Characterization of growth hormone-releasing hormone (GHRH) binding to cloned porcine GHRH receptor

To study structure-activity relationships of growth hormone-releasing hormone (GHRH), a competitive binding assay was developed using cloned porcine adenopituitary GHRH receptors expressed in human kidney 293 cells. Specific binding of [His¹,¹²⁵I-Tyr¹⁰,Nle²⁷]hGHRH(1–32)-NH₂ increased linearly with protein concentration (10–45 μg protein/tube). Binding reached equilibrium after 90 min at 30°C and remained constant for at least 240 min. Binding was reversible to one class of high-affinity sites (K_d = 1.04 ± 0.19 nM, B_max = 3.9 ± 0.53 pmol/mg protein). Binding was selective with a rank order of affinity (IC₅₀) for porcine GHRH (2.8 ± 0.51 nM), rat GHRH (3.1 ± 0.69 nM), [N-Ac-Tyr¹, -Arg²]hGHRH(3–29)-NH₂ (3.9 ± 0.58 nM), and [ -Thr⁷]GHRH(1–29)-NH₂ (189.7 ± 14.3 nM), consistent with their binding to a GHRH receptor. Nonhydrolyzable guanine nucleotides inhibited binding. These data describe a selective and reliable method for a competitive GHRH binding assay that for the first time utilizes rapid filtration to terminate the binding assay.     

Procedural improvements for in vitro production of viable uterine stage caprine embryos

Efforts to improve proportions of caprine immature oocytes developing into viable uterine-stage embryos in vitro involved study of 1924 oocytes in experiments designed to examine influences of fertilization media, sperm incubation temperatures, sperm treatment procedures, different protein supplementations, and different insemination intervals. Oocytecumulus complexes (OCCs) were matured during 27 h in TCM-199 supplemented with 20% FBS, 100 μg LH ml⁻¹, 0.5 μg FSH ml⁻¹, and 1 μg Estradiol-17-β ml⁻¹at 38.5 °C in a humidified 5% CO₂, 5% O₂, and 90% N₂ atmosphere. Freshly collected sperm were washed and incubated at either 22 °C or 38.5 °C for 5 h and then treated with either 0.1 μM calcium ionophore A23187 for 1 min, or with 7.35 mM calcium lactate in the presence of oocytes during the insemination interval, or with 100 μg heparin +2 mM caffeine ml⁻¹ for 15 min. The interval for insemination was experimentally varied i.e. 14 or 24 h. Results showed that: (a) when used as a fertilization medium mDM supported more blastocyst development than TALP (10.5% vs. 0%, P < 0.05); (b) incubation temperatures of 22 °C or 38.5 °C prepared goat spermatozoa equally for capacitation in mDM containing 20% FBS; (c) when oocytes were inseminated with sperm incubated in mDM with 20% FBS and capacitated with calcium lactate more embryos reached the blastocyst stage (P < 0.05) than after incubation in the same conditions but after sperm capacitation with heparin, and A23187 (31.8% vs. 24.2% and 10.2%, respectively; (d) a 24 h insemination interval was not superior to 14 h when sperm were incubated with either 20% FBS or 6 mg BSA ml⁻¹ and capacitated with calcium lactate (P > 0.05). Three morulae resulting from the best conditions in this work (FBS, calcium lactate, 14 h insemination) were transferred into the uterine horn ipsilateral to the corpus luteum of a recipient and two normal female kids were born after normal gestation. This is the first report in which it has been possible to consistently take caprine development to the blastocyst stage in vitro, and to obtain offspring following uterine transfer. Methodology reported here should facilitate implementation of new reproductive and genetic strategies in goat breeding.     

Effects of temperature, irradiance, and daylength on the marine diatom Leptocylindrus danicus Cleve. IV. Growth

Growth and dark respiration rates of the marine diatom Leptocylindrus danicus Cleve were measured in axenic batch culture under 49 combinations of temperature (5, 10, 15, 20°C), daylength(15:9, 12:12, 9:15 LD), and irradiance (at least four irradiances per daylength). Cell division rates exhibited a temperature-dependent daylength effect. Optimal temperatures occurred between 15 and 20°C. Both the initial slope () and the growth rate at light saturation (μ_max) were strongly influenced by temperature; increased five-fold and μ_max by an order of magnitude between 5 and 20°C. The compensation irradiance (I_c) was independent of temperature. μ_max was 2.7 div day⁻¹ at 20°C, 2.6 at 15°C, 1.1 at 10°C, and 0.3 at 5 °C. Cells grown under 15:9 and 12:12 LD exhibited similar growth-light curves at 20°C and at 15°C. μ_max of cells grown under 9:15 LD at these temperatures were substantially lower than μ_max under longer daylengths. Growth at 10 and 5°C was independent of daylength.

Dark respiration rates were a linear function of cell division rates at 10, 15, and 20°C, and support the concept that growth rate is dependent on dark respiration rate. These relationships were not influenced by daylength. A detectable relationship between dark respiration and growth at 5°C was not observed.

Photosynthesis and excretion showed temperature-dependent curvilinear relationships with growth rate, reflecting the lower saturation irradiance for growth compared to light saturation of photosynthesis and excretion. The relationship between Chl a-specific photosynthesis and growth was controlled by the C:Chl a ratio, which showed a positive correlation with cell division rate. At 15 and 20°C, light saturation of growth was associated with C:Chl a ratios of 40 to 60; at 5 and 10°C, cells growing at μ_max contained C:Chl a in ratios of 80 to 110.     

Doping control for metandienone using hair analyzed by gas chromatography-tandem mass spectrometry

A sensitive, specific and reproducible method for the quantitative determination of the anabolic metandienone in human hair has been developed. The preparation involved a decontamination step with methylene chloride. The hair sample (about 50 mg) was solubilised in 1 ml 1 M NaOH, 10 min at 95 degrees C, in presence of 2 ng of nandrolone-d(3) used as internal standard. The homogenate was neutralized and extracted using consecutively a solid-phase extraction (Isolute C(18) eluted with methanol) and a liquid-liquid extraction with pentane. The residue was derivatized by adding 5 microl MSTFA/NH(4)I/2-mercaptoethanol (250 microl; 5 mg; 15 microl) and 45 microl MSTFA, then incubated for 20 min at 60 degrees C. A 1 microl aliquot of derivatized extract was injected into the column (HP5-MS capillary column, 5% phenyl-95% methylsiloxane, 30 m x 0.32 mm i.d., 0.25 microm film thickness) of a Hewlett Packard (Palo Alto, CA, USA) gas chromatograph (6890 Series). Metandienone was identified using three transitions (its daughter ions at m/z 339 and 206 for the parent 444 and 191 for 206) using a Waters Quattro Micro MS-MS system. The transition m/z 444 to 206 has been used as quantification transition and the others as identification transitions. The assay was capable of detecting 2 pg/mg of metandienone when approximately 50 mg of hair material was processed. Linearity was observed for metandienone concentrations ranging from 2 to 500 pg/mg with a correlation coefficient of 0.9997. Intra-day and between-day precisions at 50 pg/mg were 13.4-16.5% and 22.0%, respectively, with an extraction recovery of 48%. The analysis of hair, cut into four segments, obtained from an athlete, revealed the presence of metandienone at the concentrations of 78, 7, 10 and 108 pg/mg in each segment of hair (0-1, 1-2, 2-3 and 3 cm to the tip).     

Characterization of proctolin binding sites on locust oviduct membranes

The binding of [³H]proctolin to oviduct membranes has been analyzed to investigate the nature of proctolin binding sites in the oviduct. Proctolin binding was found to be time dependent, proportional to concentration of membrane protein, saturable, specific and reversible. Two apparent proctolin binding sites were recognized. The first had a K_d of 400 ± 82 nM and a B_max of 23.7 ± 6.7 pmol/mg protein. The second had a K_d of 2.4 ± 0.2 μM and a B_max of 96.3 ± 16.7 pmo/mg protein.

Binding was specific in thatcompetition experiments with a wide range of peptides showed that only Arg-Tyr-Leu-Pro-Ala was an effective competitor at μM concentrations. All other peptides examined weekly reduced proctolin binding at concentrations above 50 μM. Certain peptides were found to potentiate [³]pproctolin binding at low μM concentrations (1–10 μM) and to inhibit proctolin binding at higher concentrations. The significance of these findings is discussed.     

Cortisol metabolism in vitro—III. Inhibition of microsomal 6β—hydroxylase and cytosolic 4-ene-reductase

The in vitro metabolism of cortisol in human liver fractions is highly complex and variable. Cytosolic metabolism proceeds predominantly via A-ring reduction (to give 3,5β-tetrahydrocortisol; 3,5β-THF), while microsomal incubations generate upto 7 metabolites, including 6β-hydroxycortisol (6β-OHF), and 6β-hydroxycortisone (6β-OHE), products of the cytochrome P450 (CYP) 3A subfamily. The aim of the present study was, therefore, to examine two of the main enzymes involved in cortisol metabolism, namely, microsomal 6β-hydroxylase and cytosolic 4-ene-reductase. In particular, we wished to assess the substrate specificity of these enzymes and identify compounds with inhibitory potential. Incubations for 30 min containing [³H]cortisol, potential inhibitors, microsomal or cytosolic protein (3 mg), and co-factors were followed by radiometric HPLC analysis. The K_m value for 6β-OHF and 6β-OHE formation was 15.2 ± 2.1 μM (mean ± SD; n = 4) and the V_max value 6.43 ± 0.45 pmol/min/mg microsomal protein. The most potent inhibitor of cortisol 6β-hydroxylase was ketoconazole (K_i = 0.9 ± 0.4 μM; N = 4), followed by gestodene (K_i = 5.6 ± 0.6 μM) and cyclosporine (K_i = 6.8 ± 1.4 μM). Both betamethasone and dexamethasone produced some inhibition (K_i = 31.3 and 54.5 μ, respectively). However, substrates for CYP2C (tolbutamide), CYP2D (quinidine), and CYP1A (theophylline) were essentially non-inhibitory. The K_m value for cortisol 4-ene-reductase was 26.5 ± 11.2 μM (n = 4) and the V_max value 107.7 ± 46.0 pmol/min/mg cytosolic protein. The most potent inhibitors were androstendione (K_i = 17.8 ± 3.3 μM) and gestodene (K_i = 23.8 ± 3.8 μM). Although both compounds have identical A-rings to cortisol, and undergo reduction, inhibition was non-competitive.     

Thermal biology of the fossorial rodent Ctenomys fulvus from the Atacama desert, northern Chile

The Andean tuco-tuco, Ctenomys fulvus (Rodentia: Ctenomyidae) inhabits one of the most arid regions of the world, the Salar de Atacama, Northeast of Antofagasta, Chile (23°17′06″S, 68°05′43″W; 2.240 m.a.s.l). We found that a stable microclimate in burrows, a low evaporative water loss (EWL), and a diet of roots (59% water content) are the main factors that permit the survival of this fossorial species in harsh desert conditions. Large circadian variation in T_a was observed above ground. Daily ΔT_a (T_a max − T_a min) = 37.9±0.2°C in summer and in winter. In contrast, circadian variation of T_a inside the burrows was only 5.8±0.5°C in the same seasons. Relative humidity (RH) was 1.9–3.1% during the day, increasing to maximum values of 27% at night and early morning. Inside the burrows RH was higher and quite stable, ranging between 53.1 and 65%, independent of the time of day and season. EWL, measured between 10 and 25°C, was low (1.26 mg/g h), and a moderate increase of 13–20% was observed at higher temperatures. The low EWL may prevent dehydration. However, because of the low heat loss capability, animals became hyperthermic (0.8–1.6°C) in dry air at T_a=30–35°C. As T_a during afternoon normally exceeded 35°C, the microclimate of burrows provided the only way to avoid the lethal effects of hyperthermia.     

The response of intact Strongyloides ratti infective (L3) larvae to substrates and inhibitors of respiratory electron transport.

Live, intact third-stage larvae (L3s) of Strongyloides ratti in the absence of exogenous substrates consumed oxygen at a rate (E-QO₂) of 181.8 ± 12.4 ng atoms min⁻¹ mg dry weight⁻¹ at 35°C. Respiratory electron transport (RET) Complex I inhibitor rotenone (2 μ ) produced 33 ± 6.5% inhibition of the E-QO₂. Unusually the rotenone-induced inhibition was not relieved by 5 μ -succinate. The E-QO₂ of intact L3s was refractory to RET Complex III inhibitor antimycin A at 2 μ ; 4 μ -antimycin inhibited ≤ 10% of the E-QO₂. The electron donor couple ascorbate/TMPD augmented the E-QO₂ in the presence of rotenone (2 μ ) and antimycin A (4 μ ) by 110%. Azide (1 m ) stimulated the antimycin A refractory QO₂ by 36.6 ± 7.2% which was only partially inhibited by 1.0 m -KCN ( ). The data suggest the presence of classical (CPW) and alternate (APW) electron transport pathways in S. ratti L3s.     

Hair analysis for drugs of abuse XIX. Determination of ephedrine and its homologs in rat hair and human hair

A sensitive GC-MS method was developed for the quantitative analysis of ephedrine (EP), phenylpropanolamine (PPA) and methylephedrine (ME) in animal and human hair. After washing with 0.1% sodium dodecyl sulfate, hair samples (10 mg) were added with deuterated internal standards, extracted by 1-h sonication and over night soaking in 2 ml of 5 M HCl-methanol (1:20) at room temperature. Following evaporation of the liquid phase, the residue was dissolved in phosphate buffer solution (pH 6.0) and purified using a solid-phase extraction procedure with Bond Elut Certify columns. Two types of derivatization were compared - using trifluoroacetic anhydride (TFAA) and pentafluoropropionic anhydride (PFPA) - for discrimination of EP and methamphetamine (MA). Derivatized extracts were analyzed by GC-MS in the EI mode using a capillary column (OV-1 equivalent). From the results comparing three GC-MS conditions, PFP-derivatives separated with a temperature gradient of 20°C/min from 60°C to 280°C gave the best resolution between EP and MA. ME was analyzed as a trimethylsilyl derivative using N,O-bis-trimethylsilyl acetamide at the above GC condition. The assay was linear from 0.5 to 50 ng/mg (r=0.998) and capable of detecting less than 50 pg of derivatized EP, PPA and ME on-column. Intra-assay precision was characterized by C.V. values from 5 to 16% in the concentration range of 1–10 ng/mg hair. The method was used for the quantitative determination of EP, PPA and ME in the hair obtained from three rats with dark brown hair after ten intraperitoneal injections (5 mg/kg/day) of the three drugs and from three male and one female volunteers with black hair after an oral dose of 50 mg/day of EP-HCl for three days. Hair samples were collected by shaving from the back of rats and cutting from the scalp of humans 28 days after the first dose. The incorporation rates of EP, PPA and ME into hair (the ratios of [hair concentration] to [AUC]) obtained from the animal experiment were 0.10, 0.07 and 0.03, respectively, which are a little lower than those (0.14, 0.10 and 0.04) of their desoxy-compounds, MA, amphetamine and dimethylamphetamine. EP was detected at an average of 2.25 ng/mg (n=4) in human scalp hair and at a range of 1–29 ng/mg (n=3) in human beard hair until day 14, but its metabolite (PPA) was at a trace level in the hair of the four subjects. The method was successfully used for detection of ME and EP in the hair of a neonate and its mother who was abusing Bron syrup containing ME during the pregnancy.     

Influence of phosphorus concentration on the growth kinetics and stoichiometry of the microalga Scenedesmus obliquus

The growth of the freshwater microalga Scenedesmus obliquus was studied at 30°C in a mineral culture medium with phosphorus concentrations of between 0 and 372 μ . The values for the specific growth rates, between and , fitted a semistructured substrate-limitation model with μ_m1 = 0·0466 h⁻¹, μ_m2 = 0·0256 h⁻¹ and . The specific uptake rate of phosphorus reached a maximum value of q_Sm1 = 658·01 × 10⁻⁴ μmol P mg⁻¹ biomass h⁻¹.     

Doping control for methenolone using hair analysis by gas chromatography-tandem mass spectrometry

A sensitive, specific and reproducible method for the quantitative determination of methenolone in human hair has been developed. The sample preparation involved a decontamination step of the hair with methylene chloride. The hair sample (about 100 mg) was solubilized in 1 ml 1 M NaOH, 15 min at 95 degrees C, in presence of 1 ng testosterone-d3 used as internal standard. The homogenate was neutralized and extracted using consecutively a solid-phase (Isolute C18 eluted with methanol) and a liquid-liquid (pentane) extraction. The residue was derivatized by adding 50 microl MSTFA-NH4I-2-mercaptoethanol (1000:2:5, v/v/v), then incubated for 20 ml at 60 degrees C. A 1.5-microl aliquot of the derivatized extract was injected into the column (HP5-MS capillary column, 5% phenyl-95% methylsiloxane, 30 m x 0.25 mm I.D., 0.25 microm film thickness) of a Hewlett-Packard (Palo Alto, CA, USA) gas chromatograph (6890 Series). Methenolone was detected by its parent ion at m/z 446 and daughter ions at m/z 208 and 195 through a Finnigan TSQ 700 MS-MS system. The assay was capable of detecting 1 pg/mg of methenolone when approximately 100 mg hair material was processed. Linearity was observed for methenolone concentrations ranging from 2 to 100 pg/mg with a correlation coefficients of 0.965-0.981. Intra-day and between-day precisions at 2, 10 and 25 pg/mg were 10.9-14.1% and 13.7-16.8%, respectively, with an extraction recovery of 97.6%. The analysis of a strand of hair obtained from two bodybuilders, revealed the presence of methenolone at the concentrations of 7.3 and 8.8 pg/mg.     

Vinyl imidazole carrying metal-chelated beads for reversible use in yeast invertase adsorption

Poly(ethylene glycol dimethacrylate-n-vinyl imidazole) [poly(EGDMA–VIM)] hydrogel (average diameter 150–200 μm) was prepared copolymerizing ethylene glycol dimethacrylate (EGDMA) with n-vinyl imidazole (VIM). Poly(EGDMA–VIM) beads had a specific surface area of 59.8 m²/g. Poly(EGDMA–VIM) beads were characterized by swelling studies and scanning electron microscope (SEM). Cu²⁺ ions were chelated on the poly(EGDMA–VIM) beads (452 μmol Cu²⁺/g), then the metal-chelated beads were used in the adsorption of yeast invertase in a batch system. The maximum invertase adsorption capacity of the poly(EGDMA–VIM)–Cu²⁺ beads was observed as 35.2 mg/g at pH 4.5. The adsorption isotherm of the poly(EGDMA–VIM)–Cu²⁺ beads can be well fitted to the Langmuir model. Adsorption kinetics data were tested using pseudo-first- and -second-order models. Kinetic studies showed that the adsorption followed a pseudo-second-order reaction. The value of the Michaelis constant K_m of invertase was significantly larger upon adsorption, indicating decreased affinity by the enzyme for its substrate, whereas V_max was smaller for the adsorbed invertase. The optimum temperature for the adsorbed preparation of poly(EGDMA–VIM)–Cu²⁺-invertase at 50 °C, 10 °C higher than that of the free enzyme at 40 °C. Storage stability was found to increase with adsorption. Adsorbed invertase retains an activity of 82% after 10 batch successive reactions, demonstrating the usefulness of the enzyme-loaded beads in biocatalytic applications.     

Photosynthetic response of Myriophyllum salsugineum A.E. orchard to photon irradiance, temperature and external free CO2

The photosynthetic capacity of Myriophyllum salsugineum A.E. Orchard was measured, using plants collected from Lake Wendouree, Ballarat, Victoria and grown subsequently in a glasshouse pond at Griffith, New South Wales. At pH 7.00, under conditions of constant total alkalinity of 1.0 meq dm⁻³ and saturating photon irradiance, the temperature optimum was found to be 30–35°C with rates of 140 μmol mg⁻¹ chlorophyll a h⁻¹ for oxygen production and 149 μmol mg⁻¹ chlorophyll a h⁻¹ for consumption of CO₂. These rates are generally higher than those measured by other workers for the noxious Eurasian water milfoil, Myriophyllum spicatum L., of which Myriophyllum salsugineum is a close relative. The light-compensation point and the photon irradiance required to saturate photosynthetic oxygen production were exponentially dependent on water temperature. Over the temperature range 15–35°C the light-compensation point increased from 2.4 to 16.9 μmol (PAR) m⁻² s⁻¹ for oxygen production while saturation photon irradiance increased from 41.5 to 138 μmol (PAR) m⁻² s⁻¹ for oxygen production and from 42.0 to 174 μmol (PAR) m⁻² s⁻¹ for CO₂ consumption. Respiration rates increased from 27.1 to 112.3 μmol (oxygen consumed) g⁻¹ dry weight h⁻¹ as temperature was increased from 15 to 35°C. The optimum temperature for productivity is 30°C.     

Exercise in the heat: Effects of dinitrophenol administration

1. 1.|Dinitrophenol (DNP) was administered to rats in two equal dosages (20 mg/kg, 30 min interval); the second injection was followed immediately by exercise (9.14 m/min) in the heat (30°C) or at room temperature (21°C).

2. 2.|At 21°C control (saline-treated) rats manifested a mean endurance of 94 min which was reduced to 32 min among DNP-treated animals.

3. 3.|At 30°C, control rats ran for 65 min (δT_re/min = 0.05°C) while DNP-treated animals had a mean endurance of only 12 min (δT_re/min = 0.22°C).

4. 4.|DNP-treated rats (30°C) manifested no decrements in tail-skin heat loss (δT_sk/min = 0.17°C vs 0.10°C) or saliva secretion (0.78 g/min, DNP vs. 0.19 g/min, control) for their brief treadmill duration.

5. 5.|The increased metabolic heat production of DNP severely reduced performance.

Growth of a methanol-utilizing yeast

A halophilic thermotolerant yeast species, identified as Hansenula polymorpha Morais et Maia, was isolated from a mixed culture obtained from sea-water from the Arabian Gulf. The species grew on methanol at 25–42°C, pH 3.5–6.7, and in a medium compounded with 75% sea-water. Either thiamin HCl and biotin or yeast extract proved essential for growth. In shake flask studies a depression of the yield was observed when methanol concentration increased; at concentrations in excess of 0.1%, v/v, inhibition of growth also occurred. In a batch culture grown in a 14 l fermenter, the values of T_d, μ and Y_s were found to be 3 h, 0.23 h⁻¹ and 0.38, respectively.     

Analysis of anabolic steroids in human hair using LC-MS/MS

New highly sensitive, specific, reliable, reproducible and robust LC-MS/MS methods were developed to detect the anabolic steroids, nandrolone and stanozolol, in human hair for the first time. Hair samples from 180 participants (108 males, 72 females, 62% athletes) were screened using ELISA which revealed 16 athletes as positive for stanozolol and 3 for nandrolone. Positive samples were confirmed on LC-MS/MS in selective reaction monitoring (SRM) mode. The assays for stanozolol and nandrolone showed good linearity in the range 1-400 pg/mg and 5-400 pg/mg, respectively. The methods were validated for LLOD, interday precision, intraday precision, specificity, extraction recovery and accuracy. The assays were capable of detecting 0.5 pg stanozolol and 3.0 pg nandrolone per mg of hair, when approximately 20 mg of hair were processed. Analysis using LC-MS/MS confirmed 11 athletes’ positive for stanozolol (5.0 pg/mg to 86.3 pg/mg) and 1 for nandrolone (14.0 pg/mg) thus avoiding false results from ELISA screening. The results obtained demonstrate the application of these hair analysis methods to detect both steroids at low concentrations, hence reducing the amount of hair required significantly. The new methods complement urinalysis or blood testing and facilitate improved doping testing regimes. Hair analysis benefits from non-invasiveness, negligible risk of infection and facile sample storage and collection, whilst reducing risks of tampering and cross-contamination. Owing to the wide detection window, this approach may also offer an alternative approach for out-of-competition testing.     

Quantitative determination of the macrolide antibiotics erythromycin, roxithromycin, azithromycin and clarithromycin in human serum by high-performance liquid chromatography using pre-column derivatization with 9-fluorenylmethyloxycarbonyl chloride and fluorescence detection

A validated, highly sensitive and precise high-performance liquid chromatographic (HPLC) method for the determination of the macrolides erythromycin, azithromycin, clarithromycin and roxithromycin in human serum is described. A diethyl ether extract, obtained from serum using a saturated sodium carbonate solution, was treated with 9-fluorenylmethyloxycarbonyl chloride (FMOC–Cl) for 40 min at 40°C and chromatographed on a base-deactivated octadecyl column, maintained at 50°C during elution, using an eluent composed of acetonitrile–hydrogenphosphate buffer, pH 7.5, with 0.125% triethylamine (3:2, v/v). Fluorescence detection was used at an excitation wavelength of 255 nm and an emission wavelength of 315 nm. Erythromycin, clarithromycin, roxithromycin and azithromycin were found to have retention times of 8.8, 15.7, 17.1 and 20.7 min, respectively. Recoveries ranging from 93 to 104% were found with reproducibility coefficients of variation of 1.1–5%. Mean correlation coefficients of 0.9997, 0.9998, 0.9996 and 0.9994 were found for the linear calibration curves (n=2) of erythromycin (0.320–16.1 mg/l), roxithromycin (3.24–19.4 mg/l), clarithromycin (0.190–19.4 mg/l) and azithromycin (0.0988–4.94 mg/l), respectively.     

Effect of tropisetron versus placebo on cold-induced oxygen consumption and shivering in male volunteers

In a prospective, randomized, cross-over, placebo-controlled study in healthy male volunteers, we tested the effect of the 5-HT₃ antagonist tropisetron on cold-induced oxygen consumption and shivering.

Cooling was performed by intravenous infusion of isotonic salt solution at 4 °C. Whole-body oxygen consumption (VO₂) was measured with a metabolic monitor. Shivering was qualitatively assessed. When the shivering score evaluated “2” (intense shivering), 5 mg tropisetron or NaCl 0.9% was injected and repeated if necessary, to completely stop shivering.

The VO₂ before shivering (178±9 ml/min/m²) rose significantly during shivering (291±21 ml/min/m²). 5 mg of tropisetron in 2 volunteers and 10 mg in 3 volunteers stopped shivering but it returned (grade 0–1). The VO₂ decreased significantly (209±17 ml/min/m²). Placebo had no effect.

Tropisetron reduced cold-induced VO₂ and intensity of hypothermic shivering. That an additional dose of tropisetron could not stop the shivering totally may indicate that the effect of tropisetron is not dose dependent.     

Investigation of the transport of intact glutathione in human and rat type II pneumocytes

The aim of the study was to investigate whether there is transmembrane transport of intact glutathione ([³H]-GSH, 0.1 μCi) in rat and human type II pneumocytes (T2P), and if this transport might be dependent on the redox state of the extracellular fluid. The T2P were pretreated with acivicin (250 μM) to inhibit γ-glutamyl-transferase activity and with L-buthionine-[SR]-sulfoximine (1 mM) to inhibit intracellular GSH synthesis. After 48 h in culture, initial GSH influx rate was 0.70 ± 0.20 nmol/min/mg protein (37°C) and 0.35 ± 0.04 nmol/min/mg protein (4°C) during the first 5 min in rat T2P. In human T2P, the initial GSH influx rate was 0.36 ± 0.30 nmol/min/mg protein (37°C) and 0.32 ± 0.06 nmol/min/mg protein (4°C) during the first 10 min. Thereafter no further influx was found. The influx of 1 mM GSH in freshly isolated rat and human T2P in suspension was 2.3 ± 0.3 and 1.2 ± 0.3 nmol/mg protein after 15 min at 37°C, and 2.8 ± 0.2 and 1.0 ± 0.3 nmol/mg protein at 4°C, respectively. When GSH influx was studied at different concentrations between 0 and 40 mM, a linear increase without saturation or difference between 37°C and 4°C was found. Preexposure to ouabain had no effect on GSH influx. Efflux of GSH was stimulated and influx inhibited by preexposure of the cells to reduced thiols, while disulphides inhibited efflux and favoured inward uptake. Thus, in human and rat T2P a GSH-carrier exists which operates as an effluxer. At GSH concentrations in the physiological range no uptake is seen, but some uptake can be observed at GSH concentrations above normal physiological levels. The uptake appears to be energy-independent and non-saturable. Efflux of GSH is stimulated and influx inhibited by reduced thiols, while disulphides inhibit the efflux and favour inward uptake. GSH uptake in T2P thus may depend on concentration gradients and driving forces, such as the redox state of the extracellular fluid.     

Competitive product inhibition of aromatase by natural estrogens

In order to better understand the function of aromatase, we carried out kinetic analyses to asses the ability of natural estrogens, estrone (E₁), estradiol (E₂), 16-OHE₁, and estriol (E₃), to inhibit aromatization. Human placental microsomes (50 μg protein) were incubated for 5 min at 37°C with [1β-³H]testosterone (1.24 × 10³ dpm ³H/ng, 35–150 nM) or [1β-³H,4-¹⁴C]androstenedione (3.05 × 10³ dpm ³H/ng, ³H/¹⁴C = 19.3, 7–65 nM) as substrate in the presence of NADPH, with and without natural estrogens as putative inhibitors. Aromatase activity was assessed by tritium released to water from the 1β-position of the substrates. Natural estrogens showed competitive product inhibition against androgen aromatization. The K_i of E₁, E₂, 16-OHE₁, and E₃ for testosterone aromatization was 1.5, 2.2, 95, and 162 μM, respectively, where the K_m of aromatase was 61.8 ± 2.0 nM (n = 5) for testosterone. The K_i of E₁, E₂, 16-OHE₁, and E₃ for androstenedione aromatization was 10.6, 5.5, 252, and 1182 μM, respectively, where the K_m of aromatase was 35.4 ± 4.1 nM (n = 4) for androstenedione. These results show that estrogens inhibit the process of andrigen aromatization and indicate that natural estrogens regulate their own synthesis by the product inhibition mechanism in vivo. Since natural estrogens bind to the active site of human placental aromatase P-450 complex as competitive inhibitors, natural estrogens might be further metabolized by aromatase. This suggests that human placental estrogen 2-hydroxylase activity is catalyzed by the active site of aromatase cytochrome P-450 and also agrees with the fact that the level of catecholestrogens in maternal plasma increases during pregnancy. The relative affinities and concentration of androgens and estrogens would control estrogen and catecholestrogen biosynthesis by aromatase.