A short helix in the C-terminal region of LolA is important for the specific membrane localization of lipoproteins

The structures of a lipoprotein carrier, LolA, and a lipoprotein receptor, LolB, are similar except for an extra C-terminal loop containing a 3(10) helix and beta-strand 12 in LolA. Lipoprotein release was significantly reduced when beta-12 was deleted. Deletion of the 3(10) helix also inhibited the lipoprotein release. Furthermore, lipoproteins were non-specifically localized to membranes when LolA lacked the 3(10) helix. Thus, the membrane localization of lipoproteins with the LolA derivative lacking the 3(10) helix was independent of LolB whereas LolB was essential for the outer membrane localization of lipoproteins with the wild-type LolA.     

Epitope mapping of conformational monoclonal antibodies specific to NhaA Na+/H+ antiporter: structural and functional implications

The recently determined crystal structure of NhaA, the Na ⁺/H ⁺ antiporter of Escherichia coli, showed that the previously constructed series of NhaA-alkaline phosphatase (PhoA) fusions correctly predicted the topology of NhaA's 12 transmembrane segments (TMS), with the C- and N-termini pointing to the cytoplasm. Here, we show that these NhaA-PhoA fusions provide an excellent tool for mapping the epitopes of three NhaA-specific conformational monoclonal antibodies (mAbs), of which two drastically inhibit the antiporter. By identifying which of the NhaA fusions is bound by the respective mAb, the epitopes were localized to small stretches of NhaA. Then precise mapping was conducted by targeted Cys scanning mutagenesis combined with chemical modifications. Most interestingly, the epitopes of the inhibitory mAbs, 5H4 and 2C5, were identified in loop X-XI (cytoplasmic) and loop XI-XII (periplasmic), which are connected by TMS XI on the cytoplasmic and periplasmic sides of the membrane, respectively. The revealed location of the mAbs suggests that mAb binding distorts the unique NhaA TMS IV/XI assembly and thus inhibits the activity of NhaA. The noninhibitory mAb 6F9 binds to the functionally dispensable C-terminus of NhaA.     

Predicted bacteriorhodopsin from Exiguobacterium sibiricum is a functional proton pump

The predicted Exigobacterium sibiricum bacterirhodopsin gene was amplified from an ancient Siberian permafrost sample. The protein bacteriorhodopsin from Exiguobacterium sibiricum (ESR) encoded by this gene was expressed in Escherichia coli membrane. ESR bound all-trans-retinal and displayed an absorbance maximum at 534 nm without dark adaptation. The ESR photocycle is characterized by fast formation of an M intermediate and the presence of a significant amount of an O intermediate. Proteoliposomes with ESR incorporated transport protons in an outward direction leading to medium acidification. Proton uptake at the cytoplasmic surface of these organelles precedes proton release and coincides with M decay/O rise of the ESR.     

Detergents destabilize the cubic phase of monoolein: implications for membrane protein crystallization

The in meso method for membrane protein crystallization uses a lipidic cubic phase as the hosting medium. The cubic phase provides a lipid bilayer into which the protein presumably reconstitutes and from which protein crystals nucleate and grow. The solutions used to spontaneously form the protein-enriched cubic phase often contain significant amounts of detergents that were employed initially to purify and to solubilize the membrane protein. By virtue of their surface activity, detergents have the potential to impact on the phase properties of the in meso system and, by extension, the outcome of the crystallization process. The purpose of this study was to quantify the effects that a popular series of nonionic detergents, the n-alkyl-beta-D-glucopyranosides, have on the phase behavior of hydrated monoolein, the lipid upon which the in meso method is based. Phase identity and phase microstructure were characterized by small-angle x-ray diffraction on samples prepared to mimic in meso crystallization conditions. Measurements were made in the 0-40 degrees C range. Samples prepared in the cooling direction allow for the expression of metastability, a feature of liquid crystalline phases that might be exploited in low-temperature crystallization. The results show that the cubic phase is relatively insensitive to small amounts of alkyl glucosides. However, at higher levels the detergents trigger a transition to the lamellar phase in a temperature- and salt concentration-dependent manner. These effects have important implications for in meso crystallization. A diffraction-based method for assaying detergents is presented.     

Studying subunit-subunit interactions in a bacterial ABC transporterby in vitro assembly

The thermostable arginine ABC transporter of Geobacillus stearothermophilus consists of a solute binding protein, ArtJ; a transmembrane subunit, ArtM; and a nucleotide-binding subunit, ArtP. An ArtM/His₆-ArtP complex was functionally assembled from separately purified subunits as demonstrated by assaying stimulation of its ATPase activity by arginine-loaded ArtJ in proteoliposomes. Studying in vitro assembly with variants carrying mutations in the conserved Q loop and/or the EAA loop of ArtP and ArtM, respectively, confirmed the predicted roles of both motifs in intersubunit signaling and physical interaction, respectively. In vitro assembly is considered a useful tool for investigating assembly defects of ABC transporters caused by mutations.     

Biochemical characterization of an ABC transporter LptBFGC complex required for the outer membrane sorting of lipopolysaccharides

Seven Lpt proteins (A through G) are thought to be involved in lipopolysaccharide transport from the inner to outer membrane of Escherichia coli. LptB belongs to the ATP-binding cassette transporter superfamily. Although the lptB gene lacks neighboring genes encoding membrane subunits, bioinformatic analyses recently indicated that two distantly located consecutive genes, lptF and lptG, could encode membrane subunits. To examine this possibility, LptB was expressed with LptF and LptG. We report here that both LptF and LptG formed a complex with LptB. Furthermore, an inner membrane protein, LptC, which had been implicated in lipopolysaccharide transport, was also included in this complex.

Structured summary

MINT-7137021: lptb (uniprotkb:P0A9V1) physically interacts (MI:0914) with lptc (uniprotkb:P0ADV9), lptg (uniprotkb:P0ADC6) and lptf (uniprotkb:P0AF98) by pull down (MI:0096)MINT-7137160: lptb (uniprotkb:P0A9V1) physically interacts (MI:0914) with lptf (uniprotkb:P0AF98) and lptg (uniprotkb:P0ADC6) by pull down (MI:0096)     

Selecting Optimum Eukaryotic Integral Membrane Proteins for Structure Determination by Rapid Expression and Solubilization Screening

A medium-throughput approach is used to rapidly identify membrane proteins from a eukaryotic organism that are most amenable to expression in amounts and quality adequate to support structure determination. The goal was to expand knowledge of new membrane protein structures based on proteome-wide coverage. In the first phase, membrane proteins from the budding yeast Saccharomyces cerevisiae were selected for homologous expression in S. cerevisiae, a system that can be adapted to expression of membrane proteins from other eukaryotes. We performed medium-scale expression and solubilization tests on 351 rationally selected membrane proteins from S. cerevisiae. These targets are inclusive of all annotated and unannotated membrane protein families within the organism's membrane proteome. Two hundred seventy-two targets were expressed, and of these, 234 solubilized in the detergent n-dodecyl-β-d-maltopyranoside. Furthermore, we report the identity of a subset of targets that were purified to homogeneity to facilitate structure determinations. The extensibility of this approach is demonstrated with the expression of 10 human integral membrane proteins from the solute carrier superfamily. This discovery-oriented pipeline provides an efficient way to select proteins from particular membrane protein classes, families, or organisms that may be more suited to structure analysis than others.     

cis- and trans-Linalool 3,7-Oxides and Methyl Salicylate Glycosides and (Z)-3-Hexenyl β-D-Glucopyranoside as Aroma Precursors from Tea Leaves for Oolong Tea

Two new alcoholic aroma precursors, cis- and trans-linalool 3,7-oxides 6-O-β-D-apiofuranosyl-β-D-glucopyranosides (1 and 2), as well as two already known compounds, (Z)-3-hexenyl β-D-glucopyranoside (3) and methyl salicylate 6-O-β-D-xylopyranosyl-β-D-glucopyranoside (β-primeveroside: 4), and another new monoterpendiol glycoside, 8-hydroxygeranyl β-primeveroside (5) have recently been isolated as aroma precursors in tea leaves (Camellia sinensis var. sinensis cv. Maoxie) ready for oolong tea processing.     

The structure of the antigenic polysaccharide produced by Eubactrium saburreum T15

The antigenic polysaccharide was obtained from the cell wall of Eubacterium saburreum strain T15 by trypsin digestion followed by gel permeation and ion-exchange chromatography. Its structure was determined using acid hydrolysis, methylation analysis, and 1D and 2D NMR spectroscopy. It contained L-threo-pent-2-ulose (Xul), D-fucose (Fuc), and D-glycero-D-galacto-heptose (Hep) in 2:3:3 ratio. Methylation analysis indicated an octasaccharide repeating-unit containing five branches. The 1H and 13C signals in NMR spectra of the sugar residues were assigned by COSY, HOHAHA, and HMQC 2D experiments, and the sequence of sugar residues in the repeating unit was determined by NOESY and HMBC experiments. The polysaccharide also contains two O-acetyl groups in the repeating unit, located on the Hep residue. The repeating structure can be written as: [see text for equation]. This is a novel structure in bacterial cell-wall polysaccharides from Gram-positive bacteria.     

The structure of the carbohydrate backbone of the lipopolysaccharide of Pectinatus frisingensis strain VTT E-79104

The structure of the carbohydrate backbone of the lipopolysaccharide from Pectinatus frisingensis strain VTT E-79104 was analyzed using chemical degradations, NMR spectroscopy, mass spectrometry, and chemical methods. The LPS contains two major structural variants, differing in the presence or absence of an octasaccharide fragment. The largest structure of the carbohydrate backbone of the LPS, that could be deduced from experimental results, consists of 20 monosaccharides arranged in a nonrepetitive sequence: [carbohydrate structure: see text] where R is H or 4-O-Me-alpha-L-Fuc-(1-2)-4-O-Me-beta-Hep-(1-3)-alpha-GlcNAc-(1-2)-beta-Man-(1-3)-beta-ManNAc-(1-4)-alpha-Gal-(1-4)-beta-Hep-(1-3)-beta-GalNAc-(1- where Hep is a residue of D-glycero-D-galacto-heptose; all monosaccharides have the D-configuration except for 4-O-Me-L-Fuc and L-Ara4N. This structure is architecturally similar to the oligosaccharide system reported previously in P. frisingensis VTT E-82164 LPS, but differs from the latter in composition and also in the size of the outer region.     

NAD+-specific D-arabinose dehydrogenase and its contribution to erythroascorbic acid production in Saccharomyces cerevisiae

Erythroascorbic acid (eAsA) is a five-carbon analog of ascorbic acid, and it is synthesized from D-arabinose by D-arabinose dehydrogenase (ARA) and D-arabinono-gamma-lactone oxidase. We found an NAD+-specific ARA activity which is operative under submillimolar level of d-arabinose in the extracts of Saccharomyces cerevisiae. The hypothetical protein encoded by YMR041c showed a significant homology to a l-galactose dehydrogenase which plays in plant ascorbic acid biosynthesis, and we named it as Ara2p. Recombinant Ara2p showed NAD+-specific ARA activity with Km=0.78 mM to d-arabinose, which is 200-fold lower than that for the conventional NADP+-specific ARA, Ara1p. Gene disruptant of ARA2 lost entire NAD+-specific ARA activity and the conspicuous increase in intracellular eAsA by exogenous d-arabinose feeding, while the double knockout mutant of ARA1 and ARA2 still retained measurable amount of eAsA. It demonstrates that Ara2p, not Ara1p, mainly contributes to the production of eAsA from d-arabinose in S. cerevisiae.     

Real time analysis of lipoprotein transfer from LolA to LolB by means of surface plasmon resonance

Lipoproteins of Escherichia coli are sorted to the outer membrane through a pathway composed of five Lol proteins. LolA transports lipoproteins released from the inner membrane by LolCDE to LolB on the outer membrane via the periplasm. Interaction between LolA and LolB was speculated to be strong when LolA binds lipoprotein. However, due to a lack of a sensitive method, the kinetics of this reaction have not been examined in detail. We report here the detection of lipoprotein transfer in real time by means of surface plasmon resonance. The kinetic parameters of lipoprotein transfer were determined with wild-type LolA and a mutant defective in it.

Structured summary

MINT-7259948: mlolB (uniprotkb:P61320) binds (MI:0407) to pal (uniprotkb:P0A912) by surface plasmon resonance (MI:0107)     

Site-directed alkylation of LacY: effect of the proton electrochemical gradient

Previous N-ethylmaleimide-labeling studies show that ligand binding increases the reactivity of single-Cys mutants located predominantly on the periplasmic side of LacY and decreases reactivity of mutants located for the most part of the cytoplasmic side. Thus, sugar binding appears to induce opening of a periplasmic pathway with closing of the cytoplasmic cavity resulting in alternative access of the sugar-binding site to either side of the membrane. Here we describe the use of a fluorescent alkylating reagent that reproduces the previous observations with respect to sugar binding. We then show that generation of an H⁺ electrochemical gradient (Δ_μ¯H+, interior negative) increases the reactivity of single-Cys mutants on the periplasmic side of the sugar-binding site and in the putative hydrophilic pathway. The results suggest that Δ_μ¯H+, like sugar, acts to increase the probability of opening on the periplasmic side of LacY.     

A Novel Intein-Like Autoproteolytic Mechanism in Autotransporter Proteins

Many virulence factors secreted by pathogenic Gram-negative bacteria are found to be members of the autotransporter protein family. These proteins share a common mechanism by which they exit the periplasm, involving the formation of a 12-stranded β-barrel domain in the outer membrane. The role of this barrel in the secretion of the N-terminal passenger domain is controversial, and no model currently explains satisfactorily the entire body of experimental data. After secretion, some autotransporter barrels autoproteolytically cleave away the passenger, and one crystal structure is known for a barrel of this type in the postcleavage state. Hbp is an autotransporter of the self-cleaving type, which cuts the polypeptide between two absolutely conserved asparagine residues buried within the barrel lumen. Mutation of the first asparagine residue to isosteric aspartic acid prevents proteolysis. Here we present the crystal structure of a truncated Hbp mutant carrying the C-terminal residues of the passenger domain attached to the barrel. This model mimics the state of the protein immediately prior to separation of the passenger and barrel domains, and shows the role of residues in the so-called “linker” between the passenger and β domains. This high-resolution membrane protein crystal structure also reveals the sites of many water molecules within the barrel. The cleavage mechanism shows similarities to those of inteins and some viral proteins, but with a novel means of promoting nucleophilic attack.     

Cold temperature-induced modifications to the composition and structure of the lipopolysaccharide of Yersinia pestis

Following a report of variations in the lipopolysaccharide (LPS) structure of Yersinia pestis at mammalian (37 degrees C) and flea (25 degrees C) temperatures, a number of changes to the LPS structure were observed when the bacterium was cultivated at a temperature of winter-hibernating rodents (6 degrees C). In addition to one of the known Y. pestis LPS types, LPS of a new type was isolated from Y. pestis KM218 grown at 6 degrees C. The core of the latter differs in: (i) replacement of terminal galactose with terminal d-glycero-d-manno-heptose; (ii) phosphorylation of terminal oct-2-ulosonic acid with phosphoethanolamine; (iii) a lower content of GlcNAc, and; (iv) the absence of glycine; lipid A differs in the lack of any 4-amino-4-deoxyarabinose and presumably partial (di)oxygenation of a fatty acid(s). The data obtained suggest that cold temperature switches on an alternative mechanism of control of the synthesis of Y. pestis LPS.     

Base catalysed isomerisation of aldoses of the arabino and lyxo series in the presence of aluminate

Base-catalysed isomerisation of aldoses of the arabino and lyxo series in aluminate solution has been investigated. L-Arabinose and D-galactose give L-erythro-2-pentulose (L-ribulose) and D-lyxo-2-hexulose (D-tagatose), respectively, in good yields, whereas lower reactivity is observed for 6-deoxy-D-galactose (D-fucose). From D-lyxose, D-mannose and 6-deoxy-L-mannose (L-rhamnose) are obtained mixtures of ketoses and C-2 epimeric aldoses. Small amounts of the 3-epimers of the ketoses were also formed. 6-Deoxy-L-arabino-2-hexulose (6-deoxy-L-fructose) and 6-deoxy-L-glucose (L-quinovose) were formed in low yields from 6-deoxy-L-mannose and isolated as their O-isopropylidene derivatives. Explanations of the differences in reactivity and course of the reaction have been suggested on the basis of steric effects.     

Recognition of selected monosaccharides by Pseudomonas aeruginosa Lectin II analyzed by molecular dynamics and free energy calculations

In this study, interactions of selected monosaccharides with the Pseudomonas aeruginosa Lectin II (PA-IIL) are analyzed in detail. An interesting feature of the PA-IIL binding is that the monosaccharide is interacting via two calcium ions and the binding is unusually strong for protein-saccharide interaction. We have used Molecular Mechanics Poisson-Boltzmann Surface Area (MM/PBSA) and normal mode analysis to calculate the free energy of binding. The impact of intramolecular hydrogen bond network for the lectin/monosaccharide interaction is also analyzed.     

Tricks of the trade used to accelerate high-resolution structure determination of membrane proteins

The rate at which X-ray structures of membrane proteins are solved is on a par with that of soluble proteins in the late 1970s. There are still many obstacles facing the membrane protein structural community. Recently, there have been several technical achievements in the field that have started to dramatically accelerate structural studies. Here, we summarize these so-called ‘tricks-of-the-trade’ and include case studies of several mammalian transporters.     

The Affinity Grid: a pre-fabricated EM grid for monolayer purification

We have recently developed monolayer purification as a rapid and convenient technique to produce specimens of His-tagged proteins or macromolecular complexes for single-particle electron microscopy (EM) without biochemical purification. Here, we introduce the Affinity Grid, a pre-fabricated EM grid featuring a dried lipid monolayer that contains Ni-NTA lipids (lipids functionalized with a nickel-nitrilotriacetic acid group). The Affinity Grid, which can be stored for several months under ambient conditions, further simplifies and extends the use of monolayer purification. After characterizing the Affinity Grid, we used it to isolate, within minutes, ribosomal complexes from Escherichia coli cell extracts containing His-tagged rpl3, the human homolog of the E. coli 50 S subunit rplC. Ribosomal complexes with or without associated mRNA could be prepared depending on the way the sample was applied to the Affinity Grid . Vitrified Affinity Grid specimens could be used to calculate three-dimensional reconstructions of the 50 S ribosomal subunit as well as the 70 S ribosome and 30 S ribosomal subunit from images of the same sample. We established that Affinity Grids are stable for some time in the presence of glycerol and detergents, which allowed us to isolate His-tagged aquaporin-9 (AQP9) from detergent-solubilized membrane fractions of Sf9 insect cells. The Affinity Grid can thus be used to prepare single-particle EM specimens of soluble complexes and membrane proteins.     

Crystal structures of D-tagatose 3-epimerase from Pseudomonas cichorii and its complexes with D-tagatose and D-fructose

Pseudomonas cichoriiid-tagatose 3-epimerase (P. cichoriid-TE) can efficiently catalyze the epimerization of not only d-tagatose to d-sorbose, but also d-fructose to d-psicose, and is used for the production of d-psicose from d-fructose. The crystal structures of P. cichoriid-TE alone and in complexes with d-tagatose and d-fructose were determined at resolutions of 1.79, 2.28, and 2.06 Å, respectively. A subunit of P. cichoriid-TE adopts a (β/α)₈ barrel structure, and a metal ion (Mn²⁺) found in the active site is coordinated by Glu152, Asp185, His211, and Glu246 at the end of the β-barrel. P. cichoriid-TE forms a stable dimer to give a favorable accessible surface for substrate binding on the front side of the dimer. The simulated omit map indicates that O2 and O3 of d-tagatose and/or d-fructose coordinate Mn²⁺, and that C3-O3 is located between carboxyl groups of Glu152 and Glu246, supporting the previously proposed mechanism of deprotonation/protonation at C3 by two Glu residues. Although the electron density is poor at the 4-, 5-, and 6-positions of the substrates, substrate-enzyme interactions can be deduced from the significant electron density at O6. The O6 possibly interacts with Cys66 via hydrogen bonding, whereas O4 and O5 in d-tagatose and O4 in d-fructose do not undergo hydrogen bonding to the enzyme and are in a hydrophobic environment created by Phe7, Trp15, Trp113, and Phe248. Due to the lack of specific interactions between the enzyme and its substrates at the 4- and 5-positions, P. cichoriid-TE loosely recognizes substrates in this region, allowing it to efficiently catalyze the epimerization of d-tagatose and d-fructose (C4 epimer of d-tagatose) as well. Furthermore, a C3-O3 proton-exchange mechanism for P. cichoriid-TE is suggested by X-ray structural analysis, providing a clear explanation for the regulation of the ionization state of Glu152 and Glu246.