Cyanophycin granule polypeptide formation and degradation in the cyanobacterium Aphanocapsa 6308.

The effect of a number of conditions on the amount of cyanophycin granule polypeptide [multi-L-arginyl poly(L-aspartic acid)] formed in the unicellular cyanobacterium Aphanocapsa 6308 was determined. Light, CO2, sulfur, and phosphorus starvation as well as the addition of arginine to culture media increased the amount of cyanophycin granule polypeptide in cells when compared with that in cells grown under conditions optimal for growth. Nitrogen limitation and reduction of growth temperature to 30 degrees C decreased the amount of cyanophycin granule polypeptide on a dry-weight basis. Shift-up and shift-down experiments suggest cyanophycin granule polypeptide may be a reserve nitrogen polymer in Aphanocapsa 6308.     

A rapid and sensitive method for the analysis of cyanophycin

A method has been devised for the quantitative analysis of cyanophycin, based on (1)H nuclear magnetic resonance (NMR) spectroscopy, allowing determination of the nitrogen status of cyanobacteria. Cyanophycin is extracted with minimal washing from small volumes of cells and quantified by integration of the NMR peak attributed to the protons attached to the delta-carbon of arginine. Linear relationships were found between the amount of cyanophycin determined by this method and both known concentrations of cyanophycin solutions and the amount of cyanophycin determined using the standard chemical arginine assay.     

Identification of the Anabaena sp. strain PCC7120 cyanophycin synthetase as suitable enzyme for production of cyanophycin in gram-negative bacteria like Pseudomonas putida and Ralstonia eutropha

The cyanophycin synthetase gene cphA1 encoding the major cyanophycin synthetase (CphA) of Anabaena sp. strain PCC7120 was expressed in Escherichia coli conferring so far the highest specific CphA activity to E. coli (6.7 nmol arginine per min and mg protein). CphA1 and cphA genes of Synechocystis sp. strains PCC6803 and PCC6308 and Synechococcus strain MA19 were also expressed in wild types and polyhydroxyalkanoate-negative (PHA) mutants of Pseudomonas putida and Ralstonia eutropha. Recombinant strains of these bacteria expressing cphA1 accumulated generally more cyanophycin (23.0 and 20.0% of cellular dry matter, CDM, respectively) than recombinants expressing any other cphA (6.8, 9.0, or 15.8% of CDM for P. putida strains and 7.3, 12.6, or 14.1% of CDM for R. eutropha). Furthermore, PHA-negative mutants of P. putida (9.7, 10.0, 17.5, or 24.0% of CDM) and R. eutropha (8.9, 13.8, 16.0, or 22.0% of CDM) accumulated generally more cyanophycin than the corresponding PHA-positive parent strains (6.8, 9.0, 15.8, and 23.0% of CDM for P. putida strains and 7.3, 12.6, 14.1, or 20.0% of CDM for R. eutropha strains). Recombinant strains of Gram-positive bacteria (Bacillus megaterium, Corynebacterium glutamicum) were not suitable for cyanophycin production due to accumulation of less cyanophycin and retarded release of cyanophycin. PHA-negative mutants of P. putida and R. eutropha expressing cphA1 of Anabaena sp. strain PCC7120 are therefore preferred candidates for industrial production of cyanophycin.     

Cyanophycin synthetase-like enzymes of non-cyanobacterial eubacteria: characterization of the polymer produced by a recombinant synthetase of Desulfitobacterium hafniense

Some bacterial genomes were found to contain genes encoding putative proteins with considerable sequence homology to cyanophycin synthetase CphA of cyanobacteria. Such a gene from the Gram-positive, spore-forming anaerobe Desulfitobacterium hafniense was cloned. Expression in Escherichia coli resulted in the formation of a polydispers copolymer of aspartic acid and arginine, with a minor amount of lysine, of about 30 kDa molecular mass. In contrast to cyanophycin, this polymer was water-soluble. The structure of the polymer formed by the synthetase from Desulfitobacterium hafniense was studied by enzymatic degradation with the cyanophycin-specific hydrolase cyanophycinase, and by chemical and mass-spectroscopic analyses. Despite of the differences in solubility, indicating that both polymers cannot be completely identical, the chemical structure was found to be very similar to that of cyanophycin. The results suggest that the use of cyanophycin-like polymers as a nitrogen-rich reserve material is not restricted to cyanobacteria, and that such polymers may not necessarily be stored in granules.     

Cyanophycin production in a phycoerythrin-containing marine synechococcus strain of unusual phylogenetic affinity

Thirty-two strains of phycoerythrin-containing marine picocyanobacteria were screened for the capacity to produce cyanophycin, a nitrogen storage compound synthesized by some, but not all, cyanobacteria. We found that one of these strains, Synechococcus sp. strain G2.1 from the Arabian Sea, was able to synthesize cyanophycin. The cyanophycin extracted from the cells was composed of roughly equimolar amounts of arginine and aspartate (29 and 35 mol%, respectively), as well as a small amount of glutamate (15 mol%). Phylogenetic analysis, based on partial 16S ribosomal DNA (rDNA) sequence data, showed that Synechococcus sp. strain G2.1 formed a well-supported clade with several strains of filamentous cyanobacteria. It was not closely related to several other well-studied marine picocyanobacteria, including Synechococcus strains PCC7002, WH7805, and WH8018 and Prochlorococcus sp. strain MIT9312. This is the first report of cyanophycin production in a phycoerythrin-containing strain of marine or halotolerant Synechococcus, and its discovery highlights the diversity of this ecologically important functional group.     

The effect of chloramphenicol on the production of cyanophycin granule polypeptide in the blue-green alga Anabaena cylindrica

Summary The cyanophycin or structured granule of the blue-green algae is composed of polypeptides which are copolymers of aspartic acid and arginine. The addition of chloramphenicol to an exponentially growing culture of the blue-green alga Anabaena cylindrica at concentrations which completely inhibit protein synthesis results both in the inhibition of growth and in the accumulation of the cyanophycin granule polypeptide (CGP). The chloramphenicol induced increase in CGP content is energy dependent. Removal of the chloramphenicol results in resumption of growth and the hydrolysis of the stored CGP. The data presented indicate that CGP is synthesized via a non-ribosomal system and are consistent with the idea that CGP serves as a cellular nitrogen reserve.     

Effect of nitrogen source on cyanophycin synthesis in Synechocystis sp. strain PCC 6308

Experiments were carried out to examine the effects of nitrogen source on nitrogen incorporation into cyanophycin during nitrogen limitation and repletion, both with or without inhibition of protein synthesis, in cyanobacteria grown on either nitrate or ammonium. The use of nitrate and ammonium, 14N labeled in the growth medium and 15N labeled in the repletion medium, allows the determination of the source of nitrogen in cyanophycin using proton nuclear magnetic resonance spectroscopy. The data suggest that nitrogen from both the breakdown of cellular protein (14N) and directly from the medium (15N) is incorporated into cyanophycin. Nitrogen is incorporated into cyanophycin at different rates and to different extents, depending on the source of nitrogen (ammonium or nitrate) and whether the cells are first starved for nitrogen. These differences appear to be related to the activity of nitrate reductase in cells and to the possible expression of cyanophycin synthetase during nitrogen starvation.     

Application of a KDPG-aldolase gene-dependent addiction system for enhanced production of cyanophycin in Ralstonia eutropha strain H16

Two different recombinant plasmids both containing the cyanophycin synthetase gene (cphA) of Synechocystis sp. strain PCC6308 but differing concerning the resistance marker gene were tested for their suitability to produce high amounts of cyanophycin in recombinant strains of Ralstonia eutropha. Various cultivation experiments at the 30-L scale revealed very low cyanophycin contents of the cells ranging from 4.6% to 6.2% (w/w) of cellular dry weight (CDW) only, most probably because most cells had lost the corresponding plasmid during cultivation. To establish a cost effective and high efficient system for production of cyanophycin at larger scales using recombinant strains of R. eutropha, we applied two strategies: First, we integrated cphA into the dispensable chromosomal l-lactate dehydrogenase gene (ldh) of R. eutropha. Depending on the cultivation conditions used, relatively low cyanophycin contents between 2.2% and 7.7% (w/w) of CDW were reproducibly detected, which might be due to weak expression or low gene dosage in the single cphA copy strain of R. eutropha. In a second strategy we constructed a KDPG-aldolase gene (eda)-dependent addiction system, which combined features of a multi-copy plasmid with stabilized expression of cphA. Flasks experiments revealed that the cells accumulated extraordinarily high amounts of cyanophycin between 26.9% and 40.0% (w/w) of CDW even under cultivation conditions lacking cyanophycin precursor substrates or plasmid stabilizing antibiotics. Cyanophycin contents of up to 40.0% (w/w) of CDW were also obtained at a 30-L scale or a 500-L pilot-plant scale under such non-selective conditions. This demonstrates impressively that the stabilizing effect of the constructed eda-dependent addiction system can be used for production of enhanced amounts of cyanophycin at a larger scale in recombinant strains of R. eutropha.     

Molecular characterization of the cyanophycin synthetase from Synechocystis sp. strain PCC6308

A 3878-bp genomic region from the cyanobacterium Synechocystis sp. strain PCC6308, amplified by inverse PCR, harbored the structural genes cphA (2625 bp) and cphB (819 bp) encoding cyanophycin synthetase and cyanophycinase, respectively. Both primary structures exhibited a high degree of similarity to the corresponding translational products from other cyanobacteria. Five regions were localized in the cyanophycin synthetase consensus sequence by their resemblance to conserved sites of ATP-dependent carboxylate-amine/thiol ligases and three substrate ligases. The functionality of cphA was proven by heterologous expression of active enzyme and synthesis of cyanophycin in Escherichia coli, which led to a maximum cyanophycin content of 26.6% (w/w) of cell dry mass. Furthermore, a modified radiometric enzyme assay for a more reliable and feasible measurement of cyanophycin synthetase activity was developed and applied to reveal the substrate specificity of the enzyme.     

Variations in the amino acid composition of cyanophycin in the cyanobacterium Synechocystis sp. PCC 6308 as a function of growth conditions

Gas chromatography-mass spectrometry studies of the nitrogen isotopic composition of the N-trifluoroacetyl n-butyl ester derivatives of the amino acids from isolated hydrolyzed cyanophycin from ¹⁵N-enriched cells led to two major findings: (1) the amino acid composition of this granular polypeptide, isolated using procedures optimized for extracting and purifying cyanophycin from cells in the stationary growth phase, varied with the culture growth condition; (2) the rate of incorporation of exogenous nitrate differed for each nitrogen atom of the amino acid constituents of cyanophycin or cyanophycin-like polypeptide. Arginine and aspartic acid were the principle components of cyanophycin isolated from exponentially growing cells and from light-limited stationary phase cells, with glutamic acid as an additional minor component. The cyanophycin-like polypeptide from nitrogen-limited cells contained only aspartic and glutamic acids, but no arginine. The glutamic acid content decreased and arginine content increased as nitrate was provided to nitrogen-limited cells. These cells rapidly incorporated nitrate at different rates at each cyanophycin nitrogen site: guanidino nitrogens of arginine>aspartic acid >-amino nitrogen of arginine>glutamic acid. Little media-derived nitrogen was incorporated into cyanophycin of exponentially growing cells during one cellular doubling time.Abbreviations asp-TAB, glu-TAB, arg-TAB N-Trifluoroacetyl n-butyl ester derivatives of aspartic acid, glutamic acid and arginine, respectively - CAP chloramphenicol - CF correction factor - TFAA Trifluoroacetic anhydride - MBTFA N-Methyl-bis-trifluoroacetamide     

Biosynthesis of the cyanobacterial reserve polymer multi-L-arginyl-poly-L-aspartic acid (cyanophycin): mechanism of the cyanophycin synthetase reaction studied with synthetic primers.

Biosynthesis of the cyanobacterial nitrogen reserve cyanophycin (multi-L-arginyl-poly-L-aspartic acid) is catalysed by cyanophycin synthetase, an enzyme that consists of a single kind of polypeptide. Efficient synthesis of the polymer requires ATP, the constituent amino acids aspartic acid and arginine, and a primer like cyanophycin. Using synthetic peptide primers, the course of the biosynthetic reaction was studied. The following results were obtained: (a) sequence analysis suggests that cyanophycin synthetase has two ATP-binding sites and hence probably two active sites; (b) the enzyme catalyses the formation of cyanophycin-like polymers of 25-30 kDa apparent molecular mass in vitro; (c) primers are elongated at their C-terminus; (d) the constituent amino acids are incorporated stepwise, in the order aspartic acid followed by arginine, into the growing polymer. A mechanism for the cyanophycin synthetase reaction is proposed; (e) the specificity of the enzyme for its amino-acid substrates was also studied. Glutamic acid cannot replace aspartic acid as the acidic amino acid, whereas lysine can replace arginine but is incorporated into cyanophycin at a much lower rate.     

A cyanophycin synthetase from <Emphasis Type="Italic">Thermosynechococcus elongatus</Emphasis> BP-1 catalyzes primer-independent cyanophycin synthesis

Cyanophycin synthesis is catalyzed by cyanophycin synthetase (CphA). It was believed that CphA requires l-aspartic acid (Asp), l-arginine (Arg), ATP, Mg²⁺, and a primer (low-molecular mass cyanophycin) for cyanophycin synthesis and catalyzes the elongation of a low-molecular mass cyanophycin. Despite extensive studies of cyanophycin, the mechanism of primer supply is still unclear, and already-known CphAs were primer-dependent enzymes. In the present study, we found that recombinant CphA from Thermosynechococcus elongatus BP-1 (Tlr2170 protein) catalyzed in vitro cyanophycin synthesis in the absence of a primer. The Tlr2170 protein showed strict substrate specificity toward Asp and Arg. The optimum pH was 9.0, and Mg²⁺ or Mn²⁺ was essential for cyanophycin synthesis. KCl enhanced the cyanophycin synthesis activity of the Tlr2170 protein; in contrast, dithiothreitol did not. The Tlr2170 protein appeared to be a 400 ± 9 kDa homo-tetramer. The Tlr2170 protein showed thermal stability and retained its 80% activity after a 60-min incubation at 50°C. In addition, we examined cyanophycin synthesis at 30°C, 40°C, 50°C, and 60°C. SDS-PAGE analysis showed that the molecular mass of cyanophycin increased with increased reaction temperature.     

Cyanophycin Production in a Phycoerythrin-Containing Marine Synechococcus Strain of Unusual Phylogenetic Affinity

Thirty-two strains of phycoerythrin-containing marine picocyanobacteria were screened for the capacity to produce cyanophycin, a nitrogen storage compound synthesized by some, but not all, cyanobacteria. We found that one of these strains, Synechococcus sp. strain G2.1 from the Arabian Sea, was able to synthesize cyanophycin. The cyanophycin extracted from the cells was composed of roughly equimolar amounts of arginine and aspartate (29 and 35 mol%, respectively), as well as a small amount of glutamate (15 mol%). Phylogenetic analysis, based on partial 16S ribosomal DNA (rDNA) sequence data, showed that Synechococcus sp. strain G2.1 formed a well-supported clade with several strains of filamentous cyanobacteria. It was not closely related to several other well-studied marine picocyanobacteria, including Synechococcus strains PCC7002, WH7805, and WH8018 and Prochlorococcus sp. strain MIT9312. This is the first report of cyanophycin production in a phycoerythrin-containing strain of marine or halotolerant Synechococcus, and its discovery highlights the diversity of this ecologically important functional group.     

Molecular characterization of a thermostable cyanophycin synthetase from the thermophilic cyanobacterium Synechococcus sp. strain MA19 and in vitro synthesis of cyanophycin and related polyamides.

The thermophilic cyanobacterium Synechococcus sp. strain MA19 contained the structural genes for cyanophycin synthetase (cphA) and cyanophycinase (cphB), which were identified, cloned, and sequenced in this study. The translation products of cphA and cphB exhibited high levels of similarity to corresponding proteins of other cyanobacteria, such as Anabaena variabilis and Synechocystis sp. Recombinant cells of Escherichia coli harboring cphA colinear with lacPO accumulated cyanophycin that accounted for up to 25% (wt/wt) of the dry cell matter in the presence of isopropyl-beta-D-thiogalactopyranoside (IPTG). The cyanophycin synthetase was enriched 123-fold to electrophoretic homogeneity from the soluble fraction of the recombinant cells by anion-exchange chromatography, affinity chromatography, and gel filtration chromatography. The purified cyanophycin synthetase maintained the parental thermophilic character and was active even after prolonged incubation at 50 degrees C; in the presence of ectoine the enzyme retained 90% of its activity even after 2 h of incubation. The in vitro activity of the enzyme depended on ATP, primers, and both substrates, L-arginine and L-aspartic acid. In addition to native cyanophycin, the purified enzyme accepted a modified cyanophycin containing less arginine, alpha-arginyl aspartic acid dipeptide, and poly-alpha,beta-DL-aspartic acid as primers and also incorporated beta-hydroxyaspartic acid instead of L-aspartic acid or L-canavanine instead of L-arginine at a significant rate. The lack of specificity of this thermostable enzyme with respect to primers and substrates, the thermal stability of the enzyme, and the finding that the enzyme is suitable for in vitro production of cyanophycin make it an interesting candidate for biotechnological processes.     

A mutant of the cyanobacterium Anabaena variabilis ATCC 29413 lacking cyanophycin synthetase: growth properties and ultrastructural aspects

The gene cphA encoding cyanophycin synthetase was interrupted in Anabaena variabilis ATCC 29413 by insertional mutagenesis. The mutant lacked cyanophycin granules and the polar nodules of heterocysts. The mutant grew as fast as the wild-type irrespective of the nitrogen source at low light intensity whereas growth on N(2) was somewhat reduced in high light. It is concluded that cyanophycin metabolism and polar nodules are not essential for aerobic N(2) fixation.     

Production of cyanophycin, a suitable source for the biodegradable polymer polyaspartate, in transgenic plants

The production of biodegradable polymers in transgenic plants in order to replace petrochemical compounds is an important challenge for plant biotechnology. Polyaspartate, a biodegradable substitute for polycarboxylates, is the backbone of the cyanobacterial storage material cyanophycin. Cyanophycin, a copolymer of l-aspartic acid and l-arginine, is produced via non-ribosomal polypeptide biosynthesis by the enzyme cyanophycin synthetase. A gene from Thermosynechococcus elongatus BP-1 encoding cyanophycin synthetase has been expressed constitutively in tobacco and potato. The presence of the transgene-encoded messenger RNA (mRNA) correlated with changes in leaf morphology and decelerated growth. Such transgenic plants were found to produce up to 1.1% dry weight of a polymer with cyanophycin-like properties. Aggregated material, able to bind a specific cyanophycin antibody, was detected in the cytoplasm and the nucleus of the transgenic plants.     

Expression of Synechocystis sp. PCC6803 cyanophycin synthetase in Lactococcus lactis nisin-controlled gene expression system (NICE) and cyanophycin production

Cyanophycin is a natural source of polypetide consisting of aspartic acid as a backbone and arginine as its side chain. After the removal of arginine, the remaining poly-aspartate can be served in numerous industrial and biomedical applications. The synthesis of cyanophycin is catalyzed by cyanophycin synthetase. In this study, we used lactic acid bacteria to produce cyanophycin by nisin-controlled gene expression system (NICE). The cyanophycin synthetase gene cphA of Synechocystis sp. strain PCC6803 was cloned to the vector pNZ8149 followed by transformation into Lactococcus lactis subsp. cremoris NZ3900. The effects of nisin concentrations and the amounts of supplemented aspartic acid and arginine were examined for the production of cyanophycin. Alterations of the terminus of cphA gene were also conducted in an attempt to increase the yield of cyanophycin. An optimal cyanophycin production was noted under a culture condition of log phase induced at 250 ng/mL nisin in M17L medium supplemented with 20 mM arginine and 10 mM aspartic acid. An insertion of glycine residue at the C terminus of cyanophycin synthetase resulted in a yield of 20% of dry cell weight, a 10-fold increase when compared with the wild type. The results showed that recombinant lactic acid bacteria, a GRAS system, could provide an alternative approach of producing cyanophycin suitable for agricultural and biomedical applications.     

Assessments of growth conditions on the production of cyanophycin by recombinant Escherichia coli strains expressing cyanophycin synthetase gene

The synthesis of cyanophycin, a biodegradable polymer, is directed by cyanophycin synthetase. Polymerase chain reaction (PCR) cloned the gene cphA coding for cyanophycin synthetase from Synechocystis sp. PCC 6803 into pET-21b followed by transformation into two Escherichia coli hosts. The culture conditions for cyanophycin production were investigated, and the molecular weight and compositions of purified cyanophycin were analyzed. The results showed that E. coli BL21-CodonPlus(DE3)-RIL could produce 120 mg cyanophycin per gram dry cell weight in terrific medium. The purified cyanophycin consisted of insoluble and soluble forms at pH 7. The insoluble form had a higher molecular weight (20-32 kDa) than the soluble form (14-25 kDa). Both forms are composed of three major amino acids, aspartic acid, arginine, and lysine, and the insoluble form showed a higher arginine/lysine molar ratio (4.61 ± 0.31) than the soluble form (0.89 ± 0.05). In addition, the nitrogen sources could affect the yields of insoluble and soluble forms of cyanophycin. The medium containing additional lysine could enhance the proportion of the soluble form, but had little effect on the lysine and arginine percentages of both soluble and insoluble forms. The medium containing additional arginine slightly decreased the proportion of soluble form and altered its amino acid composition, with a minimal effect on the lysine and arginine percentages in the insoluble form.