Interaction of the Bacillus subtilis DnaA-like protein with the Escherichia coli DnaA protein.

Plasmids carrying the intact Bacillus subtilis dnaA-like gene and two reciprocal hybrids between the B. subtilis and Escherichia coli dnaA genes were constructed. None of the plasmids could transform wild-type E. coli cells unless the cells contained surplus E. coli DnaA protein (DnaAEc). A dnaA (Ts) strain integratively suppressed by the plasmid R1 origin could be transformed by plasmids carrying either the B. subtilis gene (dnaABs) or a hybrid gene containing the amino terminus of the E. coli gene and the carboxyl terminus of the B. subtilis gene (dnaAEc/Bs). In cells with surplus E. coli DnaA protein, expression of the E. coli dnaA gene was derepressed by the B. subtilis DnaA protein and by the hybrid DnaAEc/Bs protein, whereas it was strongly repressed by the reciprocal hybrid protein DnaABs/Ec. The plasmids carrying the different dnaA genes probably all interfere with initiation of chromosome replication in E. coli by decreasing the E. coli DnaA protein concentration to a limiting level. The DnaABs and the DnaAEc/Bs proteins effect this decrease possibly by forming inactive oligomeric proteins, while the DnaABs/Ec protein may decrease dnaAEc gene expression.     

Interactions of the Streptomyces lividans initiator protein DnaA with its target.

The Streptomyces lividans DnaA protein (73 kDa) consists, like other bacterial DnaA proteins, of four domains; it binds to 19 DnaA boxes in the complex oriC region. The S. lividans DnaA protein differs from others in that it contains an additional stretch of 120 predominantly acidic amino acids within domain II. Interactions between the DnaA protein and the two DnaA boxes derived from the promoter region of the S. lividans dnaA gene were analysed in vitro using three independent methods: Dnase-I-footprinting experiments, mobility-shift assay and surface plasmon resonance (SPR). The Dnase-I-footprinting analysis showed that the wild-type DnaA protein binds to both DnaA boxes. Thus, as in Escherichia coli and Bacillus subtilis, the S. lividans dnaA gene may be autoregulated. SPR analysis showed that the affinity of the DnaA protein for a DNA fragment containing both DnaA boxes from the dnaA promoter region (KD = 1.25 nM) is 10 times higher than its affinity for the single 'strong' DnaA box (KD = 12.0 nM). The mobility-shift assay suggests the presence of at least two classes of complex containing different numbers of bound DnaA molecules. The above data reveal that the DnaA protein binds to the two DnaA boxes in a cooperative manner. To deduce structural features of the Streptomyces domain II of DnaA protein, the amino acid DnaA sequences of three Streptomyces species were compared. However, according to the secondary structure prediction, Streptomyces domain II does not contain any common relevant secondary structural element(s). It can be assumed that domain II of DnaA protein can play a role as a flexible protein spacer between the N-terminal domain I and the highly conserved C-terminal part of DnaA protein containing ATP-binding domain III and DNA-binding domain IV.     

From footprint to toeprint: a close-up of the DnaA box, the binding site for the bacterial initiator protein DnaA.

The Escherichia coli DnaA protein binds as a monomer to the DnaA box, a 9 bp consensus sequence: 5'-TTA/TTNCACA. To assess the contribution of individual bases to protein binding we probed the DnaA-DnaA box complex with the uracil-DNA glycosylase (UDG) footprinting technique. (i) dU at the positions of T2, T4, T7' or T9' completely inhibits DnaA binding to the DnaA box. At these positions the methyl groups of the thymine residues are essential for successful DnaA binding, indicating protein contact with the major groove. Additionally they are positioned exactly on one side of the helix. (ii) dU at the position of T1 or at three T residues adjacent to the 9 bp core sequence of the DnaA box allows DnaA binding. These positions are protected from UDG digestion as revealed by the footprint assay. (iii) dU at the position of T3' on the complementary strand of teh box 5'-TTATCCACA was not protected from UDG digestion in DNA-DnaA complexes. Therefore, DnaA cannot contact the major groove at this position. In addition, a slight bend of the DnaA box towards UDG would help the enzyme to access this site.     

DnaA protein binding to individual DnaA boxes in the Escherichia coli replication origin, oriC.

The formation of nucleoprotein complexes between the Escherichia coli initiator protein DnaA and the replication origin oriC was analysed in vitro by band-shift assays and electron microscopy. DnaA protein binds equally well to linear and supercoiled oriC substrates as revealed by analysis of the binding preference to individual DnaA boxes (9-mer repeats) in oriC, and by a competition band-shift assay. DnaA box R4 (oriC positions 260-268) binds DnaA preferentially and in the oriC context with higher affinity than expected from its binding constant. This effect depends on oriC positions 249 to 274, is enhanced by the wild-type sequence in the DnaA box R3 region, but is not dependent on Dam methylation or the curved DNA segment to the right of oriC. DnaA binds randomly to the DnaA boxes R1, M, R2 and R3 in oriC with no apparent cooperativity: the binding preference of DnaA to these sites was not altered for templates with mutated DnaA box R4. In the oriC context, DnaA box R1 binds DnaA with lower affinity than expected from its binding constant, i.e. the affinity is reduced to approximately that of DnaA box R2. Higher protein concentrations were required to observe binding to DnaA box M, making this low-affinity site a novel candidate for a regulatory dnaA box.     

Insights into the quality of DnaA boxes and their cooperativity

Plasmids carrying the mioC promoter region with its two DnaA boxes are as efficient in titration of DnaA protein as plasmids carrying a replication-inactivated oriC region with its five DnaA boxes. The two DnaA boxes upstream of the mioC promoter were mutated in various ways to study the cooperativity between the DnaA boxes, and to study in vivo the in vitro-defined 9mer DnaA box consensus sequence (TT(A)/(T)TNCACA). The quality and cooperativity of the DnaA boxes were determined in two complementary ways: as titration of DnaA protein leading to derepression of the dnaA promoter, and as repression of the mioC promoter caused by the DnaA protein binding to the DnaA boxes. Titration of DnaA protein correlated with repression of the mioC promoter. The level of titration and repression with the normal promoter-proximal box (TTTTCCACA) depends strongly on the presence and the quality of a DnaA box in the promoter-distal position, whereas a promoter-proximal DnaA box with the sequence TTATCCACA titrated DnaA protein and caused significant repression of the mioC promoter without a promoter-distal DnaA box. The quality of the eight different consensus DnaA boxes located in the promoter-proximal position was determined: TTATCCACA had the highest affinity for DnaA protein. In the third position, A was better than T, and the four possibilities in the fifth position could be ranked as C >A >or=G >T. Parallel in vitro experiments using a purified DNA-binding domain of DnaA protein gave the same ranking of the binding affinities of the eight DnaA boxes.     

DnaA protein is required for replication of the minimal replicon of the broad-host-range plasmid RK2 in Escherichia coli.

The minimal origin of replication of the broad-host-range plasmid RK2 has two potential recognition sequences for the DnaA protein of Escherichia coli. DNA transfer by transformation into a dnaA-null mutant of E. coli showed that DnaA protein is needed for replication or maintenance of mini-RK2. We isolated and purified DnaA protein as a chimeric protein, covalently attached to a piece of collagen and beta-galactosidase. The hybrid protein specifically bound to restriction fragments from the oriV region of RK2, which contained the two dnaA boxes. Deletion of the second dnaA box inactivated the origin and abolished the binding of the hybrid protein to the DNA fragment that had suffered the deletion. When the second dnaA box was replaced with an EcoRI linker of identical length, origin activity was restored. Binding experiments showed that the linker provided a weak dnaA box. An alternative explanation was that the linker restored proper spacing between sequences on either side of the deleted box, thus restoring origin activity.     

Three distinct chromosome replication states are induced by increasing concentrations of DnaA protein in Escherichia coli.

The DnaA protein concentration in Escherichia coli was increased above the wild-type level by inducing a lacP-controlled dnaA gene located on a plasmid. In these cells with different DnaA protein levels, we measured several parameters: dnaA gene expression; cell size, amount of DNA per cell, and number of origins per cell by flow cytometry; and origin-to-terminus ratio and the frequencies of five other markers on the chromosome by Southern hybridization. The response of the cells to higher levels of DnaA protein could be divided into three states. From the normal level to a level 1.5-fold higher, DnaA protein had little effect on dnaA gene expression and the rate of DNA replication but led to nearly proportional increases in DNA and origin concentrations. Between 1.5- and 3-fold, the normal DnaA protein concentration, dnaA gene expression was gradually decreased. In this interval, the origin concentration increased significantly; however, the replication rate was severely affected, becoming slower--especially near the origin--the higher the DnaA protein concentration, and as a result, the DNA concentration was constant. Further increases in the DnaA protein concentration did not lead to an increased origin concentration. Thus, the initiation mass was set by the DnaA protein from the normal level to an at least twofold-increased level, but the increased initiation did not lead to a large increase in the amount of DNA per unit of mass because of the inhibition of replication fork velocity.     

Escherichia coli DnaA protein: specific biochemical defects of mutant DnaAs reduce initiation frequency to suppress a temperature-sensitive dnaX mutation

The Escherichia coli dnaA73, dnaA721, and dnaA71 alleles, which encode A213D, R432L, T435K substitutions, respectively, were originally isolated as extragenic suppressors of a temperature-sensitive dnaX mutant. As the A213D substitution resides in a domain that functions in ATP binding and the R432L and T435K substitutions affect residues that recognize the DnaA box motif, they might be expected to reduce ATP and specific DNA binding, respectively. Therefore, a major objective was to quantify the biochemical defects of the mutant DnaAs to understand how the altered proteins suppress the temperature-sensitive phenotype of a dnaX mutant. A second purpose was to address the paradox that mutant proteins with substitutions of amino acids essential for recognition of the DnaA box motifs within the E. coli replication origin (oriC) may well be inactive in initiation, yet chromosomal dnaA mutants expressing DnaA proteins with the R432L and T435K substitutions are viable at temperatures from 30 to 39 degrees C. We show biochemically that mutant DnaAs carrying R432L and T435K substitutions fail to bind to the DnaA box sequence. The A213D mutant is sevenfold reduced in its affinity for ATP compared to wild-type DnaA, and its affinity for the DnaA box sequence is also reduced. However, the reduced activity of the A213D mutant in oriC plasmid replication appears to arise from a defect in DnaA oligomerization. Although the T435K mutant fails to bind to the DnaA box sequence, other results suggest that DnaA oligomerization stabilizes the binding of the mutant DnaA to oriC to support its partial activity in initiation in vitro. These results support a model that suppression of dnaX occurs by reducing the frequency of initiation to a manageable level for the mutant DnaX so that viability is maintained.     

Low-Temperature-Induced DnaA Protein Synthesis Does Not Change Initiation Mass in Escherichia coli K-12

Expression of the dnaA gene continues in the lag phase following a temperature downshift, indicating that DnaA is a cold shock protein. Steady-state DnaA protein concentration increases at low temperatures, being twofold higher at 14 degrees C than at 37 degrees C. DnaA protein was found to be stable at both low and high temperatures. Despite the higher DnaA concentration at low temperatures, the mass per origin, which is proportional to the initiation mass, was the same at all temperatures. Cell size and cellular DNA content decreased moderately below 30 degrees C due to a decrease in the time from termination to division relative to generation time at the lower temperatures. Analysis of dnaA gene expression and initiation of chromosome replication in temperature shifts suggests that a fraction of newly synthesized DnaA protein at low temperatures is irreversibly inactive for initiation and for autorepression or that all DnaA protein synthesized at low temperatures has an irreversible low-activity conformation.     

Isolation of a dnaA mutant of Bacillus subtilis defective in initiation of replication: amount of DnaA protein determines cells'' initiation potential.

The dnaA gene is essential for initiation of chromosomal replication in Escherichia coli. A gene homologous with the E. coli dnaA was found in the replication origin region of the Bacillus subtilis chromosome. We have now isolated a temperature sensitive mutant of the B. subtilis dnaA by in vitro mutagenesis of the cloned gene. At a nonpermissive temperature, 49 degrees C, DNA replication stops completely after 60% increase in a rich medium, while cell mass continues to increase exponentially at 2.5 times the rate at 30 degrees C. A ratio of gene frequency between purA (origin marker) and metB (terminus marker) changes gradually from 2.7 at 30 degrees C to 1.0 in 45 min at 49 degrees C, indicating completion of the ongoing replication cycle. Upon the temperature shift down to 30 degrees C after the incubation at 49 degrees C for 60 min, DNA replication resumes without delay, and the purA/metB ratio increases rapidly to 6, i.e. consecutive initiation of more than two rounds of replication. Addition of chloramphenicol at the time of the temperature shift down did not inhibit the increase in the purA/metB ratio, while rifampicin inhibited the re-initiation completely. The mutation is a single base change from C to T in the dnaA gene resulting in an amino acid substitution from Ser to Phe in the DnaA protein. The mutation was responsible for both temperature sensitive growth and the defect in initiation of chromosomal replication. We observed a remarkable correlation between the amount of DnaA protein and the amount of initiation potential accumulated during incubation at the non-permissive temperature.