不同方法检测鸡蛋表面菌落总数的相关性研究

研究了ATP生物荧光检测法与国标法《GB4789.2-2010食品卫生微生物学检验菌落总数测定》检测鸡蛋壳表面细菌总数的相关性。采用ATP生物荧光检测法和国标法对40个混合样品表面细菌总数进行检测,以log CFU/个蛋壳为横坐标(x),以logRLU/个蛋壳为纵坐标(y),分别进行线性、对数、乘幂、指数拟合。结果表明,ATP荧光检测法与国标法检测结果 Pearson相关系数为0.912,线性模型y=0.7306x-1.0041(R2=0.8322)拟合度较高。该试验结果为ATP荧光检测法在鸡蛋壳表面细菌总数快速检测中应用的可行性提供了依据。     

Detection of bacterial contamination in starch and resin-based papermaking chemicals using fluorescence techniques

Rapid fluorescence techniques were evaluated for the detection of bacterial contaminants in papermaking chemicals including starch and the resin-based sizes and starch slurries used in the paper industry. Viable and non-viable bacterial cells were visualised by fluorescent probes and detected by epifluorescence microscopy and flow cytometry. The best discrimination ability was obtained with the fluorescent probes LIVE/DEAD and SYBR Green, based on the staining of cellular nucleic acid, and ChemChrome V3, which demonstrated cellular enzymatic activity. The process samples had to be diluted and filtered before fluorescence staining and analysis because they were viscous and contained solid particles. Fluorescence microscopic counts of bacteria in highly contaminated process samples were similar to plate counts, but flow cytometric enumeration of bacterial cells in process samples yielded 2- to 10-fold lower counts compared with plate counts, depending on the consistency of the sample. The detection limits in flow cytometric analysis and in epifluorescence microscopy were 10³–10⁶ cells ml⁻¹ and 10⁵–10⁶ cells ml⁻¹, respectively. Intrinsic bacterial contamination was detectable with fluorescence techniques and highly contaminated process samples could be analysed with fluorescence methods. Electronic Publication     

Microbiological Analysis of Food Contact Surfaces in Child Care Centers

A study of six child care centers was conducted to assess the microbiological quality of three food contact surfaces (one food serving surface and two food preparation surfaces) and one non-food contact surface (diaper changing surface) to determine the effectiveness of cleaning and sanitization procedures within the facilities. Aerobic plate counts (APCs) and Escherichia coli/coliform counts of 50-cm² areas on all surfaces were determined using standard microbiological swabbing methods. Samples were taken three times a day (preopening, lunchtime, and following final cleanup) twice per month for 8 months in each child care center (n = 288 sampling times). Mean log APCs over the survey period were 1.32, 1.71, 1.34, 1.96, 1.50, and 1.81 log CFU/50 cm² for the six centers. Mean log coliform counts were 0.15, 0.40, 0.33, 1.41, 0.28, and 1.12 CFU/50 cm² for the same centers. Coliforms were detected in 283 of 1,149 (24.7%) samples, with counts ranging from 1 to 2,000 CFU/50 cm², while E. coli was detected in 18 of 1,149 (1.6%) samples, with counts ranging from 1 to 35 CFU/50 cm². The findings of this study demonstrated that the extent of bacterial contamination was dependent on the center, time of day, and the area sampled. While no direct correlation between contamination and illness can be made, given the high risk of food-borne illness associated with children, microbial contamination of food contact or non-food contact surfaces is an aspect of food safety that requires more attention. Emphasis on training and the development of modified standard sanitation operating procedures for child care centers are needed to reduce potential hazards.     

电解水的抑菌活性及对食品加工表面材料的消毒效果

为了考查应用电解水消除细菌污染的可行性,对氧化电解水的杀菌效果及对食品加工表面材料的消毒效果进行了研究。结果表明,含0.1%NaCl的自来水经7min的电解后所获得的氧化电解水,能在2min内将菌液浓度分别为4.20×106CFU/mL,2.18×106CFU/mL,1.44×106CFU/mL,2.10×106CFU/mL,1.94×106CFU/mL的埃希氏大肠杆菌(Escherichia coliO157:H7)、沙门氏菌(Salmonella enteritidis)、单核细胞增生李斯特菌(Listeria monocytogenes)、摩化摩根菌(Morganella morganii)、副溶血性弧菌(Vibrio parahaemolyticus)几乎全部杀死。另外,对食品加工表面接触材料中的地板砖、不锈钢板、瓷砖进行染菌消毒试验结果表明,含0.1%NaCl的电解水同样能将上述浓度的菌液感染到食品表面接触材料后在5min之内几乎全部将其杀死,是一种理想的食品表面材料消毒剂。     

A robust and fast bacteria counting method using CdSe/ZnS core/shell quantum dots as labels

A rapid, sensitive fluorescence measurement method for detecting the bacterial count using CdSe/ZnS as a fluorescence marker was described. High-quality CdSe/ZnS nanocrystals were synthesized and successfully conjugated with bacteria. The fluorescence intensity was proportional to bacterial count in the range of 10²–10⁸ CFU/mL and the low detection limit was 10² CFU/mL.     

Airborne bacteria in Kuwait (1986–1988)

Totally 341 outdoors air samples were taken by Casella Airborne Sampler at a height of 7 m in the Allergy Centre of Kuwait between 1986 and 1988. Bacillus was detected in 85.3% of the samples. Micrococcus (71.3%), Staphylococcus albus (65.4%). Gram-positive rods (53.4%) were more prevalent than gram-negative rods (23.7%). Higher counts were seen in 1986 (500 CFU m^?3) compared to 1987 (407 CFU m^?3) and 1988 (369 CFU m^?3). Relatively higher counts were seen in August and September and a smaller peak was found in February and March. The correlation between the various types was always positive and was frequently highly significant. High counts were seen with strong winds. Among the meteorological factors, wind speed was the only significant factor. High average of bacteria counts were found when winds were blowing from the land (574 CFU m^?3) compared with the sea (346.5 CFU m^?3). Higher average counts were observed in the days with sand storms (1769 CFU m^?3), with rising sand (534.8 CFU m^?3) and the other days with dust phenomena, compared with clear weather (317 CFU m^?3).     

Quantitative and qualitative study of the bacterial flora of farmed freshwater prawn (Macrobrachium rosenbergii) larvae

Quantitative and qualitative studies of the bacterial flora of farmed freshwater prawn (Macrobrachium rosenbergii) larvae in Saudi Arabia were performed, and isolates identified where possible. Physico‐chemical characteristics, bacterial counts, and the nature of the bacterial flora of larvae rearing tank water, sediment, tank wall surfaces, larval surface, supplied water, and feed were investigated. Bacterial counts ranged from 2.1 ± 1.3 × 10⁵ to 2.2 ± 0.8 × 10⁷ colony forming units (CFU) ml^?1 in tank water; 4.4 ± 0.9 × 10⁷ to 8.3 ± 1.7 ×10⁹ CFU g^?1 in tank sediment; 8.6 ± 1.0 × 10² to 9.8 ±0.7 × 10⁴ CFU cm^?2 on the tank wall surface; 1.3 ± 1.1 × 10⁴ to 7.7 ± 1.6 × 10⁶ CFU per larva surface, 7.9 ± 1.2 × 10⁵ to 5.0 ± 1.5 × 10⁷ CFU g^?1 in washed larval tissue slurries, 9.1 ± 0.7 × 10³ CFU ml^?1 in supplied water, and 2.4 ± 1.9 ×10¹⁰ CFU g^?1 in mixed feed. Fourteen bacterial genera were identified, including Chryseomonas sp., Vibrio spp., Cellulomonas sp., Aeromonas hydrophila, and Pasteurella sp. The tank water and sediment had similar bacteria to those on the prawn larvae. Chryseomonas sp., Cellulomonas sp. and Vibrio sp. were the most dominant species (prevalence >10%) in tank water; Chryseomonas sp., Pseudomonas alcaligenes and Shewanella putrefaciens in the sediment; Ps. alcaligenes and Cellulomonas sp. on the tank wall surface; Chryseomonas sp., and Cellulomonas sp. on the larval surface; and Chryseomonas sp., Vibrio vulnificus, Sh. putrefaciens and V. alginolyticus in the washed larval tissue slurries (prevalence 10%). Pseudomonas alcaligenes, Moraxella sp., Serratia liquefaciens, Gordona sp. and Burkholderia glumae were absent in larvae but identified in the culture water, tank sediment, and tank wall surface. Pseudomonas sp., Chryseomonas sp., Pasteurella sp. and V. alginolyticus were the prevalent bacteria (>12%) in supplied water. The feed contained V. alginolyticus, A. hydrophila and Cellulomonas sp. as the dominant bacteria (>13%). In the culture water and larvae samples, 83% of the feed and supplied water bacteria were identified.     

Use of ethidium bromide monoazide for quantification of viable and dead mixed bacterial flora from fish fillets by polymerase chain reaction

Ethidium bromide monoazide (EMA) was utilized to selectively allow conventional PCR amplification of target DNA from viable but not dead cells from a broth culture of bacterial mixed flora derived from cod fillets. The universal primers designated DG74 and RW01 that amplify a 370-bp sequence of a highly conserved region of all eubacterial 16S rDNA were used for the PCR. The use of 10 μg/ml or less of EMA did not inhibit the PCR amplification of DNA derived from viable bacteria. The minimum amount of EMA to completely inhibit the PCR amplification of DNA derived from dead bacterial cells was 0.8 μg/ml. Amplification of target DNA from only viable cells in a suspension with dead cells was selectively accomplished by first treating the cells with 1 μg/ml of EMA. A standard curve was generated relating the intensity of fluorescence of DNA bands to the log of CFU of mixed bacterial cultures for rapidly assessing the number of genomic targets per PCR derived from the number of CFU. A linear range of DNA amplification was exhibited from 1 × 10² to 1 × 10⁵ genomic targets per PCR. The viable/dead cell discrimination with the EMA-PCR method was evaluated by comparison with plate counts following freezing and thawing. Thawing frozen cell suspensions initially containing 1 × 10⁵ CFU/ml at 4, 20, and 37 °C yielded a 0.8 log reduction in the number of viable cells determined by both plate counts and EMA-PCR. In contrast, thawing for 5 min at 70 °C resulted in a 5 log reduction in CFU derived from plate counts (no CFU detected) whereas the EMA-PCR procedure resulted in only a 2.8 log reduction in genomic targets, possibly reflecting greater damage to enzymes or ribosomes at 70 °C to a minority of the mixed population compared to membrane damage.     

The Effects of Low Doses of Gamma-Radiation on Growth and Membrane Activity of <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> GRP3 and <Emphasis Type="Italic">Escherichia coli</Emphasis> M17

Microorganisms are part of the natural environments and reflect the effects of different physical factors of surrounding environment, such as gamma (γ) radiation. This work was devoted to the study of the influence of low doses of γ radiation with the intensity of 2.56?μW (m²?s)^?1 (absorbed doses were 3.8 mGy for the radiation of 15?min and 7.2 mGy—for 30?min) on Escherichia coli M-17 and Pseudomonas aeruginosa GRP3 wild type cells. The changes of bacterial, growth, survival, morphology, and membrane activity had been studied after γ irradiation. Verified microbiological (specific growth rate, lag phase duration, colony-forming units (CFU) number, and light microscopy digital image analysis), biochemical (ATPase activity of bacterial membrane vesicles), and biophysical (H⁺ fluxes throughout cytoplasmic membrane of bacteria) methods were used for assessment of radiation implications on bacteria. It was shown that growth specific rate, lag phase duration and CFU number of these bacteria were lowered after irradiation, and average cell surface area was decreased too. Moreover ion fluxes of bacteria were changed: for P. aeruginosa they were decreased and for E. coli—increased. The N,N′-dicyclohexylcarbodiimide (DCCD) sensitive fluxes were also changed which were indicative for the membrane-associated F₀F₁-ATPase enzyme. ATPase activity of irradiated membrane vesicles was decreased for P. aeruginosa and stimulated for E. coli. Furthermore, DCCD sensitive ATPase activity was also changed. The results obtained suggest that these bacteria especially, P. aeruginosa are sensitive to γ radiation and might be used for developing new monitoring methods for estimating environmental changes after γ irradiation.     

Microbiological quality of raw milk produced in Estonia

Aims: The microbial quality of farm bulk‐tank raw milk produced in Estonia during years 2004–2007 was investigated. Methods and Results: Bulk‐tank milk samples were analysed for lactic acid bacteria count (LABC), psychrotrophic bacteria count (PBC), aerobic spore‐forming bacteria count (ASFBC), total bacterial counts using BactoScan and somatic cell count (SCC) using Fossomatic. Randomly selected psychrotrophic isolates were subjected to 16S–23S PCR‐ribotyping. LABC remained below 10⁴ CFU ml^?1 in most samples, while psychrotrophic micro‐organisms dominated in 60% of farms. PBC ranged from 4·2 × 10² to 6·4 × 10⁴ CFU ml^?1, and ASFBC varied from 5 to 836 CFU ml^?1. Conclusions: In general, the microbiological quality of the farm bulk‐tank milk was good – more than 91% of samples contained <50 000 CFU ml^?1, and SCC in the majority of samples did not exceed the internationally recommended limits. Genus Pseudomonas spp. was the dominating spoilage flora with Pseudomonas fluorescens as the prevailing species. Significance and Impact of the Study: Specific bacterial groups (LABC, PBC and ASFBC), not analysed routinely by dairies, were determined in bulk‐tank raw milk of numerous dairy farms during 4‐year period. Based on the survey, dairy plants can better control their supply chains and select farms (milk) for the production of specific products, i.e. milk with low PBC and high LABC for cheesemaking.     

Investigation of critical inter‐related factors affecting the efficacy of pulsed light for inactivating clinically relevant bacterial pathogens

Aims: To investigate critical electrical and biological factors governing the efficacy of pulsed light (PL) for the in vitro inactivation of bacteria isolated from the clinical environment. Development of this alternative PL decontamination approach is timely, as the incidence of health care–related infections remains unacceptably high. Methods and Results: Predetermined cell numbers of clinically relevant Gram‐positive and Gram‐negative bacteria were inoculated separately on agar plates and were flashed with ≤60 pulses of broad‐spectrum light under varying operating conditions, and their inactivation measured. Significant differences in inactivation largely occurred depending on the level of the applied lamp discharge energy (range 3·2–20 J per pulse), the amount of pulsing applied (range 0–60 pulses) and the distance between light source and treatment surface (range 8–20 cm) used. Greater decontamination levels were achieved using a combination of higher lamp discharge energies, increased number of pulses and shorter distances between treatment surface and the xenon light source. Levels of microbial sensitivity also varied depending on the population type, size and age of cultures treated. Production of pigment pyocynanin and alginate slime in mucoid strains of Pseudomonas aeruginosa afforded some protection against lethal action of PL; however, this was evident only by using a combination of reduced amount of pulsing at the lower lamp discharge energies tested. A clear pattern was observed where Gram‐positive bacterial pathogens were more resistant to cidal effects of PL compared to Gram negatives. While negligible photoreactivation of PL‐treated bacterial strains occurred after full pulsing regimes at the different lamp discharge energies tested, some repair was evident when using a combination of reduced pulsing at the lower lamp discharge energies. Strains harbouring genes for multiple resistances to antibiotics were not significantly more resistant to PL treatments. Slight temperature rises (≤4·2°C) were measured on agar surfaces after extended pulsing at higher lamp discharge energies. Presence of organic matter on treatment surface did not significantly affect PL decontamination efficacy, nor did growth of PL‐treated bacteria on selective agar diminish survival compared to similarly treated bacteria inoculated and enumerated on nonselective agar plates. Conclusions: Critical inter‐related factors affecting the effective and repeatable in vitro decontamination performance of PL were identified during this study that will aid further development of this athermal process technology for applications in health care and in industry. Very rapid reductions (c. 7 log₁₀ CFU cm^?2 within ≤10 pulses) occurred using discharge energy of 20 J for all tested clinically relevant bacteria under study when treated at 8 cm distance from xenon light source. While no resistant flora is expected to develop for treatment of microbial pathogens on two‐dimensional surfaces, careful consideration of scale up factors such as design and operational usage of this PL technique will be required to assure operator safety. Significance and Impact of the Study: Findings and conclusions derived from this study will enable further development and optimization of this decontamination technique in health care and in food preparation settings, and will advance the field of nonthermal processing technologies.     

Microbiological study of khoa sold in Chambal region (Madhya Pradesh): A case study

Present study was conducted to analyze bacterial contaminants /pathogens in Khoa samples sold in Chambal region of Madhya Pradesh. Total Fifty samples of Khoa were brought from different localities of Chambal region at random and processed. Bacterial colony counts were also performed. Staphylococcus species and Streptococcus species were the predominant isolates. The viable counts obtained ranged from 1.3sX10⁴ to 2.1sX10⁶ CFU/g. Contamination of Khoa by pathogenic bacteria could be an important factor of gastrointestinal infections including food poisoning and food borne illness. Adequate consumer protection can be achieved by measuring the microbiological data of product.     

Direct In Situ Viability Assessment of Bacteria in Probiotic Dairy Products Using Viability Staining in Conjunction with Confocal Scanning Laser Microscopy

The viability of the human probiotic strains Lactobacillus paracasei NFBC 338 and Bifidobacterium sp. strain UCC 35612 in reconstituted skim milk was assessed by confocal scanning laser microscopy using the LIVE/DEAD BacLight viability stain. The technique was rapid (<30 min) and clearly differentiated live from heat-killed bacteria. The microscopic enumeration of various proportions of viable to heat-killed bacteria was then compared with conventional plating on nutrient agar. Direct microscopic enumeration of bacteria indicated that plate counting led to an underestimation of bacterial numbers, which was most likely related to clumping. Similarly, LIVE/DEAD BacLight staining yielded bacterial counts that were higher than cell numbers obtained by plate counting (CFU) in milk and fermented milk. These results indicate the value of the microscopic approach for rapid viability testing of such probiotic products. In contrast, the numbers obtained by direct microscopic counting for Cheddar cheese and spray-dried probiotic milk powder were lower than those obtained by plate counting. These results highlight the limitations of LIVE/DEAD BacLight staining and the need to optimize the technique for different strain-product combinations. The minimum detection limit for in situ viability staining in conjunction with confocal scanning laser microscopy enumeration was ~10⁸ bacteria/ml (equivalent to ~10⁷ CFU/ml), based on Bifidobacterium sp. strain UCC 35612 counts in maximum-recovery diluent.     

Sensitive Detection of Escherichia coli O157:H7 in Food and Water by Immunomagnetic Separation and Solid-Phase Laser Cytometry

Rapid, direct methods are needed to assess active bacterial populations in water and foods. Our objective was to determine the efficiency of bacterial detection by immunomagnetic separation (IMS) and the compatibility of IMS with cyanoditolyl tetrazolium chloride (CTC) incubation to determine respiratory activity, using the pathogen Escherichia coli O157:H7. Counterstaining with a specific fluorescein-conjugated anti-O157 antibody (FAb) following CTC incubation was used to allow confirmation and visualization of bacteria by epifluorescence microscopy. Broth-grown E. coli O157:H7 was used to inoculate fresh ground beef (<17% fat), sterile 0.1% peptone, or water. Inoculated meat was diluted and homogenized in a stomacher and then incubated with paramagnetic beads coated with anti-O157 specific antibody. After IMS, cells with magnetic beads attached were stained with CTC and then an anti-O157 antibody-fluorescein isothiocyanate conjugate and filtered for microscopic enumeration or solid-phase laser cytometry. Enumeration by laser scanning permitted detection of ca. 10 CFU/g of ground beef or <10 CFU/ml of liquid sample. With inoculated meat, the regression results for log-transformed respiring FAb-positive counts of cells recovered on beads versus sorbitol-negative plate counts in the inoculum were as follows: intercept = 1.06, slope = 0.89, and r² = 0.95 (n = 13). The corresponding results for inoculated peptone were as follows: intercept = 0.67, slope = 0.88, and r² = 0.98 (n = 24). Recovery of target bacteria on beads by the IMS-CTC-FAb method, compared with recovery by sorbitol MacConkey agar plating, yielded greater numbers (beef, 6.0 times; peptone, 3.0 times; water, 2.4 times). Thus, within 5 to 7 h, the IMS-CTC-FAb method detected greater numbers of E. coli O157 cells than were detected by plating. The results show that the IMS-CTC-FAb technique with enumeration by either fluorescence microscopy or solid-phase laser scanning cytometry gave results that compared favorably with plating following IMS.     

Factors Stimulating Propagation of Legionellae in Cooling Tower Water

Our survey of cooling tower water demonstrated that the highest density of legionellae, ≥10⁴ CFU/100 ml, appeared in water containing protozoa, ≥10² MPN/100 ml, and heterotrophic bacteria, ≥10⁶ CFU/100 ml, at water temperatures between 25 and 35°C. Viable counts of legionellae were detected even in the winter samples, and propagation, up to 10⁵ CFU/100 ml, occurs in summer. The counts of legionellae correlated positively with increases in water temperature, pH, and protozoan counts, but not with heterotrophic bacterial counts. The water temperature of cooling towers may promote increases in the viable counts of legionellae, and certain microbes, e.g., protozoa or some heterotrophic bacteria, may be a factor stimulating the propagation of legionellae.     

Comparison of bacteria from deep subsurface sediment and adjacent groundwater

Samples of groundwater and the enclosing sediments were compared for densities of bacteria using direct (acridine orange direct staining) and viable (growth on 1% PTYG medium) count methodology. Sediments to a depth of 550 m were collected from boreholes at three sites on the Savannah River Site near Aiken, South Carolina, using techniques to insure a minimum of surface contamination. Clusters of wells screened at discreet intervals were established at each site. Bacterial densities in sediment were higher, by both direct and viable count, than in groundwater samples. Differences between direct and viable counts were much greater for groundwater samples than for sediment samples. Densities of bacteria in sediment ranged from less than 1.00×10⁶ bacteria/g dry weight (gdw) up to 5.01 ×10⁸ bacteria/gdw for direct counts, while viable counts were less than 1.00×10³ CFU/gdw to 4.07×10⁷ CFU/gdw. Bacteria densities in groundwater were 1.00×10³–6.31×10⁴ bacteria/ml and 5.75–4.57×10² CFU/ml for direct and viable counts, respectively. Isolates from sediment were also found to assimilate a wider variety of carbon compounds than groundwater bacteria. The data suggest that oligotrophic aquifer sediments have unique and dense bacterial communities that are attached and not reflected in groundwater found in the strata. Effective in situ bioremediation of contaimination in these aquifers may require sampling and characterization of sediment communities.     

Sensitive detection of Escherichia coli O157:H7 in food and water by immunomagnetic separation and solid-phase laser cytometry

Rapid, direct methods are needed to assess active bacterial populations in water and foods. Our objective was to determine the efficiency of bacterial detection by immunomagnetic separation (IMS) and the compatibility of IMS with cyanoditolyl tetrazolium chloride (CTC) incubation to determine respiratory activity, using the pathogen Escherichia coli O157:H7. Counterstaining with a specific fluorescein-conjugated anti-O157 antibody (FAb) following CTC incubation was used to allow confirmation and visualization of bacteria by epifluorescence microscopy. Broth-grown E. coli O157:H7 was used to inoculate fresh ground beef (<17% fat), sterile 0.1% peptone, or water. Inoculated meat was diluted and homogenized in a stomacher and then incubated with paramagnetic beads coated with anti-O157 specific antibody. After IMS, cells with magnetic beads attached were stained with CTC and then an anti-O157 antibody-fluorescein isothiocyanate conjugate and filtered for microscopic enumeration or solid-phase laser cytometry. Enumeration by laser scanning permitted detection of ca. 10 CFU/g of ground beef or <10 CFU/ml of liquid sample. With inoculated meat, the regression results for log-transformed respiring FAb-positive counts of cells recovered on beads versus sorbitol-negative plate counts in the inoculum were as follows: intercept = 1.06, slope = 0.89, and r2 = 0. 95 (n = 13). The corresponding results for inoculated peptone were as follows: intercept = 0.67, slope = 0.88, and r2 = 0.98 (n = 24). Recovery of target bacteria on beads by the IMS-CTC-FAb method, compared with recovery by sorbitol MacConkey agar plating, yielded greater numbers (beef, 6.0 times; peptone, 3.0 times; water, 2.4 times). Thus, within 5 to 7 h, the IMS-CTC-FAb method detected greater numbers of E. coli O157 cells than were detected by plating. The results show that the IMS-CTC-FAb technique with enumeration by either fluorescence microscopy or solid-phase laser scanning cytometry gave results that compared favorably with plating following IMS.     

UV Light Inactivation of Human and Plant Pathogens in Unfiltered Surface Irrigation Water

Fruit and vegetable growers continually battle plant diseases and food safety concerns. Surface water is commonly used in the production of fruits and vegetables and can harbor both human- and plant-pathogenic microorganisms that can contaminate crops when used for irrigation or other agricultural purposes. Treatment methods for surface water are currently limited, and there is a need for suitable treatment options. A liquid-processing unit that uses UV light for the decontamination of turbid juices was analyzed for its efficacy in the treatment of surface waters contaminated with bacterial or oomycete pathogens, i.e., Escherichia coli, Salmonella enterica, Listeria monocytogenes, Clavibacter michiganensis subsp. michiganensis, Pseudomonas syringae pv. tomato, and Phytophthora capsici. Five-strain cocktails of each pathogen, containing approximately 10⁸ or 10⁹ CFU/liter for bacteria or 10⁴ or 10⁵ zoospores/liter for Ph. capsici, were inoculated into aliquots of two turbid surface water irrigation sources and processed with the UV unit. Pathogens were enumerated before and after treatment. In general, as the turbidity of the water source increased, the effectiveness of the UV treatment decreased, but in all cases, 99.9% or higher inactivation was achieved. Log reductions ranged from 10.0 to 6.1 and from 5.0 to 4.2 for bacterial pathogens and Ph. capsici, respectively.     

Evaluation of Bacterial Community Structure and Its Influence on Sulfide Oxidation in a Bio-Leaching Environment

The mechanism of sulfide oxidation by adhering bacteria (direct oxidation mechanism) and by ferric ion in the aqueous phase was studied by quantitative assessment of bacterial activity on the sulfide surface. To probe for the principal bacterial species on the surface and in the supernatant, a library of DNA genes encoding portions of bacterial 16S rRNA was constructed. The PCR-amplified DNA from the bacterial populations was cloned employing PROMEGA's pGEM-T Easy Vector system. The clone frequency indicated that iron-oxidizing bacteria were dominant in the liquid phase, while Acidithiobacillus ferroixdans, which is both sulfur and iron oxidizer was the most prevalent on the sulfide surface. Samples of crystalline pyrite were exposed to the bacterial consortium to evaluate surface alterations caused by bacteria. Chemical (abiotic) oxidation experiments with ferric ion as the oxidant were carried out in parallel with the biological oxidation tests. Changes in the surface topography were monitored by atomic force microscopy (AFM) while changes in surface chemistry were examined by Raman spectroscopy. Bacterial attachment resulted in a 53% increase in the specific surface area in comparison to a 13% increase caused by chemical (ferric ion) oxidation. The oxidation rate was assessed by evaluating the iron release. After corrections for surface area changes, the specific abiotic (oxidation by Fe^{3 +}) and biotic oxidation rates with adhering bacteria were nearly the same (2.6 × 10^{? 9} mol O₂/s/m² versus 3.3 × 10^{? 9} mol O₂/s/m²) at pH = 2 and a temperature of 25°C. The equality of rates implies that the availability of ferric ion as the oxidant is rate limiting.     

Use of ethidium bromide monoazide for quantification of viable and dead mixed bacterial flora from fish fillets by polymerase chain reaction

Ethidium bromide monoazide (EMA) was utilized to selectively allow conventional PCR amplification of target DNA from viable but not dead cells from a broth culture of bacterial mixed flora derived from cod fillets. The universal primers designated DG74 and RW01 that amplify a 370-bp sequence of a highly conserved region of all eubacterial 16S rDNA were used for the PCR. The use of 10 microg/ml or less of EMA did not inhibit the PCR amplification of DNA derived from viable bacteria. The minimum amount of EMA to completely inhibit the PCR amplification of DNA derived from dead bacterial cells was 0.8 microg/ml. Amplification of target DNA from only viable cells in a suspension with dead cells was selectively accomplished by first treating the cells with 1 microg/ml of EMA. A standard curve was generated relating the intensity of fluorescence of DNA bands to the log of CFU of mixed bacterial cultures for rapidly assessing the number of genomic targets per PCR derived from the number of CFU. A linear range of DNA amplification was exhibited from 1 x 10(2) to 1 x 10(5) genomic targets per PCR. The viable/dead cell discrimination with the EMA-PCR method was evaluated by comparison with plate counts following freezing and thawing. Thawing frozen cell suspensions initially containing 1 x 10(5) CFU/ml at 4, 20, and 37 degrees C yielded a 0.8 log reduction in the number of viable cells determined by both plate counts and EMA-PCR. In contrast, thawing for 5 min at 70 degrees C resulted in a 5 log reduction in CFU derived from plate counts (no CFU detected) whereas the EMA-PCR procedure resulted in only a 2.8 log reduction in genomic targets, possibly reflecting greater damage to enzymes or ribosomes at 70 degrees C to a minority of the mixed population compared to membrane damage.