A New Approach To Utilize PCR–Single-Strand-Conformation Polymorphism for 16S rRNA Gene-Based Microbial Community Analysis

Single-strand-conformation polymorphism (SSCP) of DNA, a method widely used in mutation analysis, was adapted to the analysis and differentiation of cultivated pure-culture soil microorganisms and noncultivated rhizosphere microbial communities. A fragment (approximately 400 bp) of the bacterial 16S rRNA gene (V-4 and V-5 regions) was amplified by PCR with universal primers, with one primer phosphorylated at the 5′ end. The phosphorylated strands of the PCR products were selectively digested with lambda exonuclease, and the remaining strands were separated by electrophoresis with an MDE polyacrylamide gel, a matrix specifically optimized for SSCP purposes. By this means, reannealing and heteroduplex formation of DNA strands during electrophoresis could be excluded, and the number of bands per organism was reduced. PCR products from 10 of 11 different bacterial type strains tested could be differentiated from each other. With template mixtures consisting of pure-culture DNAs from 5 and 10 bacterial strains, most of the single strains could be detected from such model communities after PCR and SSCP analyses. Purified bands amplified from pure cultures and model communities extracted from gels could be reamplified by PCR, but by this process, additional products were also generated, as detected by further SSCP analysis. Profiles generated with DNAs of rhizosphere bacterial communities, directly extracted from two different plant species grown in the same field site, could be clearly distinguished. This study demonstrates the potential of the selected PCR–single-stranded DNA approach for microbial community analysis.     

DNA sequencing by a subcloning-walking strategy using a specific and semi-random primer in the polymerase chain reaction.

In its basic concept, in vitro DNA amplification by the polymerase chain reaction (PCR) is restricted to those instances in which segments of known sequence flank the fragment to be amplified. Recently, techniques have been developed for amplification of unknown DNA sequences. These techniques, however, are dependent on the presence of suitable restriction endonuclease sites. Here, we describe a strategy for PCR amplification of DNA that lies outside the boundaries of known sequence. It is based on the use of one specific primer, homologous to the known sequence, and one semi-random primer. Restriction sites in the 5' proximal regions of both primers allow for cloning of the amplified DNA in a suitable sequencing vector or any other vector. It was shown by sequence analysis that the cloned DNA fragments represent contiguous DNA fragments that are flanked at one side by the sequence of the specific primer. When omitting the semi-random primer, a single clone was obtained, which originated from PCR amplification of target DNA by the specific primer in both directions.     

Single restriction enzyme-assisted megaprimer polymerase chain reaction to fuse two DNA sequences on separate cloning vectors

We describe a simple and versatile method to fuse two DNA sequences on separate cloning vectors in a single polymerase chain reaction (PCR). The method, termed restriction enzyme-assisted megaprimer PCR (REM–PCR), requires that the two cloning vectors share a common sequence and that the DNA sequences to be fused are cloned in the same orientation with respect to the common sequence. Fusion of the two sequences is achieved by mutual priming at the common sequence between two DNA fragments that were generated by restriction enzyme and linearly amplified by repetitive priming in the PCR reaction mixture.     

Laser microdissection and single unique primer PCR allow generation of regional chromosome DNA clones from a single human chromosome.

We have developed an argon laser chromosome microdissection technique in conjunction with a polymerase chain reaction (PCR) approach to directly amplify microdissected chromosomes. The single 22-mer primer used in PCR, although unique in sequence (5'-TAGATCTGA-TATCTGAATTCCC-3'), randomly primed and amplified any target DNA. These methods were applied to the distal half of the short arm of human chromosome 4 containing the Huntington disease (HD) locus. Forty-four percent of representative clones from this library identify single-copy DNA sequences. This calculation suggests that the resulting chromosome-specific DNA library contains approximately 600 nonoverlapping sequences with an average size 350 bp at an average spacing of 30 kbp along chromosome 4. This microdissection and PCR cloning procedure is a simple and general approach for constructing a chromosome region-specific DNA library from a single metaphase spread.     

Studies on Microdissection and Microcloning of the Rye Chromosome 1R

Two 1R chromosomes of Secale cereale L. were isolated from one metaphase cell by means of chromosome micro-isolation, and the chromosomal DNA was amplified adopting the cohesive adapters single primer polymerase chain reaction (CASP-PCR) technique. The CASP-PCR products were labeled as probes. The results of Southern blot hybridization confirmed that the CASP- PCR products derived from the chromosome IR were homologous with the genomic DNA of S. cereale. The clones of PCR products were obtained with high efficiency. Over 10 000 recombinant clones were obtained from one-tenth of the ligation mixture which was transferred into the competent E. coli DH5a. The size of the inserted fragments of clones ranged from 250 bp to 500 bp. This research has established the foundation for further selection of chromosome 1R markers.     

Polymerase chain reaction amplification and sequence analysis of human mutant adenine phosphoribosyltransferase genes: the nature and frequency of errors caused by Taq DNA polymerase

Using the polymerase chain reaction (PCR) with Taq DNA polymerase, we have amplified a 2.4-kb fragment of genomic DNA containing the adenine phosphoribosyltransferase (APRT) gene from patients with APRT deficiency. Several clones from each patient were sequenced after subcloning the PCR product into M13mp18. Selected regions of the amplified fragment were also sequenced directly. This enabled us to distinguish PCR-induced errors from endogenous mutations and polymorphisms in each clone. 44 PCR errors were found in a total of 57,94 kb of DNA sequenced from 25 clones from 7 patients. All the errors were due to the PCR process and not to subcloning, as shown by sequence analysis of 5 APRT-positive clones isolated from a phage genomic library.     

Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.     

Detecting single base substitutions as heteroduplex polymorphisms.

We have developed a sensitive technique for detecting single base substitutions in polymerase chain reaction (PCR) products from individuals heterozygous for polymorphisms or new mutations. This technique takes advantage of the formation of heteroduplexes in the PCR between different alleles from heterozygous individuals. These heteroduplexes can be detected on polyacrylamide gels because they migrate slower than their corresponding homoduplexes. Using PCR, we have generated a series of point mutations in a defined region of DNA in the equine infectious anemia virus (EIAV). Each mutation is the result of a single base substitution. By mixing the PCR products amplified from these mutations with one another, as well as with wildtype PCR products, we can generate heteroduplexes in which the identity of the mismatched bases is known. We detected eight of nine point mutations using this technique. We have also modified the electrophoretic conditions to optimize the detection of these heteroduplexes. In addition, the usefulness of this technique is demonstrated by its ability to detect a mutation in the cystic fibrosis gene that is the result of a single base substitution. This technique should prove useful for rapidly screening large numbers of individuals for new mutations or polymorphisms.     

Analysis of major histocompatibility complex class II gene in water voles using capillary electrophoresis‐single stranded conformation polymorphism

Analysis of a single strand conformation polymorphism (SSCP) using capillary electrophoresis (CE) is a novel method to study polymorphism of DNA sequences in large scale population studies. We optimized CE‐SSCP analysis to study the major histocompatibility complex (MHC) class II alpha gene (DQA) polymorphism. Short‐chain linear polyacrylamide (6%) as sieving matrix, TrisCl (pH 8.5) as buffer for sample dilution, and 27 °C, 9 kV as electrophoresis parameters were suitable for sufficient resolution of all alleles. We found that almost 25% of clones contained a PCR (polymerase chain reaction) artefact and strict criteria have to be applied when using cloning and sequencing to analyse the allelic diversity of MHC genes.     

Non-isotopic PAGE analysis of amplified products from simple sequence repeat single-primer polymerase chain reaction

We describe modifications to two genetic typing procedures, simple sequence repeat (SSR)-anchored polymerase chain reaction (PCR) and single primer amplification of SSRs (SPARs), by combining polyacrylamide gel (PAGE) resolution of PCR amplified products with silver staining for detection. Turkey (Meleagris gallopavo) and chicken (Gallus domesticus) genomic DNA were used as templates in the PCR typing. The single primers used for PCR analyses were (CAC), (TCC), (GACT), (TGTC) and (TTTA). The PCR conditions have previously been described. As expected, the number of fragments detected by the analyses were higher than those previously described using agarose but lower than that reported by others from PAGE analyses and radioisotope detection. Unlike agarose gel analyses, all the primers amplified polymorphic products ranging from 22 percent (%) for (TGTC) to 44% for (TCC) (Table 1). The results suggest that the level of polymorphic DNA fragments from genetic typing by SPARs of SSRs could be increased, above that of agarose and ethidium bromide staining, by PAGE analyses followed by silver staining for detection. The level of DNA polymorphism detected was however lower than radioisotope detection, but the safety and ease of the modified method described in the current work may make it a preferable approach to both SPARs and SSR-anchored PCR for genetic mapping in eukaryotes.This revised version was published online in October 2005 with corrections to the Cover Date.     

The bovine genome contains polymorphic microsatellites

Dinucleotide repeats constitute so-called microsatellites of the human and other eukaryotic genomes. Microsatellite polymorphisms can be identified through the amplification of the microsatellite DNA using the polymerase chain reaction (PCR), followed by resolution of the amplified DNA fragments on a polyacrylamide sequencing gel. We performed a preliminary sequence database search to identify bovine sequences containing (CA)n, (AC)n, (GT)n, or (TG)n blocks, with n greater than or equal to 6. This search yielded 10 sequences containing one or two of the specified repeat blocks and often additional dinucleotide repeat blocks. One of the microsatellite-containing regions has been sequenced twice from independent clones and the reported sequences showed variation in the number of repeats. PCR-amplified fragments of another sequence, the gene for steroid 21-hydroxylase, ranged from 186 to 216 nucleotides in 43 unrelated animals. The database search, as well as the hypervariable microsatellite in the bovine steroid 21-hydroxylase gene, indicates that dinucleotide blocks may be an abundant source of DNA polymorphism in cattle.     

One-pot fusion polymerase chain reaction for combinatorial synthesis of DNA from several cassettes

The fusion of DNA fragments is becoming increasingly more important. The ability to work without being constrained by restriction sites enables DNA fusion to be applied to a much broader range of fragments. Therefore, we describe a simplified polymerase chain reaction (PCR)-based method for fusion of DNA fragments in one step. In a single PCR, two templates, an overlapping primer, and template-specific forward and reverse primers are used. After a few cycles, the fusion DNA is assembled and is amplified. The ratio of overlapping primer to forward/reverse primers and template DNA is essential for the success of the reaction.     

A primer-guided nucleotide incorporation assay in the genotyping of apolipoprotein E

We describe a new technique by which single base changes in human genes can be conveniently detected. In this method the DNA fragment of interest is first amplified using the polymerase chain reaction with an oligonucleotide primer biotinylated at its 5'-end. The amplified 5'-biotinylated DNA is immobilized on an avidin matrix and rendered single-stranded. The variable nucleotide in the immobilized DNA is identified by a one-step primer extension reaction directed by a detection step primer, which anneals to the DNA immediately upstream of the site of variation. In this reaction a single labeled nucleoside triphosphate complementary to the nucleotide at the variable site is incorporated. The method is highly sensitive, allowing the use of nucleoside triphosphates labeled with radioisotopes of low specific activity (3H) as well as nonradioactive markers (digoxigenin). The procedure consists of few and simple operations and is thus applicable to the analysis of large numbers of samples. Here we applied it to the analysis of the three-allelic polymorphism of the human apolipoprotein E gene. We were able to correctly identify all possible combinations of the three apo E alleles.     

Directed termination PCR: a one-step approach to mutation detection.

We describe a novel PCR-based method that allows the generation of nested termination fragments by integrating both selective DNA amplification and directed chain termination into a single PCR reaction. These termination fragments can be examined for sequence variation in either denaturing or non-denaturing polyacrylamide gels. This method provides a one-step and highly effective approach for the detection of both insertions/deletions and single base pair substitutions in sequences up to 1 kb in length.     

基于四引物扩增受阻突变体系PCR 的多重乳腺癌相关SNP 位点检测方法的建立

为提高单核苷酸多态性检测的通量, 引入多重嵌合引物PCR 和毛细管电泳对四引物扩增受阻突变体系PCR 进行改进. 针对乳腺癌位点rs4784227(C>T), rs1219648(G>A)和rs3803662(T>C)设计特异性嵌合引物, 经一次PCR扩增后, 通过毛细管电泳分析产物长度, 同时确定3 个位点的基因型. 70 份全血和口腔拭子样本, 电泳结果均与测序一致, 实现成功分型. 本方法仅需一次PCR 和一次毛细管电泳即可获得3 个位点的分型结果, 操作简单、快速准确.     

Generation of high-density DNA markers from yeast artificial chromosome DNA by single unique primer-polymerase chain reaction

We have developed a method for the whole sequence amplification of yeast artificial chromosome (YAC) DNA excised from preparative pulsed-field gel electrophoresis using single unique primer-polymerase chain reaction procedures. We used seven contiguous YAC clones, which span 2 Mbp of the Huntington disease gene region on 4p16.3, to amplify the YAC DNAs. The average size of the amplified DNA was ∼300 bp long, and 12 DNA markers located on the YAC clones positively hybridized with these amplified products, implying that the sequences of the YAC clones were comprehensively amplified by our procedures. These amplified YAC DNAs greatly facilitate the characterization of YAC clones, leading to the detailed analysis of the defined chromosomal region.     

In-cell PCR from mRNA: amplifying and linking the rearranged immunoglobulin heavy and light chain V-genes within single cells.

We describe a process for the identification of mRNAs within single cells, as demonstrated with the immunoglobulin (Ig) variable region (V) genes of two mouse hybridoma cell lines and the bcr-abl fusion gene of the human K562 myeloid leukaemia line. The cells were fixed and permeabilised, the mRNA reverse transcribed to cDNA and the cDNA amplified by the polymerase chain reaction (PCR). After using fluorescent PCR primers, the amplified DNA could be detected within the cells as demonstrated by confocal fluorescence microscopy and flow cytometry. Furthermore the amplified Ig VH and VL DNA could be assembled within the same cell using suitable PCR primers. We detected no cross-contamination of amplified DNA between cells: the DNA isolated from mixtures of two hybridoma cell lines (B1-8 and NQ10/12.5) treated to in-cell PCR and assembly, was shown by cloning to correspond to the combinations of VH and VL genes of the parent hybridomas. We forsee diverse applications of in-cell assembly by PCR, especially for the analysis of the combinations of chains of rearranged Ig or T cell receptor (TCR) V-genes in a population of cells, and the construction of human antibodies from the V-genes of immune B-lymphocytes.     

Amplification of human minisatellites by the polymerase chain reaction: towards DNA fingerprinting of single cells.

Hypervariable minisatellites can be amplified from human DNA by the polymerase chain reaction, using primers from DNA flanking the minisatellite to amplify the entire block of tandem repeat units. Minisatellite alleles up to 5-10 kb long can be faithfully amplified. At least six minisatellite loci can be co-amplified from the same DNA sample and simultaneously detected to provide a reproducible and highly variable DNA fingerprint which can be obtained from nanogram quantities of human DNA. The polymerase chain reaction can also be used to analyse single target minisatellite molecules and single human cells, despite the appearance of spurious PCR products from some hypervariable loci. DNA fingerprinting at the level of one or a few cells therefore appears possible.     

Rapid and reliable screening of a tomato YAC library exclusively based on PCR

An improved procedure is presented to select clones from a tomato yeast artificial chromosome (YAC) library. The procedure is based exlcusively on the polymerase chain reaction (PCR). We combined DNA from approximately 36,000 YAC clones in pools containing 96-single YAC clones from one master plate and further in super pools representing 10 master plates. This pooling strategy allows the selection of single YAC clones homologous to a target sequence after three rounds of PCR using super pools, single pools, and single YAC clones as a template. Single YAC clones were spheroplasted prior to the third PCR round in order to omit the conventional radioactive colony hybridization step. To date, we applied this PCR-based selection strategy to isolate clones homologousto ten different sequence-tagged sites (STS) that are linked to genes targeted for map-based cloning. The selection of YAC clones can be readily accomplished within three days. The PCR-based screening strategy is easy to set up and contributes to a further acceleration of the construction of YAC contigs.     

Direct and crossover PCR amplification to facilitate Tn5supF-based sequencing of lambda phage clones.

The 264 bp mini-transposon Tn5supF was constructed to sequence DNAs cloned in phage lambda without extensive shotgun subcloning or primer walking. Unique sequences near each transposon end serve as primer binding sites, and a supF gene is used to select transposition to lambda. We describe here PCR methods that facilitate Tn5supF-based sequencing. In a first pass, insertions are mapped relative to the ends of the cloned fragment using pairs of primers specific for vector DNA next to the cloning site and for a Tn5supF end. Most insertions not mapped in this step are near the center of the cloned fragment or in the vector arms, and are then mapped relative to the two innermost insertions by 'crossover' PCR. This involves amplification from primers on different DNA molecules, and generates hybrid DNA products whose lengths correspond to the distances between the two insertions. We routinely amplified more than 6 kb in direct PCR and 3 kb in crossover PCR; at the limit we amplified up to approximately 10 kb in direct PCR and approximately 6 kb in crossover PCR, but not reproducibly. Crossover PCR products were also obtained with insertions separated by only 200 bp, indicating that no rare sites are needed to switch templates. PCR products were purified by adsorption and then elution from glass slurry, and sequenced directly. Ladders of more than 400 bp were obtained from primer sites on each DNA strand; 2 kb was read from crossover PCR products, and showed that they were amplified with fidelity. In conclusion, direct and crossover PCR methods expedite transposon insertion mapping, and yield templates for accurate sequencing of both DNA strands.