Kinetic analysis of protein modification reactions at equilibrium.

A kinetic analysis is presented of reactions of protein modification, and/or of modification-induced enzyme inactivation, which can formally be described by a single exponential function, or by a summation of two exponential functions, of reaction time plus a constant term. The reaction schemes compatible with the kinetic formalism of these cases are given, and a simple kinetic criterion is described whereby the identification of one of these cases, strong negative protein modification co-operativity, may be carried out. The treatment outlined in this paper is applied to a case from the literature, the inactivation of glyceraldehyde-3-phosphate dehydrogenase by butane-2,3-dione [Asriyants, Benkevich & Nagradova (1983) Biokhimiya (Engl. Transl.) 48, 164-171].     

Chemical modification of muscle protein in diabetes

Levels of glycation (fructose-lysine, FL) and advanced glycoxidation and lipoxidation end-products (AGE/ALEs) were measured in total skeletal (gastrocnemius) muscle and myofibril protein and compared to levels of the same compounds in insoluble skin collagen of control and diabetic rats. Levels of FL in total muscle and myofibril protein were 3-5% the level of FL in skin collagen. The AGE/ALEs, N(epsilon)-(carboxymethyl)lysine (CML) and N(epsilon)-(carboxyethyl)lysine, were also significantly lower in total muscle and myofibril protein, approximately 25% of levels in skin collagen. The newly described sulfhydryl AGE/ALE, S-(carboxymethyl)cysteine (CMC), was also measured in muscle; levels of CMC were comparable to those of CML and increased similarly in response to diabetes. Although FL and AGE/ALEs increased in muscle protein in diabetes, the relative increase was less than that seen in skin collagen. These data indicate that muscle protein is partially protected against the increase in both glycation and AGE/ALE formation in diabetes.     

Synthesis and modification of D7 protein during Xenopus oocyte maturation.

The Xenopus maternal mRNA D7 is translationally repressed during oogenesis, only becoming recruited into polysomes during oocyte maturation, with D7 protein being detectable for the first time prior to germinal vesicle breakdown (GVBD). The synthesis of D7 protein was found to be induced by a variety of maturation-promoting agents including cyclin, c-mos and crude preparations of MPF. D7 protein induced by all these agents is post-translationally modified and exists as a number of variants of differing molecular weight. In contrast to endogenous D7 mRNA, D7 RNA injected into the stage VI oocyte is efficiently translated, resulting in the accumulation of predominantly unmodified D7 polypeptides, which become increasingly modified during oocyte maturation to produce a pattern of polypeptides similar to those derived from endogenous D7 mRNA. Thus, the system that results in the post-translational modification of the D7 protein is itself activated during oocyte maturation. The nature of the protein modification is not known but does not appear to be phosphorylation. The translation of exogenous D7 RNA in the stage VI oocyte does not lead to translational derepression of endogenous D7 mRNA.     

Selective modification of alkyne-linked peptides and proteins by cyclometalated gold(III) (C^N) complex-mediated alkynylation

Alkyne is a useful functionality incorporated in proteins for site-selective bioconjugation reactions. Although effective bioconjugation reactions such as copper(I)-catalyzed and/or copper-free 1,3-dipolar cycloadditions of alkynes and azides are the most common approaches, the development of new alkyne-based bioconjugation reactions is still an ongoing interest in chemical biology. In this work, a new approach has been developed for selective modification of alkyne-linked peptides and proteins through the formation of arylacetylenes by a cross-coupling reaction of 6-membered ring cyclometalated gold(III) (C^N) complexes (HC^N = 2-arylpyridines) with terminal alkynes. Screening of the reaction conditions with a series of cyclometalated gold(III) complexes with phenylacetylene gave an excellent yield (up to 82%) by conducting the reaction in slightly alkaline aqueous conditions. The reaction scope was expanded to various alkynes, including alkyne-linked peptides to achieve up to >99% conversion. Using fluorescent dansyl (1l) and BODIPY (1m)-linked gold(III) complexes, alkyne-linked lysozyme has been selectively modified.     

Kinetics of protein modification reactions: analysis of modification-induced protein unfolding

A mathematical treatment of a two-sited, modification-induced protein unfolding model is presented, and it is shown that the dependence of the concentration of modified protein groups on reaction time is described by a linear, second-order, differential equation with nonzero right hand side. The analytic solution of this equation consists of a summation of exponential functions of reaction time. By assigning arbitrary values to the modification and isomerization rate constants of these equations, simulated cases of protein modification are presented, and the apparent end-point of the reaction is determined graphically. It is found that the apparent end-point of the reaction is, in most cases studied, different from the true value of two groups modified per protein molecule, and is a function of both the modification, and isomerization rate constants of the model. The first derivative of the protein modification reaction, at the start of the reaction, [E]'mod (0), is determined, for the same simulated cases of protein modification, by two different analytical methods. It is found that the [E]'mod(0) value, obtained from graphical and numerical analysis data, is in most cases in good agreement with the value expected from first principles. Finally, the different irreversible enzyme inhibition forms, contingent upon the different kinds of the enzyme inactivation-protein modification relationships of the protein modification model under consideration, are presented and discussed.     

Surface modification of chitosan films. Effects of hydrophobicity on protein adsorption

The surface of chitosan films was modified using acid chloride and acid anhydrides. Chemical composition at the film surface was analyzed by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). ATR-FTIR data verified that the substitution took place at the amino groups of chitosan, thus forming amide linkages, and the modification proceeded to the depth at least 1 microm. Choices of molecules substituted at the amino groups of the glucosamine units did affect the hydrophobicity of the film surface, as indicated by air-water contact angle analysis. The surface became more hydrophobic than that of non-modified film when a stearoyl group (C(17)H(35)CO-) was attached to the films. The reaction of chitosan films with succinic anhydride or phthalic anhydride, however, produced more hydrophilic films. Selected modified films were subjected to protein adsorption study. The amount of protein adsorbed, determined by bicinchoninic acid (BCA) assay, related to the types of attached molecules. The improved surface hydrophobicity affected by the stearoyl groups promoted protein adsorption. In contrast, selective adsorption behavior was observed in the case of the chitosan films modified with anhydride derivatives. Lysozyme adsorption was enhanced by H-bonding and charge attraction with the hydrophilic surface. While the amount of albumin adsorbed was decreased possibly due to negative charges that gave rise to repulsion between the modified surface and albumin. This study has demonstrated that it is conceivable to fine-tune surface properties which influence its response to bio-macromolecules by heterogeneous chemical modification.     

Viscosity scaling and protein dynamics

The rates of molecular motions in the interior of some proteins were found to scale with an inverse power of the external solvent viscosity. The data were explained by a flexible protein structure whose dynamics is partially controlled by the solvent. Reaction dynamics in the presence of structural fluctuations with finite lifetimes lead to a dynamic friction coefficient defined by a generalized Langevin equation and a fluctuation-dissipation theorem. A model for the dynamic friction is derived assuming that the fluctuation spectrum at the reaction site involves two components: solvent-independent diffusion of local structural defects in the protein matrix and global fluctuations coupled to the solvent. The theory is applied to the viscosity dependence of molecular oxygen-binding rates in sperm whale myoglobin.     

Protein sequence analysis using Hewlett-Packard biphasic sequencing cartridges in an applied biosystems 473A protein sequencer

Protein sequence analysis using an adsorptive biphasic sequencing cartridge, a set of two coupled columns introduced by Hewlett-Packard for protein sequencing by Edman degradation, in an Applied Biosystems 473A protein sequencer has been demonstrated. Samples containing salts, detergents, excipients, etc. (e.g., formulated protein drugs) can be easily analyzed using the ABI sequencer. Simple modifications to the ABI sequencer to accommodate the cartridge extend its utility in the analysis of difficult samples. The ABI sequencer solvents and reagents were compatible with the HP cartridge for sequencing. Sequence information up to ten residues can be easily generated by this nonoptimized procedure, and it is sufficient for identifying proteins by database search and for preparing a DNA probe for cloning novel proteins.     

Monitoring protein modification with allosteric ribozymes

An allosteric ribozyme is an RNA-based enzyme (ribozyme) whose catalytic activity is modulated by molecular recognition of a protein. The direct coupling of a detectable catalytic event to molecular recognition by an allosteric ribozyme enables simple assays for quantitative protein detection. Most significantly, the mode of development and molecular recognition characteristics of allosteric ribozymes are fundamentally different from antibodies, providing them with functional characteristics that complement those of antibodies. Allosteric ribozymes can be developed using native proteins and, therefore, are often sensitive to protein conformation. In contrast, antibodies tend to recognize a series of adjacent amino acids as a consequence of antigen presentation and typically are not sensitive to protein conformation. Unlike antibody development, the development of allosteric ribozymes is a completely in vitro process that allows the specificity of an allosteric ribozyme to be tightly controlled. These significant differences from antibodies allow the pre-programmed development of conformation-state-specific protein detection reagents that can be used to investigate the activation-state of signal transduction components.     

5,5'-Dithio-bis(2-nitrobenzoic acid) modification of cysteine improves the crystal quality of human chloride intracellular channel protein 2

Structural studies of human chloride intracellular channel protein 2 (CLIC2) had been hampered by the problem of generating suitable crystals primarily due to the protein containing exposed cysteines. Several chemical reagents were used to react with the cysteines on CLIC2 in order to modify the redox state of the protein. We have obtained high quality crystals that diffracted to better than 2.5 Å at a home X-ray source by treating the protein with 5,5′-dithio-bis(2-nitrobenzoic acid) (DTNB). After solving the crystal structure of CLIC2, we found that the DTNB had reacted with the Cys¹¹⁴, and made CLIC2 in a homogenous oxidized state. This study demonstrated that the DTNB modification drastically improved the crystallization of CLIC2, and it implied that this method may be useful for other proteins containing exposed cysteines in general.     

Characterization of Escherichia coli 50S ribosomal protein L31

The published C-terminal sequence of Escherichia coli 50S ribosomal protein L31, ellipsisRFNK (Brosius, J. (1978) Biochemistry 17, 501-508), differs from that predicted by the gene sequence, ellipsisRFNKRFNIPGSK (GenBank accession no. X78541). This discrepancy might be due to post-translational processing of the protein. To examine this possibility, we have isolated L31 from E. coli strain MRE600 and sequenced the C-terminal tryptic peptide. We find the sequence to be FBIPGSK. Size comparisons of L31 from several E. coli strains demonstrate that all are identical in size to the protein isolated from MRE600 and larger than the previously described protein, indicating that ellipsisRFNKRFNIPGSK represents the true C-terminus of L31. In addition, we show that the failure to identify L31 in many ribosome preparations is probably due to the protein's loose association with the ribosome and its ability to form various intramolecular disulfide bonds, leading to L31 forms with distinct mobilities in gels.     

Kinetic implications of structural modification in protein turnover

It is thought that an important function of protein turnover is to purge the cell of damaged, displaced or unwanted polypeptide molecules. A model combining kinetic equations for synthesis, degradation and alteration is employed to evaluate this proposed role for protein turnover. It is demonstrated that the degradative system need not be aimed exclusively at altered protein molecules for turnover to be capable of controlling the size both of the total population and of the altered subpopulation. These conclusions are relevant to the part played by turnover in metabolic homeostasis, adaptation and catastrophe, and for the notion of control of protein turnover through specific "tagging" of molecules destined for breakdown.     

Ratiometric Raman spectroscopy for quantification of protein oxidative damage

A novel ratiometric Raman spectroscopic (RMRS) method has been developed for quantitative determination of protein carbonyl levels. Oxidized bovine serum albumin (BSA) and oxidized lysozyme were used as model proteins to demonstrate this method. The technique involves conjugation of protein carbonyls with dinitrophenyl hydrazine (DNPH), followed by drop coating deposition Raman spectral acquisition (DCDR). The RMRS method is easy to implement because it requires only one conjugation reaction, uses a single spectral acquisition, and does not require sample calibration. Characteristic peaks from both protein and DNPH moieties are obtained in a single spectral acquisition, allowing the protein carbonyl level to be calculated from the peak intensity ratio. Detection sensitivity for the RMRS method is approximately 0.33 pmol carbonyl per measurement. Fluorescence and/or immunoassay-based techniques only detect a signal from the labeling molecule and, thus, yield no structural or quantitative information for the modified protein, whereas the RMRS technique allows protein identification and protein carbonyl quantification in a single experiment.     

Nitric oxide and cell signaling; modulation of redox tone and protein modification

Summary. Reactive oxygen species (ROS) and reactive nitrogen species (RNS) have an impact on many cellular processes, often serving as signal transducers in both physiological and pathological situations. These small molecules can act as ligands for receptors as is the case for nitric oxide and guanylate cyclase. However, they can also modify proteins, changing their function and establishing a baseline for other signals in a process that we have termed redox tone. In this review, we discuss the different mechanisms of redox cell signaling, and give specific examples of RNS participation in cell signaling via classical and redox tone pathways.     

Kinetic analysis of nanoparticle‐protein interactions using a plasmon waveguide resonance

A plasmon waveguide resonance (PWR) sensor is proposed for studying the interaction between gold nanoparticles and proteins. The ability of the PWR sensor to operate in both TM and TE Polarizations, i.e. its polarization diversity, facilitates the simultaneous spectroscopy of the nanoparticles surface reactions using both polarizations. The response of each polarization to streptavidin‐biotin binding at the surface of gold nanoparticles is investigated in real time. Finally, using the principles of multimode spectroscopy, the nanoparticle's surface reactions are decoupled from the bulk solution refractive index variations.

Schematic diagram of the NP‐modified PWR sensor     

Inhibitory effects of phenylpropanoid metabolites on copper-induced protein oxidative modification of mice brain homogenate, in vitro

We present the results of an in vitro investigation of the inhibitory effects of phenylpropanoid metabolites on copper-induced protein oxidative modification of mice brain homogenate. The effects of caffeic acid, 3-(3, 4-dihydroxyphenyl)-l-alanine, esculetin, ferulic acid, and scopoletin were stronger than that of mannitol as a free-radical scavenger, whereas the effects of other phenylpropanoid metabolites, cinnamic acid, coniferyl alcohol, p-coumaric acid, coumarin, phenylalanine, tyrosine, and umbelliferone, were weak. These results demonstrated that phenolic carboxylic acids with 3,4-dihydroxy or 4-hydroxy-3-methoxy substituents and benzo-α-pyrons with 6,7-dihydroxy or 7-hydroxy-6-methoxy substituents in phenylpropanoid metabolites inhibit metal-induced protein oxidative modification of the brain.     

Trimming down a protein structure to its bare foldons: spatial organization of the cooperative unit

Folding of the ribosomal protein S6 is a malleable process controlled by two competing, and partly overlapping, folding nuclei. Together, these nuclei extend over most of the S6 structure, except the edge strand β2, which is consistently missing in the folding transition states; despite being part of the S6 four-stranded sheet, β2 seems not to be part of the cooperative unit of the protein. The question is then whether β2 can be removed from the S6 structure without compromising folding cooperativity or native state integrity. To investigate this, we constructed a truncated variant of S6 lacking β2, reducing the size of the protein from 96 to 76 residues (S6(Δβ2)). The new S6 variant expresses well in Escherichia coli and has a well dispersed heteronuclear single quantum correlation spectrum and a perfectly wild-type-like crystal structure, but with a smaller three-stranded β-sheet. Moreover, S6(Δβ2) displays an archetypical v-shaped chevron plot with decreased slope of the unfolding limb, as expected from a protein with maintained folding cooperativity and reduced size. The results support the notion that foldons, as defined by the structural distribution of the folding nuclei, represent a property-based level of hierarchy in the build-up of larger protein structures and suggest that the role of β2 in S6 is mainly in intermolecular binding, consistent with the position of this strand in the ribosomal assembly.     

On the analysis of protein self-association by sedimentation velocity analytical ultracentrifugation

Analytical ultracentrifugation is one of the classical techniques for the study of protein interactions and protein self-association. Recent instrumental and computational developments have significantly enhanced this methodology. In this paper, new tools for the analysis of protein self-association by sedimentation velocity are developed, their statistical properties are examined, and considerations for optimal experimental design are discussed. A traditional strategy is the analysis of the isotherm of weight-average sedimentation coefficients s(w) as a function of protein concentration. From theoretical considerations, it is shown that integration of any differential sedimentation coefficient distribution c(s), ls-g(*)(s), or g(s(*)) can give a thermodynamically well-defined isotherm, as long as it provides a good model for the sedimentation profiles. To test this condition for the g(s(*)) distribution, a back-transform into the original data space is proposed. Deconvoluting diffusion in the sedimentation coefficient distribution c(s) can be advantageous to identify species that do not participate in the association. Because of the large number of scans that can be analyzed in the c(s) approach, its s(w) values are very precise and allow extension of the isotherm to very low concentrations. For all differential sedimentation coefficients, corrections are derived for the slowing of the sedimentation boundaries caused by radial dilution. As an alternative to the interpretation of the isotherm of the weight-average s value, direct global modeling of several sedimentation experiments with Lamm equation solutions was studied. For this purpose, a new software SEDPHAT is introduced, allowing the global analysis of several sedimentation velocity and equilibrium experiments. In this approach, information from the shape of the sedimentation profiles is exploited, which permits the identification of the association scheme and requires fewer experiments to precisely characterize the association. Further, under suitable conditions, fractions of incompetent material that are not part of the reversible equilibrium can be detected.