Solid-phase cDNA library construction, a versatile approach.

A rapid and versatile method for cDNA library construction was developed. It is based on conventional cDNA library synthesis including all enzymatic steps usually required, but is performed on a solid support. The cDNA is immobilised via a biotin residue to streptavidin coupled magnetic beads, which allows rapid and easy to perform changes of buffers and enzymes. Therefore, it combines speed (library construction within a single day) with high quality libraries, making it ideally suited for most purposes.     

Principle of LAMP method--a simple and rapid gene amplification method

So far nucleic acid test (NAT) has been employed in various fields, including infectious disease diagnoses. However, due to its complicated procedures and relatively high cost, it has not been widely utilized in many actual diagnostic applications. We have therefore developed a simple and rapid gene amplification technology, Loop-mediated Isothermal Amplification (LAMP) method, which has shown prominent results of surpassing the performance of the conventional gene amplification methods. LAMP method acquires three main features: (1) all reaction can be carried out under isothermal conditions; (2) the amplification efficiency is extremely high and tremendous amount of amplification products can be obtained; and (3) the reaction is highly specific. Furthermore, developed from the standard LAMP method, a rapid LAMP method, by adding in the loop primers, can reduce the amplification time from the previous 1 hour to less than 30 minutes. Enormous amount of white precipitate of magnesium pyrophosphate is produced as a by-product of the amplification, therefore, direct visual detection is possible without using any reaction indicators and detection equipments. We believe LAMP technology, with the integration of these features, can rightly apply to clinical genetic testing, food and environmental analysis, as well as NAT in different fields.     

A simple and rapid gene amplification from Arabidopsis leaves using AnyDirect system

Polymerase chain reaction (PCR) is a powerful technique in molecular biology and is widely used in various fields. By amplifying DNA fragments, PCR has facilitated gene cloning procedures, as well as molecular genotyping. However, the extraction of DNA from samples often acts as a limiting step of these reactions. In particular, the extraction of PCR-compatible genomic DNA from higher plants requires complicated processes and tedious work because plant cells have rigid cell walls and contain various endogenous PCR inhibitors, including polyphenolic compounds. We recently developed a novel solution, referred to as AnyDirect, which can amplify target DNA fragments directly from whole blood without the need for DNA extraction. Here, we developed a simple lysis system that could produce an appropriate template for direct PCR with AnyDirect PCR buffer, making possible the direct amplification of DNA fragments from plant leaves. Thus, our experimental procedure provides a simple, convenient, non-hazardous, inexpensive, and rapid process for the amplification of DNA from plant tissue.     

Digestion-after-shuffling: a method for combinatorial library construction

We have developed a convenient method for family shuffling of amino acid sequences, termed digestion-after-shuffling. After DNA shuffling of homologous genes, plasmid mixture is extracted from a library and used for several double digestions with restriction enzymes. For each double digestion, two restriction enzymes are selected, corresponding to the single restriction sites of different parental genes. After digestions, fragments with expected sizes are obtained by gel purification and religated to construct recombinant plasmids. Thus, the obtained genes should be chimeras and have at least two restriction sites originating from different parental sequences.     

A simple and versatile method for the preparation of vector-primers by adapter-end-primer ligation

A group of efficient cDNA cloning strategies employs vector-primers where cDNA synthesis starts from the oligo(dT)-primer tail, which is conventionally attached to cloning vectors by use of terminal deoxynucleotidyl transferase. An alternative, efficient and more versatile method of vector-primer preparation is to directly ligate, by use of T4 DNA ligase, a double-digested vector, e.g., pTZ18R/Pst I/Bam HI, to a synthetic (Bam HI)-adapter-end-primer, 5'-pGATCC-Tn or 5'-pGATCC-site-specific sequence. The use of a utility-vector containing a sizable spacer between the two selected restriction sites enables unambiguous separation on agarose gels of the double-digested vector precursors from single-digested ones, further simplifying the vector preparation. The adapter-end-primer ligation method can be applied to any suitable vectors with multiple cloning sites for the preparation of not only oligo(dT)-tailed, but also site-specific sequence-tailed vectors. Thus, the method enables the cDNA cloning of total poly (A+)-mRNAs, as well as specific RNA or mRNA species with or without poly(A)-tail.     

A novel method for construction of gene fragment library to searching epitopes

Identification of the epitope sequence or the functional domain of proteins is a laborious process but a necessary one for biochemical and immunological research. To achieve intensive and effective screening of these functional peptides in various molecules, we established a novel screening method using a phage library system that displays various lengths and parts of peptides derived from target protein. Applying this library for epitope mapping, epitope peptide was more efficiently identified from gene fragment library than conventional random peptide library. Our system may be a most powerful method for identifying functional peptides.     

Rapid, sensitive and simple detection method for koi herpesvirus using loop-mediated isothermal amplification

New methods were developed for the detection of koi herpesvirus (KHV, CyHV-3) by LAMP, which were compared with the PCR for specificity and sensitivity. We designed two primer sets targeting a specific sequence within the 9/5 PCR amplicon (9/5 LAMP) and the upper region of the Sph I-5 PCR amplicon ( Sph I-5 LAMP), including a sequence highly conserved among the strains. The amplification was monitored in real-time based on the increase in turbidity, with magnesium pyrophosphate as the by-product. The reactions were carried out under isothermal conditions at 65°C for 60 min. The detection limit of both LAMP was six copies, equal to the modified Sph I-5 PCR. No cross-reactivity with other fish pathogenic viruses and bacteria was observed. Sph I-5 LAMP was found to have a quicker response in terms of the reaction velocity than 9/5 LAMP. Therefore, we consider Sph I-5 LAMP to be superior for routine use. Additionally, LAMP was found applicable to crude extract from gills and other organs. LAMP methods are superior in terms of sensitivity, specificity, rapidity and simplicity, and are potentially a valuable diagnostic tool for KHV infections.     

Identification of a new gene encoding 5-enolpyruvylshikimate-3-phosphate synthase using genomic library construction strategy

Applying the genomic library construction strategy and colony screening, a new aroA gene encoding 5-enolpyruvylshikimate-3-phosphate synthase has been identified, cloned and overexpressed in Escherichia coli, and the enzyme was purified to homogeneity. Kinetic analysis of the AroA _{P.fluorescens} indicated that the full-length enzyme exhibits 10-fold increased IC50 and an approximately 38-fold increased K _i for glyphosate compared to those of the AroA _E.coli , while retaining high affinity for the substrate phosphoenolpyruvate. Furthermore, we have transformed the new aroA _{P.fluorescens} gene into Arabidopsis thaliana via a floral dip method, and demonstrated that transgenic A. thaliana plants exhibit significant glyphosate resistance when compared with the wild type.     

A simple, efficient method to create a cDNA library.

The simplified "All In One Tube" protocol for constructing a cDNA library combines the advantages of the "Classic method" and the Okayama-Berg method while overcoming some of their drawbacks. In this method, adding adapters, linkers or enzyme digestion steps are no longer necessary after cDNA synthesis, thus making it quicker and especially useful when dealing with small samples of mRNA.     

Efficient amplification of light and heavy chain variable regions and construction of a non-immune phage scFv library

Non-immune phage scFv library is one of the most attractive resources for therapeutics, diagnostics and basic research. As a matter of fact, quality of the library is limited by inefficient PCR cloning of antibody genes using degenerated primers. PCR using this type of primers is difficult to optimize conditions for efficient amplification, and therefore causes loss of antibody diversities. To overcome this problem, we described a novel two-step amplification of V_κ and V_H genes with newly designed primer sets. Initially, we amplified V_κ and V_H genes from their signal sequences to the joining region to keep antibody diversity as large as possible. Thereafter, highly degenerated primers were used to amplify the V_κ and V_H genes from the framework region 1 to the joining region. The V_κ and V_H genes from the second PCR then were linked by PCR overlapping extension to generate the scFv library. Fifteen clones from the library were randomly picked and sequenced, and the diversity of full-length scFvs was confirmed. Expression capability of clones in the library was 80% after confirmation using colony hybridization. The results demonstrated the efficiency of this strategy and the primer sets for construction of the scFv library.     

Multiple populations of deleted mitochondrial DNA detected by a novel gene amplification method

A gene amplification method for detecting small populations of deleted mitochondrial DNA was used in analysis of skeletal muscle from a patient with ocular myopathy. Multiple populations of differently deleted mtDNA were detected in the patient muscle. The presence of deleted mtDNAs was further confirmed by comparison of the shift in the sizes of the amplified fragments with the shift in the positions of the primers used for the amplification, (the primer shift PCR method). Other methods, namely Southern blotting, enzymic activity measurement, and Western blotting, were inefficient at detecting the mitochondrial abnormality. These findings suggest that the primer shift PCR method could be valuable for accurate diagnosis of ocular myopathy associated with mtDNA deletion.     

Vector-capping: a simple method for preparing a high-quality full-length cDNA library.

Full-length cDNAs play an essential role in identifying genes and determining their promoter regions. Here we describe a simple method for constructing a full-length cDNA library, which has the following advantages: (i) it consists of only three steps including direct ligation between a vector and a cDNA strand using T4 RNA ligase, (ii) it contains neither a PCR process generating mutations nor restriction enzyme treatment causing truncation of cDNA, (iii) the intactness of cDNA is assured due to the presence of an additional dGMP at its 5' end, (iv) approximately 95% of cDNA clones are full-length when cultured cells or fresh tissues are used, (v) several micrograms of total RNA without mRNA purification is sufficient for preparation of a library containing >10(5) independent clones, and (vi) a long-sized full-length cDNA up to 9.5 kbp can be cloned. This method will accelerate comprehensive gene analysis in a variety of eukaryotes.