Genetic mapping and developmental timing of transmission ratio distortion in a mouse interspecific backcross

Background

Sheep carcasses with yellow fat are sporadically observed at Norwegian slaughter houses. This phenomenon is known to be inherited as a recessive trait, and is caused by accumulation of carotenoids in adipose tissue. Two enzymes are known to be important in carotenoid degradation in mammals, and are therefore potential candidate genes for this trait. These are beta-carotene 15,15'-monooxygenase 1 (BCMO1) and the beta-carotene oxygenase 2 (BCO2).

Results

In the present study the coding region of the BCMO1 and the BCO2 gene were sequenced in yellow fat individuals and compared to the corresponding sequences from control animals with white fat. In the yellow fat individuals a nonsense mutation was found in BCO2 nucleotide position 196 (c.196C>T), introducing a stop codon in amino acid position 66. The full length protein consists of 575 amino acids. In spite of a very low frequency of this mutation in the Norwegian AI-ram population, 16 out of 18 yellow fat lambs were found to be homozygous for this mutation.

Conclusion

In the present study a nonsense mutation (c.196C>T) in the beta-carotene oxygenase 2 (BCO2) gene is found to strongly associate with the yellow fat phenotype in sheep. The existence of individuals lacking this mutation, but still demonstrating yellow fat, suggests that additional mutations may cause a similar phenotype in this population. The results demonstrate a quantitatively important role for BCO2 in carotenoid degradation, which might indicate a broad enzyme specificity for carotenoids. Animals homozygous for the mutation are not reported to suffer from any negative health or development traits, pointing towards a minor role of BCO2 in vitamin A formation. Genotyping AI rams for c.196C>T can now be actively used in selection against the yellow fat trait.     

An interspecific backcross linkage map of mouse chromosome 8

We have established a 67-cM molecular genetic linkage map of mouse chromosome 8 by interspecific backcross analysis. Genes that were mapped in this study include Act-6, Aprt, Aprt-ps1, Emv-2, Es-N, Hp, Insr, Mt-1, Plat, Psx-8, Ucp, and Zfp-4. New regions of homology were established between mouse chromosome 8 and human chromosomes 8 and 19. A conserved linkage group was identified between mouse chromosome 8 and human chromosome 16. The map will be useful for establishing linkage of other markers to mouse chromosome 8.     

Sex determination using the polymerase chain reaction

A practical class experiment on the PCR is described which has been used over several years as part of an undergraduate biochemistry and molecular biology course for science students. A major aim is to provide experience in the use of the polymerase chain reaction (PCR) and its interpretation. Students are given small coded DNA samples and use the PCR reaction to determine whether the sample is from a male or a female.     

Applications of polymerase chain reaction methods in genome mapping.

Important new polymerase chain reaction-based techniques have been developed to assist in genome analysis. Applications range from genetic and physical mapping of DNA to sequence analysis. The polymerase chain reaction has played a significant role in increasing the feasibility of many aspects of genome analysis and positional cloning.     

Maps from two interspecific backcross DNA panels available as a community genetic mapping resource

We established two mouse interspecific backcross DNA panels, one containing 94 N2 animals from the cross (C57BL/6J × Mus spretus)F₁ × C57BL/6J, and another from 94 N2 animals from the reciprocal backcross (C57BL/6J × SPRET/Ei)F₁ × SPRET/Ei. We prepared large quantities of DNA from most tissues of each animal to create a community resource of interspecific backcross DNA for use by laboratories interested in mapping loci in the mouse. Initial characterization of the genetic maps of both panels has been completed. We used MIT SSLP markers, proviral loci, and several other sequence-defined genes to anchor our maps to other published maps. The BSB panel map (from the backcross to C57BL/6J) contains 215 loci and is anchored by 45 SSLP and 32 gene sequence loci. The BSS panel map (from the backcross to SPRET/Ei) contains 451 loci and is anchored by 49 SSLP loci, 43 proviral loci, and 60 gene sequence loci. To obtain a high density of markers, we used motif-primed PCR to fingerprint the panel DNAs. We constructed two maps, each representing one of the two panels. All new loci can be located with a high degree of certainty on the maps at current marker density. Segregation patterns in these data reveal several examples of transmission ratio distortion and permit analysis of the distribution of crossovers on individual chromosomes.     

Automated polymerase chain reaction product sample preparation for capillary electrophoresis analysis

The analysis of crude polymerase chain reaction (PCR) products by capillary electrophoresis (CE) is often compromised due to the presence of a high concentration of salt. Salt interferes with the electrokinetic injection and induces localized heating within the column; hence, PCR products must be desalted or cleaned-up prior to CE analysis. A variety of commercial clean-up systems are available that have been traditionally used to prepare PCR products for cloning, sequencing and digestion with restriction enzymes. These systems were tested for their effectiveness in preparing PCR products for CE analysis and were evaluated based on CE resolution, salt removal, DNA recovery, processing time and cost. One particularly effective clean-up system, membrane dialysis, was automated using a robotic workstation.     

Mapping of mouse intracisternal A-particle proviral markers in an interspecific backcross

We present a linkage map of intracisternal A-particle (IAP) proviral loci. The IAP family consists of 2000 endogenous proviral elements that are widely dispersed in the mouse genome. The map was constructed by using an interspecific backcross and markers defined by oligonucleotide probes specific for subclasses of expressed IAP elements. In genomic DNA from C57BL/6J mouse, these probes each detected from 12 to 44 HindIII restriction fragments that represent junctions between proviral and 5-flanking DNA. The fragments have characteristic strain distribution patterns (SDPs) that are particularly polymorphic in the DNAs of C57BL/6J and Mus spretus mice used for the backcross. IAP loci were placed on the map by comparison of their distribution patterns with those of known genetic markers in the backcross. The map includes 51 IAP loci that have not been previously mapped and 23 IAP proviruses that had been previously mapped in recombinant inbred (RI) strains. Comparable map positions were obtained with the IAP markers in the interspecific backcross and the RI strains. The mapped IAP loci were widely dispersed on the X Chromosome (Chr) and all of the autosomes except Chrs 9 and 19, providing useful genetic markers for linkage studies.     

Sequence analysis and molecular detection of mouse hepatitis virus using the polymerase chain reaction.

Sequence analysis of the nucleocapsid protein genes of five strains of mouse hepatitis virus (MHV) disclosed that the 3' region of the nucleocapsid protein gene contains highly conserved sequences unique to MHV. We designed a pair of primers to amplify cDNA from such sequences of MHV by using the polymerase chain reaction (PCR). Six isolates of wild-type MHV, as well as prototype viruses, were amplified successfully and detected in ethidium bromide-stained agarose gels. The sequence identity of PCR products was readily verified by confirming target size and a MflI site within the target. The sensitivity of our PCR assay was estimated to be sufficient to detect a single cell infected with MHV. This new approach may permit more sensitive and rapid detection of MHV in biologic materials than current methods such as virus isolation, the infant mouse bioassay, and the mouse antibody production test.     

The polymerase chain reaction

This essay on the polymerase chain reaction is one of a series developed as part of FASEB's efforts to educate the general public, and the legislators whom it elects, about the benefits of fundamental biomedical research-particularly how investment in such research leads to scientific progress, improved health, and economic well-being.     

The polymerase chain reaction

The polymerase chain reaction (PCR) is a powerful new method for 'in vitro cloning'. It can selectively amplify a single molecule of template DNA several millionfold in a few hours and has made possible new approaches to problems in molecular genetics, evolutionary biology, and development.     

Gene walking using sequential hybrid primer polymerase chain reaction

We developed a simple and robust method for removing nonspecific amplification produced during gene walking with a gene-specific primer and a degenerate primer. The primary walking polymerase chain reaction (PCR) was followed by two or three PCR rounds, each incorporating a low concentration of a reverse hybrid primer, where the 3′ end was bound to a target sequence generated in the preceding PCR round and the 5′ end was a new sequence that generated a target sequence for the next PCR round. The low concentration of the hybrid primer and the extent of amplicon stem-loop formation inhibited nonspecific amplification and enabled successful walking along three genes.     

Ultra-rapid flow-through polymerase chain reaction microfluidics using vapor pressure

A novel flow-through polymerase chain reaction (PCR) microfluidic system using vapor pressure was developed that can achieve ultra-rapid, small-volume DNA amplification on a chip. The 40-cycle amplification can be completed in as little as 120 s, making this device the fastest PCR system in the world. The chip device is made of a pressure-sensitive polyolefin (PSP) film and cyclo-olefin polymer (COP) substrate which was processed by cutting-work to fabricate the microchannel. The enclosed structure of the microchannel was fabricated solely by weighing the PSP film on the COP substrate, resulting in superior practical application. The vapor pressure in the denaturation zone of the destabilizing flow source was applied to the flow force, and ultra-rapid, efficient amplification was accomplished with a minimal amount of PCR reagents for detection. The flowing rhythm created by vapor pressure minimized the residual PCR products, leading to highly efficient amplification. For field test analysis, airborne dust was collected from a public place and tested for the presence of anthrax. The PCR chip had sufficient sensitivity for anthrax identification. The fastest time from aerosol sampling to detection was theoretically estimated as 8 min.     

Identification of Rhodococcus equi using the polymerase chain reaction

K.S. BELL, J.C. PHILP, N. CHRISTOFI AND D.W.J. AW. 1996. Two regions in the gene coding for 16S rRNA in Rhodococcus equi were selected as species-specific primer sequences for the polymerase chain reaction (PCR). PCR using these primers was tested against 10 strains of R. equi (including the type strain) and gave positive results for all but was negative for all other tested species of Rhodococcus ; representatives of the most closely related genera and a number of other bacterial species. This method could therefore be used to identify this species which can infect the lungs or other organs of horses, pigs, humans and other animals.     

Human DNA quantitation using Alu element-based polymerase chain reaction

Human forensic casework requires sensitive quantitation of human nuclear DNA from complex sources. Widely used commercially available systems detect both nonhuman and human primate DNA, often require special equipment, and have a detection limit of approximately 0.1ng. Multicopy Alu elements include recently integrated subfamilies that are present in the human genome but are largely absent from nonhuman primates. Here, we present two Alu element-based alternative methods for the rapid identification and quantitation of human DNA, inter-Alu PCR and intra-Alu PCR. Using SYBR green-based detection, the effective minimum threshold level for human DNA quantitation was 0.01ng using inter-Alu- and 0.001ng using intra-Alu-based PCR. Background cross-amplification with nonhuman DNA templates was detected at low levels using inter-Alu-based PCR, but was negligible using intra-Alu-based PCR. These Alu-based methods have several advantages over currently available systems. First, the assays are PCR based and no additional unique equipment is required. Second, the high copy number of subfamily-specific Alu repeats in the human genome makes these assays human specific within a very sensitive linear range. The introduction of these assays to forensic laboratories will undoubtedly increase the sensitivity and specificity of human DNA detection and quantitation from complex sources.     

Diagnosis of haemophilia B using the polymerase chain reaction

The polymerase chain reaction (PCR) was used to amplify specific DNA sequences within the factor IX gene of haemophilia B patients and their relatives. Three of the amplified fragments contain polymorphic sites, which can be used as markers in segregation analyses. These restriction fragment length polymorphisms (RFLPs) were until recently detected by Southern blotting after digestion with the restriction enzymes Taq I, Dde I and Xmn I. All three RFLP's are located in introns of the factor IX gene and together are informative in approximately 70% of all cases. Each of the polymorphisms was successfully used in carrier detection studies after amplification of the relevant fragments. This method is also suitable for rapid antenatal diagnosis. Additionally we were able to amplify all eight exons of the factor IX gene including the splice junctions and a part of the 5'-region. Large deletions or insertions can be detected without further analysis. Several possibilities for the rapid detection of point mutations after DNA amplification have been described recently. The complete amplification of all functional parts of the Factor IX gene in combination with these new techniques should enable us to detect the majority of mutations leading to haemophilia B.