Reactivity of the N-heterocyclic carbene complexes [Ru(IMes)2(CO)HX] (X = OH, Cl) with alkynes

Treatment of the 16-electron hydroxy hydride complex [Ru(IMes)₂(CO)H(OH)] (1, IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene) with HCCR affords the alkynyl species [Ru(IMes)₂(CO)H(CCR)] (R = Ph 3, SiMe₃, 4) and [Ru(IMes)₂(CO)(CCR)₂] (R = Ph, 5). Deuterium labelling studies show that the mono-alkynyl complexes are formed via hydrogen transfer from a coordinated alkyne ligand to Ru-OH, while bis-alkynyl formation is proposed to take place through hydrogen transfer to Ru-H. Both 3 and 5 readily coordinate CO to give the corresponding dicarbonyl species 6 and 7. Addition of HCCPh to the hydride chloride precursor [Ru(IMes)₂(CO)HCl] (2) results in a different reaction pathway involving alkyne insertion into the Ru-H bond to yield the alkenyl chloride complex [Ru(IMes)₂(CO)(CHCHPh)Cl] 8. Complexes 3-8 have been structurally characterised by X-ray crystallography.     

Mononuclear and dinuclear iridium and heterodinuclear iridium-rhodium complexes derived from 1,4-C6H4(CCSiMe3)2 as precursor

The labile iridium(I) precursor trans-[IrCl(C₈H₁₄)(PiPr₃)₂] (2), prepared in situ from [IrCl(C₈H₁₄)₂]₂ (1) and PiPr₃, reacted with equimolar amounts of 1,4-C₆H₄(CCSiMe₃)₂ (3) at 60 °C to give the mononuclear vinylidene complex trans-[IrCl(CC(SiMe₃)C₆H₄CCSiMe₃)(PiPr₃)₂] (4). From 2 and 3 in the molar ratio of 2:1, the dinuclear compound trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄C(SiMe₃)C)IrCl(PiPr₃)₂] (5) was obtained. Reaction of 4 with [RhCl(PiPr₃)₂]₂ (6) at room temperature afforded the heterodinuclear alkyne(vinylidene) complex trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄CCSiMe₃)RhCl(PiPr₃)₂] (7), which on heating at 45 °C was converted to the bis(vinylidene) isomer trans,trans-[(PiPr₃)₂ClIr(CC(SiMe₃)C₆H₄C(SiMe₃)C)RhCl(PiPr₃)₂] (8).     

Synthesis, crystal structure and solid state photoluminescence of [Pt(trpy)(CCPh)]SbF6 (trpy=2,2′:6′,2″-terpyridine)

The synthesis and characterisation of an orange polymorph of [Pt(trpy)(CCPh)]SbF₆ is described where trpy = 2,2′:6′,2″-terpyridine. An X-ray crystal structure determination at 293 K reveals that the cations are planar and stacked head-to-tail with alternating Pt?Pt distances of 3.604(1) and 4.412(1) Å. The perpendicular distances between successive cation planes are constant along the stack at a value of 3.33 Å. Crystal structure determinations at 240 and 200 K show that reducing the temperature to 200 K has no significant effect on the cation arrangement. However, below 200 K there is a phase change that we have not been able to characterise, but which has an effect on the solid state photoluminescence exhibited by [Pt(trpy)(CCPh)]SbF₆. Thus, whereas at temperatures of ?200 K, a broad peak with two components at ca. 566 and 597 nm is observed, below 200 K a longer wavelength peak develops that red-shifts as the temperature is lowered [λ(em)_max = 637 nm at 80 K]. We assign the ?200 K emission as ³MLLCT in origin, since the X-ray data show that ligand-ligand (LL) and not metal-metal (MM) interactions are important at T ? 200 K. On the other hand, the long wavelength emission observed below 200 K is typical of ³MMLCT emission, suggesting that the phase change leads to d_z²(Pt)-d_z²(Pt) orbital interactions. Of particular interest is that the cation exhibits ³MLCT emission in dichloromethane that maximizes at 619 nm, i.e., the high temperature solid state emission occurs at a shorter wavelength, an unexpected result since intermolecular interactions in the solid usually cause the emission to occur at longer wavelengths. A possible explanation for this unexpected result is given.     

Novel long bipyridine-type linking ligands containing an intervening naphthalene fragment: [Zn(L)(NO3)2], [Zn(L)(NO3)2], and [Cd(L)1.5(NO3)2] (L = (4-py)-CHN-C10H6-NCH-(4-py); L = (3-py)-CHN-C10H6-NCH-(3-py))

Novel bipyridine-type linking ligands L¹ ((4-py)-CHN-C₁₀H₆-NCH-(4-py)) and L² ((3-py)-CHN-C₁₀H₆-NCH-(3-py)), a pair of isomers due to possessing different pairs of terminal pyridyl groups, were prepared by the Schiff-base condensation. In ligand L¹, the N?N separation between the terminal pyridyl groups is 16.0 Å, with their nitrogen donor atoms at the para positions (4,4′). The corresponding N?N separation in ligand L² is 14.2 Å, with the nitrogen donor atoms at the meta positions (3,3′). 1-D zigzag-chain coordination polymers [Zn(L¹)(NO₃)₂] (1) and [Zn(L²)(NO₃)₂] (2) were prepared by reactions of Zn(NO₃)₂ · 6H₂O with ligands L¹ and L², respectively, by solution diffusion. Polymer 3, [Cd(L¹)_1.5(NO₃)₂], prepared from Cd(NO₃)₂ · 4H₂O and L¹, exhibits a 1-D ladder structure, whose repeating ladder unit consists of four Cd metals and four L¹ ligands to create a large 76-membered ring with dimensions of 20.8 × 20.8 Å. All products were structurally characterized by X-ray diffraction.     

Reactions of [Os3(CO)10(MeCN)2] with ethynyl thiophenes: The formation of linked clusters

The reaction of 2 equiv. of [Os₃(CO)₁₀(MeCN)₂] with R-CC-L-CC-R (R = H, L = (C₄H₂S); R = SiMe₃, L = (C₄H₂S-C₄H₂S), (C₄H₂S-C₄H₂S-C₄H₂S), (C₄H₂S)-(C₁₄H₈)-(C₄H₂S)) affords the series of linked clusters [{Os₃(CO)₁₀}(HCC(C₄H₂S)CCH){Os₃(CO)₁₀}] (1), [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S-C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (2), [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S-C₄H₂S-C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (4) and [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S)-(C₁₄H₈)-(C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (6) as the major products. The complexes have been characterised by a range of spectroscopic methods and, in the case of 1 and 2 by single crystal X-ray crystallography. The alkyne groups cap the osmium triangles in the expected μ₃-η²-||-bonding mode and each triangle is coordinated by nine terminal and one μ₂-carbonyl group. Solution UV-Vis spectra of the complexes were similar to those observed for the free ligands consistent with there being little delocalisation between the cluster units and the thiophene groups.     

Coordination and derivatization of 3, 4, and 6-membered nitrogen heterocycles at a chiral tungsten(II) center

Reaction of [Tp′W(CO)₂(PhCCPh)][OTf] (1b) (Tp′ = hydridotris(3,5-dimethylpyrazolyl)borate) with excess aziridine or 2-methylaziridine followed by protonation with produces chiral tungsten(II) amine complexes (3, 4; R = Me, Ph). An azetidine amido complex, Tp′W(CO)(PhCCMe)(H₂) (5) is synthesized by reaction of [Tp′W(CO)₂(PhCCMe)][OTf] (1a) with excess azetidine. Oxidation of amido complex 5 with I₂ in the presence of a weak base provides the corresponding 1-azetine complex, (6). Addition of methylmagnesium bromide to complex 6 results in formation of predominantly one diastereomer (S_WR_C/R_WS_C) (96:4 dr) of the 2-methylazetidine complex, Tp′W(CO)(PhCCMe)(H₂) (7). Reaction of complex 5 with results in formation of a cationic azetidine complex, (8). Reaction of 1b with excess piperidine followed by oxidation affords 2,3,4,5-tetrahydropyridine complex 9b, . Formation of an enamido complex, Tp′W(CO)(PhCCPh)(H₂) (10), is observed upon addition of base to 9b. Subsequent addition of [D⁺] to the enamido β-carbon results in the formation of the deuterated product, 9b-d₁, as determined by ²H NMR. Seven X-ray crystal structures have been determined, and these encompass complexes with 3, 4, and 6-membered heterocyclic ligands. Crystal structures are reported for two aziridine adducts (2, 4) two neutral amido complexes (5, 7), one cationic imine complex (6), and one cationic amine (8) complex derived from azetidine, and the imine complex formed from piperidine (9).     

Syntheses, characterization and luminescence of Pt-M (M = Re, Ru, Gd) heteronuclear complexes with 5-ethynyl-2,2′-bipyridine

Incorporation of diplatinum component [Pt₂(μ-dppm)₂(CCbpy)₄] (1, dppm = Ph₂PCH₂PPh₂, CCbpy = 2,2′-dipyridyl-5-acetylide) with Re(CO)₅Cl, Ru(bpy)₂Cl₂ (bpy = 2,2′-bipyridine) and Gd(hfac)₃(H₂O)₂ (Hhfac = hexafluoroacetylacetone) via 2,2′-dipyridyl chelating induced isolation of (2), (3), and (4) complexes, respectively. The structures of 2 and 4 were determined by X-ray single crystal diffraction. Intense low-energy absorptions occur in the range 360-510 nm originating from metal-to-ligand charge transfer (MLCT) transitions. These compounds display photoluminescence in both solid states and dichloromethane at room temperature with emissive lifetimes in the range of microseconds.     

Synthesis and coordination of the bifunctionalized ylides Ph2P(CH2)n(Ph)2PCHCOOMe (n = 1, 2) and ketenylidene Ph2P(CH2)2(Ph)2PCCO to Pd and Pt complexes

In this paper it is reported the synthesis of the phosphonium salts [Ph₂P(CH₂)_n(Ph)₂PCH₂COOMe]Br (n = 1 (1), 2 (2)) and [Ph₂P(CH₂COOMe)(CH₂)_n(Ph)₂PCH₂COOMe]Br₂ (n = 3 (3)) derived from the reactions of the diphosphines dppm, dppe and dppp with methyl bromoacetate. By reaction of the monophosphonium salt of dppm and dppe with the strong base Na[N(SiMe₃)₂] the corresponding carbonyl stabilized ylides Ph₂P(CH₂)_n(Ph)₂PCHCOOMe (n = 1 (4), 2 (5)) were obtained. The Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide was reacted with Pd(II) and Pt(II) substrates. From these reactions were isolated exclusively complexes in which the ylide was chelated to the metal through the free phosphine group and the ylidic carbon atom. A further reaction of the Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide with 1.5 equiv. of Na[N(SiMe₃)₂] gives the bifunctionalized ketenylidene Ph₂P(CH₂)₂(Ph)₂PCCO (6) system. This cumulenic ylide reacts with Pt(II) complexes to form a chelated derivative in which IR and NMR spectra suggest the breaking of the CC bond of the -CCO group.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of molybdenum Me2Si[CHMo(NAr)(ORF3)2]2 and PhVinSi[CHMo(NAr)(ORF3)2]2

Bimetallic alkylidene complexes of molybdenum (R_F3O)₂(ArN)MoCH-SiMe₂-CHMo(NAr)(OR_F3)₂ (1) and (R_F3O)₂(ArN)MoCH-SiPhVin-CHMo(NAr)(OR_F3)₂ (2) (Ar = 2,6-C₆H₃; R_F3 = CMe₂CF₃) have been prepared by the reactions of vinyl silicon reagents Me₂Si(CHCH₂)₂ and PhSi(CHCH₂)₃ with known alkylidene compound PhMe₂C-CHMo(NAr)(OR_F3)₂. Complexes 1 and 2 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1 and 2 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and predominant cis-units content in the case of 2.     

{Ru-NO} and {Ru-NO} configurations in [Ru(trpy)(tmp)(NO)] (trpy = 2,2:6′,2′′-terpyridine, tmp = 3,4,7,8-tetramethyl-1,10-phenanthroline): An experimental and theoretical investigation

The ruthenium-nitrosyl complexes [Ru^II(trpy)(tmp)(NO⁺)](ClO₄)₃ ([4](ClO₄)₃) and [Ru^II(trpy)(tmp)(NO)](ClO₄)₂ ([5](ClO₄)₂) with {Ru-NO}⁶ and {Ru-NO}⁷ configurations, respectively (trpy = 2,2′:6′,2′′-terpyridine, tmp = 3,4,7,8-tetramethyl-1,10-phenanthroline) have been isotaled. The nitrosyl complexes [4]³⁺ and [5]²⁺ have been generated by following a stepwise synthetic procedure: [Ru^II(trpy)(tmp)(X)]ⁿ, X/n = Cl/+ (1⁺) → CH₃CN/2+ (2²⁺) → NO₂/+ (3⁺) → NO⁺/3+ (4³⁺) → NO/2+ (5²⁺). The single-crystal X-ray structures of two precursor complexes [1]ClO₄ and [3]ClO₄ have been determined. The DFT optimized structures of 4³⁺ and 5²⁺ suggest that the Ru-N-O geometries in the complexes are linear (177.9°) and bent (141.4°), respectively. The nitrosyl complexes with linear (4³⁺) and bent (5²⁺) geometries exhibit ν(NO) frequencies at 1935 cm⁻¹ (DFT: 1993 cm⁻¹) and 1635 cm⁻¹ (DFT: 1684 cm⁻¹), respectively. Complex 4³⁺ undergoes two successive reductions at 0.25 V (reversible) and −0.48 V (irreversible) versus SCE involving the redox active NO function, Ru^II-NO⁺ ? Ru^II-NO and Ru^II-NO → Ru^II-NO⁻, respectively, besides the reductions of trpy and tmp at more negative potentials. The DFT calculations on the optimized 4³⁺ suggest that LUMO and LUMO+1 are dominated by NO⁺ based orbitals of around 65% contribution along with partial metal contribution of ∼25% due to (dπ)Ru^II → π∗(NO⁺) back-bonding. The lowest energy transitions in 4³⁺ and 5²⁺ at 360 nm and 467 nm in CH₃CN (TD-DFT: 364 and 459 nm) have been attributed to mixed MLLCT transitions of tmp(π) → NO⁺(π∗), Ru(dπ)/tmp(π) → NO⁺(π^∗) and Ru(dπ)/NO(π) → trpy(π^∗), respectively. The paramagnetic reduced species 5²⁺ exhibits an anisotropic EPR spectrum with g₁ = 2.018, g₂ = 1.994, g₃ = 1.880 (〈g〉 = 1.965 and Δg = 0.138) in CH₃CN, along with ¹⁴N (I = 1) hyperfine coupling constant, A2 = 35 G at 110 K due to partial metal contribution in the singly occupied molecular orbital (DFT:SOMO:Ru (34%) and NO (53%)). Consequently, Mulliken spin distributions in 5²⁺ are calculated as 0.115 for Ru and 0.855 for NO (N, 0.527; O, 0.328). The reaction of moderately electrophilic nitrosyl center in 4³⁺ with the nucleophile, OH⁻ yields the nitro precursor, 3⁺ with the second-order rate constant value of 1.7 × 10⁻¹ M⁻¹ s⁻¹ at 298 K in CH₃CN-H₂O (10:1). On exposure to light (Xenon 350 W lamp) both the nitrosyl species, 4³⁺ ({Ru^II-NO⁺}) and 5²⁺ ({Ru^II-NO}) undergo photolytic Ru-NO bond cleavage process but with a widely varying k_NO, s⁻¹ (t_1/2, s) of 1.56 × 10⁻¹(4.4) and 0.011 × 10⁻¹(630), respectively.     

Formation and stabilization of five-coordinate iron(II) verdoheme analogues by axial weakly coordinating anion ligation. X-ray crystal structures of [(OEOPFe)2O](X)2 (X = AsF6, SbF6)

The effect of weakly coordinating anions, , as axial ligands on the formation and coordination chemistry of verdoheme analogues have been examined. Two new five-coordinate and stable iron(II) verdoheme analogues, [OEOPFe^IIX], where OEOP is the monoanion of octaethyloxoporphyrin and X = AsF₆ and SbF₆, have been isolated. The compounds have been characterized by different spectroscopic methods as well as elemental analysis. ¹H NMR spectroscopy and magnetic moment measurements show that the [OEOPFe^IIX] are paramagnetic and iron is five-coordinate. Exposure of dichloromethane solutions of [OEOPFe^IIX] (X = AsF₆ (2), SbF₆ (3)) to dioxygen result in their transformation into the μ-oxo bridged compounds, [(OEOPFe)₂O](X)₂ (X = AsF₆ (4), SbF₆ (5)). The structures of 4 and 5 have been determined by X-ray diffraction analysis, both are structurally similar with a P2₁/c space group in the monoclinic crystal system.     

Synthesis and structures of copper and gold complexes of the P,N ligands RNC(Bu)C(H)RPPh2 (R = SiMe3, H)

The reaction of the chelating P,N ligand RNC(Bu^t)CH(R)PPh₂ (R = SiMe₃) (1) with CuCl and CuCl₂ (probably by way of reduction to Cu(I) by the phosphine ligand) or Cu(NCCH₃)₄ClO₄ yielded the dimeric 1:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}Cl]₂ (2) or the monomeric 2:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}₂]ClO₄ (3), respectively. The presence of trace amounts of water during the reaction resulted in the successive cleavage of the two trimethylsilyl groups of the ligand and the formation of the monomeric chelate complexes [Cu{PPh₂CH(R)C(Bu^t)NH}₂]ClO₄ (4) and [Cu{PPh₂CH₂C(Bu^t)NH}₂]ClO₄ (5). Oxidation of 5 by atmospheric oxygen led to small quantities of the blue Cu(II) complex [Cu{(O)PPh₂CH₂C(Bu^t)NH}₂](ClO₄)₂ (6). The dimeric gold complexes [Au{PPh₂CH₂C(Bu^t)NH}]₂X₂ (X = BF₄, ClO₄) (7) were similarly obtained from the previously described Au{PPh₂CH(R)C(Bu^t)NR}Cl by replacing the covalently bound chlorine with the weakly coordinating anions in the presence of small quantities of water. The solution and solid state structures (except 5) of all complexes were determined by NMR spectroscopy and X-ray crystallography.     

Heterobimetallic Fe-Pd and Fe-Pt NCN pincer complexes (NCN = [C6H2(CH2NMe2)2-2,6])

The meta-diaminoaryl ferrocenes Fc-NCN-H (3) and Fc-CC-NCN-H (5) (Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe, NCN-H = C₆H₃(CH₂NMe₂)₂-3,5) can be used as precursors in the preparation of heterobimetallic transition metal complexes of structural type Fc-NCN-MX (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]⁻; MX = PdCl (7), PtCl (8), PtI (9)) and Fc-CC-NCN-MX (MX = PdCl (11), PdI (12), PtCl (13)), respectively. They are accessible by applying different synthesis procedures, including oxidative addition and metallation-transmetallation processes.Cyclovoltammetric studies show that the ferrocene moieties in 3, 5, 7-9 and 11-13 can reversibly be oxidised. The potential of the Fe(II)/Fe(III) redox couple decreases with increasing electron density at the NCN pincer unit. The use of 8 as a possible (electro)chemical sensor in the detection of SO₂ is discussed as well.The solid-state structures of 8 and 13 are reported. The crystals of 8 contain two molecules of 8 in the asymmetric unit. The plane of the C₆H₂ moiety is with 27.2(3)° and 38.2(3)° tilted towards the C₅H₄ entity, while in 13 an angle of 45.9(3)° can be found. The d⁸-electron configured platinum atoms possess a somewhat distorted square-planar surrounding, setup by two Me₂NCH₂ortho-substituents, the NCN C_ipso carbon atom and the chloride ligand.     

A new arylimido derivative of polyoxometalate (Bu4N)2[Mo6O17(NAr)2] [Ar = 2,6-(CH3)2C6H3]: Synthesis, structure and physicochemical properties

A novel bifunctionalized arylimido derivative of hexamolybdate, (Bu₄N)₂[Mo₆O₁₇(NAr)₂] [Ar = 2,6-(CH₃)₂C₆H₃] (1), in which the two 2,6-dimethylaniline groups are bounded to hexamolybdate at the cis positions, was synthesized by a facile reaction of α-octamolybdate with 2,6-dimethylaniline using DCC as a dehydration agent. The existence of strong non-typical C-H?O hydrogen bonds plays an important role in crystal structure stabilization of compound 1. The results of fluorescence spectra show that the formation of a covalent bond between 2,6-dimethylaniline molecule and hexamolybdate could efficiently quench the fluorescence intensity of 2,6-dimethylaniline molecule, with a fluorescence quencher efficiency of 87.7%. Thermal analysis results indicate that two substituted 2,6-(CH₃)₂C₆H₃ molecules bonding to the same cluster dissociated at different temperature, in well agreement with the different MoN bond length in compound 1. The electrochemical behavior of modified 1-CPE has been studied in detail. Compared with the conventional polyoxometalate (POM)-modified electrode, 1-CPE presents a merit of remarkable stability over 500 cycles due to the insolubility of the POM nanoparticles, which is especially important for practical applications.     

Syntheses and structures of two copper-molybdate complexes: The 3-D [Cu(4,4′-bpy)(MoO4)] and 1-D [Cu2(HDABCO)2(H2Mo8O27)] · 4H2O

Hydrothermal reaction of molybdenum oxide and copper(II) source in the presence of 4,4′-bipyridine (4,4′-bpy) afforded three-dimensional covalent framework [Cu^II(4,4′-bpy)(MoO₄)] (1), while reaction with 1,4-diazoniabicyclo[2,2,2]octane (DABCO) in place of 4,4′-bpy and addition of metal molybdenum resulted in one-dimensional chain-like compound . The copper in 1 is divalent and approximately shows trigonal bipyramidal geometry, while in 2 is monovalent and approximately shows T-shaped geometry. The structure of 1 has a three-dimensional pillar-layered framework constructed from bimetallic {CuMoO₄} layers bridged by bifunctional ligand 4,4′-bpy. Interestingly, the {CuMoO₄} layer in 1 consists of 16-membered {Cu₄Mo₄O₈} rings and 8-membered {Cu₂Mo₂O₄} rings, different from other reported {CuMoO₄} layers. The structure of 2 consists a one-dimensional chain that is attached by peripheral {Cu(HDABCO)}²⁺ units. The chain is constructed from octamolybdates through common corners.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Ru2(CO)4(OOCR)2L2 sawhorse-type complexes containing axial 5-(4-pyridyl)-10,15,20-triphenylporphyrin ligands

The thermal reaction of Ru₃(CO)₁₂ with various carboxylic acids (benzoic, 4-hydroxyphenylacetic, ferrocenic, stearic, oleic, 4-(octadecyloxy)benzoic) in refluxing tetrahydrofuran, followed by addition of 5-(4-pyridyl)-10,15,20-triphenylporphyrin (L), gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂L₂ (1: R = -C₆H₅, 2: R = -CH₂-p-C₆H₄OH, 3: R = -C₅H₄FeC₅H₅, 4: R = -(CH₂)₁₆CH₃, 5: R = -(CH₂)₇CHCH(CH₂)₇CH₃, 6: R = -p-C₆H₄O(CH₂)₁₇CH₃). Complexes 1-6 were characterised by IR, NMR, and ESI-MS as well as by elemental analysis. The UV-Vis spectra show the Soret band centred at 417 nm and the Q bands at 515, 550, 590 and 645 nm, respectively.     

Rhenium(IV) cyanate complexes: Synthesis, crystal structures and magnetic properties of NBu4[ReBr4(OCN)(DMF)] and (NBu4)2[ReBr(OCN)2(NCO)3]

Two new rhenium(IV) mononuclear compounds of formula NBu₄[ReBr₄(OCN)(DMF)] (1) and (NBu₄)₂[ReBr(OCN)₂(NCO)₃] (2) (NBu₄ = tetrabutylammonium cation, OCN = O-bonded cyanate anion, NCO = N-bonded cyanate anion and DMF = N,N-dimethylformamide) have been synthesized and their crystal structures determined by single-crystal X-ray diffraction. 1 crystallizes in the monoclinic system with the space group P2₁/n, whereas 2 crystallizes in the triclinic one with as space group. In both complexes the rhenium atom is six-coordinated, in 1 by four Br atoms in the equatorial plane, and two trans-oxygen atoms, one of a DMF molecule and another one from a cyanato group, while in 2 by one bromide anion and five cyanate ligands, two of which are O-bonded and three N-bonded, forming a somewhat distorted octahedral surrounding. Magnetic susceptibility measurements on polycrystalline samples of 1 and 2 in the temperature range 1.9-300 K are interpreted in terms of magnetically isolated spin quartets with large values of the zero-field splitting (|2D| is ca. 41.6 and 39.2 cm⁻¹ for 1 and 2, respectively).     

Halo-complexes of titanium(III): The thermochromic behaviour of [NBu4][TiCl4(THF)2]

TiCl₃(thf)₃ reacts with ACl (A = NBu₄, PPN; PPN = Ph₃PNPPh₃) in dichloromethane solution, affording the compounds A[TiCl₄(thf)₂] (A = NBu₄, 1; A = PPN, 2). Compound 1, dissolved in CH₂Cl₂, exhibits thermochromic behaviour which has been the subject of variable-temperature UV-Vis investigations.