PINUS BUCHANANII,A NEW SPECIES BASED ON A PETRIFIED CONE FROM THE OLIGOCENE OF WASHINGTON

A silicified seed cone of Oligocene age from the Olympic Peninsula of Washington represents a new species of Pinus. The cone was about 8 cm long and 3 cm at its widest diameter in the living condition. Its scale apices are thickened and each has a dorsal umbo. Internal cone construction confirms the assignment of the new species to Pinus and suggests affinity with the subsections Australes and Ponderosae of the section Pinus, subgenus Pinus. The cone is peculiar in having a stout bract trace that is slightly concave on its adaxial side and in having resin canals that diverge from the axial secretory system toward the bract but constrict markedly and terminate before entering the bract.     

PINUS WOLFEI,A NEW PETRIFIED CONE FROM THE EOCENE OF WASHINGTON

A silicified cone from the Late Eocene of Washington is described as a new fossil species of Pinus. The cone was probably 9–10 cm long and 3–5 cm at its widest diam in the living condition and is peculiar in having abundant resin canals in the secondary xylem of the axis arranged in three concentric rings near the cone base. The bract of the fossil is also unusual in having resin canals of distinctly unequal sizes and a vascular strand that is adaxially concave. In the absence of external features of the scale tips, these anatomical conditions along with the construction of the outer cortex of the axis of thick-walled cells suggest closest affinity of the new species with the subsections Contortae, Oocarpae, and Sylvestres of the section Pinus, subgenus Pinus.     

Pinus MUTOI (Pinaceae), a new species of permineralized seed cone from the upper Cretaceous of Hokkaido,Japan

Pinus mutoi is described as a new species on the basis of a permineralized seed cone from the Upper Cretaceous of Hokkaido, Japan. The cone is at least 20 cm long and up to 6 cm in diameter, consisting of a cone axis and numerous cone-scale complexes that are arranged helically around the axis. Two winged seeds are borne on the adaxial surface of each ovuliferous scale. Each complex receives a single trace from the vascular cylinder of the cone axis. In the scale base, all the resin canals occur abaxially to the vascular strand. The spatulate bract of the fossil is unique to the specimen among the cones of both living and fossil Pinus. The central umbo, broad sclerotic cortex of cone axis, and absence of serotinous features of the fossil cone suggest affinity with the subsection Sylvestres of the section Pinus, subgenus Pinus. This is the first record of permineralized preserved Pinus cone from the Cretaceous of Eastern Eurasia.     

PINUS AVONENSIS,A NEW SPECIES OF PETRIFIED CONES FROM THE OLIGOCENE OF WESTERN MONTANA

Fossils from the Oligocene of western Montana described in this treatment are the first structurally preserved ovulate cones of Pinus to be reported from the Tertiary of North America. They are about 5.5 cm long and have a maximum diam of 2.5 cm. Numerous scales are arranged spirally around the axis and each scale bears two winged seeds. The bract subtending the ovuli-ferous scale is 3-4 mm long and is free from the scale throughout its length. The pith and cortex of the axis are constructed of thick-walled parenchyma cells and 18-21 resin canals occur at the inner edge of the cortex. Resin canals entering the base of the ovuliferous scale are restricted to the abaxial side with vascular tissues occupying the adaxial side. Vascular strands near the tip of the scale are strongly rounded on the adaxial or phloem side. At the abaxial side of the tip of the ovuliferous scale is a broadly rhomboidal apophysis with a raised umbo that terminates in a short spine. The fossils differ from the several Recent cones examined in having fewer resin canals and biseriate rays in the secondary xylem of the cone axis. The shape of the cone, its anatomical features, and the morphology of the tip of the cone scale indicate affinity with the subgenus Diploxylon.     

PITYOSTROBUS PUBESCENS,A NEW SPECIES OF PINACEOUS CONES FROM THE LATE CRETACEOUS OF NEW JERSEY

This new species is based on a single semifusinized cone from the Late Cretaceous (Cenomanian) of New Jersey. The cone is flattened but essentially complete. It is 55 mm long and 8 by 13 mm in diam. Scale apices are thin, rounded, and entire, lacking evidence of an umbo or spine. The vascular cylinder of the cone axis is organized as a series of separate strands. The scale is made up of a basal portion that stands out nearly perpendicular to the cone axis and a sharply upturned distal portion. The bract base has a pronounced abaxial keel. Bract and scale traces diverge from the vascular cylinder of the cone axis separately from one another. A poorly developed interseminal ridge is present at the chalazal end of the seeds. An unusual feature of the cone is the presence of a trichome-bearing epidermis on the cone axis, bract-scale complex, and near the scale apex. Resin canals diverge into the bract-scale complex abaxial to the scale trace with branches becoming adaxial to the scale trace outward. A number of features of the new species occur in cones of Abies, Cedrus, Keteleeria, Larix, Picea, Pseudolarix, Pseudotsuga, and Tsuga as well as in the extinct genus Pseudoaraucaria. Features of Pinus are absent. This suggests that Pseudoaraucaria may have served as an ancestral source for modern genera other than Pinus with Pityostrobus pubescens representing an evolutionary intermediate.     

SILICIFIED PINUS REMAINS FROM THE MIOCENE OF WASHINGTON

Silicified leaves, dwarf shoots, pollen cones, and seed cones of Pinus from a Late Miocene chert bed within the Yakima Basalt Formation near Yakima, Washington are interpreted as coming from a single new species, P. foisyi. The needles and dwarf shoots are those of a three-needle pine. The needles contain two to four medial resin canals, a biform hypodermis, and endodermal cells with uniformly thickened walls. The pollen cones are ellipsoidal and about 1 cm long, and many contain bisaccate pollen grains. The seed cones are at least 6 cm long and are slightly asymmetrical. The cone axis has a broad sclerotic outer cortex, and the seed wing extends from a thick parenchymatous base. The scale apex bears a conspicuously swollen projection. The foliage and seed cones are identifiable with the Subgenus Pinus, Section Pinus, Subsection Oocarpae independently of one another, and together indicate a fossil species related to the modem Californian closed cone pines. Pinus foisyi represents one of the earliest occurrences of cone asymmetry associated with this group. However, cone serotiny characteristic of the modem species appears to have evolved after the Late Miocene.     

PICEA WOLFEI,A NEW SPECIES OF PETRIFIED CONE FROM THE MIOCENE OF NORTHWESTERN NEVADA

Several silicified ovulate cones from the late middle Miocene (Barstovian) represent a new species, Picea wolfei Crabtree. This is the second species of Picea for which structurally preserved seed cones are known to be reported from the Tertiary. The cones are 5.0–8.0 cm long and 1.5–2.0 cm at their greatest diameter. Ovuliferous scales are inserted helically around the cone axis and are recurved at their point of divergence. Each scale is broadly obovate to spatulate with a rounded apex and bore two seeds adaxially. The bract subtending the scale is 4.5–7.3 mm long and is fused to the scale for 1.4–2.0 mm. Each bract has an inflated keel-like base which projects abaxially between the seeds of adjacent scales. The fossil cones superficially resemble those of the extant Picea breweriana, yet differ from them anatomically. The new species also resembles Picea lahontense, a fossil compression from the Miocene Trout Creek Flora of south-central Oregon, but the different modes of preservation preclude meaningful comparison. Picea diettertiana, the only structurally preserved fossil cone of this genus previously described, is quite dissimilar in that it lacks a sclerotic pith.     

A NEW SPECIES OF PICEA BASED ON SILICIFIED SEED CONES FROM THE OLIGOCENE OF WASHINGTON

Picea eichhornii n. sp. is described from anatomically preserved seed cones. The fossils are from the Early Oligocene Jansen Creek Member of the Makah Fm. which is exposed along the northern shore of the Olympic Peninsula, Washington. The cones are at least 5.5 cm long and up to 3.5 cm in diameter. The cone axis is 4–6 mm in diameter and contains a pith made up of thick-walled parenchyma cells. Resin canals occur in a single ring in the secondary xylem in some specimens but are absent in others. The cortex is mostly parenchymatous and contains numerous large axial resin canals that branch to supply the bract and scale. Vascular traces to each scale and its subtending bract diverge separately from the vascular cylinder of the cone axis. The bract is tongue-shaped and keeled at its base. It is 5 mm wide and up to 9 mm long. The bract trace fades out before entering the bract base while two resin canals extend into the bract base. The ovuliferous scale is about 2.3 cm long and has a thin, probably papery, apex. Resin canals of the scale occur abaxial to the vascular tissue in the scale base, but some bend around the margins of the vascular strand to become adaxial outward. About 20 resin canals occur in the abaxial scale sclerenchyma, and this is the main anatomical feature that distinguishes these cones as a new species. There are less than 14 such canals in cones in a reference collection of 15 modern species and in the two fossil species known from anatomically preserved material. While the new species adds to our knowledge of the diversity of Cenozoic Picea, its affinities within the genus remain undetermined.     

A NEW SCIADOPITYACEOUS SEED CONE FROM THE UPPER CRETACEOUS OF HOKKAIDO,JAPAN

A sciadopityaceous seed cone, Sciadopityostrobus kerae, gen. et sp. nov., is described on the basis of a permineralized specimen from the Upper Cretaceous (Cenomanian–Coniacian) of Hokkaido, Japan. The peel method was applied for anatomical observations. The seed cone consists of a cone axis receiving numerous cone scale complexes that are arranged helically. Each complex generally has five inverted ovules that are oriented adaxially. The cone is similar to those of living Sciadopitys verticillata with respect to its peltate cone scale complex, with free apices of both bract and ovuliferous scale, trichomes on the bract, and a trifurcated ovuliferous scale strand. In the fossil, the bract and ovuliferous scale strands fuse with each other in the basal part of the cone scale complex, while S. verticillata bract and ovuliferous scale strands are derived separately from the vascular cylinder and remain separate throughout their length. The present specimen is one of the oldest records of structurally preserved cones that can be assigned to the family Sciadopityaceae.     

PICEA DIETTERTIANA,A NEW SPECIES OF PETRIFIED CONES FROM THE OLIGOCENE OF WESTERN MONTANA

Fossils described in this treatment are the first structurally-preserved ovulate cones of Picea to be reported from the Tertiary. They are 5.0-5.8 cm long and 1.6-1.8 cm at their widest diameter. Numerous ovuliferous scales are arranged spirally around the axis and each bore two winged seeds. The bract subtending the scale is 4.0-7.0 mm long and is fused to the scale for 1.0 mm. The base of the bract is inflated on the abaxial side extending for about 1.0 mm between the seeds of the adjacent scales. Both the scales and their subtending bracts are recurved at their point of divergence from the axis. The ovuliferous scales taper gradually to a point, and the thickness of the tissues at the scale apex indicates that they were woody. Anatomically, the silicified cones are very similar to those of the Recent species and indicate that all important features of the latter had evolved by Oligocene time.     

THE MOTION OF WINDBORNE POLLEN GRAINS AROUND CONIFER OVULATE CONES: IMPLICATIONS ON WIND POLLINATION

Comparisons are presented between the three-dimensional airflow patterns created around and by a scale model of a conifer ovulate cone and the trajectories of windborne pollen grains around Picea, Larix, and Pinus ovulate cones. Three general components of the airflow pattern around an ovulate cone model are 1) doldrum-like eddies, rotating over the adaxial surfaces of cone scales and directed toward attached ovules, 2) airflow spiralling around the cone axis along cone scale orthostichies and parastichies, and 3) a complex pattern of vortices (“umbilicus”) directed toward the leeward surface of the ovulate cone. The observed trajectories of pollen grains around cones of Picea, Larix, and Pinus conform to two of these three airflow components: 1) pollen grains are seen to roll along cone scales toward the distal scale margin and to become reentrained in airflow directed backward toward attached ovules, and 2) pollen grains passing around the cone are deflected into the “umbilicus” airflow pattern, where they either settle on or impact with cone scales (approach trajectories), or where they approach the leeward cone surface but are deflected away by airflow passing under the cone (Z-shaped trajectories). Vectoral analyses of pollen grain motion reveal a complex pattern of trajectories influenced by boundary layer conditions defined by ovulate cone geometry and ambient airflow speed. Wind tunnel studies of ovulate cones subtended by leaves and stem indicate that leaves circumscribing the cone act as a snowfence, deflecting windborne pollen toward the cone. Vectoral analyses of airflow patterns and pollen grain trajectories close to ovulate cones indicate that wind pollination in conifers is a non-stochastic aerodynamic process influenced by cone-leaf morphology and the behavior of pollen grains as windborne particles.     

SEEDS AND EMBRYOS OF ARAUCARIA MIRABILIS

Seeds and embryos contained within the silicified ovuliferous cone Araucaria mirabilis from the Cerro Cuadrado petrified forest are described. One wingless seed, 0.8–1.3 cm in length and 0.2–0.6 cm in width, is embedded in each ovuliferous scale. Seeds show a three-layered integument and a prominent wavy nucellus which is attached basally to the endotesta. The megagametophyte contains cellular inclusions that may represent starch grains. Ovule vascularization is complex and appears most similar to that of Araucaria bidwillii. Embryos 2 mm long and 0.25 mm wide appear to be in a telo-stage period of development. Shoot apex, cotyledons, root meristem, and calyptroperiblem are present in the embryos in which vascular tissues and secretory elements were beginning to differentiate at the time of fossilization. Embryo ontogeny is considered in light of stages encountered in extant gynmosperm taxa. The absence of the microgametophyte phase in the Cerro Cuadrado collection is discussed.     

STEMS AND LEAVES OF CUNNINGHAMIOSTROBUS GOEDERTII FROM THE OLIGOCENE OF WASHINGTON

This report is based on nine specimens of fossil conifer stems and leaves from the Early Oligocene Jansen Creek Member of the Makah Formation. They were collected along the northern shore of the Olympic Peninsula of Washington. The fossils are preserved as siliceous permineralizations and were exposed in surface view along rock fractures. Details of leaf morphology and epidermal construction appear on fracture surfaces of certain specimens while the cellular construction of the leaves and twigs is visible in thin sections. Leaves are dorsiventrally flattened, attached to twigs that contain up to four growth increments of secondary xylem, up to 2.3 cm long, 3.5 mm wide, and have parallel margins with minute teeth. The leaves are about 0.5 mm thick and have a central vascular strand surrounded by transfusion tissue. A large resin canal occurs abaxial to the vascular strand, and generally two additional resin canals occur in the mesophyll near each leaf margin. Leaves are mostly hypostomatic, with sunken stomata in two longitudinal bands, one to each side of the midline of the leaf and each containing eight to 13 longitudinal rows of stomata. Several unusual anatomical features in the stems also occur in the peduncle and cone axis of seed cones described as Cunninghamiostrobus goedertii, which occurs at the same locality. Thus, the leafy twigs belong to the same species as produced the cones. The cones, leaves, and shoots of this Tertiary conifer are similar to those of modern Cunninghamia but differ from the living species in several respects.     

NEW TAXODIACEOUS SEED CONES FROM THE UPPER CRETACEOUS OF NEW JERSEY

Nephrostrobus cliffwoodensis gen. et sp. nov., Nephrostrobus bifurcatus sp. nov., and Rhombostrobus cliffwoodensis gen. et sp. nov. are described based on anatomical studies of seed cone fragments from the Upper Cretaceous Magothy Formation of New Jersey. These species belong to the Taxodiaceae. As in Sequoia, Sequoiadendron. and Metasequoia, the vascular strands supplying the scale and bract in Nephrostrobus are about equal. These vascular strands are arranged in a reniform pattern resembling that found in Metasequoia, but the orientation differs by 180 degress. Nephrostrobus cliffwoodensis and Nephrostrobus bifurcatus differ from each other in the branching of the complex trace and associated resin canals. Rhombostrobus cliffwoodensis resembles Cunninghamia in the arrangement of vascular strands and associated resin canals in its bract-scale complexes. However, the relative amount of bract and ovuliferous scale making up the complex is more like that in Sequoia. This combination of cone features does not occur in any of the extant genera. Nephrostrobus and Rhombostrobus are not considered to be ancestral to any of the extant taxodiaceous genera, but are extinct members of an ancestral complex from which the extant genera were derived.     

Relict conifers from the mid-Pleistocene of Rhodes,Greece

The mid-Pleistocene Kolymbia Flora of Rhodes, Greece occurs in the Lindos Bay Clay facies group of the Rhodes Formation and was deposited in a marine setting at about a depth of 200 m. Recorded in the flora are the youngest presence of Glyptostrobus in the eastern Mediterranean, an extinct species of Pinus very similar to the modern relict Pinus canariensis, and a new species of the disjunct Cedrus. These taxa indicate that some relict plant taxa existed on Rhodes later than previously recognised. The late presence of Taxodiaceae in the eastern Mediterranean may demerit its usefulness for determining the Pliocene–Pleistocene boundary. The finding of Liquidambar, Zelkova and Fagus in the flora supports the idea of Rhodes, and possibly the eastern Mediterranean, as a refugium during the mid-Pleistocene. Similar fossil assemblages should be found in adjacent Turkey because the Lindos Bay Clay records an extensive marine transgression probably resulting from graben tectonics that lead to the ultimate separation of Rhodes from mainland Turkey.     

Early evolution in the Pinaceae

Nineteen species of structurally preserved ovulate cones of the Pinaceae are known from the Cretaceous. One of these belongs to Pinus, while the others contain anatomical features necessitating their classification in the organ genera Pityostrobus and Pseudoaraucaria. The six species of the latter group are very similar to one another and probably represent a natural, thought extinct, genus. By contrast, there is so much variety in the twelve Cretaceous species of Pityostrobus that when they are considered with respect to the uniformity of cone structure within each of the modern genera, each of the species of this organ genus may well reperesent an natural genus by itself. All expect one of these fossil forms contain features that are today characteristic of Pinus. This, combined with the Early Cretaceous occurrence of a structurally preserved Pinus cone, suggests that Pinus or something very close to it represents the phylogenetic centrum of the ancestral complex. Lack of cones showing distinct affinity with other modern genera supports this idea and further suggests that, while Pinus was in existence in the Early Cretaceous, other Recent genera of the Pinaceae may not have diverged from the complex until the Late Cretaceous or Early Tertiary.     

POROSTROBUS NATHORSTII SP. NOV.: A NEW SPECIES OF LYCOPSID CONE FROM THE EARLY PENNSYLVANIAN OF ILLINOIS

Thirty-one specimens of a small megasporangiate lycopsid cone referable to the genus Porostrobus Nathorst and abundant associated dispersed megaspores have been collected from Early Pennsylvanian strata in the Allied Stone Company quarry, Milan, Illinois. Based on other elements in the flora, the deposit is considered to be part of the Morrowan Caseyville Formation and probably of Namurian age. This is the first reported occurrence of Porostrobus in North America and the cones are recognized as a new species, P. nathorstii. The environment of deposition indicates that the cones may have been transported from the parent plant prior to preservation. Cones are preserved as coalified compressions measuring 15–36 mm long by 2.5–7 mm wide, and are characterized by an apical tuft of leaves up to 20 mm long. Sporophylls are spirally arranged on a narrow cone axis, lack a heel or keel, and have a long distal lamina. Sporangia contain a single functional megaspore tetrad. Mature megaspores are 750–1, 150 μm in diameter, have prominent trilete sutures raised to form a gula, and have numerous branched hairs confined to an equatorial band. Megaspores correspond to the dispersed form Setosisporites praetextus (Zerndt) Potonie and Kremp. Porostrobus nathorstii is the only species of the genus described to date that is monosporangiate.     

STRUCTURE AND AFFINITIES OF ATHROTAXITES BERRYI BELL,AN EARLY CRETACEOUS CONIFER

Compressions and impressions of leafy twigs, pollen cones, and seed cones of Athrotaxites berryi are abundant in certain layers of the Kootenai Formation (Aptian) in Montana and the Lower Blairmore Formation in adjacent Alberta. The twigs are densely covered by helically arranged leaves that are about 2 mm long and wide. Pollen cones are borne laterally on ultimate branch segments. Some are sessile, while others terminate a minute lateral branch. The cones are 3–4 mm in diam and about 10 mm long. Each sporophyll has a stalk that is about 0.7 mm long and an upturned laminar tip that is 1–1.5 mm long by 1 mm wide. At least two pollen sacs are attached to the abaxial side of each sporophyll. Seed cones are borne terminally on lateral branches that are often curved. These cones are about 10 mm at their widest diameter and about 15 mm long. Each bract and associated ovuliferous scale are fused to form a wedge-shaped complex that is 4–5 mm long. The complex is 0.7 mm wide at its base and expands to about 2.5 mm wide and thick near its apex. The tip of the complex narrows abruptly to a point and terminates in a spine that is about 0.5 mm long. At least one seed occurs on the adaxial side of each complex. Athrotaxites berryi belongs to the Taxodiaceae. It resembles modern Athrotaxis cupressoides but differs from it in too many aspects to be included in the modern genus.