Complete nucleotide sequence of insertion element IS4351 from Bacteroides fragilis.

The nucleotide sequence and genetic analyses of one of the directly repeated sequences flanking the macrolide-lincosamide-streptogramin B drug resistance determinant, ermF, from the Bacteroides fragilis R plasmid, pBF4, suggested that this region is an insertion sequence (IS) element. This 1,155-base-pair element contained partially matched (20 of 25 base pairs) terminal-inverted repeats, overlapping, anti-parallel open reading frames, and nine promoterlike sequences, including three that were oriented outward. Analysis of this sequence revealed no significant nucleotide homology to 13 other known IS elements. Inasmuch as Southern blot hybridization analysis detected homologous sequences in chromosomal DNA and its G+C content (42 mol%) was similar to that of B. fragilis, the data suggested that this element is of Bacteroides origin. Transposition promoted by this element was demonstrated in recA E. coli. Recombinants were recovered by selecting for the activation of a promoterless chloramphenicol resistance gene on the plasmid pDH5110 and were characterized by restriction endonuclease mapping and Southern blot hybridization. We propose that this IS element be designated IS4351.     

Characterization of the 13-kilobase ermF region of the Bacteroides conjugative transposon CTnDOT

The conjugative transposon CTnDOT is virtually identical over most of its length to another conjugative transposon, CTnERL, except that CTnDOT carries an ermF gene that is not found on CTnERL. In this report, we show that the region containing ermF appears to consist of a 13-kb chimera composed of at least one class I composite transposon and a mobilizable transposon (MTn). Although the ermF region contains genes also carried on Bacteroides transposons Tn4351 and Tn4551, it does not contain the IS4351 element which is found on these transposons. In CTnDOT, insertion of the ermF region occurred near a stem-loop structure at the end of orf2, an open reading frame located immediately downstream of the integrase (int) gene of CTnDOT, and in a region known to be important for excision of CTnERL and CTnDOT. The chimera that comprises the ermF region can apparently no longer excise and circularize, but it contains a functional mobilization region related to that described for the Bacteroides MTn Tn4399. Analysis of 19 independent Bacteroides isolates showed that the ermF region is located in the same position in all of the strains analyzed and that the compositions of the ermF region are almost identical in these strains. Therefore, it appears that CTnDOT-like elements present in community and clinical isolates of Bacteroides were derived from a common ancestor and proliferated in the diverse Bacteroides population.     

Heterologous gene expression in Bacteroides fragilis.

Bacteroides fragilis and other gastrointestinal tract Bacteroides are unusual gram-negative eubacteria in that genes from other gram-negative eubacteria are not expressed when introduced into these organisms. To analyze gene expression in Bacteroides, expression vector and promoter probe (detection) vector systems were developed. The essential feature of the expression vector was the incorporation of a Bacteroides insertion sequence element, IS4351, which possesses promoter activity directed outward from its ends. Genes inserted into the multiple cloning site downstream from an IS4351 DNA fragment were readily expressed in B. fragilis. The chloramphenicol acetyltransferase (cat) structural gene from Tn9 was tested and conferred chloramphenicol resistance on B. fragilis. Both chloramphenicol resistance and CAT activity were shown to be dependent on the IS4351 promoters. Similar results were obtained with the Escherichia coli beta-glucuronidase gene (uidA) but activity was just 30% of the levels seen with cat. Two tetracycline resistance determinants, tetM from Streptococcus agalactiae and tetC from E. coli, also were examined. tetC did not result in detectable tetracycline resistance but the gram-positive tetM gene conferred high-level resistance to tetracycline and minocycline in Bacteroides hosts. Based on the cat results, promoter probe vectors containing the promoterless cat gene were constructed. These vectors were used to clone random B. fragilis promoters from partial genomic libraries and the recombinants displayed a range of CAT activities and chloramphenicol MICs in B. fragilis hosts. In addition, known E. coli promoters (Ptet, Ptac, Ptrc, Psyn, and P1P2rrnB) were tested for activity in B. fragilis. No chloramphenicol resistance or CAT activity was observed in B. fragilis with these promoters.     

Direct repeats flanking the Bacteroides transposon Tn4351 are insertion sequence elements.

The clindamycin-erythromycin resistance (Ccr Emr) region of the Bacteroides transposon Tn4351 is flanked by direct repeats. This study showed that the direct repeats are insertion sequence (IS) elements. Although both IS elements can mediate transfer of the chloramphenicol (Cmr) marker on pBR328 by cointegrate formation with the conjugal IncW plasmid R388, IS4351R-mediated transfer of Cmr occurred at a consistently lower frequency than did the transfer mediated by IS4351L. Analysis of plasmids from the resultant transconjugants revealed IS-mediated activities such as deletions, tandem duplication of IS4351L, and excision of IS4351R.     

Evidence that a novel tetracycline resistance gene found on two Bacteroides transposons encodes an NADP-requiring oxidoreductase.

Two transposons, Tn4351 and Tn4400, which were originally isolated from the obligate anaerobe Bacteroides fragilis, carry a tetracycline resistance (Tcr) gene that confers resistance only on aerobically grown Escherichia coli. This aerobic Tcr gene, designated tetX, has been shown previously to act by chemically modifying tetracycline in a reaction that appears to require oxygen. We have now obtained the DNA sequence of tetX and 0.6 kb of its upstream region from Tn4400. Analysis of the DNA sequence of tetX revealed that this gene encoded a 43.7-kDa protein. The deduced amino acid sequence of the amino terminus of the protein had homology with a number of enzymes, all of which had in common a requirement for NAD(P). In an earlier study, we had observed that disrupted cells, unlike intact cells, could not carry out the alteration of tetracycline. We have now shown that if NADPH (1 mM) is added to the disrupted cell preparation, alteration of tetracycline occurs. Thus, TetX appears to be an NADP-requiring oxidoreductase. Tn4400 conferred a fivefold-lower level of tetracycline resistance than Tn4351. This finding appears to be due to a lower level of expression of the tetX on Tn4400, because the activity of a tetX-lacZ fusion from Tn4400 was 10-fold lower than that of the same fusion from Tn4351. A comparison of the sequence of the tetX region on Tn4351 with that on Tn4400 showed that the only difference between the upstream regions of the two transposons was a 4-base change 350 bp upstream of the start of the tetX coding region. The 4-base change difference creates a good consensus -35 region on Tn4351 that is not present on Tn4400 and could be creating an extra promoter.     

Facilitated transfer of IncP beta R751 derivatives from the chromosome of Bacteroides uniformis to Escherichia coli recipients by a conjugative Bacteroides tetracycline resistance element.

The broad-host-range IncP beta plasmid R751 can mobilize itself from Escherichia coli to Bacteroides spp, but it is not maintained in Bacteroides spp. If R751 carries the Bacteroides transposon Tn4351, it can be integrated into the Bacteroides chromosome. Previously we showed that R751, integrated in the chromosome of Bacteroides uniformis, cannot mobilize itself out of B. uniformis into E. coli or isogenic B. uniformis strains. In this report, we showed that if the Bacteroides conjugative tetracycline resistance element Tcr ERL was coresident with the R751 insertion in B. uniformis, derivatives of R751 were transferred to E. coli, where they were recovered as plasmids. The most common derivatives were R751::Tn4351 and R751::IS4351, but some strains transferred R751 derivatives, containing additional DNA segments ranging in size from 10 to 23 kilobases. These DNA inserts cross-hybridized with chromosomal DNA from B. uniformis which did not carry the Tcr ERL element. Therefore, the inserts appeared to be segments of the wild-type B. uniformis chromosome and were not associated with the Tcr ERL element. The transfer of integrated R751 from B. uniformis was independent of the RecA phenotype of the E. coli recipients and did not appear to be due to transfer of B. uniformis chromosomal DNA, followed by RecA-dependent recombination between homologous IS4351 sequences to form the resultant R751 plasmid derivatives. Consistent with this, no transfer of Tn4351 (associated with the cointegrated R751) from B. uniformis donors to isogenic B. uniformis recipients was detected (< 10(-8)). Our data support the hypothesis that R751 excises from the B. uniformis chromosome by recombination involving flanking Tn4351 or IS4351 sequences and forms nonreplicating circles. The mobilization of these circular forms out of B. uniformis to E.coli is then facilitated by the Tcr ERL element.     

IS257 from Staphylococcus aureus: member of an insertion sequence superfamily prevalent among gram-positive and gram-negative bacteria

The nucleotide sequences for the IS257 family of insertion sequences from Staphylococcus aureus were compared with those of the ISS1 family from Streptococcus lactis and the IS15 family which is widespread amongst Gram-negative bacteria. These elements have a striking degree of similarity in both their putative transposase polypeptide sequences and their nucleotide sequences (40 to 64% between pairs), including 12 out of 14 bp conservation in their terminal inverted repeats. The evolutionary distance between the IS15 family and the IS257 and ISS1 families of Gram-positive origin is approximately twice that between the IS257 and ISS1 families. Analysis of base substitutions in the three sequences has provided insights into the effect of selection for the G + C content of immigrant genes to conform to that of their hosts, and into the evolution of biases in overall amino acid composition of cellular proteins in prokaryotes and eukaryotes. The IS257, ISS1, IS15 families form a superfamily of insertion sequences that has been involved in the spread of a number of antimicrobial resistance determinants in Gram-positive and Gram-negative pathogens.     

Characterization of IS476 and its role in bacterial spot disease of tomato and pepper.

IS476 is an endogenous insertion sequence present in copper-tolerant strains of Xanthomonas campestris pv. vesicatoria. Sequence analysis has revealed that the element is 1,225 base pairs in length, has 26-base-pair inverted repeats, and causes a 4-base-pair target site duplication upon insertion into the avirulence gene avrBs1. Comparison of the full-length sequence with sequences in the National Biomedical Research Foundation and National Institutes of Health data bases showed that one of the predicted IS476 proteins is partially homologous to the putative transposase of IS3 from Escherichia coli, and the inverted repeats of IS476 have significant homology to the inverted repeats of the IS51 insertion sequence of Pseudomonas syringae pv. savastanoi. A transposition assay based on the insertional inactivation of the sacRB locus of Bacillus subtilis was used to demonstrate that one of the three copies of IS476 residing on the 200-kilobase copper plasmid pXVCU1 is capable of transposition in several strains of Xanthomonas campestris. The position of IS476 insertion in several avrBs1 mutants was established and was shown to influence both induction of hypersensitivity and bacterial growth in planta.     

IS1 insertion generates duplication of a nine base pair sequence at its target site.

Three independent integrations of the E. coli insertion sequence, IS1, into the gal operon have been analyzed. DNA sequences of portions of the wild-type galT gene which act as the target sites for these insertions, as well as the corresponding gal/IS1 junctions, are reported. Two features are particularly noteworthy. First, similar sequences appearing in inverted orientation consitute the ends of IS1: 18 of the terminal 23 base pairs at each end are identical. Second, in all three insertions, a 9 base pair segment found once in the wild-type sequence at the site of insertion is duplicated and appears in the same orientation at each end of the inserted element. The sequence of this 9 base pair repeat is different for each insertion analyzed. No homology between the inverted repeat sequences at the ends of IS1 and the sequences of the target sites is observed. Models for the mechanism of IS1 insertion are proposed.     

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus.

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.     

Development of techniques for the genetic manipulation of the gliding bacterium Cytophaga johnsonae.

Cytophaga johnsonae displays many features that make it an excellent model of bacterial gliding motility. Unfortunately, genetic analyses of C. johnsonae, or any related gliding bacteria, were not possible because of a complete lack of selectable markers, cloning vectors, transposons, and convenient methods of gene transfer. As a first step toward a molecular analysis of gliding motility of C. johnsonae, we developed these genetic techniques and tools. Common broad-host-range plasmids and transposons did not function in C. johnsonae. We identified one Bacteroides transposon, Tn4351, that could be introduced into C. johnsonae on plasmid R751 by conjugation from Escherichia coli. Tn4351 inserted in the C. johnsonae genome and conferred erythromycin resistance. Tn-4351 insertions resulted in auxotrophic mutations and motility mutations. We constructed novel plasmids and cosmids for genetic analyses of C. johnsonae. These cloning vectors are derived from a small cryptic plasmid (pCP1) that we identified in the fish pathogen Cytophaga psychrophila D12. These plasmids contain the ermF (erythromycin resistance) gene from Tn4351 and a variety of features that facilitate propagation and selection in E. coli and conjugative transfer from E. coli to C. johnsonae.     

Repeated sequences including RS 1100 from Pseudomonas cepacia AC1100 function as IS elements

Summary Several lines of evidence were obtained that the previously identified, repeated sequence RS 1100 of Pseudomonas cepacia strain AC1100 undergoes transposition events. DNA sequences flanking the chlorohydroxy hydroquinone (CHQ) degradative genes of this organism were examined from sources, including several independently isolated cosmid clones from an AC1100 genomic library and genomic DNAs of two independently maintained wild-type AC1100 isolates. Hybridization and restriction endonuclease mapping studies revealed these sequences to be similar except for their numbers and distributions of RS1100 copies. A recombinant plasmid containing the immediate chq gene region and excluding any copies of RS1100 was conjugated into AC1100 mutant RHA5 which was shown to have undergone a deletion of its corresponding DNA. Hybridization and restriction mapping analyses of several reisolated plasmids revealed the presence of RS1100 sequences at different positions within either the vector or insert portions. One such plasmid contained tandem copies of RS1100 with an intervening DNA sequence also of AC1100 origin. Similar experiments involving introduction of the promoter probe plasmid pKT240 into wild-type AC1100 cells resulted in the acquisition of high-concentration streptomycin resistance by a number of recipients. The reisolated plasmids in most cases also conferred streptomycin resistance to Escherichia coli transformants and in each case were found to contain insertions close to the upstream portion of the aphC structural gene. These insertions alternatively contained RS1100 sequences or a newly identified 3400 by repeated sequence from AC1100. Based on these results, RS1100 has been redesignated as insertion sequence IS931 and the 3400 bp repeated sequence has been designated as IS932.[/ab]Abbreviations aphc aminoglycoside phosphotransferase gene - BSM basal salts medium - chq chlorohydroxy hydroquinone degradative gene(s) - dCTP deoxycytidine triphosphate - IS insertion sequence - Tft 2,4,5-T degradative phenotype     

Identification of a second endogenous Porphyromonas gingivalis insertion element.

In this study a second endogenous Porphyromonas gingivalis insertion element (IS element) that is capable of transposition within P. gingivalis was identified. Nucleotide sequence analysis of the Tn4351 insertion site in a P. gingivalis Tn4351-generated transconjugant showed that a complete copy of the previously unidentified IS element, designated PGIS2, had inserted into IS4351R in Tn4351. PGIS2 is 1,207 bp in length with 19-bp imperfect terminal inverted repeats, and insertion resulted in a duplicated 10-bp target sequence. Results of Southern hybridization of chromosomal DNA isolated from several P. gingivalis strains with a PGIS2-specific probe demonstrated that the number of copies of PGIS2 per genome varies among different P. gingivalis strains. Computer analysis of the putative polypeptide encoded by PGIS2 revealed strong homologies to the products encoded by IS1358 from Vibrio cholerae, ISAS1 from Aeromonas salmonicida, and H-rpt in Escherichia coli K-12.     

Characterisation of IS901 integration sites in the Mycobacterium avium genome

Data are presented on the identification and characterisation of 17 chromosomal integration loci of the insertion element IS901 in the Mycobacterium avium (cervine strain JD88/118) genome. Thirteen of these integration loci have been mapped to their corresponding positions on the M. avium strain 104 (an IS901(-) strain) genome (The Institute for Genome Research (TIGR) unfinished genome-sequencing project). Sequence data for both upstream and downstream sequence flanking regions were obtained for 12 insertion loci, while upstream sequence was obtained for five others. A consensus IS901 insertion target sequence compiled from all 17 integration sites was in broad agreement with earlier reports that were based on only two such loci. Analysis of IS901 integration site flanking sequences revealed that, like IS900 in M. avium subspecies paratuberculosis, IS901 inserts preferentially between a putative ribosome-binding sequence (RBS) and the translational start codon of an open reading frame (ORF). In BLAST X and BLAST P searches of the GenBank database, these ORFs were shown to share significant homologies with a number of other prokaryotic genes.     

Identification and sequence of a tet(M) tetracycline resistance determinant homologue in clinical isolates of Escherichia coli

The presence of the tetracycline resistance determinant tet(M) in human clinical isolates of Escherichia coli is described for the first time in this report. The homologue was >99% identical to the tet(M) genes reported to occur in Lactobacillus plantarum, Neisseria meningitidis, and Streptococcus agalactiae, and 3% of the residues in its deduced amino acid sequence diverge from tet(M) of Staphylococcus aureus. Sequence analysis of the regions immediately flanking the gene revealed that sequences upstream of tet(M) in E. coli have homology to Tn916; however, a complete IS26 insertion element was present immediately upstream of the promoter element. Downstream from the termination codon is an insertion sequence that was homologous to the ISVs1 element reported to occur in a plasmid from Vibrio salmonicida that has been associated with another tetracycline resistance determinant, tet(E). Results of mating experiments demonstrated that the E. coli tet(M) gene was on a mobile element so that resistance to tetracycline and minocycline could be transferred to a susceptible strain by conjugation. Expression of the cloned tet(M) gene, under the control of its own promoter, provided tetracycline and minocycline resistance to the E. coli host.