DFT studies of the conversion of four mesylate esters during reaction with ammonia

The energetics of the Menshutkin-like reaction between four mesylate derivatives and ammonia have been computed using B3LYP functional with the 6-31+G** basis set. Additionally, MPW1K/6-31+G** level calculations were carried out to estimate activation barrier heights in the gas phase. Solvent effect corrections were computed using PCM/B3LYP/6-31+G** level. The conversion of the reactant complexes into ion pairs is accompanied by a strong energy decrease in the gas phase and in all solvents. The ion pairs are stabilized with two strong hydrogen bonds in the gas phase. The bifurcation at C2 causes a significant activation barrier increase. Also, bifurcation at C5 leads to noticeable barrier height differentiation. Both B3LYP/6-31+G** and MPW1K/6-31+G** activation barriers suggest the reaction 2 (2a?+?NH₃) to be the fastest in the gas phase. The reaction 4 is the slowest one in all environments.

C(4)-h and c(5)-h Tautomers of Amthamine and Histamine Monocations

Tautomers and conformers (T/C's) involving the C4 and C5 atoms of the thiazole or imidazole rings were characterized in amthamine (2-amino-5-(2'-aminoethyl)-4-methylthiazole) and histamine (4(5)-2'-aminoethylimidazole), respectively. Critical points of the potential energy surfaces were calculated at the RHF/6-31G** level, using analytical gradients. Conformers were also determined at the MP2/6-31G**//6-31G** and MP2/6-31G**//MP2/6-31G** levels. In amthamine, a gauche conformer of C(5)-H tautomer, I+, turns out to be the second most stable T/C in the gas phase in the RHF approach. MP2 calculations generally yield larger potential energy. Topology of the charge density shows internal electrostatic interactions between S1 ... N for some of the gauche conformers (I+ and L+). Transition state structures for conformational changes and internal proton transfer reactions have also been characterized. In histamine, the C(4)-H tautomers are more stable than the C(5) -H ones, and they have a much higher potential energy than the most stable tautomers of amthamine. N(1) C(i)-H tautomers present similar electronic features to those of amthamine. Internal hydrogen bonds (HyB) and the ring formed in the gauche structures with internal HyB's have been characterized by using the charge density topology procedures. MP2 results are approximately similar to the RHF results, especially with respect to the conformational angles, the potential energy being larger than that from the RHF wavefunction. MP2 distances of HyB's reveal stronger HyB's than the RHF ones.     

Study of the hydrogen bond in different orientations of adenine-thymine base pairs: An <Emphasis Type="Italic">ab initio</Emphasis> study

In order to gain deeper insight into structure, charge distribution, and energies of A-T base pairs, we have performed quantum chemical ab initio and density functional calculations at the HF (Hartree-Fock) and B3LYP levels with 3-21G*, 6-31G*, 6-31G**, and 6-31++G** basis sets. The calculated donor-acceptor atom distances in the Watson-Crick A-T base pair are in good agreement with the experimental mean values obtained from an analysis of 21 high resolution DNA structures. In addition, for further correction of interaction energies between adenine and thymine, the basis set superposition error (BSSE) associated with the hydrogen bond energy has been computed via the counterpoise method using the individual bases as fragments. In the Watson-Crick A-T base pair there is a good agreement between theory and experimental results. The distances for (N2...H23-N19), (N8-H13...O24), and (C1...O18) are 2.84, 2.94, and 3.63 A, respectively, at B3LYP/6-31G** level, which is in good agreement with experimental results (2.82, 2.98, and 3.52 A). Interaction energy of the Watson-Crick A-T base pair is -13.90 and -10.24 kcal/mol at B3LYP/6-31G** and HF/6-31G** levels, respectively. The interaction energy of model (9) A-T base pair is larger than others, -18.28 and -17.26 kcal/mol, and for model (2) is the smallest value, -13.53 and -13.03 kcal/mol, at B3LYP/6-31G** and B3LYP/6-31++G** levels, respectively. The computed B3LYP/6-31G** bond enthalpies for Watson-Crick A-T pairs of -14.4 kcal/mol agree well with the experimental results of -12.1 kcal/mol deviating by as little as -2.3 kcal/mol. The BSSE of some cases is large (9.85 kcal/mol) and some is quite small (0.6 kcal/mol).     

Quantum chemical investigation of intramolecular thione-thiol tautomerism of 1,2,4-triazole-3-thione and its disubstituted derivatives

The one step intramolecular thione-thiol tautomerism of 1,2,4-triazole-3-thione and its disubstituted derivatives has been studied through the use of electronic structure methods. Due to the absence of experimental data for the parent molecule of 1,2,4-triazole-3-thione the structure and energetics of aforementioned tautomers were derived using various basis sets and levels including HF, B3LYP, and MP2 methods. The gas phase results show that in all different levels of theory the most stable tautomer is the thione form. It has also been revealed that B3LYP/6-31G(d,p) level is quite well suited and reliable to investigate these kinds of tautomerism. To account the influence of substituents on the mentioned tautomerization, the tautomerism and conformational properties as well as vibrational analysis of 20 halophenyl and isopyridyl derivatives were investigated using B3LYP/6-31G(d,p) calculations. In all cases the calculations indicate that substituents have no considerable effects on relative stabilities and energy barriers for the thione-thiol proton transfer and the thione forms are the predominant species in the gas phase. In order to figure out the relative stabilities of the species involved in the tautomerism, geometrical and natural bond orbital (NBO) analyses have been employed. It has also been shown that the computed vibrational frequencies of tautomers with different scaling factors could be used to interpret the vibrational frequencies in IR spectrum of similar species.     

Tautomeric energetics of xanthine oxidase substrates: xanthine, 2-oxo-6-methylpurine, and lumazine

The stability of the tautomers of each of the three important substrates of xanthine oxidase, xanthine, 2-oxo-6-methylpurine, and lumazine, was examined by quantum mechanical calculations. The geometries of these tautomers were optimized at the AM1, Hartree-Fock (HF/6-31G), and hybrid Hartree-Fock/density functional theory (B3LYP/6-31G(d)) levels of theory. The single point energies of some of the more stable tautomers for each of the substrates were calculated at the B3LYP/6-311 +G(2d,p) level of theory. The Conductor Polarized Continuum Model (CPCM) was used to evaluate the solvent effects on the relative stabilities of these tautomers. The calculations clearly identify the lowest energy tautomeric form for xanthine and lumazine. On the other hand, there appear to be three tautomers for 2-oxo-6-methylpurine, with only minor energetic differences in vacuo. In water, however, only one of them predominates. The lowest energy tautomers presumably represent the predominant tautomeric forms at the molybdenum center of xanthine oxidase during catalysis. Implications of these computational results are discussed in the context of enzyme catalysis.     

Structural, IR, and EPR studies of the bis(methoxyacetato)diaquo-copper(II) complex

The structure, stability, and the IR, and EPR spectroscopic properties of bis(methoxyacetato)diaquo-copper(II) were studied both experimentally using FT-IR and theoretically using B3LYP/6-31G**, B3LYP/6-311G, BWP91/6-31G** methods. The same approaches were used to calculate the harmonic frequencies and to compare them to the experimental solid state values. The g-tensors are calculated using the NMR/GIAO computational method.     

Theoretical potential functions and vibrational analysis for halocarbonyl azides CXO-NNN (X=F,Cl and Br)

The structural stability of halocarbonyl azides CXO-NNN (X=F, Cl and Br) was investigated by DFT and MP2 calculations using the 6-311++G** basis set. From the calculations, the molecules were found to have an s-cis<--> s-trans conformational equilibrium with cis being the lower -energy form. Full energy optimizations were carried out for the transition states and the minima at the B3LYP/6 -311++G** and MP2/6 -311++G** levels, from which the rotational barriers were calculated to be of the order 8-10 kcal x mol(-1). The vibrational frequencies were computed at the DFT -B3LYP level and the vibrational assignments for the normal modes of the stable conformers were made on the basis of normal coordinate calculations.     

The influence of the peptide bond on the conformation of amino acids: a theoretical and FT-IR matrix-isolation study of N-acetylproline

A combined experimental matrix-isolation FT-IR and theoretical study has been performed to investigate the conformational behavior of N-acetylproline. The conformational landscape of N-acetylproline was explored using successively higher computational methods, i.e. HF, DFT(B3LYP) and finally MP2. The exploration resulted in 10 conformations with a relative energy difference smaller than 22 kJ.mol(-1) at the HF/3-21G level of theory. These conformations led to six different conformations after DFT(B3LYP) optimizations. Further optimization at the MP2/6-31++G** level of theory resulted in the same six conformations, all of them with an energy difference smaller than 11.5kJ.mol(-1). One conformation with an intramolecular H-bond was found which was energetically the most favorable conformation. The vibrational and thermodynamical features were calculated using the DFT and MP2 methodologies. In the experimental matrix-isolation FT-IR spectrum, the most stable conformation was dominant and at least two non-H-bonded conformations could be identified. An experimental rotamerization constant between the H-bonded and the other non-H-bonded conformations was estimated and appeared to agree reasonably well with the theoretical MP2 predictions. Some new spectral features of N-acetylproline compared to proline were discovered which might be used to discriminate between the acetylated and non-acetylated form.     

Evaluation of several economical computational methods for geometry optimization of phosphorus acid derivatives

Several economical methods for geometry optimisation, applicable to larger molecules, have been evaluated for phosphorus acid derivatives. MP2/cc-pVDZ and B3LYP/6-31+G(d) geometry optimizations are used as reference points, results from geometry optimizations for other methods and their subsequent single point energy calculations are compared to these references. The geometries from HF/MIDI! optimizations were close to those of the references and subsequent single point energies with B3LYP/6-31+G(d,p) or EDF1/6-31+G(d) gave a mean average deviation (MAD) of less than 0.5 kcal mol-1 from those obtained with the reference geometries.     

QM/MM study of the active site of free papain and of the NMA-papain complex.

Hybrid quantum mechanical/molecular mechanical (QM/MM) calculations using restricted and unrestricted Hartree-Fock and B3LYP ab initio (QM) and Amber force field (MM), respectively, have been applied to study the catalytic site of papain in both free and substrate bonded forms. Ab initio geometry optimizations have been performed for the active site of papain and the N-methyl-acetamide (NMA)-papain complex within the molecular mechanical treatment of the protein environment. A covalent tetrahedral intermediate structure could be obtained only when the amide N atom of the substrate molecule was protonated through a proton transfer from the His-159 in the catalytic site. Our results support the previous assumption that a proton transfer from His-159 to the amide N atom of the substrate occurs prior to or concerted with the nucleophilic attack of the Cys-25 sulfur atom to the carbonyl group of the substrate. The electron correlation effect will reduce the proton transfer barrier. Therefore, this proton transfer can be easily observed in the B3LYP/6-31G* calculations. The HF/6-31G* method overestimates the reaction barrier against this proton transfer. The sulfur atom of Cys-25 and the imidazole ring of His-159 are found to be coplanar in the free form of the enzyme. However, the rotation of the imidazole ring of His-159 was observed during the formation of the tetrahedral intermediate. Without the papain environment, the coplanar thiolate-imidazolium ion pair RS-...ImH+ is much less stable than the neutral form of RSH....Im. Within the protein environment, however, the thiolate-imidazolium ion pair becomes more stable than its neutral form by 4.1 and 0.4 kcal/mol in HF/6-31G* and B3LYP/6-31G* calculations, respectively. The barrier of proton transfer from S-H group of Cys-25 to the imidazole ring of His-159 was reduced from 22.0 kcal/mol to 15.2 kcal/mol by the protein environment in HF/6-31G* calculations. This barrier is found to be much smaller (2.5 kcal/mol) in B3LYP/6-31G* calculations.     

Variations of the tautomeric preferences and π-electron delocalization for the neutral and redox forms of purine when proceeding from the gas phase (DFT) to water (PCM)

Quantum-chemical calculations were performed for all possible nine neutral tautomers of purine and their oxidized and reduced forms in water {PCM//DFT(B3LYP)/6?311+G(d,p)} and compared to those in the gas phase {DFT(B3LYP)/6?311+G(d,p)}. PCM hydration influences geometries, π-electron delocalization, and relative energies of purine tautomers in different ways. Generally, the harmonic oscillator model of electron delocalization (HOMED) indices increase when proceeding from the gas phase to aequeous solution for the neutral and redox forms of purine. Their changes for the neutral and oxidized tautomers are almost parallel to the relative energies showing that aromaticity plays an important role in the tautomeric preferences. Tautomeric stabilities and tautomeric preferences vary when proceeding from the gas phase to water indicating additionally that intra- and intermolecular interactions affect tautomeric equilibria. The tautomeric mixture of neutral purine in the gas phase consists mainly of the N9H tautomer, whereas two tautomers (N9H and N7H) dominate in water. For oxidized purine, N9H is favored in the gas phase, whereas N1H in water. A gain of one electron dramatically changes the relative stabilities of the CH and NH tautomers that C6H and C8H dominate in the tautomeric mixture in the gas phase, whereas N3H in water. These variations show exceptional sensitivity of the tautomeric purine system on environment in the electron-transfer reactions.     

Linear free energy relationship for the anomeric effect: MP2, DFT and ab initio study of 2-substituted-1,4-dioxanes

The anomeric effect of 2-substituted 1,4-dioxane derivatives was calculated and compared with the values for substituted cyclohexane. The bond lengths, bond angles, torsion angles, and relative energies of axial and equatorial conformers of 2-substituted 1,4-dioxanes were calculated by the second-order Møller–Plesset (MP2), density functional theory (DFT/B3LYP), and Hartree–Fock (HF) methods using 6-31G^∗ basis set. The energy differences between the axial and equatorial conformers, endo and exo-anomeric effects, repulsive non-bond and H-bonding interactions were investigated. A linear free energy relationship (LFER) between calculated (MP2/6-31G^∗) anomeric effect and inductive substituent constants (σ_I) was obtained for 2-substituted-1,4-dioxanes (slope = 6.19 and r² = 0.967). The calculated energy differences indicate lower equatorial orientation for 2-substituted-1,4-dioxanes compared to the 2-substituted-tetrahydropyrans. The contribution of resonance, hyperconjugation, inductive, steric, hydrogen bonding, electrostatic interaction, and level of theory influences the anomeric effect.     

EVALUATION OF SEVERAL ECONOMICAL COMPUTATIONAL METHODS FOR GEOMETRY OPTIMISATION OF PHOSPHORUS ACID DERIVATIVES

Several economical methods for geometry optimisation, applicable to larger molecules, have been evaluated for phosphorus acid derivatives. MP2/cc-pVDZ and B3LYP/6-31+G(d) geometry optimisations are used as reference points, results from geometry optimisations for other methods and their subsequent single point energy calculations are compared to these references. The geometries from HF/MIDI! optimisations were close to those of the references and subsequent single point energies with B3LYP/6-31+G(d,p) or EDF1/6-31+G(d) gave a mean average deviation (MAD) of less than 0.5 kcal mol^?1 from those obtained with the reference geometries.     

DFT study of the gas phase proton transfer in guanine assisted by water, methanol, and hydrogen peroxide

A computational study of hydrogen-bonded complexes between the oxo-/hydroxo-amino N7/9H tautomers of guanine and water, methanol, and hydrogen peroxide has been performed at the B3LYP/6-31+G(d) level of theory. The mechanisms of the water-, methanol-, and hydrogen peroxide-assisted proton transfers in guanine were studied and compared with the intramolecular proton transfer in guanine in the gas phase. It was found that the assisted proton transfers pass through about three times lower energy barriers than those found for isolated guanine tautomers. Figure DFT study of the gas phase proton transfer in guanine assisted by water, methanol and hydrogen peroxide     

H-bonded complexes between acetylacetone and two molecules of methanol: HF and DFT level study

Five stable H-bonded complexes (supersystems) between acetylacetone and two methanol molecules were investigated at the B3LYP and HF levels of theory using the 6-311G** and 6-11++G** basis sets. The most stable complex was found as the one with the highest relative bonding and interaction energies. All vibrational frequencies resulting from calculations with the 6-311++G** basis set were compared with the recorded IR spectrum of acetylacetone/methanol mixture in a molar ratio 1:2.     

DFT and MP2 study of low barrier proton transfer in hydrazide schiff base tautomers via water bridges and in the gas

MP2 and DFT studies were performed on the tautomers of N′-ethylideneacetohydrazide in different environments including gas phase, continuum solvent and microhydrated environment. The ground electronic state structures of the tautomers were optimized at the MP2 and B3LYP levels of theory using 6-311++G(d,p), separately. The optimized geometries of the transition states of different tautomerism processes, which occur through the proton transfer (PT) reaction, were determined using the QST3 approach at the same levels of theory. The same stability order as T1Z〉 T1E〉 T2ZE〉 T2ZZ〉 T2EE〉 T2EZ〉 T6〉 T4E was found for the tautomers in the gas phase, continuum solvent and microhydrated environment for both B3LYP and MP2 levels of theory. In addition, the variations of the Gibbs free energies of tautomeric processes, the activation Gibbs free energies of the forward and reverse tautomeric processes with the polarity of the solvent (in continuum solvent model) and the number of water molecules (in microhydrated environment) were investigated. It was found that the reverse tautomeric process is more favorable in all considered environments thermodynamically and kinetically. In addition, it was shown that the rate constants of the reverse and forward considered tautomeric processes decrease with the solvent polarity in the continuum solvent model and the process becomes more difficult than the gas phase. The opposite trend is seen in the microhydrated environment.     

Structure and the energy of base pairing in non-natural bases of nucleic acids: the azaguanine-cytosine and azaadenine-thymine base pairs

Watson-Crick optimized geometries and the energies of base pairing for the natural pairs of nucleic bases: adenine-thymine (AT) and guanine-cytosine (GC) have been recalculated by ab initio methods in order to compare results to those found for the non-natural azaadenine-thymine (AAT) and azaguanine-cytosine (AGC) pairs. Geometry optimizations carried out at the HF/6-31G** level and energies obtained at MP2/6-31G**, show that AAT and AGC have hydrogen bonding patterns similar to the natural AT and GC and that the interaction energies (DeltaH0int) for the former are ca. 7 kcal/mol more stable than the latter. Accordingly, the pairs based on azapurines would be favored with respect to the natural pairs. Some possible explanations why nature does not use extensively the azabases in base pairing are given.     

Racemization of the gastrointestinal antisecretory chiral drug esomeprazole magnesium via the pyramidal inversion mechanism: A theoretical study

The pyramidal inversion mechanisms of the 6‐methoxy and the 5‐methoxy tautomers of (S)‐omeprazole were studied, employing ab initio and DFT methods. The conformational space of the model molecule (S)‐2‐[(3‐methyl‐2‐pyridinyl)methyl]sulfinyl‐1H‐benzimidazole was calculated, with respect to rotations around single bonds, at the B3LYP/6‐311G(d,p) level. All of the resulting conformations were used as starting points for full optimizations of (S)‐omeprazole, at B3LYP/6‐31G(d), B3LYP/6‐311G(d,p), B3LYP/6‐311++G(d,p), B3LYP/6‐311G(2df,2pd), MP2/6‐31G(d), and MP2/6‐311G(d,p) levels. Four distinct pathways were found for enantiomerization via the pyramidal inversion mechanism for each of the tautomers of (S)‐omeprazole. Each transition state, in which the sulfur, the oxygen and the two carbon atoms connected directly to the sulfur are in one plane, connects two diastereomeric minima. The enantiomerization is completed by free rotation around the sulfur–methylene bond, and around the methylene–pyridine ring bond. The effective Gibbs' free energy barrier for racemization ΔG of the two tautomers of (S)‐omeprazole are 39.8 kcal/mol (5‐methoxy tautomer) and 40.0 kcal/mol (6‐methoxy tautomer), indicating that the enantiomers of omeprazole are stable at room temperature (in the gas phase). The 5‐methoxy tautomer of (S)‐omeprazole was found to be slightly more stable than the 6‐methoxy tautomer, in the gas phase. The energy barrier (ΔG^?) for the(S,M) (S,P) diastereomerization of (S)‐omeprazole due to the rotation around the pyridine chiral axis was very low, 5.8 kcal/mole at B3LYP/6‐311G(d,p). Chirality 2010. © 2010 Wiley‐Liss, Inc.     

A theoretical study of the cis-syn pyrimidine dimers in the gas phase and water cluster and a tautomer-bypass mechanism for the origin of UV-induced mutations

A quantum mechanical study of all cis-syn cyclobutane pyrimidine photodimers including the normal and rare tautomeric forms of bases has been performed using the ab initio method at HF/6-31G(d.p), MP2(fc)//HF/6-31G(d,p) and MP2(fc)/6-31G(d,p) levels. A puckering angle of the cyclobutyl ring and twist angle of pyrimidine rings with respect to each other is well described by these calculations. It is predicted that in the gas phase all photodimers containing the rare imino form of cytosine are more stable than those containing its normal form. The Monte Carlo simulations show that the dimer containing the imino form of cytosine is more stabilized by water cluster than that containing its amino forms. The possible biological significance stems from the fact that the cytosine in the dimer directs the incorporation of adenine in the complementary strand during replicative bypass. Data obtained point to the cytosine tautomerism as a possible mechanism for the origin of UV-induced mutation.     

Ab initio computational insight into the ion-pair SN2 reaction of lithium isothiocyanate and methyl fluoride in the gas phase and in acetone solution

The ion-pair S_N2 reaction LiNCS + CH₃F with two mechanisms, inversion and retention, was investigated at the MP2(full)/6-311+G**//HF/6-311+G** level in the gas phase and in acetone solution. All HF-optimized structures were confirmed by vibrational frequency analysis. Based on IRC analyses, eight possible reaction pathways in the title reaction are proposed. The inversion mechanism through a six-membered-ring transition-state structure is the most favorable. Methyl thiocyanate should form preferentially in the gas phase and the more stable methyl isothiocyanate will be the main product in CH₃COCH₃. The retardation of the reaction in CH₃COCH₃ solution was attributed to the differences in the solvation free energies in the separated reactants and transition structures. All of the theoretical results are consistent with the experiment.