A new technique for measurement of water permeability of stomatous cuticular membranes isolated from Hedera helix leaves

Transpiration of cuticular membranes isolated from the lower stomatous surface of Hedera helix (ivy) leaves was measured using a novel approach which allowed a distinction to be made between gas phase diffusion (through stomatal pores) and solid phase diffusion (transport through the polymer matrix membrane and cuticular waxes) of water molecules. This approach is based on the principle that the diffusivity of water vapour in the gas phase can be manipulated by using different gases (helium, nitrogen, or carbon dioxide) while diffusivity of water in the solid phase is not affected. This approach allowed the flow of water across stomatal pores ('stomatal transpiration') to be calculated separately from the flow across the cuticle (cuticular transpiration) on the stomatous leaf surface. As expected, water flux across the cuticle isolated from the astomatous leaf surface was not affected by the gas composition since there are no gas-filled pores. Resistance to flux of water through the solid cuticle on the stomatous leaf surface was about 11 times lower than cuticular resistance on the astomatous leaf surface, indicating pronounced differences in barrier properties between cuticles isolated from both leaf surfaces. In order to check whether this difference in resistance was due to different barrier properties of cuticular waxes on both leaf sides, mobility of 14C-labelled 2,4-dichlorophenoxy-butyric acid 14C-2,4-DB) in reconstituted cuticular wax isolated from both leaf surfaces was measured separately. However, mobility of 14C-2,4-DB in reconstituted wax isolated from the lower leaf surface was 2.6 times lower compared with the upper leaf side. The significantly higher permeability of the ivy cuticle on the lower stomatous leaf surface compared with the astomatous surface might result from lateral heterogeneity in permeability of the cuticle covering normal epidermal cells compared with the cuticle covering the stomatal cell surface.     

DEVELOPMENT OF THE CUTICULAR LAYERS IN ANGIOSPERM LEAVES

Schieferstein , R. H., and W. E. Loomis . (Iowa State U., Ames.) Development of the cuticular layer in angiosperm leaves. Amer. Jour. Bot. 46(9): 625–635. Illus. 1959.—The cuticularized layers of leaves and other plant surfaces consist of a primary cuticle, formed by the oxidation of oils on exposed cell walls, plus various surface and subsurface wax deposits. The primary cuticle appears to form rapidly on the walls of any living cell which is exposed to air. Surface wax is present on the mature leaves of about half of the 50 or 60 species studied. In general, wax is extruded at random through the newly formed cuticle of young leaves and accumulated in various reticulate to semicrystalline patterns. No wax pores through the cuticle or primary wall can be observed in electron-micrographs of dewaxed mature leaves. Wax accumulations on older leaves are generally subcuticular and may involve the entire epidermal wall. These deposits appear to be of considerably greater ecological significance than those on the surface. Isolated cuticular membranes from Hedera helix increased slightly in permeability to water with age of the leaf, but permeability to 2,4-D decreased 50 times. Evidence based on the patterns of cellulose in primary walls, of surface wax on growing leaves, of the appearance of the cuticle at the margins of growing epidermal cells, of the forms of the cuticle plates digested from growing and older leaves, and of the marginal location of new wax deposits on growing maize leaves is presented to support the thesis that the enlargement of the outer surface of the epidermal cells of leaves occurs at the margins of the surface. Earlier formed cuticle and wax are thus undisturbed during growth. These observations, coupled with evidence for apical growth in fibers, root hairs, etc. suggest that the primary walls of angiosperm cells are formed in specific, localized growth regions, rather than by plastic extension and apposition.     

Protecting against water loss: analysis of the barrier properties of plant cuticles

The cuticle is the major barrier against uncontrolled water loss from leaves, fruits and other primary parts of higher plants. More than 100 mean values for water permeabilities determined with isolated leaf and fruit cuticles from 61 plant species are compiled and discussed in relation to plant organ, natural habitat and morphology. The maximum barrier properties of plant cuticles exceed that of synthetic polymeric films of equal thickness. Cuticular water permeability is not correlated to the thickness of the cuticle or to wax coverage. Relationships between cuticular permeability, wax composition and physical properties of the cuticle are evaluated. Cuticular permeability to water increases on the average by a factor of 2 when leaf surface temperature is raised from 15 degrees C to 35 degrees C. Organic compounds of anthropogenic and biogenic origin may enhance cuticular permeability. The pathway taken by water across the cuticular transport barrier is reviewed. The conclusion from this discussion is that the bulk of water diffuses as single molecules across a lipophilic barrier while a minor fraction travels along polar pores. Open questions concerning the mechanistic understanding of the plant cuticular transport barrier and the role the plant cuticle plays in ensuring the survival and reproductive success of an individual plant are indicated.     

Establishment of Orthosiphon stamineus Cell Suspension Culture for Cell Growth

Callus of Orthosiphon stamineus could be induced successfully from petiole, leaf and stem tissues but not roots when cultured on MS medium containing different concentration of NAA (0–4.0 mg l^–1) and 2,4-D (0–2.0 mg l^–1). Highest fresh weight callus production was obtained from leaf explants and those with best friability were obtained on MS medium plus 1.0 mg l^–1 2,4-D plus 1.0 mg l^–1 NAA. Cell suspension cultures were established from these cultures. The appropriate cell inoculum size for the best cell growth was 0.75 g of cells in 20 ml culture medium. Cell suspension culture using MS medium supplemented with 1.0 mg l^–1 2,4-D promoted the best cell growth with maximum biomass of 8.609 g fresh weight and 0.309 g dry weight 24 days after inoculation. Cells that grew in MS medium supplemented with 1.0 mg l^–1 2,4-D reached the stationary growth phase in 15 days as compared to the cells that grew in MS medium supplemented with 1.0 mg l^–1 2,4-D + 1.0 mg l^–1 NAA reached the stationary phase in 24 days. MS medium supplemented with 1.0 mg l^–1 2,4-D was considered as the maintenance medium for maintaining the optimum cell growth of O. stamineus in the cell suspension cultures with 2-week interval subculture.     

Leaf traits variation during leaf expansion in <Emphasis Type="Italic">Quercus ilex</Emphasis> L.

The morphological, anatomical and physiological variations of leaf traits were analysed during Quercus ilex L. leaf expansion. The leaf water content (LWC), leaf area relative growth rate (RGR_l) and leaf dry mass relative growth rate (RGR_m) were the highest (76±2 %, 0.413 cm² cm⁻² d⁻¹, 0.709 mg mg⁻¹ d⁻¹, respectively) at the beginning of the leaf expansion process (7 days after bud break). Leaf expansion lasted 84±2 days when air temperature ranged from 13.3±0.8 to 27.6±0.9 °C. The net photosynthetic rate (P _N), stomatal conductance (g _s), and chlorophyll content per fresh mass (Chl) increased during leaf expansion, having the highest values [12.62±1.64 μmol (CO₂) m⁻² s⁻¹, 0.090 mol (H₂O) m⁻² s⁻¹, and 1.03±0.08 mg g⁻¹, respectively] 56 days after bud break. Chl was directly correlated with leaf dry mass (DM) and P _N. The thickness of palisade parenchyma contributed to the total leaf thickness (263.1±1.5 μm) by 47 %, spongy layer thickness 38 %, adaxial epidermis and cuticle thickness 9 %, and abaxial epidermis and cuticle thickness 6 %. Variation in leaf size during leaf expansion might be attributed to a combination of cells density and length, and it is confirmed by the significant (p<0.001) correlations among these traits. Q. ilex leaves reached 90 % of their definitive structure before the most severe drought period (beginning of June — end of August). The high leaf mass area (LMA, 15.1±0.6 mg cm⁻²) at full leaf expansion was indicative of compact leaves (2028±100 cells mm⁻²). Air temperature increasing might shorten the favourable period for leaf expansion, thus changing the final amount of biomass per unit leaf area of Q. ilex.     

Morphogenetic effects of 2,4-dichlorophenoxyacetic acid on pinto bean (Phaseolus vulgaris L.) leaf explants in vitro

Roots, callus and/or globular structures were produced on primary leaf and distal cotyledon explants of pinto bean (Phaseolus vulgaris L. cv. UI 114) cultured on semisolid MS medium with a wide range of 2,4-D concentrations (0.01 to 80 mg/L) with either 0 or 1.0 mg/L kinetin. Explants rooted at lower 2,4-D concentrations than at those favoring globule formation on callus, although roots, callus and globules often developed from the same explant. Isolated opaque green globular structures developed when callus initiated on media with 3 or more mg/L 2,4-D was subcultured in liquid MS + 30 mg/L 2,4-D. These structures multiplied with a fresh weight doubling time of 8–9 days in MS + 30 mg/L 2,4-D. Although this multiplicative behavior and opaque color were reminiscent of embryoids reported for other species, no cotyledons or roots were seen.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - KIN kinetin - MS Murashige-Skoog medium Cooperative investigations of the Agricultural Research Service, U.S. Department of Agriculture and the Michigan Agricultural Experiment Station, East Lansing, Michigan 48824. Michigan Agricultural Experiment Station Journal article No. 11923     

HORMONES AND EARLY IN VITRO DEVELOPMENT OF EPIPHYLLOUS PROPAGULES ON BRYOPHYLLUM CALYCINUM

Uniform leaf discs of Bryophyllum calycinum, each containing a single marginal notch, were explanted onto sterile media. These media contained the minerals and vitamins of Murashige and Skoog, 2% sucrose, and 1% agar. Hormones used included indoleacetic acid (IAA), gibberellic acid (GA), 2,4-dichlorophenoxyacetic acid (2,4-D), and benzylaminopurine (BAP). Explants were grown for 1 wk at which time the length of the longest leaf was measured. These observations represent the most rapid in vitro development of these isolated structures yet reported in the literature. The number of roots was also recorded and the average length of the two longest roots was calculated. BAP at concentrations of 10^-6 to 10^-8 m provided the only growth stimulation of the propagules observed, while 10^-4 m completely inhibits roots and reduces leaf development by 60% and 10^-5 m significantly decreases number and length of roots. Except at 10^-3 m, which was inhibitory, IAA had no effect on propagule leaf development. Concentrations of 10^-3 m 2,4-D induced callus and no roots, 10^-4 m induced both callus, leaves, and roots, and multiple root primordia at the notch in explants grown for 2 wk at 10^-4 m. When callus formed it never arose at a cut surface, but broke through the epidermis only at the notch of the leaf. Gibberellic acid and 2,4-D were generally inhibitory to leaf development but 10^-5 m GA significantly enhanced root length. With the exception of 10^-5 m GA, both 2,4-D and GA generally inhibit both average length of longest two roots and average number of roots. Concentrations of BAP of 10^-7 m and 10^-8 m stimulated root production as did 10^-7 m IAA and 10^-7 m 2,4-D while other concentrations of hormones used were either without effect or were inhibitory. Gibberellic acid at 10^-4 m produced leaves without any of the notches typical of this species. As the concentration of the hormone was reduced to 10^-5 m notches began to be formed and by 10^-6 and 10^-7 m normal notching was restored.     

In vitro regeneration of long spur barrenwort (Epimedium grandiflorum Morr.) from rachis explants

Summary A system for micropropagation of Epimedium grandiflorum Morr. from rachis explants was developed. Explants were cultured onto Murashige and Skoog (MS) basal salts medium supplemented with (per L) 100 mg myo-inositol, 2 mg pyridoxine-HCl, 2 mg nicotinic acid, 0.40 mg thiamine-HCl, 30 g sucrose, and 2 g Phytagel. The medium also contained 2,4-dichlorophenoxyacetic acid (2,4-D) at 0.1, 0.2, or 0.25 mg/L (0.5, 0.9, or 1.1 μM) combined with either N⁶-benzyladenine (BA) or 2-isopentenyl adenine (2ip) at 2.5, 5, or 10 mg/L (11.1, 22.2, or 44.4 μM BA or 12.3, 24.6, or 49.2 μM 2iP). Cultures were maintained at a 16-h photoperiod (40 μmol/m²/s) and 23±2° C. Callogenesis preceded shoot regeneration. Callus formation increased with higher 2,4-D concentrations. The highest percent regeneration, 83% of explants, was obtained on 10 mg BA per L (44.4 μM) combined with 0.25 mg 2,4-D per L (1.1 μM). The maximum number of shoots, 15 per explant, was obtained from explants cultured on a medium containing 0.1 mg 2,4-D per L (0.45 μM) combined with 2.5 mg BA per L (11.1 μM). Maximum shoot length, 0.4 cm, was obtained on 5 mg BA per L (22.2 μM) combined with 0.2 mg 2,4-D per L (0.9 μM). To produce whole plants, shoots were separated and rooted on hormone-free medium containing 1 g activated charcoal per L. Rachises provided an excellent source of explants for Epimedium micropropagation and proved suitable for callus production.     

IN VITRO CULTURE OF GRAIN AND VEGETABLE AMARANTHS (AMARANTHUS SPP.)

We have developed in vitro culture systems for both “grain” and “vegetable” species of the genus Amaranthus. Leaf discs and hypocotyl segments from 2- to 3-wk-old seedlings of A. hypochondriacus, A. cruentus, and A. tricolor were cultured in B5 and MS media supplemented with 2,4-dichlorophenoxyacetic acid, α-naphthaleneacetic acid, benzyladenine and zeatin in various combinations. Rapidly growing callus and abnormal roots formed on leaf discs of A. hypochondriacus and A. cruentus in the presence of 0.1-1.0 mg/l 2,4-D. At higher levels (1.0-10.0 mg/l) of 2,4-D, embryo-like structures arose from the surface and veins of the leaf discs. Shoots formed on hypocotyl-derived callus of both grain species in B5 medium + 0.1 mg/l NAA and 0.1-1.0 mg/l zeatin. Lower ratios of zeatin/NAA stimulated root formation from hypocotyl segments. Viable mesophyll protoplasts were isolated from primary leaves of all three species, with an enzyme solution of 1% Cellulysin and 0.05% Pectolyase Y-23, producing a yield of more than 10⁶ protoplasts/g fresh weight.     

Estimating near-infrared leaf reflectance from leaf structural characteristics

The relationship between near-infrared reflectance at 800 nm (NIRR) from leaves and characteristics of leaf structure known to affect photosynthesis was investigated in 48 species of alpine angiosperms. This wavelength was selected to discriminate the effects of leaf structure vs. chemical or water content on leaf reflectance. A quantitative model was first constructed correlating NIRR with leaf structural characteristics for six species, and then validated using all 48 species. Among the structural characteristics tested in the reflectance model were leaf trichome density, the presence or absence of both leaf bicoloration and a thick leaf cuticle (>1 μm), leaf thickness, the ratio of palisade mesophyll to spongy mesophyll thickness (PM/SM), the proportion of the mesophyll occupied by intercellular air spaces (%IAS), and the ratio of mesophyll cell surface area exposed to IAS (A(mes)) per unit leaf surface area (A), or A(mes)/A. Multiple regression analysis showed that measured NIRR was highly correlated with A(mes)/A, leaf bicoloration, and the presence of a thick leaf cuticle (r = 0.93). In contrast, correlations between NIRR and leaf trichome density, leaf thickness, the PM/SM ratio, or %IAS were relatively weak (r < 0.25). A model incorporating A(mes)/A, leaf bicoloration, and cuticle thickness predicted NIRR accurately for 48 species (r = 0.43; P < 0.01) and may be useful for linking remotely sensed data to plant structure and function.     

Regeneration of patchouli (Pogostemon cablin Benth.) plants from leaf and node callus, and evaluation after growth in the field

Pogostemon cablin (Benth.) is commercially important for its aromatic patchouli oil. Plants were regenerated through callus culture from leaf and nodal segments. Highest callusing was obtained from leaf explants in Murashige and Skoog (MS) medium supplemented with 3% sucrose, 0.8% bacto agar and 2 mg/L NAA + 0.5 mg/L BA. Shoot formation frequency was maximum (83%) with BA at 1.0 mg/L. Regenerated plantlets were rooted on MS medium with auxins. Maximum (90%) rooting was obtained using 0.5 mg/L NAA. Plantlets were grown for 4 weeks in this medium and then transferred to pots containing sterile sand in a moisture saturated glass chamber under laboratory conditions. The established plants were grown in pots filled with a mixture of sandsoilmanure (211) under natural daylight conditions in the field. The total leaf yield was increased in the tissue culture derived plants. These plants were dwarf and had higher specific leaf weight (leaf thickness) and leaf area compared to control plants.Abbreviations BA N⁶-Benzyladenine - 2,4-D 2,4-dichlorophenoxyacetic acid - IBA Indole-3-butyric acid - IAA Indole 3-acetic acid - MS Murashige and Skoog (1962) medium - NAA 1-Naphthaleneacetic acid     

Morphological factors of the central whorl leaf associated with leaf surface wetness and resistance in sorghum to shoot fly,Atherigona soccata*

Earlier studies showed that leaf surface water on the central whorl leaf of sorghum seedlings is associated with resistance to shoot fly. In this study, the results of an experiment to determine if leaf surface wetness (LSW) originates from atmospheric condensation or from the plant are described. Morphological structures: trichomes, stomata, leaf cuticle and quantity of surface wax of the central whorl leaf were also examined for their role in LSW production. The results suggest that LSW of the central whorl leaf originates from the plant and is not due to condensation of atmospheric moisture. The presence of trichomes was indirectly associated with LSW and resistance to shoot fly but stomatal density was not associated with LSW production. The amount of wax extracted per 100 mg of fresh weight varied significantly between genotypes and seedling age. It was more in susceptible than in resistant genotypes; however, cuticular thickness was not associated with resistance. It is suggested that LSW could be the result of some form of cuticular movement of water to the leaf surface.     

The importance of leaf cuticle for carbon economy and mechanical strength

Cuticle thickness of leaves varies >?100 times across species, yet its dry mass cost and ecological benefits are poorly understood. It has been repeatedly demonstrated that thicker cuticle is not superior as a water barrier, implying that other functions must be important. Here, we measured the mechanical properties, dry mass and density of isolated cuticle from 13 evergreen woody species of Australian forests. Summed adaxial and abaxial cuticle membrane mass per unit leaf area (CMA) varied from 2.95 to 27.4?g m(-2) across species, and accounted for 6.7-24% of lamina dry mass. Density of cuticle varied only from 1.04 to 1.24?g?cm(-3) ; thus variation in CMA was mostly due to variation in cuticle thickness. Thicker cuticle was more resistant to tearing. Tensile strength and modulus of elasticity of cuticle were much higher than those of leaf laminas, with significant differences between adaxial and abaxial cuticles. While cuticle membranes were thin, they could account for a significant fraction of leaf dry mass due to their high density. The substantial cost of thicker cuticle is probably offset by increased mechanical resistance which might confer longer leaf lifespans among evergreen species.     

Optimising the foliar uptake of zinc oxide nanoparticles: Do leaf surface properties and particle coating affect absorption?

Foliar absorption of zinc (Zn) is limited by several barriers, the first of which is the leaf cuticle. In this study, we investigated the absorption of Zn from Zn oxide nanoparticles (ZnO-NPs) in wheat (Triticum aestivum cv Gladius) and sunflower (Helianthus annuus cv Hyoleic 41) to determine the importance of NP surface coating for Zn absorption. Fourier transform infrared (FTIR) spectroscopy showed a higher polysaccharide content in the wheat cuticle than sunflower, indicated by a more pronounced glycosidic bond at 1020 cm⁻¹, but wax and cutin content were similar. Scanning electron microscopy (SEM) revealed that t richome density was twice as high in wheat (3600 ± 900 cm⁻²) as in sunflower (1600 cm⁻²) and stomatal density four times higher in sunflower (6400 ± 800 cm⁻² in wheat and 22 900 cm⁻² in sunflower). Suspensions of ZnO-NPs with coatings of different hydrophobicity were applied to leaves to compare Zn absorption using X-ray fluorescence microscopy (XFM) and inductively coupled plasma mass spectroscopy (ICP-MS). Absorption of Zn was similar between wheat and sunflower when Zn was applied at 1000 mg Zn l⁻¹, but much less Zn was absorbed from all ZnO products than from soluble Zn fertiliser. Particle coating did not affect Zn absorption, but it may facilitate particle adhesion to leaves, providing a longer-term source of resupply of Zn ions to the leaves. Differences in leaf surface characteristics did not affect Zn absorption, indicating that the cuticle is the main pathway of absorption under these conditions.     

Induction of somatic embryogenesis and genetic transformation of ohio buckeye (Aesculus glabra willd.)

Summary Mature embryo axes of the Ohio buckeye were germinated on a medium containing 1 mg gibberellic acid (GA) per 1. Three wk following germination, stem, petiole, and leaf blade tissues were excised and placed on media containing either 1 mg (4.5 μM) 2,4-dichlorophenoxy acetic acid (2,4-D) per 1, 1 mg (4.7 μM) kinetin per 1, 1 mg of both 2,4-D (4.5 μM) and kinetin (4.7 μM per 1, or 2 mg of both 2,4-D (9.1 μM) and kinetin (9.3 μM) per 1. Embryogenic tissue was formed only from stem segments after 2–3 mo. of culture on media containing both 2,4-D and kinetin. Embryogenic tissue could be either maintained on solid medium for proliferation of embryogenic callus or placed in liquid medium for proliferation of embryogenic suspension cultures. For transformation of suspension cultures, tissues were inoculated with Agrobacterium EHA105 containing the binary plasmid Vec035, briefly sonicated, and cultured in the presence of 100 μM acetosyringone for 2 d. To eliminate Agrobacterium, tissues were washed and placed in liquid proliferation medium containing either 500 mg Cefotaxime per 1 or 400 mg TimentinŖ per 1. Selection on 20 mg hygromycin per 1 was initiated 2 wk after inoculation, and after an additional 10 wk, hygromycin-resistant tissue was isolated and separately cultured. Although some hygromycinresistant clones were recovered with no sonication treatment, four to five times more clones were obtained following sonication. Putative transformed clones were confirmed to be transgenic via both histochemical β-glucuronidase (GUS) assay and southern hybridization analyses. Development of transgenic embryos occurred on a growth regulator-free medium containing 3% sucrose. After 2 mo. of embryo development, the embryos were transferred to fresh medium for germination.     

祁连圆柏针叶解剖结构对高原寒旱环境的适应性分析北大核心CSCD

祁连圆柏(Juniperus przewalskii)是青海省森林生态系统的重要组成部分,为揭示祁连圆柏对高原寒旱环境的适应特性,该研究以青海省祁连圆柏当年生针叶为研究对象,采用石蜡切片法制片,测定其叶宽、叶厚、下角质层厚、下表皮细胞厚、叶维管束木质部及韧皮部厚,并利用回归分析及偏相关分析探讨了针叶解剖结构对经纬度、海拔、坡向的响应特征。结果表明:(1)祁连圆柏针叶解剖结构在经纬度上无显著变化,其解剖结构与经纬度均无显著相关性。(2)祁连圆柏针叶解剖结构与海拔关系存在阶段性和结构间的差异性,在环境压力较小的低海拔段(<3 200 m)无显著变化;在海拔3 200 m以上,祁连圆柏叶宽、叶厚、下角质层厚、下表皮细胞厚随海拔升高而不同程度地增厚;当海拔高于3 680 m时各针叶解剖结构增长趋势变缓,尤其是叶宽、叶厚增速下降比例更大;下角质层厚和下表皮细胞厚与海拔相关性最强,其次是叶厚、叶宽,但叶维管束木质部厚以及韧皮部厚与海拔始终均未表现出显著相关性。(3)6个地区阴坡祁连圆柏针叶下角质层厚均高于阳坡,且下角质层厚与坡向显著相关。研究认为,祁连圆柏对高原寒旱环境适应性强,经纬度变化、低海拔段和阳坡的环境压力不足以使其产生相应结构变化;在阴坡其通过增厚针叶下角质层厚来提高耐寒性,在高海拔段其通过增厚下角质层、下表皮细胞层以及叶宽、叶厚来适应极寒极旱等复杂的环境压力。     

Cuticular penetration of abscisic acid

Summary Penetration of 2-¹⁴C abscisic acid (ABA) through enzymatically isolated cuticles from tomato fruit and from the upper epidermis of apricot, pear and orange leaves was assessed. Penetration was linear with time, greater as the undissociated than the dissociated ion, and greater through dewaxed than non-dewaxed cuticles. Significantly less (3–6 times) (2-¹⁴C)ABA penetrated the tomato fruit cuticle than NAA or 2,4-D. The leaf cuticles were less permeable than the tomato fruit cuticle. There was no evidence that the ABA was altered during transfer across the cuticle.     

Production of solasodine by calli from different parts of Solanum eleganifolium Cav. plants

Callus tissues from different explants (hypocotyl, cotyledon, root, leaf and fruit) of Solanum eleagnifolium Cav. were cultured on a modified Murashige-Skoog medium, with 1 mg.1^–1 2,4-D as the sole growth regulator. The presence of the alkaloid solasodine was determined by spectrophotometric and TLC methods. Its concentration ranged from 1.00 to 2.15 mg.g^–1 DW. The calli from different explants showed a direct association between the solasodine production and their growth, although they have a different production rate. It was also observed that about the seventh week of culture the metabolite concentration decreased in all cases.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - DW dry weight - TLC thin layer chromatography     

Studies on Foliar Penetration: 2. THE ROLE OF LIGHT IN DETERMINING THE PENETRATION OF 2,4 DICHLOROPHENOXYACETIC, ACID

A further study has been made of the factors determining thelevel of penetration of 2,4-dichlorophenoxyacetic acid (2,4-D)into leaves. The technique involves the use of leaf disks and2,4-D containing carbon-14 in the carboxyl group. For Phaseolus vulgaris the influence of the pH of the appliedsolution is greater in the light than in the dark. Between 0and 1,000 f.c. at 27° C there is a small increase in therate of penetration into the abaxial surface. Under these conditionsthe rates remain constant up to 56 hours. This linear relationshipholds for concentrations ranging from 100 to 1,000 mg/l, andthe rate of penetration is directly proportional to the concentration.For intensities in excess of 1,000 f.c. the light response ismarkedly different: over the first few hours there is a steadyand relatively slow rate of penetration which is followed bya second phase when the rate is greatly accelerated. This acceleratedrate can be reversed by transferring the disks to darkness,and does not take place at 1° C. Likewise, if excised disksare left for more than one hour in either the light or the darkbefore applying 2,4-D then there is subsequently no phase ofaccelerated penetration. The course of penetration into theadaxial surface exhibits no accelerated rate, and compared tothe abaxial surface the rates are lower. For leaves of Ligustrum ovalifolium, which lack stomata on theadaxial surface, the rates of penetration at 27° C intoboth surfaces remain constant in either light or darkness. Forboth the adaxial and abaxial surfaces, the rate progressivelyincreases from 0 to; 2000 f.c. and there is no phase of acceleratedpenetration. Penetration into the adaxial surface is less. At1° C the rates for both surfaces in either light or darknessare depressed. If disks of Phaseolus are irradiated with ultraviolet light,subsequent penetration is markedly depressed in the light at27° C, but in the dark or at 1° C it is enhanced. On the basis of these findings it is concluded that both physicaland metabolic factors control the rate of penetration of 2,4-DTransport through the cuticle will be dependent on adsorptionand the length of the diffusion paths. Once diffusion gradientshave been established between the surface of the cuticle andthe outer surface of the cytoplasm in the epidermal cells, thesteepness will be dependent on the rates at which 2,4-D is eitherconverted into some metabolite or moved away from the surfaceor into other cells. The relative importance of physical andmetabolic process will be dependent on the permeability andthickness of the cuticle and the level of metabolic activity.The possible role of ectodesmata in determining both the lengthand steepness of the diffusion paths is discussed.