Reaction of cyanamide and their derivatives with (η-C5H5)Mn(CO)3 and (η-C5H4CH3)Mn(CO)3

The reaction of cyanamide and its derivatives with the (η⁵-C₅H₅)Mn(CO)₂(THF) and (η⁵-C₅H₄CH₃)Mn(CO)₂(THF) complexes affords the cyanamide substituted complexes of types (η⁵-C₅H₅)Mn(CO)₂(NCN(R′)(R″)) (2a-d) and (η⁵-C₅H₄CH₃)Mn(CO)₂(NCN(R′)(R″)) (3a-e). All complexes were characterized by spectroscopy (¹H, ¹³C NMR, IR), elemental and mass spectroscopy analysis. Complex 2b (η⁵-C₅H₅)Mn(CO)₂(NCN(CH₃)₂) was additionally examined by single crystal X-ray structure determination.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Synthesis of some pentanuclear platinum clusters [Pt5(CO)6(L)4]. The X-ray structure of [Pt5(μ-CO)5(CO)(PCy3)4]

[Pt₅(μ-CO)₅(CO)L₄] (L = PPh₃1, PPh₂Bz 2, AsPh₃3, PEt₃4, PCy₃5) have been synthesized by reacting [Pt₃(μ-CO)₃(PR₃)₃] with H₂O₂ (1 and 2), by reduction of cis-[PtCl₂(CO)(PEt₃)] with Zn dust (4), and by the Zn reduction of [Pt₃(μ-CO)₃(PCy₃)₃] in the presence of [PtCl₂(CH₃CN)₂] (5). Complex 5 has not been observed previously and has been characterized by X-ray crystallography. Oxidation of the phosphine ligands with H₂O₂ is a new way to synthesize 1 and 2. The first complete NMR characterization of these complexes has also been achieved, and showed that these pentanuclear cluster complexes exhibit similar stereochemistries in solution and in the solid state. The observed ¹J_Pt-Pt values do not have any correlation with the corresponding bond lengths, again pointing out the irregular behaviour of such parameter in Pt complexes.     

A one-dimensional copper (II) coordination polymer [Cu3(ampym)2(μ1,1-N3)4(μ1,3-N3)2(dmf)2]n (ampym = 2-aminopyrimidine) containing both end-on and end-to-end azido bridges

A new polynuclear copper (II) complex, derived from the azido-bridging ligand and 2-aminopyrimidine, has been synthesized and its 3-D structure has been determined by X-ray diffraction methods at two different temperatures. The compound crystallizes in the triclinic system space group, with the central copper atom lying on an inversion centre. The crystal structure is built up by trinuclear units (each of them contains two double end-on azido bridges) linked through two azide ions in an end-to-end (EE) fashion, to yield the polymer chain [Cu₃(ampym)₂(μ_1,1-N₃)₄(μ_1,3-N₃)₂(dmf)₂]_n. Magnetic susceptibility measurement shows a ferromagnetic interaction above 30 K, whereas a weak anti-ferromagnetic interaction prevails in the range of 30-2 K.     

Hydrido-derivatives of [Ir4(CO)10(diphosphine)]: X-ray analyses of [Ir4H(CO)9(μ-Ph2PH(CH3)PPh2)] and [Ir4 H(CO)9(μ-Ph2P(CH2)nPPh2)] (n = 2, 3)

Some novel hydrido-anions of general formula [Ir₄H(CO)₉(μ-L-L)]⁻ (L-L = Ph₂PCH(CH₃)PPh₂, Ph₂P(CH₂)₂PPh₂, Ph₂P(CH₂)₃PPh₂ and Ph₂AsCH₂AsPh₂) have been obtained by the reaction of [Ir₄(CO)₁₀(μ-L-L)] with the base 1,8-diazabicyclo[5.4.0]undec-7-ene in wet dichloromethane. According to IR and ¹H, ³¹P and ¹³C NMR data at low temperature, these anionic derivatives display a single conformation in solution: three edge-bridging COs around the triangular basal face and both the hydride and the bidentate ligands located in axial positions relative to this face. The structures of four compounds were established by X-ray diffraction studies, which confirmed the configuration proposed on the basis of spectroscopic data.     

A Mn(II)–Mn(II) center in human prolidase

Human prolidase, the enzyme responsible for the hydrolysis of the Xaa-Pro/Hyp peptide bonds, is a key player in the recycling of imino acids during the final stage of protein catabolism and extracellular matrix remodeling. Its metal active site composition corresponding to the maximal catalytic activity is still unknown, although prolidase function is of increasing interest due to the link with carcinogenesis and mutations in prolidase gene cause a severe connective tissue disorder. Here, using EPR and ICP-MS on human recombinant prolidase produced in Escherichia coli (hRecProl), the Mn(II) ion organized in a dinuclear Mn(II)–Mn(II) center was identified as the protein cofactor. Furthermore, thermal denaturation, CD/fluorescence spectroscopy and limited proteolysis revealed that the Mn(II) is required for the proper protein folding and that a protein conformational modification is needed in the transition from apo- to Mn(II)loaded-enzyme. The collected data provided a better knowledge of the human holo-prolidase and, although limited to the recombinant enzyme, the exact identity and organization of the metal cofactor as well as the conformational change required for activity were proven.     

The azidopentacyanoferrate(III) ion as a tecton in constructing heterometallic complexes: Synthesis, crystal structure and magnetic properties of [Mn(valphen)(H2O)2]2[(H2O)(valphen)Mn(μ-CN)Fe(CN)4(N3)]·8H2O

By employing the common precursor Na₃[Fe(CN)₅(NH₃)]·3H₂O in a new synthetic approach, the azidopentacyanoferrate(III) ion has been isolated and structurally characterized as (Ph₄As)₂[Na(H₂O)₄][Fe(CN)₅(N₃)] 1. In order to confirm its building block ability, compound 1 has been reacted with the mononuclear complex [Mn(valphen)(H₂O)₂]ClO₄ (H₂valphen represents the Schiff base resulting from the condensation of o-vanillin with 1,2-phenylenediamine in a 2:1 M ratio) to afford the new Mn^III-Fe^III heterometallic system [Mn(valphen)(H₂O)₂]₂[(H₂O)(valphen)Mn(μ-CN)Fe(CN)₄(N₃)]·8H₂O 2. The crystal structure of compound 2 reveals a supramolecular assembly generated by [(H₂O)(valphen)Mn(μ-CN)Fe(CN)₄(N₃)]²⁻ dianions and discrete [Mn(valphen)(H₂O)₂]⁺ counterions. The dynamic magnetic measurements of compound 2 point to a slow relaxation of the magnetization.     

SS Bond-activation of diorganyl disulfide by anionic [Mn(CO)5]: crystal structures of [Mn(SC5H4NO)3] and [(CO)3Mn(μ-SR)3Co(μ-SR)3Mn(CO)3] (R=C6H4NHCOPh)

The SS bond-activation of diorganyl disulfide by the anionic metal carbonyl fragment [Mn(CO)₅]⁻ gives rise to an extensive chemistry. Oxidative decarbonylation addition of 2,2′-dithiobis(pyridine-N-oxide) to [Mn(CO)₅]⁻, followed by chelation and metal-center oxidation, led to the formation of [Mn^II(SC₅H₄NO)₃]⁻ (1). The effective magnetic moment in solid state by SQUID magnetometer was 5.88 μ_B for complex 1, which is consistent with the Mn^II having a high-spin d⁵ electronic configuration in an octahedral ligand field. The average Mn(II)S, SC and NO bond lengths of 2.581(1), 1.692(4) and 1.326(4) Å, respectively, indicate that the negative charge of the bidentate 1-oxo-2-thiopyridinato [SC₅H₄NO]⁻ ligand in complex 1 is mainly localized on the oxygen atom. The results are consistent with thiolate-donor [SC₅H₄NO]⁻ stabilization of the lower oxidation state of manganese (Mn(I)), while the O,S-chelating [SC₅H₄NO]⁻ ligand enhances the stability of manganese in the higher oxidation state (Mn(II)). Activation of SS bond as well as OH bond of 2,2′-dithiosalicylic acid by [Mn(CO)₅]⁻ yielded [(CO)₃Mn(μ-SC₆H₄C(O)O)₂Mn(CO)₃]²⁻ (4). Oxidative addition of bis(o-benzamidophenyl) disulfide to [Mn(CO)₅]⁻ resulted in the formation of cis-[Mn(CO)₄(SR)₂]⁻ (R=C₆H₄NHCOPh) which was employed as a chelating metallo ligand to synthesize heterotrinuclear [(CO)₃Mn(μ-SR)₃Co(μ-SR)₃Mn(CO)₃]⁻ (8) possessing a homoleptic hexathiolatocobalt(III) core.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

Sulfide-bridged aggregates from the metalloligand [Pt2(μ-S)2(PPh3)4] and β-diketonate complexes of cobalt(II) and zinc(II)

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a range of zinc(II) and cobalt(II) complexes ML₂, where L is a β-diketonate ligand CH₃COCHCOCH₃, PhCOCHCOPh, CF₃COCHCOTh (Th = 2-thienyl)] permits the synthesis of adducts [Pt₂(μ-S)₂(PPh₃)₄M(diketonate)]⁺, isolated as their salts in moderate yields. The cobalt and zinc acetylacetonate complexes were characterised by single-crystal X-ray diffraction studies, which reveal isomorphous structures, with tetrahedral heterometal centres.     

A novel tetranuclear hydrogenphosphate-bridged Cu(II) cluster. Synthesis, structure, spectroscopy and magnetism of [Cu4(dpyam)4(μ4,η-HPO4)2(μ-X)2]X2(H2O)6 (X = Cl, Br)

Two novel tetranuclear compounds with an unprecedented mode of a hydrogenphosphato bridge, [Cu₄(dpyam)₄(μ₄,η³-HPO₄)₂(μ-X)₂]²⁺ (in which dpyam = di-2-pyridylamine and X = Cl (1), Br (2)) have been synthesised and characterised structurally and magnetically. The Cu(II) ions in the structures each display a square-pyramidal geometry, with two tridentate hydrogenphosphato groups bridging four copper atoms in a μ₄,η³ coordination mode which is rarely found in hydrogenphosphate metal compounds. Each (different) pair of Cu(II) ions is additionally bridged by halide ions, with relatively long Cu-X distances (2.551(3)-2.604(3) Å for 1 and 2.707(1)-2.766(2) Å for 2) and subsequently also a small Cu-X-Cu angle (65.7(1)° and 65.1(1)° for 1 and 61.6(1)° and 62.4(1) for 2) and a large Cu-X-Cu angle (95.5(1)° and 96.5(1)° for 1 and 91.1(1)° and 92.6(1)° for 2). Cu?Cu distances in the tetranuclear units varies from 2.802(3) to 5.232(3) Å for 1 and from 2.834(1) to5.233(1) Å in 2. The lattice structures are stabilised by extensive intermolecular hydrogen bonds. The magnetic susceptibility measurements down to 5 K revealed a weak ferromagnetic interaction between the outer pairs of Cu(II) ions which vary from 22 to 46 cm⁻¹ in 1 and 12 to 33 cm⁻¹ in 2 and a moderately strong antiferromagnetic interaction between the inner Cu(II) ions of −79 cm⁻¹ in 1 and −83 cm⁻¹ in 2, via the Cu-O-P-O-Cu pathway.     

Ru2(CO)4(OOCR)2(PPh3)2 sawhorse-type complexes containing μ2-η-carboxylato ligands derived from biologically active acids

The thermal reaction of Ru₃(CO)₁₂ with the biologically active acids acetyl salicylic acid (Aspirin), α-methyl-4-(isobutyl)phenylacetic acid (Ibuprofen) and 3α,7α,12α-trihydroxy-5β-cholanic acid (cholic acid) in refluxing tetrahydrofuran, followed by addition of triphenylphosphine, gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂(PPh₃)₂ (1: R = C₆H₄-2-OCOMe, 2: R = CHMe-C₆H₄-4-Buⁱ, 3: C₂₃H₃₉O₃). The single-crystal structural analysis of 1 and 2 reveals a dinuclear Ru₂(CO)₄ sawhorse structure, the diruthenium backbone being bridged by the carboxylato ligands, while the two phosphine ligands occupy the axial positions at the ruthenium atoms. However, chiral carbon atoms in the carboxylic acid undergo racemisation during the thermal reaction.     

Reactivity of the bridged borylene complex [μ-BCl{η-C5H4Me)Mn(CO)2}2]

The reactivity of the bridged chloro borylene complex [μ-BCl{(η⁵-C₅H₄Me)Mn(CO)₂}₂] (2a) towards various protic reagents was studied. Reaction of 2a with isopropanol yielded the alkoxy borylene complex [μ-BOiPr{(η⁵-C₅H₄Me)Mn(CO)₂}₂] (3d) in very high yield. A further series of protic reagents HX (X=HS⁻, BF₄⁻, Co(CO)₄⁻) gave, in the presence of pyridine, the new amino borylene complex [1-(μ-B)-4-H-(NC₅H₅){(C₅H₄Me)Mn(CO)₂}₂] (5a), which represents the product of an unprecedented 1,4-hydroboration of pyridine. Complex 5a was fully characterised in solution by multinuclear NMR studies, in the solid state by X-ray diffraction, and was also subject to DFT-studies.     

A versatile entry into aqueous niobium chemistry: isolation and structure of the intermediate Nb4(μ2-O)2(μ2-OC2H5)4Cl4(OC2H5)4(HOC2H5)4

The reduction of ethanolic solutions of niobium pentachloride with zinc, followed by treatment with aqueous acids serves as a versatile entry into the aqueous solution chemistry of niobium. From the zinc-reduced solution, the major intermediate, Nb₄(μ₂-O)₂(μ₂-OC₂H₅)₄Cl₄(OC₂H₅)₄(HOC₂H₅)₄, was isolated and the crystal structure determined by X-ray crystallography. The complex crystallizes in the orthorhombic space group Pccn, with Z=4, a=21.0105(9), b=11.0387(5), c=19.1389(8), V=4438.9(3) ų, M_r=1090.19,R₁=0.0327 and wR₂=0.0876. The structure revealed a centrosymmetric tetrameric Nb(IV) complex, consisting of a pair of edge-sharing bi-octahedral Nb₂(μ₂-OC₂H₅)₄Cl₂(OC₂H₅)₂(HOC₂H₅)₂ units that are joined by two axial oxo ligands. The Nb-Nb distance of 2.7458(3) Å is consistent with a single metal-metal bond.     

Reactions of the complexes [Re2(CO)9(η-P-P)] (P-P=Ph2P(CH2)nPPh2, n=1-6) with Me3NO: formation of close-bridged complexes [Re2(CO)8(μ-P-P)] and phosphine oxide complexes [Re2(CO)9{P-P(O)}]

Reactions of [Re₂(CO)₁₀] with Me₃NO and diphosphines [Ph₂P(CH₂)_nPPh₂, n=1-6] yield mixtures of the monodentate-coordinated diphosphine complexes [Re₂(CO)₉(η¹-P-P)] (P-P=Ph₂P(CH₂)_nPPh₂, n=1-6) (yields 5-40%) and bridged dimers [{Re₂(CO)₉}₂(μ-P-P)] (5-50%). These complexes were isolated as either equatorial or axial isomers, or a mixture of two isomers. Reactions of the monodentate complexes with Me₃NO yield close-bridged complexes [Re₂(CO)₈(μ-P-P)] and phosphine oxide complexes [Re₂(CO)₉{P-P(O)}]. The structures of the close-bridged complexes 1 (n=3) and 2 (n=4), were determined by X-ray crystallography. The Re-Re bond in the close-bridged complex with the longest phosphine chain (n=6) is readily cleaved in CDCl₃ to give the complex [{cis-ReCl(CO)₄}₂(μ-dpph)] (3) as the product, the structure of which was also determined by X-ray crystallography.     

Hydraulic Conductivity (Lp) and Its Activation Energy (Ea), Cryoprotectant Agent Permeability (Ps) and ItsEa, and Reflection Coefficients (?) for Golden Hamster Individual Pancreatic Islet Cell Membranes

Long-term cryopreservation of islets of Langerhans would be advantageous to a clinical islet transplantation program. Fundamental cryobiology utilizes knowledge of basic biophysical characteristics to increase the understanding of the preservation process and possibly increase survival rate. In this study several of these previously unreported characteristics have been determined for individual islet cells isolated from Golden hamster islets. Using an electronic particle counting device and a temperature control apparatus, dynamic volumetric response of individual islet cells to anisosmotic challenges of 1.5 M dimethyl sulfoxide (DMSO) and 1.5 M ethylene glycol (EG) were recorded at four temperatures (8, 22, 28, and 37°C). The resulting curves were fitted using Kedem and Katchalsky equations which describe water flux and cryoprotectant agent (CPA) flux based on hydraulic conductivity (L_p), CPA permeability (P_s), and reflection coefficient (?) for the membrane. For Golden hamster islet cells,L_p,P_s, and ? for DMSO at 22°C were found to be 0.23 ± 0.06 μm/min/atm, 0.79 ± 0.32 × 10⁻³cm/min, and 0.55 ± 0.37 (n= 11) (mean ± SD), respectively. For EG at 22°C,L_pequaled 0.23 ± 0.06 μm/min/atm,P_sequaled 0.63 ± 0.20 × 10⁻³cm/min, and ? was 0.75 ± 0.17 (n= 9). Arrhenius plots (lnL_por lnP_sversus 1/temperature (K)) were created by adding the data from the other three temperatures and the resulting linear regression yielded correlation coefficients (r) of 0.99 for all four plots (L_pandP_sfor both CPAs). Activation energies (E_a) ofL_pandP_swere calculated from the slopes of the regressions. The values for DMSO were found to be 12.43 and 18.34 kcal/mol forL_pandP_s(four temperatures, totaln= 52), respectively. For EG,E_aofL_pwas 11.69 kcal/mol andE_aofP_swas 20.35 kcal/mol (four temperatures, totaln= 58).