Derivation of a restriction map of bacteriophage T3 DNA and comparison with the map of bacteriophage T7 DNA.

The DNA of bacteriophage T3 was characterized by cleavage with seven restriction endonucleases. AvaI, XbaI, BglII, and HindIII each cut T3 DNA at 1 site, KpnI cleaved it at 2 sites, MboI cleaved it at 9 sites, and HpaI cleaved it at 17 sites. The sizes of the fragments produced by digestion with these enzymes were determined by using restriction fragments of T7 DNA as molecular weight standards. As a result of this analysis, the size of T3 DNA was estimated to be 38.74 kilobases. The fragments were ordered with respect to each other and to the genetic map to produce a restriction map of T3 DNA. The location and occurrence of the restriction sites in T3 DNA are compared with those in the DNA of the closely related bacteriophage T7.     

A restriction map of Xenopus laevis mitochondrial DNA

The mitochondrial DNA from Xenopus laevis is a 17.4 x 10(3)-base-pair circular DNA molecule. The mapping of this DNA, using 19 different restriction endonucleases is reported here. The sites are as follows: 1 for BamHI, PstI, SacI, SalI, BalI; 2 for BglII, SacII, EcoRI, ClaI, 3 for XhoI, 4 for AvaI, XbaI, PvuII, 5 for HindIII, 6 for HhaI, BclI, HpaI, 10 for AvaII and 11 for HincII. The same sites (except for one of the two ClaI sites) are observed in the molecule cloned in pBR322 DNA. The fragments corresponding to 62 cleavage sites have all been ordered and precisely located. They provide suitable conditions for further investigations connected with the study of replication and nucleotide sequence determination of this molecule.     

Cloning of small DNA fragments containing the Escherichia coli tryptophan operon promoter and operator

A41-bp AluI restriction fragment from the trp promoter-operator region has been cloned into the PvuII site of pBR322, regenerating PvuII sites. Transformants were selected on media that allowed the selection of trp-operator-bearing plasmids. The cloned 41-bp fragment can be released from the vector by PvuII digestion, and it possesses a functional promoter and operator as demonstrated by in vivo tests. The 41-bp fragment contains several restriction sites: HincII, TaqI, RsaI, and a HpaI site that is located at the center of the operator sequence. Two new operator derivatives, symmetrical about the HpaI site, were prepared from the 41-bp fragment by joining two right-side, or two left-side PvuII-HpaI pieces together at the HpaI site. These derivatives showed in vivo operator activity. Plasmids containing up to five copies of the 41-bp trp-promoter-operator fragment have been constructed. These plasmids should be useful in preparing large amounts of the 41-bp fragment.     

Analysis of chromosomal integration and deletions of yeast plasmids.

Plasmid DNAs from six strains of Saccharomyces cerevisiae were compared. Three different plasmids were found, designated Scp 1, Scp 2 and Scp 3, with monomer lengths of 6.19, 6.06 and 5.97 kilobases as referenced to sequenced phiX174 DNA. DNA from each of the plasmids was inserted into a lambda vector DNA. Hybrid phage containing inserted DNA of the desired size were enriched by genetic selection and their DNAs analysed by rapid techniques. All three plasmids share the same organization, two unique sequences separated by two inverted repeats, and share basically the same DNA sequences. Scp 2 and Scp 3 differ from Scp 1 by missing a unique HpaI site and by having small overlapping deletions in the same region. The HpaI site in Scp 1 is, therefore, in a nonessential region and suitable for insertion of foreign DNA in the potential use of the yeast plasmid as a vector. Hybridization of labelled cloned plasmid DNA to restriction fragments of linear yeast DNA separated on agarose gels showed that the plasmid DNA was not stably integrated into the yeast chromosomal DNA.     

A strategy for single site PCR amplification of dsDNA: priming digested cloned or genomic DNA from an anchor-modified restriction site and a short internal sequence

Amplification of dsDNA by polymerase chain reaction (PCR) has been limited to those instances in which segments of known sequence flank the fragment to be amplified. A strategy for the PCR amplification of cloned or genomic dsDNA that necessitates sequence information from only a single short segment (single site PCR) has been devised. The region of known sequence may be located at any position within or adjacent to the segment to be amplified. The basic procedure for amplification consists of 1) digestion of dsDNA with one or more restriction enzymes, 2) ligation with a universal anchor adaptor and 3) PCR amplification using an anchor primer and the primer for the single site of known sequence. The anchor adaptor is designed in such a way as to facilitate the amplification of only those fragments containing the sequence of interest. We have demonstrated the utility of this technique by specifically amplifying and directly sequencing antibody variable region genes from cloned dsDNA and from genomic DNA.     

Cloning and cleavage site mapping of DNA from bovine herpesvirus 1 (Cooper strain).

Sequences representative of most of the bovine herpesvirus 1 (Cooper strain) DNa were cloned in the plasmid vector pBR322 at the HindIII site. EcoRI, HpaI, and BamHI restriction endonuclease sites were mapped in each of the cloned fragments, and this information was used to construct a restriction endonuclease cleavage site map of the entire viral genome for the four enzymes.     

Effective method of oligonucleotide-controlled mutagenesis of DNA fragments

A procedure has been designed for changing specific nucleotides in a DNA sequence with efficiency. The method involves the use of the specially constructed cloning vectors pBRS1, pHS1, and pHS2. These plasmids are derivatives of pBR322 in which the EcoRI-HindIII region has been replaced by synthetic duplexes carrying SmaI, HpaI and XhoI sites, in addition to EcoRI and HindIII sites. The DNA fragment to be mutagenized is cloned in pHS1 (or pBRS1, or pHS2) using restriction sites close to the SmaI and HpaI sites. The recombinant plasmid obtained is digested with one of these enzymes to produce double-stranded DNA with blunt ends. This linear DNA is a substrate for exonuclease III (or T4 DNA polymerase). The digestion under controlled conditions produces duplex with protruding single-stranded 5'-regions which include the site of the desired mutation. The synthesis of DNA by DNA-polymerase I (Klenow's fragment), primed in part by the synthetic oligonucleotide containing the desired mutation, leads to the linear heteroduplex. The closed circular heteroduplex is formed by ligation. After transformation into E. coli, DNA replication generates homoduplexes, some of which contain the mutation. Colony hybridization with the same 32P-labeled oligonucleotide is used to select mutants. The yield of the mutants is 10-20%. This technique can be extended to replicative form of M13 vectors. It can be also applied to any DNA sequence which has a unique site of restriction endonuclease generating blunt ends.     

Restriction enzyme cleavage map of Tn10, a transposon which encodes tetracycline resistance.

A cleavage map of a recombinant plasmid carrying Tn10 was constructed for 13 different restriction enzymes. The Tn10 region of this plasmid contains cleavage sites for BamHI, AvaI, BglI, BglII, EcoRI, XbaI, HincII, HindIII, and HpaI. Restriction enzymes PstI, SmaI, KpnI, XhoI, SalI, and PvuI do not cleave within the Tn10 element. This map confirms the previously reported structure of this transposon; it is composed of a unique sequence (approximately6,400 base pairs long), which in part codes for the tetracycline resistance functions and is bounded by inverted repeats (approximately 1,450 base pairs long).     

Physical maps of bovine papillomavirus type 1 and type 2 genomes.

Physical maps of bovine papillomavirus type 1 and type 2 (BPV-1 and BPV-2) DNA were constructed from analysis of the electrophoretic mobilities of restriction endonuclease cleavage fragments from dual digests. BPV-1 DNA was sensitive to Hind III, HindIII, EcoRI, HpaI, AND BamHI, with all but HindII yielding single scissions. BPV-2 DNA was resistant to EcoRI, and HindIII had one cleavage site whereas HpaI, BamHI, and HindII yielded multiple fragments. Of four BPV-1 isolates examined, DNA from one isolate was resistant to HindIII, and another DNA isolate was resistant to BamHI. The three BPV-2 isolates examined were uniformly sensitive to the restriction endonucleases employed.     

Comparison between the Polish population and European populations on the basis of mitochondrial morphs and haplogroups

Polymorphisms in mitochondrial DNA (mtDNA) were analyzed in 152 samples from the Polish population using restriction enzymes AvaI, BamHI, HaeII, HpaI and PstI. Additionally, each sample was classified into the appropriate haplogroup. When required, appropriate fragments were sequenced to establish the exact polymorphic sites. We found one new morph for PstI and six new morphs for AvaII. Some detected morphs have previously been described as population specific morphs in different regions of the world. All polymorphisms were classified into 31 different haplotypes. 21 of them were detected in single individuals. The Polish population was compared with other populations from different regions. Moreover, we have obtained evidence for mutation hot spots in the mtDNA coding region. Our results indicate that AvaII morph and haplogroup composition of the Polish population is similar to other European populations and has a distribution typical for this part of the world. However, statistically significant differences in haplogroup composition were found between the Polish population and Italian and Finnish populations.     

Cloning and restriction map of the first part of the histidine operon of Salmonella typhimurium.

The first part of the histidine operon of Salmonella typhimurium, hisGpeaGD, has been cloned onto the vector plasmid mini-ColE1 (pVH51). The resulting plasmid, pWB91, has a single EcoRI site and is 11,500 base pairs in size. The HindII restriction map was determined by the method of two-dimensional cross-annealing between a partial digest pattern and a complete digest pattern. The restriction fragment containing the genetic control region was identified with the aid of the small (35-base pair) internal deletion 01242 and the observation that heteroduplexed restriction fragments containing this deletion have markedly reduced mobility on polyacrylamide gels. The genetic control region was then mapped in more detail with other restriction enzymes. The genetic orientation of the restriction map was determined with the aid of several deletions of integral HindII fragments generated in vitro.     

Genomic restriction map of the extremely thermophilic bacterium Thermus thermophilus HB8.

A physical map of the chromosome of the extremely thermophilic eubacterium Thermus thermophilus HB8 has been constructed by using pulsed-field gel electrophoresis techniques. A total of 26 cleavage sites for the rarely cutting restriction endonucleases HpaI, MunI, and NdeI were located on the genome. On the basis of the sizes of the restriction fragments generated, the genome size was estimated to be 1.74 Mbp, which is significantly smaller than the chromosomes of Escherichia coli and other mesophiles. Partial digestion experiments revealed the order of the six HpaI bands on the chromosome. Hybridization of isolated restriction fragments to pulsed-field gel-separated restriction digestions confirmed the deduced order of the HpaI fragments and allowed ordering and alignment of the NdeI and MunI fragments. In addition, 16 genes or gene clusters cloned from several different Thermus strains were located on the T. thermophilus HB8 chromosomal map by hybridization of gene probes to pulsed-field gel-resolved restriction digestions.     

HindII, HindIII, and HpaI restriction fragment maps of bacteriophage lambda DNA

The site-specific restriction endonucleases isolated from Hemophilus influenzae strains Rc (HincII) and Rd (HindII + III), and Hemophilus parainfluenzae (HpaI) were used to digest bacteriophage lambda DNA into 34, 40, and 15 specific fragments, respectively. The sites cleaved by each of these enzymes were localized on the lambda physical map and the fragments resulting from these cleavages were electrophoretically identified on gels by (1) analysis of the digestion profiles of deletion and transducing derivatives of lambda; and (2) digesting individual fragments produced by one restriction endonuclease with another restriction endonuclease. This paper presents the HindII, HindIII, and HpaI restriction fragment maps for the entire lambda genome, and the data used to derive these maps for the region of the lambda genome between the attachment site (at 57.3% lambda) and the right vegetative end (100% lambda). The data for mapping the left arm of lambda may be found in the accompanying paper (Robinson and Landy, 1977).     

Genes 55, alpha gt, 47 and 46 of bacteriophage T4: the genomic organization as deduced by sequence analysis

The nucleotide sequence of T4 genes 55, alpha gt, 47 and 46 was determined by a combination of 'classical' procedures and a shotgun approach. Small DNA fragments generated by frequent cleavage with restriction enzymes or by sonication of restriction fragments were cloned in phage M13 vectors and sequenced by the dideoxy method. The positions of the genes were determined by marker rescue between the corresponding T4 amber mutants and the cloned T4 DNA fragments used in the sequencing experiments. The sequence gives an insight into the organization of this 7.1-kb early region of the T4 genome and shows that genetically 'silent' portions within this region are not void of genetic information.     

Structure of the heterogeneous L-S junction region of human cytomegalovirus strain AD169 DNA

The genome of human cytomegalovirus strain AD169 contains a region of heterogeneity located at the junction between the long (L) and short (S) components of the viral DNA. Twelve cloned L-S junction fragments were studied by using the restriction enzymes HaeII and XhoI. The region of heterogeneity was localized within a single HaeII restriction fragment. The enzyme XhoI was used to subdivide this region and revealed the presence of three types of heterogeneity within the junction fragments. Each of the cloned junction fragments contained one of the following fragments: 0.553, 0.95, or 1.35 kilobase pairs (referred to as class I heterogeneity). Class II heterogeneity was defined as the presence of tandem duplications of class I fragments. In addition, a variable number (0 to 5) of a 0.2-kbp fragment (class III heterogeneity) was observed. Mapping of these fragments with partial XhoI digestions revealed that the class I and class III heterogeneous fragments were adjacent. The DNA sequence of the smallest cloned L-S junction fragment was determined and analyzed. This junction fragment contained a single 0.553-kbp XhoI fragment and no copies of the 0.2-kbp fragment. The 0.553-kbp XhoI fragment was similar in structure to the a-sequences of herpes simplex virus types 1 and 2. In addition, a region of homology was found between the a sequences of herpes simplex virus types 1 and 2 and the 0.553-kbp XhoI fragment from the human cytomegalovirus junction.     

A protocol for the construction of microsatellite enriched genomic library

An improved protocol for constructing microsatellite-enriched libraries was developed. The procedure depends on digesting genomic DNA with a restriction enzyme that generates blunt-ends, and on ligating linkers that, when dimerized, create a restriction site for a different blunt-end producing restriction enzyme. Efficient ligation of linkers to the genomic DNA fragments is achieved by including restriction enzymes in the ligation reaction that eliminate unwanted ligation products. After ligation, the reaction mixture is subjected to subtractive hybridization without purification. DNA fragments containing microsatellites are captured by biotin-labeled oligonucleotide repeats and recovered using streptavidin-coated beads. The recovered fragments are amplified by PCR using the linker sequence as primer, and cloned directly into a plasmid vector. The linker has the sequence GTTT on the 5′ end, which promotes efficient adenylation of the 3′ ends of the PCR products. Consequently, the amplified fragments could be cloned into vectors without purification. This procedure enables efficient enrichment and cloning of microsatellite sequences, resulting in a library with a low level of redundancy.