Mode of action of colicin Ib Formation of ion-permeable membrane channels

Addition of purified colicin Ib to whole Escherichia coli cells or cytoplasmic membrane vesicles inhibits their subsequent ability to generate a membrane potential. In addition, this colicin is shown to bring about a voltage-dependent increase in the conductance of an artificial planar bilayer membrane prepared from soybean phospholipids. This results from the formation of ion-permeable channels. These data provide strong evidence that the depolarization of Escherichia coli cells by this colicin results from an Ib-induced increase in membrane permeability to ions.     

Enterotoxin of Clostridium perfringens type A forms ion-permeable channels in a lipid bilayer membrane

The enterotoxin of Clostridium perfringens type A was found to form ion-permeable channels in a lipid bilayer. A patch clamp technique was used to detect channel activities in an asolectin bilayer with incorporated enterotoxin. About 20% of the lipid bilayer patches examined showed rectangular or stepwise shift of membrane current. The shifts indicated the gating of ion-permeable channels in the patches. The channels showed high conductance (40-450 pS), no rectification in current-voltage curves and occasional long-lasting events. The significance of these findings is discussed in relation to the mechanism of action of the toxin.     

Mechanosensitive membrane channels in action

The tension-driven gating process of MscL from Mycobacterium tuberculosis, Tb-MscL, has been addressed at near-atomic detail using coarse-grained molecular dynamics simulations. To perform the simulations, a novel coarse-grained peptide model based on a thermodynamic parameterization of the amino-acid side chains has been applied. Both the wild-type Tb-MscL and its gain-of-function mutant V21D embedded in a solvated lipid bilayer have been studied. To mimic hypoosmotic shock conditions, simulations were performed at increasing levels of membrane tension approaching the rupture threshold of the lipid bilayer. Both the wild-type and the mutant channel are found to undergo significant conformational changes in accordance with an irislike expansion mechanism, reaching a conducting state on a microsecond timescale. The most pronounced expansion of the pore has been observed for the V21D mutant, which is consistent with the experimentally shown gain-of-function phenotype of the V21D mutant.     

Colicin occlusion of OmpF and TolC channels: outer membrane translocons for colicin import

The interaction of colicins with target cells is a paradigm for protein import. To enter cells, bactericidal colicins parasitize Escherichia coli outer membrane receptors whose physiological purpose is the import of essential metabolites. Colicins E1 and E3 initially bind to the BtuB receptor, whose beta-barrel pore is occluded by an N-terminal globular "plug". The x-ray structure of a complex of BtuB with the coiled-coil BtuB-binding domain of colicin E3 did not reveal displacement of the BtuB plug that would allow passage of the colicin (Kurisu, G., S. D. Zakharov, M. V. Zhalnina, S. Bano, V. Y. Eroukova, T. I. Rokitskaya, Y. N. Antonenko, M. C. Wiener, and W. A. Cramer. 2003. Nat. Struct. Biol. 10:948-954). This correlates with the inability of BtuB to form ion channels in planar bilayers, shown in this work, suggesting that an additional outer membrane protein(s) is required for colicin import across the outer membrane. The identity and interaction properties of this OMP were analyzed in planar bilayer experiments.OmpF and TolC channels in planar bilayers were occluded by colicins E3 and E1, respectively, from the trans-side of the membrane. Occlusion was dependent upon a cis-negative transmembrane potential. A positive potential reversibly opened OmpF and TolC channels. Colicin N, which uses only OmpF for entry, occludes OmpF in planar bilayers with the same orientation constraints as colicins E1 and E3. The OmpF recognition sites of colicins E3 and N, and the TolC recognition site of colicin E1, were found to reside in the N-terminal translocation domains. These data are considered in the context of a two-receptor translocon model for colicin entry into cells.     

The dynamic activation of colicin Ia channels in planar bilayer lipid membrane

Dynamic activation of ion channels formed by colicin Ia incorporated into a planar bilayer lipid membrane (BLM) was investigated by the voltage clamp technique using different step voltage stimuli. We have demonstrated a critical resting interval, Deltat(c), between two identical successive voltage pulses. If the second pulse is applied within Deltat(c), it produces a predictable current response. On the contrary, if the second pulse is applied after Deltat(c), the current response cannot be reliably predicted. Computer simulations based on an idealized mathematical model, developed in this paper, qualitatively reproduce the system's dynamic responses to stimulus trains. The behavior of the ion channels, when the resting period exceeds Deltat(c), may be interpreted as a transient gain or loss or resetting of memory, as revealed by a specific sequence of electrical pulses used for stimulation.     

Mechanism of colicin action: early events

The kinetics and the temperature dependence of potassium loss from Escherichia coli cells treated with colicin K have been examined. At 37 C, after a single lethal hit, essentially all of the intracellular potassium is lost within the first few minutes of treatment. The initial rate of loss is linearly related to colicin concentration up to a multiplicity of 30. As the temperature is decreased over the range from 37 to 1 C, an increasing delay is seen in the initiation of potassium loss after colicin adsorption. This delay can be overcome by increasing colicin multiplicity and probably reflects an alteration of the cell membrane at these temperatures. A comparison of this effect with an apparently related effect of temperature on the action of irehdiamine A indicates that the delay may represent the inhibition of a transmission process occurring in the membrane.     

Formation of large, ion-permeable membrane channels by the matrix protein (porin) of Escherichia coli.

One of the major proteins of the outer membrane of Escherichia coli, the matrix protein (porin), has been isolated by detergent solubilisation. When the protein is added in concentrations of the order 10 ng/cm3 to the outer phases of a planar lipid bilayer membrane, the membrane conductance increases by many orders of magnitude. At lower protein concentrations the conductance increases in a stepwise fashion, the single conductance increment being about 2 nS (1 nS = 10(-9) siemens = 10(-9) omega -1) in 1 MKCl. The conductance pathway has an ohmic current vs. voltage character and a poor selectivity for chloride and the alkali ions. These findings are consistent with the assumption that the protein forms large aqueous channels in the membrane. From the average value of the single-channel conductance a channel diameter of about 0.9 nm is estimated. This channel size is consistent with the sugar permeability which has been reported for lipid vesicles reconstituted in the presence of the protein.     

Formation of large,ion-permeable membrane channels by the matrix protein (porin) of Escherichia coli

One of the major proteins of the outer membrane of Escherichia coli, the matrix protein (porin), has been isolated by detergent solubilisation. When the protein is added in concentrations of the order of 10 ng/cm³ to the outer phases of a planar lipid bilayer membrane, the membrane conductance increases by many orders of magnitude. At lower protein concentrations the conductance increases in a stepwise fashion, the single conductance increment being about 2 nS ($\text{1}\text{nS}\text{= 10}{}^{\mathrm{?9}}\text{siemens}\text{= 10}{}^{\mathrm{?9}}\text{Ω}{}^{\mathrm{?1}}$) in 1 M KCl. The conductance pathway has an ohmic current vs. voltage character and a poor selectivity for chloride and the alkali ions. These findings are consistent with the assumption that the protein forms large aqueous channels in the membrane. From the average value of the single-channel conductance a channel diameter of about 0.9 nm is estimated. This channel size is consistent with the sugar permeability which has been reported for lipid vesicles reconstituted in the presence of the protein.     

The membrane channel-forming colicin A: synthesis, secretion, structure, action and immunity

The study of colicin release from producing cells has revealed a novel mechanism of secretion. Instead of a built-in 'tag', such as a signal peptide containing information for secretion, the mechanism employs coordinate expression of a small protein which causes an increase in the envelope permeability, resulting in the release of the colicin as well as other proteins. On the other hand, the mechanism of entry of colicins into sensitive cells involves the same three stages of protein translocation that have been demonstrated for various cellular organelles. They first interact with receptors located at the surface of the outer membrane and are then transferred across the cell envelope in a process that requires energy and depends upon accessory proteins (TolA, TolB, TolC, TolQ, TolR) which might play a role similar to that of the secretory apparatus of eukaryotic and prokaryotic cells. At this point, the type of colicin described in this review interacts specifically with the inner membrane to form an ion channel. The pore-forming colicins are isolated as soluble proteins and yet insert spontaneously into lipid bilayers. The three-dimensional structures of some of these colicins should soon become available and site-directed mutagenesis studies have now provided a large number of modified polypeptides. Their use in model systems, particularly those in which the role of transmembrane potential can be tested for polypeptide insertion and ionic channel gating, constitutes a powerful handle with which to improve our understanding of the dynamics of protein insertion into and across membranes and the molecular basis of membrane excitability. In addition, their immunity proteins, which exist only in one state (membrane-inserted) will also contribute to such an understanding.     

Mode of action of membrane active antimicrobial peptides

Water-membrane soluble protein and peptide toxins are used in the defense and offense systems of all organisms, including plants and humans. A major group includes antimicrobial peptides, which serve as a nonspecific defense system that complements the highly specific cell-mediated immune response. The increasing resistance of bacteria to conventional antibiotics stimulated the isolation and characterization of many antimicrobial peptides for potential use as new target antibiotics. The finding of thousands of antimicrobial peptides with variable lengths and sequences, all of which are active at similar concentrations, suggests a general mechanism for killing bacteria rather than a specific mechanism that requires preferred active structures. Such a mechanism is in agreement with the "carpet model" that does not require any specific structure or sequence. It seems that when there is an appropriate balance between hydrophobicity and a net positive charge the peptides are active on bacteria. However, selective activity depends also on other parameters, such as the volume of the molecule, its structure, and its oligomeric state in solution and membranes. Further, although many studies support that bacterial membrane damage is a lethal event for bacteria, other studies point to a multihit mechanism in which the peptide binds to several targets in the cytoplasmic region of the bacteria.     

A carboxy-terminal fragment of colicin Ia forms ion channels

A carboxy-terminal, 18 kD fragment of colicin Ia, a bacterial toxin, forms ion channels in artificial phospholipid bilayers. This fragment, which comprises a quarter of the intact 70 kD molecule, is resistant to extensive protease digestion and probably constitutes a structural domain of the protein. The ion channels formed by the 18 kD fragment are functionally heterogeneous, having conductances that range from 15 to 30 pS at positive voltages and from 70 to 250 pS at negative voltages, and open lifetimes that range from at least 25 msec to 5 sec. In contrast, ion channels formed by whole colicin Ia open only at negative voltages, at which their conductances range from 6 to 30 pS, and their open lifetimes range from 1 sec to 3 min. Additionally, the open state of the 18 kD fragment channel is characterized by noisy fluctuations in current, while the open state of the whole molecule ion channel is often marked by numerous, stable subconductance states. Since the properties of the fragment channel differ substantially from those of the whole molecule channel, we suggest that portions of the molecule outside of the 18 kD fragment are involved in forming the whole molecule ion channel.     

Sizing the protein translocation pathway of colicin Ia channels

The bacterial toxin colicin Ia forms voltage-gated channels in planar lipid bilayers. The toxin consists of three domains, with the carboxy-terminal domain (C-domain) responsible for channel formation. The C-domain contributes four membrane-spanning segments and a 68-residue translocated segment to the open channel, whereas the upstream domains and the amino-terminal end of the C-domain stay on the cis side of the membrane. The isolated C-domain, lacking the two upstream domains, also forms channels; however, the amino terminus and one of the normally membrane-spanning segments can move across the membrane. (This can be observed as a drop in single-channel conductance.) In longer carboxy-terminal fragments of colicin Ia that include /=90 mV, even a 26-A stopper is translocated. Upon reduction of their disulfide bonds, all of the stoppers are easily translocated, indicating that it is the folded structure, rather than some aspect of the primary sequence, that slows translocation of the stoppers. Thus, the pathway for translocation is >/=26 A in diameter, or can stretch to this value. This is large enough for an alpha-helical hairpin to fit through.     

Mode of action of gramicidin S on Escherichia coli membrane

The action of a cationic antibiotic gramicidin S on the outer and cytoplasmic membranes of Escherichia coli was studied. It was found that gramicidin S disrupted the permeability barrier of the outer membrane, permitting the permeation of an antibiotic ionophore, this being similar to the action of the dimer in compound 48/80 (Katsu, T., Shibata, M. and Fujita, Y. (1985) Biochim. Biophys. Acta 818, 61-66). However, differently from the dimer, gramicidin S further stimulated the efflux of K+ through the cytoplasmic membrane of E. coli. The time course of K+ permeability change accorded well with that of change in the viability of E. coli cells. These changes occurred at temperatures above the phase transition of the cytoplasmic membrane. This temperature range differed greatly from the case of polymyxin B, a polycationic antibiotic acting at temperatures above the phase transition of the outer membrane. We discuss the mode of gramicidin S action on the cytoplasmic membrane of E. coli, in comparison with the results on red blood cells and liposomes.