Stirring and biomass starter influences the anaerobic digestion of different substrates for biogas production

Here, we present the results of lab‐scale experiments conducted in a batch mode to determine the biogas yield of lipid‐rich waste and corn silage under the effect of stirring. Further semi‐continuous experiments were carried out for the lipid‐rich waste with/without stirring. Additionally, it was analyzed how the starter used for the batch experiment influences the digestion process. The results showed a significant stirring effect on the anaerobic digestion only when seed sludge from a biogas plant was used as a starter. In this case, the experiments without stirring yielded only about 50% of the expected biogas for the investigated substrates. The addition of manure slurry to the batch reactor as part of the starter improved the biogas production. The more diluted media in the reactor allowed a better contact between the bacteria and the substrates making stirring not necessary.     

Biostimulation of anaerobic digestion using nanomaterials for increasing biogas production

Reviews in Environmental Science and Bio/Technology - Biomass energy, especially biogas production, is a renewable and sustainable form of energy. Biogas is becoming more important due to its...     

Model-based predictions of anaerobic digestion of agricultural substrates for biogas production

A modified Anaerobic Digestion Model No. 1 (ADM1), calibrated on a laboratory digester with a feeding mix of 30% weight of cow manure and 70% weight of corn silage, was implemented, showing its performances of simulation as a decision-making and planning-supporting tool for the anaerobic digestion of agricultural substrates. The virtual fermenter obtained was used to conduct simulations with different feeding compositions and loading rates of cow manure, corn silage, grass silage and rape oil. All simulations were started at the same initial state which was represented by a steady state with an organic loading rate of 2.5 kg ODM/(). The effects of the different feeding combinations on biogas composition and biogas yield were predicted reasonably, and partly verified with the available literature data. Results demonstrated that the simulations could be helpful for taking decisions on agricultural biogas plant operation or experimental set-ups, if used advisedly.     

Adaptive identification of anaerobic digestion process for biogas production management systems

Bioprocess and Biosystems Engineering - To achieve the goals of sustainable development, supplies of renewable energy must be increased and methods of stable production developed. This study...     

Application of next-generation sequencing methods for microbial monitoring of anaerobic digestion of lignocellulosic biomass

The anaerobic digestion of lignocellulosic wastes is considered an efficient method for managing the world’s energy shortages and resolving contemporary environmental problems. However, the recalcitrance of lignocellulosic biomass represents a barrier to maximizing biogas production. The purpose of this review is to examine the extent to which sequencing methods can be employed to monitor such biofuel conversion processes. From a microbial perspective, we present a detailed insight into anaerobic digesters that utilize lignocellulosic biomass and discuss some benefits and disadvantages associated with the microbial sequencing techniques that are typically applied. We further evaluate the extent to which a hybrid approach incorporating a variation of existing methods can be utilized to develop a more in-depth understanding of microbial communities. It is hoped that this deeper knowledge will enhance the reliability and extent of research findings with the end objective of improving the stability of anaerobic digesters that manage lignocellulosic biomass.     

Linking pyrolysis and anaerobic digestion (Py-AD) for the conversion of lignocellulosic biomass

1. Download : Download high-res image (261KB)
2. Download : Download full-size image

     

Land cover changes with the development of anaerobic digestion for biogas production in France

Anaerobic digestion is developing in various countries worldwide to produce renewable energy. In addition, the resulting digestates provide readily available nutrients when applied to cropping systems as fertilizers. The introduction of a biogas plant on a farm can induce land cover changes, in relation to the production of feedstock for the biogas plant and/or to the modification of the farming system. The aim of this study was therefore to characterize and quantify the land cover changes in farms associated with biogas plants in France. We combined two national spatialized databases: the Land Parcel Identification System (yearly French land cover at the parcel scale with farm identifier per parcel) and the SINOE database (biogas plant location and year of start-up). We showed that, on average, the changes were limited, with an increase in maize areas (+3.4% of the total farm areas) compensated by a decrease in wheat and rapeseed areas (−1.8% and −1.9%, respectively), but with a certain variability. The French regulation and market limiting the use of dedicated energy crops seems to have limited land cover changes in France compared to other countries. However, we elaborated a typology of land cover changes and characterized five clusters of farms across the country. The main one (67% of the farms) corresponded to unchanged land cover after the introduction of a biogas plant. The four other clusters showed contrasting changes, for example, an increase or a decrease in grassland areas, a strong increase in maize areas, or a replacement of winter wheat by winter barley. The diversity and the driving factors behind these changes deserve to be better studied and understood through further farmer surveys.     

Impact of pretreatment on solid state anaerobic digestion of yard waste for biogas production

Solid state anaerobic digestion, as a safe and environment-friendly technology to dispose municipal solid wastes, can produce methane and reduce the volume of wastes. In order to raise the digestion efficiency, this study investigated the pretreatment of yard waste by thermal or chemical method to break down the complex lignocellulosic structure. The composition and structure of pretreated yard waste were analyzed and characterized. The results showed that the pretreatment decreased the content of cellulose and hemicelluloses in yard waste and in turn improved the hydrolysis and methanogenic processes. The thermal pretreatment sample (P1) had the highest methane yield, by increasing 88 % in comparison with digesting the raw material. The maximum biogas production reached 253 mL/g volatile solids (VS). The largest substrate mass reduction was obtained by the alkaline pretreatment (P5). The VS of the alkaline-treated sample decreased about 60 % in comparison with the raw material.     

Ethanol production from lignocellulosic biomass of energy cane

Ethanol produced from lignocellulosic biomass is a renewable alternative to diminishing petroleum based liquid fuels. The release of many new sugarcane varieties by the United States Department of Agriculture to be used as energy crops is a promising feedstock alternative. Energy cane produces large amounts of biomass that can be easily transported, and production does not compete with food supply and prices because energy cane can be grown on marginal land instead of land for food crops. The purpose of this study was to evaluate energy cane for lignocellulosic ethanol production. Energy cane variety L 79-1002 was pretreated with weak sulfuric acid to remove lignin. In this study, 1.4 M sulfuric acid pretreated type II energy cane had a higher ethanol yield after fermentation by Klebsiella oxytoca without enzymatic saccharification than 0.8 M and 1.6 M sulfuric acid pretreated type II energy cane. Pretreated biomass was inoculated with K. oxytoca for cellulose fermentation and Pichia stipitis for hemicellulose fermentation under simultaneous saccahrification and fermentation (SSF) and separate hydrolysis and fermentation (SHF) conditions. For enzymatic saccharification of cellulose, the cellulase and ??-glucanase cocktail significantly increased ethanol production compared to the ethanol production of fermented acid pretreated energy cane without enzymatic saccharification. The results revealed that energy cane variety L 79-1002 produced maximum cellulosic ethanol under SHF (6995 mg/L) and produced 3624 mg/L ethanol from fermentation of hemicellulosic sugars.     

添加厨余垃圾对剩余污泥厌氧消化产沼气过程的影响

为提高剩余污泥厌氧消化的沼气产量和甲烷含量,研究了厨余垃圾的不同添加量对剩余污泥厌氧消化性能的影响。结果表明,在35℃下,随着剩余污泥中厨余垃圾添加量的增加,厌氧消化系统中碳氮质量比（C／N）、胞外多聚物（EPS）等生理生化指标均有不同程度的改善。其中当剩余污泥与厨余垃圾质量比为2：1时,混合有机废弃物中沼气产量和甲烷含量均达到最大值,每克挥发性固体（VS）产生了156．56mL沼气,甲烷体积分数为67．52％,分别比剩余污泥单独厌氧消化时的产气量提高了5倍和1．5倍。     

Potential errors in the quantitative evaluation of biogas production in anaerobic digestion processes

Errors that are commonly made in the quantification of biogas from anaerobic digestion experiments were investigated.For liquid displacement gasometers where a barrier solution separates the biogas and the atmosphere, inaccuracy due to gas diffusion was examined experimentally. Acidified saturated saline solution was the most suitable barrier solution, as biogas characteristics changed least with time. Using acidified or tap water caused considerable biogas losses and should therefore be avoided where biogas is stored before measurement.Errors associated with volume calculation from three common liquid displacement gasometer types were investigated theoretically. Corrections that must be made to obtain gas volumes at standard temperature and pressure when using this equipment are discussed. Regarding experimental errors, gasometer designs where displaced liquid is weighed to determine the volume are the most versatile since errors depend mainly upon balance sensitivity. Using liquid heights to calculate volume requires appropriate sizing of the gasometer relative to the volume of gas measured.The calibration of a low flow gas meter was investigated and an approximately linear variation with flow rate was found; hence in situ calibration is advised for this type of instrument. Correction for atmospheric conditions should be performed in real time to reduce errors.     

Development of biocatalysts for production of commodity chemicals from lignocellulosic biomass

Lignocellulosic biomass is recognized as potential sustainable source for production of power, biofuels and variety of commodity chemicals which would potentially add economic value to biomass. Recalcitrance nature of biomass is largely responsible for the high cost of its conversion. Therefore, it is necessary to introduce some cost effective pretreatment processes to make the biomass polysaccharides easily amenable to enzymatic attack to release mixed fermentable sugars. Advancement in systemic biology can provide new tools for the development of such biocatalysts for sustainable production of commodity chemicals from biomass. Integration of functional genomics and system biology approaches may generate efficient microbial systems with new metabolic routes for production of commodity chemicals. This paper provides an overview of the challenges that are faced by the processes converting lignocellulosic biomass to commodity chemicals. The critical factors involved in engineering new microbial biocatalysts are also discussed with more emphasis on commodity chemicals.     

The future of anaerobic digestion and biogas utilization

One of the common tendencies of animal production activities in Europe and in developed countries in general is to intensify the animal production and to increase the size of the animal production units. High livestock density is always accompanied by production of a surplus of animal manure, representing a considerable pollution threat for the environment in these areas. Avoiding over-fertilization is not only important for environmental protection reasons but also for economical reasons. Intensive animal production areas need therefore suitable manure management, aiming to export and to redistribute the excess of nutrients from manure and to optimize their recycling.     

生物强化技术在生物质沼气制备过程中的应用及研究进展

生物强化技术通过为特定的生物过程"设计"微生物,进而作为一种提升反应系统活力和性能的手段被应用于生物质沼气制备过程,以便加快发酵系统启动时间、增加原料利用率、缩短酸败系统的恢复时间、降低高有机负荷的抑制作用等。本文针对以木质纤维素为原料的沼气制备中的生物强化技术,从生物强化菌剂的构建及标准、生物强化作用的影响因素、生物强化作用机制的探究等几个方面来阐述目前国内外生物强化技术在生物质沼气制备过程中的应用与研究进展,以及存在的问题和解决方案。     

Recent advances in production of succinic acid from lignocellulosic biomass

Production of succinic acid via separate enzymatic hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) are alternatives and are environmentally friendly processes. These processes have attained considerable positions in the industry with their own share of challenges and problems. The high-value succinic acid is extensively used in chemical, food, pharmaceutical, leather and textile industries and can be efficiently produced via several methods. Previously, succinic acid production via chemical synthesis from petrochemical or refined sugar has been the focus of interest of most reviewers. However, these expensive substrates have been recently replaced by alternative sustainable raw materials such as lignocellulosic biomass, which is cheap and abundantly available. Thus, this review focuses on succinic acid production utilizing lignocellulosic material as a potential substrate for SSF and SHF. SSF is an economical single-step process which can be a substitute for SHF — a two-step process where biomass is hydrolyzed in the first step and fermented in the second step. SSF of lignocellulosic biomass under optimum temperature and pH conditions results in the controlled release of sugar and simultaneous conversion into succinic acid by specific microorganisms, reducing reaction time and costs and increasing productivity. In addition, main process parameters which influence SHF and SSF processes such as batch and fed-batch fermentation conditions using different microbial strains are discussed in detail.