High-throughput SPR sensor for food safety

High-throughput surface plasmon resonance (SPR) biosensor for rapid and parallelized detection of nucleic acids identifying specific bacterial pathogens is reported. The biosensor consists of a high-performance SPR imaging sensor with polarization contrast and internal referencing (refractive index resolution 2 x 10(-7) RIU) and an array of DNA probes microspotted on the surface of the SPR sensor. It is demonstrated that short sequences of nucleic acids (20-23 bases) characteristic for bacterial pathogens such as Brucella abortus, Escherichia coli, and Staphylococcus aureus can be detected at 100 pM levels. Detection of specific DNA or RNA sequences can be performed in less than 15 min by the reported SPR sensor.     

Point mutation detection with the sandwich method employing hydrogel nanospheres by the surface plasmon resonance imaging technique

We propose a surface modification procedure to construct DNA arrays for use in surface plasmon resonance (SPR) imaging studies for the highly sensitive detection of a K-ras point mutation, enhanced with hydrogel nanospheres. A homobifunctional alkane dithiol was adsorbed on Au film to obtain the thiol surface, and ethyleneglycol diglycidylether (EGDE) was reacted to insert the ethyleneglycol moiety, which can suppress nonspecific adsorption during SPR analysis. Then streptavidin (SA) was immobilized on EGDE using tosyl chloride activation. Biotinylated DNA ligands were bound to the SA surface via biotin-SA interaction to fabricate DNA arrays. In SPR analysis, the DNA analyte was exposed on the DNA array and hybridized with the immobilized DNA probes. Subsequently, the hydrogel nanospheres conjugated with DNA probes were bound to the DNA analytes in a sandwich configuration. The DNA-carrying nanospheres led to SPR signal enhancement and enabled us to discriminate a K-ras point mutation in the SPR difference image. The application of DNA-carrying hydrogel nanospheres for SPR imaging assays was a promising technique for high throughput and precise detection of point mutations.     

Rapid detection, identification, and enumeration of Escherichia coli cells in municipal water by chemiluminescent in situ hybridization

A new chemiluminescent in situ hybridization (CISH) method provides simultaneous detection, identification, and enumeration of culturable Escherichia coli cells in 100 ml of municipal water within one working day. Following filtration and 5 h of growth on tryptic soy agar at 35 degrees C, individual microcolonies of E. coli were detected directly on a 47-mm-diameter membrane filter using soybean peroxidase-labeled peptide nucleic acid (PNA) probes targeting a species-specific sequence in E. coli 16S rRNA. Within each microcolony, hybridized, peroxidase-labeled PNA probe and chemiluminescent substrate generated light which was subsequently captured on film. Thus, each spot of light represented one microcolony of E. coli. Following probe selection based on 16S ribosomal DNA (rDNA) sequence alignments and sample matrix interference, the sensitivity and specificity of the probe Eco16S07C were determined by dot hybridization to RNA of eight bacterial species. Only the rRNA of E. coli and Pseudomonas aeruginosa were detected by Eco16S07C with the latter mismatch hybridization being eliminated by a PNA blocker probe targeting P. aeruginosa 16S rRNA. The sensitivity and specificity for the detection of E. coli by PNA CISH were then determined using 8 E. coli strains and 17 other bacterial species, including closely related species. No bacterial strains other than E. coli and Shigella spp. were detected, which is in accordance with 16S rDNA sequence information. Furthermore, the enumeration of microcolonies of E. coli represented by spots of light correlated 92 to 95% with visible colonies following overnight incubation. PNA CISH employs traditional membrane filtration and culturing techniques while providing the added sensitivity and specificity of PNA probes in order to yield faster and more definitive results.     

Nuclease S1 mapping of 16S ribosomal RNA in ribosomes

Escherichia coli 16S rRNA and 16S-like rRNAs from other species have several universally conserved sequences which are believed to be single-stranded in ribosomes. The quantitative disposition of these sequences within ribosomes is not known. Here we describe experiments designed to explore the availability of universal 16S rRNA sequences for hybridization with DNA probes in 30S particles and 70S ribosomes. Unlike previous investigations, quantitative data on the accessibility of DNA probes to the conserved portions of 16S rRNA within ribosomes was acquired. Uniquely, the experimental design also permitted investigation of cooperative interactions involving portions of conserved 16S rRNA. The basic strategy employed ribosomes, 30S subunits, and 16S rRNAs, which were quantitatively analyzed for hybridization efficiency with synthetic DNA in combination with nuclease S1. In deproteinated E. coli 16S rRNA and 30S subunits, the regions 520-530, 1396-1404, 1493-1504, and 1533-1542 are all single-stranded and unrestricted for hybridization to short synthetic DNAs. However, the quantitative disposition of the sequences in 70S ribosomes varies with each position. In 30S subunits there appear to be no cooperative interactions between the 16S rRNA universal sequences investigated.     

Oligonucleotide probes complementary to variable regions of ribosomal RNA discriminate between Mycoplasma species

On the basis of information from computer-assisted sequence comparison of the Mycoplasma pneumoniae 16S ribosomal RNA (rRNA) sequences with sequences from various other mycoplasmal and bacterial species, we constructed M. pneumoniae-specific oligonucleotide probes complementary to variable regions in the 16S rRNA molecule. Using a DNA/RNA dot blot hybridization procedure, it was possible to detect less than 1 X 10(3) mycoplasmas. This test is a most sensitive assay for species-specific detection of bacteria. It can easily be adapted for detection and identification of other bacterial species and may have wide medical and industrial application.     

Identification of defined sequences in domain V of E. coli 23S rRNA in the 50S subunit accessible for hybridization with complementary oligodeoxyribonucleotides.

The accessibility of specific sequences in domain V of E. coli 23s rRNA in the 50S subunit to complementary oligodeoxyribonucleotides (cDNA) has been investigated. The apparent percentage of subunits engaged in complex formation was determined by incubation of radiolabeled cDNA probe with 50S subunits, followed by nitrocellulose membrane filtration of the reaction mixtures and measurement of the bound radiolabeled cDNA probes by liquid scintillation counting of the filters. The site(s) of hybridization were determined by digestion of the RNA in the RNA/DNA heteroduplex by RNase H. The results of this study indicated that single-stranded sequences, 2058-2062, 2448-2454, 2467-2483, and 2497-2505 were available for hybridization to cDNA probes. Bases 2489-2496, which have been postulated to be base paired with 2455-2461 were also accessible for hybridization.     

Sequence versus Structure for the Direct Detection of 16S rRNA on Planar Oligonucleotide Microarrays

A two-probe proximal chaperone detection system consisting of a species-specific capture probe for the microarray and a labeled, proximal chaperone probe for detection was recently described for direct detection of intact rRNAs from environmental samples on oligonucleotide arrays. In this study, we investigated the physical spacing and nucleotide mismatch tolerance between capture and proximal chaperone detector probes that are required to achieve species-specific 16S rRNA detection for the dissimilatory metal and sulfate reducer 16S rRNAs. Microarray specificity was deduced by analyzing signal intensities across replicate microarrays with a statistical analysis-of-variance model that accommodates well-to-well and slide-to-slide variations in microarray signal intensity. Chaperone detector probes located in immediate proximity to the capture probe resulted in detectable, nonspecific binding of nontarget rRNA, presumably due to base-stacking effects. Species-specific rRNA detection was achieved by using a 22-nt capture probe and a 15-nt detector probe separated by 10 to 14 nt along the primary sequence. Chaperone detector probes with up to three mismatched nucleotides still resulted in species-specific capture of 16S rRNAs. There was no obvious relationship between position or number of mismatches and within- or between-genus hybridization specificity. From these results, we conclude that relieving secondary structure is of principal concern for the successful capture and detection of 16S rRNAs on planar surfaces but that the sequence of the capture probe is more important than relieving secondary structure for achieving specific hybridization.     

Liquid phase SPR imaging experiments for biosensors applications

Surface plasmon resonance (SPR) has recently gained attention as a label-free method for the detection of biological molecules binding onto functionalised surfaces. It is one of the most sensitive detection method for monitor variations in the thickness and refractive index in ultra-thin films. Here, the adsorption processes of oligonucleotides onto gold substrates have been investigated in aqueous buffer solution using SPR imaging measurements. The hybridization of a thiol-modified, single stranded oligonucleotide anchored to a gold surface via thiol group, with its complementary sequence has been observed and characterised monitoring the hybridization process by SPR equipment. In situ investigation of smallest changes in SPR imaging measurements dynamically performed in liquid phase in the presence of DNA complementary probes was performed. Infrared spectroscopy and scanning electron microscopy characterisation of the functionalised gold surfaces of the biosensor were compared with the images obtained by SPR experimental apparatus.     

Sequence versus structure for the direct detection of 16S rRNA on planar oligonucleotide microarrays

A two-probe proximal chaperone detection system consisting of a species-specific capture probe for the microarray and a labeled, proximal chaperone probe for detection was recently described for direct detection of intact rRNAs from environmental samples on oligonucleotide arrays. In this study, we investigated the physical spacing and nucleotide mismatch tolerance between capture and proximal chaperone detector probes that are required to achieve species-specific 16S rRNA detection for the dissimilatory metal and sulfate reducer 16S rRNAs. Microarray specificity was deduced by analyzing signal intensities across replicate microarrays with a statistical analysis-of-variance model that accommodates well-to-well and slide-to-slide variations in microarray signal intensity. Chaperone detector probes located in immediate proximity to the capture probe resulted in detectable, nonspecific binding of nontarget rRNA, presumably due to base-stacking effects. Species-specific rRNA detection was achieved by using a 22-nt capture probe and a 15-nt detector probe separated by 10 to 14 nt along the primary sequence. Chaperone detector probes with up to three mismatched nucleotides still resulted in species-specific capture of 16S rRNAs. There was no obvious relationship between position or number of mismatches and within- or between-genus hybridization specificity. From these results, we conclude that relieving secondary structure is of principal concern for the successful capture and detection of 16S rRNAs on planar surfaces but that the sequence of the capture probe is more important than relieving secondary structure for achieving specific hybridization.     

Microtitre plate hybridization system for detection of thermophilic Campylobacter rRNA

A microtitre plate nucleic acid probe hybridization system was developed for the detection of ribosomal RNA from thermophilic Campylobacter (Camp. jejuni, Camp. coli, Camp. lari and Camp. upsaliensis). A specific DNA probe obtained by amplification of 23S rRNA sequences using the polymerase chain reaction technique was immobilized on a microtitre plate, and used for hybridization with target 23S rRNA from cell lysates. The RNA-DNA hybrids thus formed in the wells were detected by an immunoenzymatic assay using a monoclonal antiRNA-DNA hybrid antibody. The sensitivity of this system was 2.7 x 10(4) cells ml(-1). This simple, sensitive and inexpensive hybridization and immunoenzymatic assay system should facilitate the detection of Campylobacter in food and clinical samples.     

Asymmetric template function of microbial deoxyribonucleic acids: transcription of ribosomal and soluble ribonucleic acids

In Bacillus subtilis and Escherichia coli, 16 and 23S ribosomal ribonucleic acid (rRNA) hybridize exclusively with the heavy (H) strand of methylated albuminkieselguhr (MAK)-fractionated complementary deoxyribonucleic acid (DNA) strands. All the soluble RNA (4S RNA) in B. subtilis and 66 to 75% of the 4S RNA in E. coli also hybridize with the H strand. Interspecific hybridization shows that E. coli 23S rRNA also binds selectively to the DNA H strand of Salmonella typhimurium. The hybridization peak for all three cellular RNA components is specifically located in the late-eluting region of the absorbance profile of the DNA H strand. The early-eluting region of the light (L) strand preferentially inhibits the hybridization between the peak region of the H strand and 23S rRNA. These regions are considered to represent the transcribing sequences and their complements for 23S rRNA in the separated H and L strands of DNA, respectively.     

Broad range DNA probes for detecting and amplifying eubacterial nucleic acids

In this report we describe and characterize two oligomer probes that are broadly homologous to conserved eubacterial 16S ribosomal RNA (rRNA) sequences not present in human 18 rRNA or human mitochondrial 12S rRNA. One or both of the probes can detect all of 23 phylogenetically diverse eubacterial nucleic acids against which they were tested by dot blot hybridization. A sensitivity of about 1 bacterium per 10 eukaryotic cells was achieved. By using these oligomer sequences or their complements as primers in the polymerase chain reaction (PCR), the equivalent of 1 pg of E. coli DNA was detected in the presence of a large excess of eukaryotic DNA. Information useful for partial phylogenetic classification of detected organisms may be obtained by direct sequence analysis of the amplified DNA and comparison with known sequences or catalogs. Such broadly homologous probes offer advantages over more narrowly specific probes for detecting organisms whose identity is unknown. They could thus be employed for recognizing infection by organisms that cannot be cultured as may occur, for example, in tissue culture or in plant or animal diseases of unknown cause, provided the probes fail to hybridize with host nucleic acids.     

Label-free and high-sensitive detection of Salmonella using a surface plasmon resonance DNA-based biosensor

A method based on surface plasmon resonance (SPR) DNA biosensor has been developed for label-free and high-sensitive detection of Salmonella. A biotinylated single-stranded oligonucleotide probe was designed to target a specific sequence in the invA gene of Salmonella and then immobilized onto a streptavidin coated dextran sensor surface. The invA gene was isolated from bacterial cultures and amplified using a modified semi-nested asymmetric polymerase chain reaction (PCR) technique. In order to investigate the hybridization detection, experiments with different concentration of synthetic target DNA sequences have been performed. The calibration curve of synthetic target DNA had good linearity from 5 nM to 1000 nM with a detection limit of 0.5 nM. The proposed method was applied successfully to the detection of single-stranded invA amplicons from three serovars of Salmonella, i.e., Typhimurium, Enterica and Derby, and the responses to PCR products were related to different S. typhimurium concentrations in the range from 10(2) to 10(10) CFU mL(-1). While with this system to detect E. coli and S. aureus, no significant signal was observed, demonstrating good selectivity of the method. In addition, the hybridization can be completed within 15 min, and the excellent sensor surface regeneration allows at least 300 assay cycles without obvious loss of performance.     

Oligonucleotide probe for detecting Enterobacteriaceae by in situ hybridization

AIMS: To develop oligonucleotide probes for visualizing bacteria belonging to Enterobacteriaceae. METHODS AND RESULTS: 24-mer oligonucleotide probe (probe D) was designed by comparison of 16S rDNA sequences of 35 species of Enterobacteriaceae, eight species of Vibrionaceae and six species of Pasteurellaceae. The sequence of the probe corresponding to the complementary sequence of a position 1251-1274 of Escherichia coli 16S rRNA was found to be a highly conserved region of 16S rDNA sequence in Enterobacteriaceae different from that of Vibrionaceae and Pasteurellaceae. The fluorescent dye-labelled probe was tested for the specificity by in situ hybridization and epifluorescence microscopy. Seventy-six out of 78 strains belonging to Enterobacteriaceae were visualized in an optimal hybridization condition. No bacterial strains belonging to Vibrionaceae (31 strains) and Gram-positive bacteria (three strains) were visualized. CONCLUSIONS: In situ hybridization using probe D allows the detection of bacterial cells belonging to Enterobacteriaceae without false positive reaction. SIGNIFICANCE AND IMPACT OF THE STUDY: In situ hybridization techniques using the probe D are potential tools for detecting Enterobacteriaceae in food and water samples.     

Direct detection of 16S rRNA in soil extracts by using oligonucleotide microarrays

We report on the development and validation of a simple microarray method for the direct detection of intact 16S rRNA from unpurified soil extracts. Total RNAs from Geobacter chapellei and Desulfovibrio desulfuricans were hybridized to an oligonucleotide array consisting of universal and species-specific 16S rRNA probes. PCR-amplified products from Geobacter and Desulfovibrio were easily and specifically detected under a range of hybridization times, temperatures, and buffers. However, reproducible, specific hybridization and detection of intact rRNA could be accomplished only by using a chaperone-detector probe strategy. With this knowledge, assay conditions were developed for rRNA detection using a 2-h hybridization time at room temperature. Hybridization specificity and signal intensity were enhanced using fragmented RNA. Formamide was required in the hybridization buffer in order to achieve species-specific detection of intact rRNA. With the chaperone detection strategy, we were able to specifically hybridize and detect G. chapellei 16S rRNA directly from a total-RNA soil extract, without further purification or removal of soluble soil constituents. The detection sensitivity for G. chapellei 16S rRNA in soil extracts was at least 0.5 microg of total RNA, representing approximately 7.5 x 10(6) Geobacter cell equivalents of RNA. These results suggest that it is now possible to apply microarray technology to the direct detection of microorganisms in environmental samples, without using PCR.     

Fluorescence in situ hybridization of 16S rRNA gene clones (Clone-FISH) for probe validation and screening of clone libraries

A method is presented for fluorescence in situ hybridization (FISH) of 16S rRNA gene clones targeting in vivo transcribed plasmid inserts (Clone-FISH). Several different cloning approaches and treatments to generate target-rRNA in the clones were compared. Highest signal intensities of Clone-FISH were obtained using plasmids with a T7 RNA polymerase promoter and host cells with an IPTG-inducible T7 RNA polymerase. Combined IPTG-induction and chloramphenicol treatment of those clones resulted in FISH signals up to 2.8-fold higher than signals of FISH with probe EUB338 to cells of Escherichia coli. Probe dissociation curves for three oligonucleotide probes were compared for reference cells containing native (FISH) or cloned (Clone-FISH) target sequences. Melting behaviour and calculated T(d) values were virtually identical for clones and cells, providing a format to use 16S rRNA gene clones instead of pure cultures for probe validation and optimization of hybridization conditions. The optimized Clone-FISH protocol was also used to screen an environmental clone library for insert sequences of interest. In this application format, 13 out of 82 clones examined were identified to contain sulphate-reducing bacterial rRNA genes. In summary, Clone-FISH is a simple and fast technique, compatible with a wide variety of cloning vectors and hosts, that should have general utility for probe validation and screening of clone libraries.     

Feasibility of transferring fluorescent in situ hybridization probes to an 18S rRNA gene phylochip and mapping of signal intensities

DNA microarray technology offers the possibility to analyze microbial communities without cultivation, thus benefiting biodiversity studies. We developed a DNA phylochip to assess phytoplankton diversity and transferred 18S rRNA probes from dot blot or fluorescent in situ hybridization (FISH) analyses to a microarray format. Similar studies with 16S rRNA probes have been done determined that in order to achieve a signal on the microarray, the 16S rRNA molecule had to be fragmented, or PCR amplicons had to be <150 bp in length to minimize the formation of a secondary structure in the molecule so that the probe could bind to the target site. We found different results with the 18S rRNA molecule. Four out of 12 FISH probes exhibited false-negative signals on the microarray; eight exhibited strong but variable signals using full-length 18S RNA molecules. A systematic investigation of the probe's accessibility to the 18S rRNA gene was made using Prymenisum parvum as the target. Fourteen additional probes identical to this target covered the regions not tested with existing FISH probes. Probes with a binding site in the first 900 bp of the gene generated positive signals. Six out of nine probes binding in the last 900 bp of the gene produced no signal. Our results suggest that although secondary structure affected probe binding, the effect is not the same for the 18S rRNA gene and the 16S rRNA gene. For the 16S rRNA gene, the secondary structure is stronger in the first half of the molecule, whereas in the 18S rRNA gene, the last half of the molecule is critical. Probe-binding sites within 18S rRNA gene molecules are important for the probe design for DNA phylochips because signal intensity appears to be correlated with the secondary structure at the binding site in this molecule. If probes are designed from the first half of the 18S rRNA molecule, then full-length 18S rRNA molecules can be used in the hybridization on the chip, avoiding the fragmentation and the necessity for the short PCR amplicons that are associated with using the 16S rRNA molecule. Thus, the 18S rRNA molecule is a more attractive molecule for use in environmental studies where some level of quantification is desired. Target size was a minor problem, whereas for 16S rRNA molecules target size rather than probe site was important.     

Surface Plasmon Resonance Studies of the Hybridization Behavior of DNA-Modified Gold Nanoparticles with Surface-Attached DNA Probes

Colloidal gold nanoparticles (AuNPs) have been extensively investigated as amplification tags to improve the sensitivity of surface plasmon resonance (SPR) biosensors. When using the so-called AuNP-enhanced SPR technique for DNA detection, the density of single-stranded DNA (ssDNA) on both the AuNPs and planar gold substrates is of crucial importance. Thus, in this work, we carried out a systematical study about the influence of surface ssDNA density onto the hybridization behavior of various DNA-modified AuNPs (DNA-AuNPs) with surface-attached DNA probes by using surface plasmon resonance spectroscopy. The lateral densities of the ssDNA on both the AuNPs and planar gold substrates were controlled by using different lengths of oligo-adenine sequence (OAS) as anchoring group. Besides SPR measurements, the amount of the captured DNA-AuNPs after the hybridization was further identified via atomic force microscope (AFM). SPR and AFM results clearly indicated that a higher ssDNA density on either the AuNPs or the gold substrates would give rise to better hybridization efficiency. Moreover, SPR data showed that the captured DNA-AuNPs could not be removed from SPR sensor surfaces using various dehybridization solutions regardless of surface ssDNA density. Consequently, it is apparent that the hybridization behavior of DNA-AuNPs was different from that of solution-phase ssDNA. Based on these data, we hypothesized that both multiple recognitions and limited accessibility might account for the hybridization of DNA-AuNPs with surface-attached ssDNA probes.

     

Use of Subtractive Hybridization To Design Habitat-Based Oligonucleotide Probes for Investigation of Natural Bacterial Communities

We describe a rapid oligonucleotide probe design strategy based on subtractive hybridization which yields probes for 16S rRNA or rRNA genes of individual members of microbial communities that are specific within the context of those communities. This strategy circumvents the need to sequence many similar or identical clones of dominant members of a community. Radioactively labeled subfragments of a cloned 16S rRNA gene sequence for which a probe is required (target) were hybridized with biotinylated total 16S ribosomal DNA (rDNA) amplified from the microbial community, and the hybrids formed were subsequently discarded. The remaining enriched fragments were used to screen a library consisting of cloned subfragments of the target sequence by colony hybridization in order to identify the variable regions of the 16S rRNA gene with the required specificity. The sequencing of random clones in one 16S rDNA library demonstrated that only those clones with 100% sequence identity with the probe fragment were detected by it. Moreover, sequencing of other, randomly selected, probe-positive clones revealed 100% sequence identity with the probe. Probes developed in this way tended to correspond to more variable regions of the 16S rRNA if the target sequences were similar to the sequences of other clones in the library and to less variable regions if the target sequences were phylogenetically isolated within the clone library. Although the absolute specificity of the latter probes, as assessed by comparison with available database sequences, was lower than the absolute specificity of the probes from the more variable regions, they were specific within the context of the environmental samples from which they were derived.     

DNA probes in detection of spiroplasmas and mycoplasma-like organisms in plants and insects

Abstract DNA probes were applied to detect spiroplasmas and uncultivable mycoplasma-like organisms (MLOs) in infected plants and insects. The probes consisted of pMC5, a plasmid carrying the RNA genes of Mycoplasma capricolum and pRA1, a plasmid recovered from Spiroplasma citri . Southern blot hybridization of pMC5 with digested DNAs of periwinkle plants infected with S. citri , or with various MLOs, yielded 2 heavy and several weaker bands. The heavy hybridization bands were shown to represent rRNA genes of the plant chloroplasts, indicating significant nucleotide sequence homology between the mycoplasmal rRNA genes and those of plant chloroplasts. Some of the weaker hybridization bands, not revealed in DNA of healthy plants, appeared to represent rRNA gene sequences of the infectious agent. Use of the spiroplasma plasmid as a probe enabled the detection of S. citri in infected plant material and in hemolymph of infected leafhoppers at a high sensitivity level.