Standardization of hyphal growth inhibition rate as a means of evaluating Microsporum spp. in vitro susceptibility to terbinafine, griseofulvin, and ciclopiroxolamine

Reference methods for antifungal susceptibility tests recommend the use of conidia as inoculum. However, some isolates produce few conidia, while the invasive form of filamentous fungi in general is hyphae making susceptibility tests infeaseble. These facts suggest that other than conidia broth dilution method is required for susceptibility tests. The aim of this study was to clarify if the hyphal growth inhibition rate could be used as a method of determining the antifungal susceptibility of genus Microsporum. For this reason, a method which traces hyphal tips automatically and measures their growth rate was standardized for Microsporum spp. Control growth curves and test growth curves obtained by real-time observation of the hyphae groups responses to different concentrations of terbinafine, griseofulvin, and ciclopiroxolamine were used to compare with minimum inhibitory concentrations (MICs) obtained by conidia broth microdilution method. A visible reduction in the growth inhibition rate was observed when hyphal activity was evaluated using the third or fourth serial two-fold dilution below the MIC determined by broth microdilution for terbinafine and ciclopiroxolamine. For griseofulvin, this reduction occurred after the fifth dilution below the MIC. This study highlights the importance of the inoculum type used to determine the in vitro susceptibility of Microsporum strains. We conclude that measurement of hyphal growth inhibition, despite being time consuming, could be a suitable method for evaluating antifungal susceptibility, particularly for fungi as Microsporum spp. that produce a small (or not at all) number of conidia.     

Susceptibility testing: inoculum size dependency of inhibition using the Colworth MIC technique

The minimum inhibitory concentration, MIC, is an accepted and well used criterion for measuring the susceptibility of organisms to inhibitors. Many factors influence the MIC value obtained, including temperature, inoculum size and type of organism. A modification of the method developed in this laboratory to obtain inhibition profiles of antimicrobials was used to examine the effect of inoculum size on the degree of inhibition observed with respect to inhibitor concentration. The data obtained enabled the production of an empirical model of inhibition, based on a Gompertz function, relating the level of growth observed to both the inoculum size and concentration of the inhibitor. The inoculum size dependencies of phenethyl alcohol, phenoxyethanol, p-chloro-m-cresol, trichloro-phenol, thymol and dodecyltrimethylammmonium bromide against Staphylococcus aureus were obtained.     

Effect of the Inoculum Size on Carbapenem Susceptibilities of β-Lactamase-Negative,Ampicillin-Resistant <Emphasis Type="Italic">Haemophilus influenzae</Emphasis>

A higher inoculum size of β-lactamase-positive Haemophilus influenzae is reported to increase minimum inhibitory concentrations (MICs) for β-lactams. However, the effect of inoculum size of β-lactamase-negative, ampicillin-resistant H. influenzae (BLNAR) on MICs for carbapenems has not been investigated. This study evaluated the effect of inoculum size on MICs for carbapenems and other β-lactams in nine clinical isolates of BLNAR. The MICs were determined by both the standard method described by the Clinical and Laboratory Standards Institute (final inoculum size of 5 × 10⁵ colony-forming units [CFU]/ml) and a modified method (final inoculum size of 5 × 10⁶ CFU/ml) using viable cell counts. The findings showed that the higher inoculum size increased MICs for imipenem, meropenem, panipenem, biapenem, ampicillin, ceftazidime, and ceftriaxone. The inoculum effect (4 log₂ dilution or a greater increase in the MIC) with imipenem, meropenem, panipenem, and biapenem was found in three, five, two, and two isolates, respectively. The magnitude of the inoculum effect for panipenem significantly increased with the levels of MICs, but correlation between them for the others was not statistically significant. The mutations of penicillin-binding protein genes had little relevance to the reduced susceptibility to carbapenems or to the magnitude of the inoculum effect. These results suggest that MIC determination using turbidity can produce interpretive errors in the antimicrobial susceptibility testing of BLNAR for carbapenems because of their inoculum effect. Thus, accurate adjustment of inoculum size, such as viable cell count, is helpful for confirming the true MICs when the isolates are interpreted as “resistant” by turbidity-based MIC determination.     

Evaluation of a new method for antifungal susceptibility testing for azoles

The interpretation of the end points in azole antifungal drug susceptibility testing is challenging, in part due to incomplete growth inhibition of Candida species. Since the reference Clinical and Laboratory Standards Institute (CLSI) broth microdilution method have limitation with azoles, a new modification of the CLSI microdilution protocol was evaluated. We measure the decrease in growth rate (μ) of exponentially growing cultures in accordance to different azole concentrations at time intervals up to 10 h. Using 15 different Candida strains, an overall agreement within ± 2 dilutions by the CLSI method at 24 h in RPMI and the μ-dependent method for three antifungal agents (fluconazole- itraconazole and voriconazole) was achieved. MIC measurement by the new method was less sensitive to the medium used or the inoculum size applied. The presented data suggested that, measuring the in vitro inhibition kinetics at the logarithmic phase could have advantages for addressing susceptibility testing toward azoles.     

Susceptibility Screening of Hyphae-Forming Fungi with a New, Easy, and Fast Inoculum Preparation Method

In vitro susceptibility testing of clinically important fungi becomes more and more essential due to the rising number of fungal infections in patients with impaired immune system. Existing standardized microbroth dilution methods for in vitro testing of molds (CLSI, EUCAST) are not intended for routine testing. These methods are very time-consuming and dependent on sporulating of hyphomycetes. In this multicentre study, a new (independent of sporulation) inoculum preparation method (containing a mixture of vegetative cells, hyphae, and conidia) was evaluated. Minimal inhibitory concentrations (MIC) of amphotericin B, posaconazole, and voriconazole of 180 molds were determined with two different culture media (YST and RPMI 1640) according to the DIN (Deutsches Institut für Normung) microdilution assay. 24 and 48?h MIC of quality control strains, tested per each test run, prepared with the new inoculum method were in the range of DIN. YST and RPMI 1640 media showed similar MIC distributions for all molds tested. MIC readings at 48 versus 24?h yield 1 log₂ higher MIC values and more than 90?% of the MICs read at 24 and 48?h were within ±2 log₂ dilution. MIC end point reading (log_{2 MIC-RPMI 1640}?log_{2 MIC-YST}) of both media demonstrated a tendency to slightly lower MICs with RPMI 1640 medium. This study reports the results of a new, time–saving, and easy-to-perform method for inoculum preparation for routine susceptibility testing that can be applied for all types of spore-/non-spore and hyphae-forming fungi.     

Antibiotic Susceptibility Patterns of Recent Isolates of Corynebacterium diphtheriae

A variety of factors which might affect zone sizes were studied with strains of Corynebacterium diphtheriae; a standard disc method for antimicrobial sensitivity testing was used. Moderate variations in inoculum size, inoculum preparation, and pH of Mueller Hinton agar (MHA) did not appreciably affect zone sizes. The addition of blood to MHA was necessary to insure the growth of all C. diphtheriae strains on all lots of MHA. Zone diameters on MHA with blood were consistently 4 to 9 mm smaller than on plain MHA; however, zone diameters were within the sensitive range for seven antibiotic discs used on both media. Minimal inhibitory concentration (MIC) values for penicillin, erythromycin, and rifampin were determined by a plate dilution method. The geographical source, toxigenicity, and type of the strains showed no significant correlation with MIC values or zone diameters for eight antibiotic discs. When MIC values were compared to obtainable blood levels, all of the strains appeared to be sensitive with MIC values of 相似文献   

Use of spectrophotometric reading for in vitro antifungal susceptibility testing of Aspergillus spp

A comparative study of visual and spectrophotometric MIC endpoint determinations for antifungal susceptibility testing of Aspergillus species was performed. A broth microdilution method adapted from the National Committee for Clinical Laboratory Standards (NCCLS) was used for susceptibility testing of 180 clinical isolates of Aspergillus species against amphotericin B and itraconazole. MICs were determined visually and spectrophotometrically at 490 nm after 24, 48, and 72 h of incubation, and MIC pairs were compared. The agreement between the two methods was 99% for amphotericin B and ranged from 95 to 98% for itraconazole. It is concluded that spectrophotometric MIC endpoint determination is a valuable alternative to the visual reference method for susceptibility testing of Aspergillus species.     

Evaluation of a scanner-assisted colorimetric MIC method for susceptibility testing of gram-negative fermentative bacteria

We describe the ScanMIC method, a colorimetric MIC method for susceptibility testing of gram-negative fermentative bacteria. The method is a slight modification of the National Committee for Clinical Laboratory Standards (NCCLS) recommended broth microdilution method that uses a redox indicator 2,3,5-triphenyltetrazolium chloride (TTC) to enhance the estimate of bacterial growth inhibition in a microplate and a flatbed scanner to capture the microplate image. In-house software was developed to transform the microplate image into numerical values based on the amount of bacterial growth and to generate the MICs automatically. The choice of indicator was based on its low toxicity and ease of reading by scanner. We compared the ScanMIC method to the NCCLS recommended broth microdilution method with 197 coliform strains against seven antibacterial agents. The interpretative categorical agreement was obtained in 92.4% of the assays, and the agreement for MIC differences (within +/-1 log(2) dilution) was obtained in 96% for ScanMIC versus broth microdilution and 97% for a two-step incubation colorimetric broth microdilution versus the broth microdilution method. The method was found to be labor-saving, not to require any initial investment, and to show reliable results. Thus, the ScanMIC method could be useful for epidemiological surveys that include susceptibility testing of bacteria.     

Effect of Inoculum Size on In Vitro Susceptibility Testing with Lincomycin

There is disagreement in the literature as to whether lincomycin is primarily a bacteriostatic or a bactericidal agent against gram-positive cocci and also regarding the levels of activity of this agent against susceptible microorganisms. These questions were examined in a study of the effect of inoculum size on the results of tube dilution susceptibility determinations with lincomycin against 49 clinical isolates of Staphylococcus aureus and 25 strains of streptococci and pneumococci. Lincomycin was both highly active and bactericidal when tested against 40 strains of S. aureus with inocula containing a maximum of 10(4) cells per ml [median minimal inhibitory concentration (MIC), 0.78 mug/ml; median minimal bactericidal concentration (MBC), 1.56 mug/ml]. With inocula of 10(5) cells per ml, lincomycin was primarily bacteriostatic (median MIC, 1.56 mug/ml; median MBC, 12.5 mug/ml). There were further decreases in inhibitory levels and significant losses of bactericidal activity when inocula containing more than 10(7) cells were tested (median MIC, 3.13 mug/ml; median MBC > 100 mug/ml). Similar measurements with streptococci and pneumococci revealed a lesser effect of inoculum size. The mean MBC value for alpha-hemolytic streptococci increased from 0.40 to 1.05 mug/ml with an increase in inocula from 10(4) to 10(6) cells per ml, but without a marked increase in MIC values. Similar results were obtained for beta-hemolytic streptococci and pneumococci.     

Evaluation of a Scanner-Assisted Colorimetric MIC Method for Susceptibility Testing of Gram-Negative Fermentative Bacteria

We describe the ScanMIC method, a colorimetric MIC method for susceptibility testing of gram-negative fermentative bacteria. The method is a slight modification of the National Committee for Clinical Laboratory Standards (NCCLS) recommended broth microdilution method that uses a redox indicator 2,3,5-triphenyltetrazolium chloride (TTC) to enhance the estimate of bacterial growth inhibition in a microplate and a flatbed scanner to capture the microplate image. In-house software was developed to transform the microplate image into numerical values based on the amount of bacterial growth and to generate the MICs automatically. The choice of indicator was based on its low toxicity and ease of reading by scanner. We compared the ScanMIC method to the NCCLS recommended broth microdilution method with 197 coliform strains against seven antibacterial agents. The interpretative categorical agreement was obtained in 92.4% of the assays, and the agreement for MIC differences (within ±1 log₂ dilution) was obtained in 96% for ScanMIC versus broth microdilution and 97% for a two-step incubation colorimetric broth microdilution versus the broth microdilution method. The method was found to be labor-saving, not to require any initial investment, and to show reliable results. Thus, the ScanMIC method could be useful for epidemiological surveys that include susceptibility testing of bacteria.     

Comparative study of in vitro methods to analyse the antifungal activity of propolis against yeasts isolated from patients with superficial mycoses

AIM: To test a total of 15 strains belonging to four species of yeasts by different in vitro methods against propolis and itraconazole (ITC). METHODS AND RESULTS: Three methods were compared for susceptibility testing of yeast isolates to propolis: disc diffusion method, agar dilution method and National Committee for Clinical Laboratory Standards (NCCLS, M27A) broth microdilution method. ITC was selected as the antifungal agent for comparison study. Using the broth microdilution method, the geometric mean for MIC (microg ml(-1)) with regard to all isolates was < or =0.06 for propolis and < or =0.35 for ITC. The broth microdilution and the agar dilution methods were in good agreement (75%) for propolis against yeasts isolated from patients with superficial mycoses. Using the diffusion method, all strains showed a broad zone of inhibition at the first available reading time (24 or 48 h). An increase of MIC values was accompanied by a decrease of growth inhibition zone diameter. A favourable correlation was found between MIC and inhibition zone around the disc for propolis sample and the correlation coefficient was: r = -0.626 (P < 0.01). CONCLUSIONS: This study suggests the potential value of the agar dilution and disc diffusion method as a convenient alternative method for testing of yeasts to propolis. SIGNIFICANCE AND IMPACT OF THE STUDY: This study demonstrated that propolis and ITC were very active against yeasts from patients with superficial mycoses. The other prominent finding in this study is that RPMI 1640 with L-glutamine was the available broth for the in vitro susceptibility testing of yeasts.     

Antifungal susceptibility profiles of <Emphasis Type="Italic">Coccidioides immitis</Emphasis> and <Emphasis Type="Italic">Coccidioides posadasii</Emphasis> from endemic and non-endemic areas

Coccidioidomycosis is a systemic fungal infection endemic in Southwestern United States, Mexico, Central and South America. The causal agents are Coccidioides immitis and C. posadasii. A large number of cases of coccidioidomycosis in New York State residents were identified. We compared susceptibility profiles of these isolates and of C. immitis isolates from California using mycelial phase inoculum and CLSI (NCCLS) M38–A broth microdilution protocol. Minimum fungicidal concentrations (MFC) were also determined. Results indicated that geometric mean MICs of amphotericin B (AMB, 0.06 μg/ml), fluconazole (FLC, 8.0 μg/ml), itraconazole (ITC, 0.07 μg/ml), ketoconazole (KTC, 0.04 μg/ml), voriconazole (VRC, 0.04 μg/ml), posaconazole (PSC, 0.17 μg/ml) and caspofungin (CSP, 0.15 μg/ml) were in susceptible range as per breakpoints published for pathogenic Candida species. However, geometric MFC for FLC was relatively higher (52.4 μg/ml). Also, no significant difference in MIC and MFC values was evident for C. immitis and C. posadasii isolates. In conclusion, current methods for antifungal susceptibility testing yield reproducible profiles for Coccidioides species, which appear to be highly susceptible to most antifungal agents.     

Subculture on potato dextrose agar as a complement to the broth microdilution assay for Malassezia pachydermatis

The main aim of this study was to verify the efficacy of subculture on potato dextrose agar (PDA) as a complement to the in vitro susceptibility test for Malassezia pachydermatis strains by a broth microdilution method, as well as to determine the MIC and MFC of azole derivatives, amphotericin B and caspofungin. The microdilution assay was performed in 96-well plates using a modified RPMI 1640 medium. The M. pachydermatis strains were resistant to caspofungin. All strains (n=50) had shown MIC values of <0.03, <0.03, 2.0, 4.0 and 4.0 mug/ml for itraconazole, ketoconazole, voriconazole, fluconazole and amphotericin B, respectively. Thus, the subculture on PDA improved the analysis of the in vitro antifungal susceptibility of M. pachydermatis.     

One step forward to improve the latest method of antibacterial susceptibility testing of vitro-cultured bacteria: an implication for antibacterial efficacy of Enrofloxacine on <Emphasis Type="Italic">Aeromonas hydrophila</Emphasis>

Recently a new method of antibacterial susceptibility testing has been developed, which based on the reduction of the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) by bacteria. This study aimed to improve the latest developed method in terms of the period of time, concentration of bacterium, accuracy of assay and minimizing the toxic effect of the MTT solution. The commonly used broth microdilution method was compared in this study, as well. The minimum inhibition concentration (MIC) of the enrofloxacine against Aeromonas hydrophila as an opportunistic and ubiquitous bacterium was tested by using the improved MTT method. Using both methods showed that enrofloxacine exerts an excellent antibacterial effect against A. hidrophyla with MIC value of 62.5 ng/ml. The simplicity of the improved MTT method was shown with performing all steps of the assay in one plate, using rather low concentration of the bacterium (500 CFU/well) and shortening of the incubation time to 9 h. Moreover, 5–30 min incubation of bacteria with MTT solution excludes any toxic effect of tetrazolium salt against bacteria. Thus, our results suggest that enrofloxacine might be considered as a potent antibacterial agent against A. hydrophila induced contaminations. Moreover, MTT method with current improved characteristics such as short incubation time, low concentration of bacteria, and high sensitivity could be more practical alternative for the broth microdilution method in antibacterial susceptibility testing protocol.     

Tetrazolium salts for MIC determination in microplates: why? Which salt to select? How?

We reported evaluation of a colorimetric MIC assessment for routine susceptibility testing of non-fastidious bacteria, with addition of growth indicators (INT and MTT). Our results made us postulate that the use of such indicators was unnecessary for MIC determination in routine microdilution method.     

Survey of sensitivity of twelve yeast genera toward T-2 toxin.

A survey was made to detect the sensitivity of 12 yeast genera to T-2 toxin. Seventy-five yeasts isolated from various sources were tested for their susceptibility to T-2 toxin. The MIC of T-2 for these yeasts varied from 1.0 to greater than 8.0 micrograms/ml. Of the yeasts studied, Kluyveromyces fragilis showed the greatest sensitivity, which ranged between 0.5 and 2.5 micrograms of T-2 toxin per ml of culture medium. The roles of incubation temperature, size of the inoculum, and incubation time on the MICs were determined. The results suggest that in comparison with other yeasts, K. fragilis is very sensitive to T-2 toxin.     

Survey of sensitivity of twelve yeast genera toward T-2 toxin

A survey was made to detect the sensitivity of 12 yeast genera to T-2 toxin. Seventy-five yeasts isolated from various sources were tested for their susceptibility to T-2 toxin. The MIC of T-2 for these yeasts varied from 1.0 to greater than 8.0 micrograms/ml. Of the yeasts studied, Kluyveromyces fragilis showed the greatest sensitivity, which ranged between 0.5 and 2.5 micrograms of T-2 toxin per ml of culture medium. The roles of incubation temperature, size of the inoculum, and incubation time on the MICs were determined. The results suggest that in comparison with other yeasts, K. fragilis is very sensitive to T-2 toxin.     

Antifungal susceptibility and genotypical pattern of Microsporum canis strains

Dermatophytes are a group of fungi that are capable of invading keratinized tissues of humans and other animals. Antifungal susceptibility analysis and genetic studies by random amplification of polymorphic DNA (RAPD), have been used to detect polymorphism as well as determining the possible resistance of dermatophytes to antifungals. The aim of this study was to evaluate the possible correlation between the antifungal susceptibility and genotypical pattern of Microsporum canis strains isolated in dogs and cats with dermatophytosis in Northeast Brazil. The antifungal susceptibility study was conducted using the broth microdilution test with griseofulvine, ketoconazole, itraconazole, and fluconazole. The genotypical analysis was performed using the RAPD method. The antifungal susceptibility analysis showed that all the strains of M. canis analyzed (n = 22) were sensitive to griseofulvine (0.25 microg/mL < or minimum inhibitory concentration (MIC) < or = 1 microg/mL), ketoconazole (0.25 microg/mL < or = MIC < or = 2 microg/mL), itraconazole (0.25 microg/mL < or = MIC < or = 1 microg/mL), and fluconazole (1 microg/mL < or = MIC < or = 16 microg/mL). The RAPD results showed that all analyzed strains are genetically similar. Thus, based on antifungal susceptibility analysis and RAPD data, a possible correlation can be shown between the antifungal susceptibility and the genotypical pattern of the strains of M. canis from Northeast Brazil.     

Colorimetric broth microdilution method for the antifungal screening of plant extracts against yeasts

Screening plant extracts for antifungal activity is increasing due to demand for new antifungal agents, but the testing methods present many challenges. Standard broth microdilution methods for antifungal susceptibility testing of available antifungal agents are available now, but these methods are optimised for single compounds instead of crude plant extracts. In this study we evaluated the standard NCCLS method as well as a modification which uses spectrophotometric determination of the end-points with a plate reader. We also evaluated another standard method, the EUCAST method, which is a similar microdilution assay to the NCCLS method, but uses a larger inoculum size and a higher glucose concentration in the medium as well as spectrophotometric end-point determination. The results showed that all three methods had some drawbacks for testing plant extracts and thus we modified the NCCLS broth microdilution method by including a colorimetric indicator-resazurin for end-point determination. This modified method showed good reproducibility and clear-cut end-point, plus the end-point determination needed no instruments. It enabled us to evaluate the activity of a selection of extracts from six Combretaceous plants against three Candida spp. and thus provided pharmacological evidence for some traditional uses of these plants while assisting the identification of the active ingredients.     

Evaluation of Antifungal Susceptibility Testing with Microdilution and Etest Methods of <Emphasis Type="Italic">Candida</Emphasis> Blood Isolates

Candida species that show an increasing number of clinical and/or microbiological resistance to several antifungals and are the most common agents of invasive fungal infections. The aim of this study was to investigate the in vitro susceptibility of Candida blood isolates to antifungal agents (amphotericin B, fluconazole, itraconazole, and voriconazole) by comparative use of the CLSI reference microdilution method and Etest. Four hundred Candida blood isolates (215 Candida albicans, 185 non-albicans Candida strains) were included in the study. The broth microdilution test was performed according to the CLSI M27 A2 document. Etest was carried out according to the manufacturer’s instructions. The MIC results obtained with reference microdilution were compared with those obtained with the Etest by using percent and categorical agreements. According to MIK₉₀ values, voriconazole was the most active and itraconazole was the least active drug in vitro against all Candida species. Other than voriconazole, statistically significant differences were found when the susceptibility of Candida albicans and non-albicans Candida spp. to amphotericin B, fluconazole, and itraconazole were compared. These antifungal agents were found to be more active to C. albicans. Among the non-albicans Candida species, the lowest MIC values were obtained for Candida parapsilosis isolates. When the standard method was compared with Etest, the total agreement was higher for C. albicans than for non-albicans species, especially for fluconazole and voriconazole. In view of the findings, it was concluded that itraconazole showed the lowest activity against all Candida species. Etest could be an alternative method in assessing the in vitro antifungal susceptibility of Candida spp., but it is more convenient to use the microdilution method for studying in vitro susceptibility of non-albicans species, in particular for those possessing high MIC values against azoles.