were determined using Trametes versicolor ATCC 20869 (ATCC, American Type Culture Collection) in a magnetic stir bar reactor. A complete set of kinetic data has not been previously published for this culture. Higher than previously reported growth rates with high laccase production of up to 1,385 U l⁻¹ occurred during growth without or glucose limitation. The maximum specific growth rate averaged 0.94 ± 0.23 day⁻¹, whereas the maximum specific substrate consumption rates for glucose and ammonium were 3.37 ± 1.16 and 0.15 ± 0.04 day⁻¹, respectively. The maximum specific oxygen consumption rate was 1.63 ± 0.36 day⁻¹.     

The viability to a wall shear stress and propagation of <Emphasis Type="Italic">Bifidobacterium longum</Emphasis> in the intensive membrane bioreactor

Bifidobacterium longum grew at 65 L pilot scale of the membrane bioreactor (MBR), externally fitted with ceramic membrane (0.7 m²). Cell mass at the MBR reached 22.18 g L⁻¹ as dry cell weight in 12 h, which is 8.44 times higher than cell mass attained at the vial culture. The growth rate in the vial culture was μ = 0.385 h⁻ and at the batch culture was μ = 1.13 h⁻ in the exponential period and μ = 0.31 h⁻¹ in the stationary period. In the fed-batch mode was μ = 1.102 h⁻¹ for 6 h with inoculation and declined to μ = 0.456 h⁻¹ with feeding of feed medium. The growth rate at the MBR was μ = 0.134 h⁻¹. The number of viable cells was 6.01 × 10¹² cfu L⁻¹ at the batch culture, but increased to 1.15 × 10¹⁴ cfu L⁻¹ at the MBR culture. The specific growth rate of viable cell number (colony-forming units per liter, per hour) improved by 6.01 times from the batch to the MBR culture. The wall shear stress mainly generated by the pump, and the membrane incorporated into the MBR was controlled during the cultivation at the MBR. The viability of B. longum declined to under 10% in the first 2 weeks of the 4-week stability test (40°C) as B. longum was exposed to over wall shear stress 713 Pa, but the viability improved to 30–40% in wall shear stress of 260 Pa or STR culture. The loss in the cell viability can be saved by managing with wall shear stress during the cultivation at the MBR.     

Enhancement of polysaccharides production in <Emphasis Type="Italic">Ganoderma lucidum</Emphasis> by the addition of ethyl acetate extracts from <Emphasis Type="Italic">Eupolyphaga sinensis</Emphasis> and <Emphasis Type="Italic">Catharsius molossus</Emphasis>

To screen stimulators from Chinese medicinal insects for mycelial growth and polysaccharides production of Ganoderma lucidum, G. lucidum was inoculated into the media with and without supplementation of medicinal insect extracts. The ethyl acetate extract of Eupolyphaga sinensis at 55 mg l⁻¹ lead to significant increase in both biomass and intracellular polysaccharides (IPS) concentration from 8.53 ± 0.41 to 14.16 ± 0.43 and 1.28 ± 0.09 to 2.13 ± 0.11 g l⁻¹, respectively. In addition, the ethyl acetate extract of Catharsius molossus at 55 mg l⁻¹ significantly enhanced extracellular polysaccharides (EPS) production; the EPS yield increased from 350.9 ± 14.1 to 475.1 ± 15.3 mg l⁻¹. There were no new components in the two types of polysaccharides obtained by the addition of the insect extracts.     

Long-term production of soluble human Fas ligand through immobilization of <Emphasis Type="Italic">Dictyostelium discoideum</Emphasis> in a fibrous bed bioreactor

The production of recombinant glycoproteins in Dictyostelium discoideum by conventional cell culture methods was limited by low cell density as well as low growth rate. In this work, cotton towel with a good adsorption capability for D. discoideum cells was used as the immobilization matrix in an external fibrous bed bioreactor (FBB) system. With batch cultures in the FBB, the concentration of immobilized cells in the cotton fiber carrier increased to 1.37 × 10⁸ cells per milliliter after 110-h cultivation, which was about tenfold higher than the maximal cell density in the conventional free-cell culture. Correspondingly, a high concentration of soluble human Fas ligand (hFasL; 173.7 μg l⁻¹) was achieved with a high productivity (23 μg l⁻¹ h⁻¹). The FBB system also maintained a high density of viable cells for hFasL production during repeated-batch cultures, achieving a productivity of 9∼10 μg l⁻¹ h⁻¹ in all three batches studied during 15 days. The repeated-batch culture using immobilized cells of D. discoideum in the FBB system thus provides a good method for long-term and high-level production of hFasL.     

Continuous cultures of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> mt-2 overcome catabolic function loss under real case operating conditions

The long-term performance and stability of Pseudomonas putida mt-2 cultures, a toluene-sensitive strain harboring the genes responsible for toluene biodegradation in the archetypal plasmid pWW0, was investigated in a chemostat bioreactor functioning under real case operating conditions. The process was operated at a dilution rate of 0.1 h⁻¹ under toluene loading rates of 259 ± 23 and 801 ± 78 g m⁻³ h⁻¹ (inlet toluene concentrations of 3.5 and 10.9 g m⁻³, respectively). Despite the deleterious effects of toluene and its degradation intermediates, the phenotype of this sensitive P. putida culture rapidly recovered from a 95% Tol⁻ population at day 4 to approx. 100% Tol⁺ cells from day 13 onward, sustaining elimination capacities of 232 ± 10 g m⁻³ h⁻¹ at 3.5 g Tol m⁻³ and 377 ± 13 g m⁻³ h⁻¹ at 10.9 g Tol m⁻³, which were comparable to those achieved by highly tolerant strains such as P. putida DOT T1E and P. putida F1 under identical experimental conditions. Only one type of Tol⁻ variant, harboring a TOL-like plasmid with a 38.5 kb deletion (containing the upper and meta operons for toluene biodegradation), was identified.     

Growth requirements for production of stable cells of the bioherbicidal bacterium Xanthomonas campestris

Xanthomonas campestris MB245, a specific pathogen of the weedy grass Poa annua (annual bluegrass), is being developed as a bioherbicide to control this pest in turf. Nutritional and environmental factors were evaluated based on their ability to support rapid submerged culture growth and high cell yield. Temperature optima for the growth of X. campestris cells in submerged culture were between 27 and 30°C. At 30°C, optimal nutritional conditions for X. campestris growth supported generation times of 150–175 min and cell yields after 24 h growth of 1–2 × 10¹⁰ cells ml⁻¹. Media containing sucrose or glucose as the carbon source and various organic nitrogen sources supported optimal X. campestris growth and cell yield. The addition of vitamin mixtures to complex and defined media had no significant effect on growth or cell yield. The age of X. campestris cultures had a significant impact on cell survival after freeze drying. Following freeze drying, log phase cell survival (44%) was significantly lower than early and late stationary phase cell survival, 62% and 68%, respectively. Cells harvested in stationary phase, freeze dried and stored under vacuum at 4°C, showed no significant loss in viability after 6 months. Thus, high cell concentrations of the bioherbicide X. campestris can be rapidly produced in submerged culture and stabilized as freeze-dried preparations. Received 14 August 1998/ Accepted in revised form 8 October 1998     

Biofiltering efficiency, uptake and assimilation rates of Ulva clathrata (Roth) J. Agardh (Clorophyceae) cultivated in shrimp aquaculture waste water

The growth, biofiltering efficiency and uptake rates of Ulva clathrata were studied in a series of outdoor tanks, receiving waste water directly from a shrimp (Litopenaeus vannamei) aquaculture pond, under constant aeration and two different water regimes: (1) continuous flow, with 1 volume exchange a day (VE day^-1) and (2) static regime, with 1 VE after 4 days. Water temperature, salinity, pH, dissolved inorganic nitrogen (DIN), phosphate (PO₄), chlorophyll-a (chl-a), total suspended solids (TSS), macroalgal biomass (fresh weight) and tissue nutrient assimilation were monitored over 12 days. Ulva clathrata was highly efficient in removing the main inorganic nutrients from effluent water, stripping 70–82% of the total ammonium nitrogen (TAN) and 50% PO₄ within 15 h. Reductions in control tanks were much lower (Tukey HSD, P < 0.05). After 3 days, the mean uptake rates by the seaweed biomass under continuous flow were 3.09 mg DIN g DW day⁻¹ (383 mg DIN m⁻² day⁻¹) and 0.13 mg PO₄ g DW day⁻¹ (99 mg PO₄ m⁻² day⁻¹), being significantly higher than in the static regime (Tukey HSD, P < 0.05). The chl-a decreased in seaweed tanks, suggesting that U. clathrata inhibited phytoplankton growth. Correlations between the cumulative values of DIN removed from the water and total nitrogen assimilated into the seaweed biomass (r = 0.7 and 0.8, P < 0.05), suggest that nutrient removal by U. clathrata dominated over other processes such as phytoplankton and bacterial assimilation, ammonia volatilization and nutrient precipitation.     

Repeated batch cultivation of the microalga Spirulina platensis

Summary The cultivation of photosynthetic microorganisms such as the microalga Spirulina platensis can provide an alternative source of food. The water in Mangueira Lagoon (Rio Grande do Sul state, southern Brazil) has several required nutrients for the growth of Spirulina and could be added to culture medium to reduce the cost of producing S. platensis. Although little studied, repeated batch cultivation is a very useful technique because it has a better cost–benefit ratio than other cultivation methods. In a series of runs, we studied the influence of cell concentration, renewal rate and strain on the specific growth rate and biomass productivity of S. platensis during repeated batch cultivation, the runs taking place in 2-l Erlenmeyer flasks for 2160 h at 30 °C and a light intensity of 2500 lux under a 12 h photoperiod. The three factors studied had a significant (P < 0.05) effect on the results (specific growth rate and productivity). Using Zarrouk’s medium, the highest specific growth rate (μ_X) was 0.111 day⁻¹ while the biomass productivity (P _X) was 0.0423 g l⁻¹ day⁻¹, while Mangueira Lagoon water supplemented with 10% Zarrouk’s medium gave μ_X = 0.113 day⁻¹ and a productivity P _X = 0.0467 g l⁻¹ day⁻¹. These values were two to three times higher than the results obtained in batch cultivation, indicating that the repeated batch cultivation of S. platensis is attractive and convenient.     

In vitro culture of human chondrocytes (1): A novel enhancement action of ferrous sulfate on the differentiation of human chondrocytes

Chondrogenic differentiation of mesenchymal cells is generally thought to be initiated by the inductive action of specific growth factors and depends on intimate cell-cell interactions. The aim of our investigation was to characterize the influences of basic fibroblast growth factor (bFGF) and ferroussulfate (FeSO₄) on proliferation and differentiation of human articular chondrocytes (HAC). This is the first report of the effects of FeSO₄ on chondrogenesis of HAC. Multiplied chondrocytes of hip and shoulder joints were cultured in chondrocyte growth medium supplemented with bFGF, FeSO₄, or both bFGF + FeSO₄ for4weeks. A 20 μl aliquot of a cell suspension containing2 × 10⁷ cells ml⁻¹ was delivered onto each well of 24-well tissue culture plates. Cells cultured with the growth medium only was used as a control. Alamar blue and alcian blue staining were done to determine the chondrocyte proliferation and differentiation, respectively, after 4 weeks. The samples exposed to bFGF, FeSO₄, and combination of both indicated sufficient cell proliferation similar to the control level. Differentiations of the HAC exposed to bFGF, FeSO₄,and bFGF + FeSO₄ were 1.2-, 2.0-, and 2.2-fold of the control, respectively. Therefore, chondrocyte differentiation was significantly enhanced by the addition of FeSO₄ andbFGF + FeSO₄. The combined effects of bFGF and FeSO₄ were additive, rather than synergistic. These results suggest that treatment with ferrous sulfate alone or in combination with basic fibroblast growth factor etc, is a powerful tool to promote the differentiation of HAC for the clinical application. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influence of cell density and phase variants of bacterial symbionts (Xenorhabdus spp.) on dauer juvenile recovery and development of biocontrol nematodes Steinernema carpocapsae and S. feltiae (Nematoda: Rhabditida)

The rhabditid nematodes Steinernema carpocapsae and Steinernema feltiae are used in biological control of insect pests. Mass production is done in liquid culture media pre-incubated with their bacterial symbionts Xenorhabdus nematophila and Xenorhabdus bovienii, respectively, before nematode dauer juveniles (DJs) are inoculated. As a response to food signals produced by the bacterial symbionts, the DJs exit from the developmentally arrested dauer stage (they recover development) and grow to adults, which produce DJ offspring. Variable DJ recovery after inoculation often causes process failure due to non-synchronous population development and low numbers of adult nematodes. This contribution investigated the influence of the bacterial cell density on DJ recovery and development to adults. At higher density of 10¹⁰ bacterial cells ml⁻¹, a higher percentage of DJ recovery was induced, and adults occurred earlier in both Steinernema spp. than at lower density of 10⁹ and 10⁸ cells ml⁻¹. Xenorhabdus symbionts produce phase variants. Recovery in bacteria-free supernatants was lower than in supernatants containing bacterial cells for both primary and secondary phase Xenorhabdus spp. and lower in secondary than in primary phase supernatants or cell suspensions. In general, recovery was lower for Steinernema feltiae and the time at which 50% of the population had recovered after exposure to the food signal was longer (RT₅₀ = 17.1 h) than for Steinernema carpocapsae (RT₅₀ = 6.6 h). Whereas >90% S. carpocapsae DJs recovered in hemolymph serum of the lepidopteran insect Galleria mellonella, recovery of S. feltiae only reached 31%. Penetration into a host insect prior to exposure to the insect’s food signal did not enhance DJ recovery. Consequences for liquid culture mass production of the nematodes and differences between species of the genera Steinernema and Heterorhabditis are discussed.     

Interactions between environmental variables on growth rate and carrageenan content of Solieria chordalis (Solieriaceae,Rhodophyceae) in culture

Using vegetative propagules (ramuli) of the iota carrageenan producing red seaweed Solieria chordalis, a maximum growth rate of 6.8% d⁻¹ was achieved when cultured at 20 °C and 100 μmol photon m⁻² s⁻¹ in seawater supplemented with 20 μM NO₃-N or 10 μM NO₃-N plus 10 μM NH₄-N. Ramuli grew less well when nitrogen was supplied solely as NH ₄ ⁺ . Maximum carrageenan content was observed at the same temperature, irradiance and salinity as growth, but at lower nitrogen concentrations. These findings are discussed in relation to results obtained from studies on other iota-carrageenan producing carrageenophytes.     

Kinetic models for astaxanthin production by high cell density mixotrophic culture of the microalga Haematococcus pluvialis

High cell density cultivation of Haematococcus pluvialis for astaxanthin production was carried out in batch and fed-batch modes in 3.7-L bioreactors with stepwise increased light intensity control mode. A high cell density of 2.65 g L⁻¹ (batch culture) or 2.74 g L⁻¹ (fed-batch culture) was obtained, and total astaxanthin production in the fed-batch culture (64.36 mg L⁻¹) was about 20.5% higher than in the batch culture (53.43 mg L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, astaxanthin formation, as well as sodium acetate consumption was proposed. Good agreement was found between the model predictions and experimental data. The models demonstrated that the optimal light intensity for mixotrophic growth of H. pluvialis in batch or fed-batch cultures in a 3.7-L bioreactor was 90–360 μmol m⁻² s⁻¹, and that the stepwise increased light intensity mode could be replaced by a constant light intensity mode. Received 24 December 1998/ Accepted in revised form 23 April 1999     

Plant-growth-promoting compounds produced by two agronomically important strains of <Emphasis Type="Italic">Azospirillum brasilense</Emphasis>, and implications for inoculant formulation

We evaluated phytohormone and polyamine biosynthesis, siderophore production, and phosphate solubilization in two strains (Cd and Az39) of Azospirillum brasilense used for inoculant formulation in Argentina during the last 20 years. Siderophore production and phosphate solubilization were evaluated in a chemically defined medium, with negative results. Indole 3-acetic acid (IAA), gibberellic acid (GA₃), and abscisic acid (ABA) production were analyzed by gas chromatography-mass spectrometry. Ethylene, polyamine, and zeatin (Z) biosynthesis were determined by gas chromatography-flame ionization detector and high performance liquid chromatography (HPLC-fluorescence and -UV), respectively. Phytohormones IAA, Z, GA₃, ABA, ethylene, and growth regulators putrescine, spermine, spermidine, and cadaverine (CAD) were found in culture supernatant of both strains. IAA, Z, and GA₃ were found in all two strains; however, their levels were significantly higher (p < 0.01) in Cd (10.8, 2.32, 0.66 μg ml⁻¹). ABA biosynthesis was significantly higher (p < 0.01) in Az39 (0.077 μg ml⁻¹). Ethylene and polyamine CAD were found in all two strains, with highest production in Cd cultured in NFb plus l-methionine (3.94 ng ml⁻¹ h⁻¹) and Az39 cultured in NFb plus l-lysine (36.55 ng ml⁻¹ h⁻¹). This is the first report on the evaluation of important bioactive molecules in strains of A. brasilense as potentially capable of direct plant growth promotion or agronomic yield increase. Az39 and Cd showed differential capability to produce the five major phytohormones and CAD in chemically defined medium. This fact has important technological implications for inoculant formulation as different concentrations of growth regulators are produced by different strains or culture conditions.     

Production and regeneration of protoplasts from <Emphasis Type="Italic">Grateloupia turuturu</Emphasis> Yamada (Rhodophyta)

Protoplasts were isolated enzymatically from the carrageenophyte red alga Grateloupia turuturu (Halymeniales, Rhodophyta) that occurs along the coast of the French Channel in Normandy. Effects of the main factors on the protoplast yield were identified to improve the isolation protocol. The optimal enzyme composition for cell wall digestion and protoplast viability consisted of 2% cellulase Onozuka R-10, 0.5% macerozyme R-10, 2% crude extract from viscera of Haliotis tuberculata, 0.8 M mannitol, 20 mM sodium citrate, 0.3% bovine serum albumin at 25°C, and 4-h incubation period. The protoplasts were approximately 5–15 μm in diameter, liberated mainly from the surface cell layers. Maximum yield was 1.5 × 10⁷ protoplasts g^-1 fresh tissue. The protoplasts underwent initial division after 14 days with a high density level of 1 × 10⁶ cells mL^-1 in culture medium and developed into microthalli of a line of two to six cells.     

Microprojectile bombardment of <Emphasis Type="Italic">Laminaria japonica</Emphasis> gametophytes and rapid propagation of transgenic lines within a bubble-column bioreactor

A human acidic fibroblast growth factor gene, hafgf, was successfully transferred into Laminaria japonica (kelp) gametophytes via microprojectile bombardment using the biolistic PDS-1000/He gene gun. Following phosphinothricin screening, PCR detection and Southern blot analysis, transgenic L. japonica gametophytes were cultivated in an illuminated bubble-column bioreactor to optimize growth conditions. A maximal final dry cell density of 1,695 mg l⁻¹ was obtained in a batch culture having an initial dry cell density of 129.75 mg l⁻¹. This was achieved using an aeration rate of 1.08 l air min⁻¹ l⁻¹ culture in a medium containing 1.5 mM inorganic nitrate and 0.15 mM phosphate. In addition, the relationship between different nitrogen sources and growth of transgenic gametophytes indicated that both urea and sodium nitrate were effective nitrogen sources for cell growth, while ammonium ions inhibited growth of these gametophytes.