Interaction of oligonucleotides with cationic lipids: the relationship between electrostatics, hydration and state of aggregation

Lipoplexes, which are spontaneously formed complexes between oligonucleotide (ODN) and cationic lipid, can be used to deliver ODNs into cells, both in vitro and in vivo. The present study was aimed at characterizing the interactions associated with the formation of lipoplexes, specifically in terms of electrostatics, hydration and particle size. Large unilamellar vesicles (approximately 100 nm diameter), composed of either DOTAP, DOTAP/cholesterol (mole ratio 1:1) or DOTAP/DOPE (mole ratio 1:1) were employed as a model of cationic liposomes. Neutral vesicles ( approximately 100 nm diameter), composed of DOPC/DOPE (mole ratio 1:1), were employed as control liposomes. After ODN addition to vesicles, at different mole ratios, changes in pH and electrical surface potential at the lipid-water interface were analyzed by using the fluorophore heptadecyl-7-hydroxycoumarin. In separate 'mirror image' experiments, liposomes were added at different mole ratios to fluorescein isothiocyanate-labeled ODNs, thus yielding data about changes in the pH near the ODN molecules induced by the complexation with the cationic lipid. Particle size distribution and turbidity fluctuations were analyzed by the use of photon correlation spectroscopy and static light-scattering, respectively. In additional fluorescent probe studies, TMADPH was used to quantify membrane defects while laurdan was used to measure the level of hydration at the water-lipid interface. The results indicate that mutual neutralization of cationic lipids by ODNs and vice versa is a spontaneous reaction and that this neutralization is the main driving force for lipoplex generation. When lipid neutralization is partial, induced membrane defects cause the lipoplexes to exhibit increased size instability.     

Interactions of chicken liver basic fatty acid-binding protein with lipid membranes

The interactions of chicken liver basic fatty acid-binding protein (Lb-FABP) with large unilamellar vesicles (LUVs) of palmitoyloleoyl phosphatidylcholine (POPC) and palmitoyloleoyl phosphatidylglycerol (POPG) were studied by binding assays, Fourier transform infrared (FT-IR) spectroscopy, monolayers at air-water interface, and low-angle X-ray diffraction. Lb-FABP binds to POPG LUVs at low ionic strength but not at 0.1 M NaCl. The infrared (IR) spectra of the POPG membrane-bound protein showed a decrease of the band corresponding to beta-structures as compared to the protein in solution. In addition, a cooperative decrease of the beta-edge band above 70 degrees C in solution was also evident, while the transition was less cooperative and took place at lower temperature for the POPG membrane-bound protein. Low- and wide-angle X-ray diffraction experiments with lipid multilayers indicate that binding of the protein produces a rearrangement of the membrane structure, increasing the interlamellar spacing and decreasing the compactness of the lipids.     

Efficient encapsulation of antisense oligonucleotides in lipid vesicles using ionizable aminolipids: formation of novel small multilamellar vesicle structures

Typical methods used for encapsulating antisense oligodeoxynucleotides (ODN) and plasmid DNA in lipid vesicles result in very low encapsulation efficiencies or employ cationic lipids that exhibit unfavorable pharmacokinetic and toxicity characteristics when administered intravenously. In this study, we describe and characterize a novel formulation process that utilizes an ionizable aminolipid (1,2-dioleoyl-3-dimethylammonium propane, DODAP) and an ethanol-containing buffer system for encapsulating large quantities (0.15--0.25 g ODN/g lipid) of polyanionic ODN in lipid vesicles. This process requires the presence of up to 40% ethanol (v/v) and initial formulation at acidic pH values where the DODAP is positively charged. In addition, the presence of a poly(ethylene glycol)-lipid was required during the formulation process to prevent aggregation. The 'stabilized antisense-lipid particles' (SALP) formed are stable on adjustment of the external pH to neutral pH values and the formulation process allows encapsulation efficiencies of up to 70%. ODN encapsulation was confirmed by nuclease protection assays and (31)P NMR measurements. Cryo-electron microscopy indicated that the final particles consisted of a mixed population of unilamellar and small multilamellar vesicles (80--140 nm diameter), the relative proportion of which was dependent on the initial ODN to lipid ratio. Finally, SALP exhibited significantly enhanced circulation lifetimes in mice relative to free antisense ODN, cationic lipid/ODN complexes and SALP prepared with quaternary aminolipids. Given the small particle sizes and improved encapsulation efficiency, ODN to lipid ratios, and circulation times of this formulation compared to others, we believe SALP represent a viable candidate for systemic applications involving nucleic acid therapeutics.     

Pathways of lipid vesicle deposition on solid surfaces: a combined QCM-D and AFM study

Supported lipid bilayers (SLBs) are popular models of cell membranes with potential biotechnological applications, yet the mechanism of SLB formation is only partially understood. In this study, the adsorption and subsequent conformational changes of sonicated unilamellar vesicles on silica supports were investigated by quartz crystal microbalance with dissipation monitoring and atomic force microscopy, using mixtures of zwitterionic, negatively charged, and positively charged lipids, both in the presence and in the absence of Ca(2+) ions. Four different pathways of vesicle deposition could be distinguished. Depending on their charge, vesicles i). did not adsorb; ii). formed a stable vesicular layer; or iii). decomposed into an SLB after adsorption at high critical coverage or iv). at low coverage. Calcium was shown to enhance the tendency of SLB formation for negatively charged and zwitterionic vesicles. The role of vesicle-support, interbilayer, and intrabilayer interactions in the formation of SLBs is discussed.     

Structural studies of polymer-cushioned lipid bilayers.

The structure of softly supported polymer-cushioned lipid bilayers, prepared in two different ways at the quartz-solution interface, were determined using neutron reflectometry. The polymer cushion consisted of a thin layer of branched, cationic polyethyleneimine (PEI), and the bilayers were formed by adsorption of small unilamellar dimyristoylphosphatidylcholine (DMPC) vesicles. When vesicles were first allowed to adsorb to a bare quartz substrate, an almost perfect bilayer formed. When the polymer was then added to the aqueous solution, it appeared to diffuse beneath this bilayer, effectively lifting it from the substrate. In contrast, if the polymer layer is adsorbed first to the bare quartz substrate followed by addition of vesicles to the solution, there is very little interaction of the vesicles with the polymer layer, and the result is a complex structure most likely consisting of patchy multilayers or adsorbed vesicles.     

Fluorescence light microscopy of pulmonary surfactant at the air-water interface of an air bubble of adjustable size

The structural dynamics of pulmonary surfactant was studied by epifluorescence light microscopy at the air-water interface of a bubble as a model close to nature for an alveolus. Small unilamellar vesicles of dipalmitoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, a small amount of a fluorescent dipalmitoylphosphatidylcholine-analog, and surfactant-associated protein C were injected into the buffer solution. They aggregated to large clusters in the presence of Ca(2+) and adsorbed from these units to the interface. This gave rise to an interfacial film that eventually became fully condensed with dark, polygonal domains in a fluorescent matrix. When now the bubble size was increased or decreased, respectively, the film expanded or contracted. Upon expansion of the bubble, the dark areas became larger to the debit of the bright matrix and reversed upon contraction. We were able to observe single domains during the whole process. The film remained condensed, even when the interface was increased to twice its original size. From comparison with scanning force microscopy directly at the air-water interface, the fluorescent areas proved to be lipid bilayers associated with the (dark) monolayer. In the lung, such multilayer phase acts as a reservoir that guarantees a full molecular coverage of the alveolar interface during the breathing cycle and provides mechanical stability to the film.     

Characterization of interaction between cationic lipid-oligonucleotide complexes and cellular membrane lipids using confocal imaging and fluorescence correlation spectroscopy

Complexes formed by cationic liposomes and single-strand oligodeoxynucleotides (CL-ODN) are promising delivery systems for antisense therapy. ODN release from the complexes is an essential step for inhibiting activity of antisense drugs. We applied fluorescence correlation spectroscopy and confocal laser scanning microscopy to monitor CL-ODN complex interaction with membrane lipids leading to ODN release. To model cellular membranes we used giant unilamellar vesicles and investigated the transport of Cy-5-labeled ODNs across DiO-labeled membranes. For the first time, we directly observed that ODN molecules are transferred across the lipid bilayers and are kept inside the giant unilamellar vesicles after release from the carriers. ODN dissociation from the carrier was assessed by comparing diffusion constants of CL-ODN complexes and ODNs before complexation and after release. Freely diffusing Cy-5-labeled ODN (16-nt) has diffusion constant D(ODN) = 1.3 +/- 0.1 x 10(-6) cm2/s. Fluorescence correlation spectroscopy curves for CL-ODN complexes were fitted with two components, which both have significantly slower diffusion in the range of D(CL-ODN) = approximately 1.5 x 10(-8) cm2/s. Released ODN has the mean diffusion constant D = 1.1 +/- 0.2 x 10(-6) cm2/s, which signifies that ODN is dissociated from cationic lipids. In contrast to earlier studies, we report that phosphatidylethanolamine can trigger ODN release from the carrier in the full absence of anionic phosphatidylserine in the target membrane and that phosphatidylethanolamine-mediated release is as extensive as in the case of phosphatidylserine. The presented methodology provides an effective tool for probing a delivery potential of newly created lipid formulations of CL-ODN complexes for optimal design of carriers.     

Effective detergent/lipid ratios in the solubilization of phosphatidylcholine vesicles by Triton X-100.

Effective detergent:lipid ratios (i.e. molar ratios in the mixed aggregates, vesicles or micelles) have been estimated for the solubilization of phosphatidylcholine vesicles by Triton X-100. Effective molar ratios are given for both the onset and the completion of bilayer solubilization; small unilamellar, large unilamellar and multilamellar vesicles have been used. Effective detergent:lipid ratios are independent of phospholipid concentration, and their use allows a deeper understanding of membrane-surfactant interactions.     

Phase and surface properties of lipid bilayers containing neoglycolipids

The physical properties conferred to DPPC bilayers by including neoglycolipids composed by two different trisaccharides: mannose-mannose-mannose (3M) and glucose-mannose-glucose (GMG) attached to a cholesterol (cho) and a distearylglycerol (diC18) lipid moiety by a spacer were evaluated by means of the measurement of the electrokinetic potential and interfacial fluorescent probes. The phase properties measured with diphenylhexatriene (DPH) were correlated with the surface properties measured with merocyanine 540, dansyl, and Laurdan probes. The results show that the surface properties of large unilamellar vesicles depend on the sugar exposure to the water phase and also on the hydrocarbon moiety by which it is anchored to the bilayer. The combination of the cholesterol moiety with the saccharide attenuates the cooperativity decrease induced by the cholesterol moiety without the sugar portion. The neoglycolipid GMG-diC18 promotes opposite effects affecting slightly the cooperativity at the hydrocarbon core of DPPC and displacing the phase transition temperature to higher values. The presence of neoglycolipid with diC18 introduces defects in the packing at the interface of the membrane in the gel state. It is concluded that a relatively low proportion of neoglycolipids affects significantly the interfacial properties of DPPC bilayers in large unilamellar vesicles in the absence of changes at the membrane bulk at 25 degrees C.     

Conformation and interaction of the cyclic cationic antimicrobial peptides in lipid bilayers.

To investigate the role of peptide-membrane interactions in the biological activity of cyclic cationic peptides, the conformations and interactions of four membrane-active antimicrobial peptides [based on Gramicidin S (GS)] were examined in neutral and negatively charged micelles and phospholipid vesicles, using CD and fluorescence spectroscopy and ultracentrifugation techniques. Moreover, the effects of these peptides on the release of entrapped fluorescent dye from unilamellar vesicles of phosphatidylcholine (PC) and phosphatidylethanolamine/phosphatidylglycerol (PE/PG) were studied. The cyclic peptides include GS10 [Cyclo(VKLdYP)2], GS12 [Cyclo(VKLKdYPKVKLdYP)], GS14 [Cyclo(VKLKVdYPLKVKLdYP)] and [d-Lys]4GS14 [Cyclo(VKLdKVdYPLKVKLdYP)] (underlined residues are d-amino acids), were different in their ring size, structure and amphipathicity, and covered a broad spectrum of hemolytic and antimicrobial activities. Interaction of the peptides with the zwitterionic PC and negatively charged PE/PG vesicles were distinct from each other. The hydrophobic interaction seems to be the dominant factor in the hemolytic activity of the peptides, as well as their interaction with the PC vesicles. A combination of electrostatic and hydrophobic interactions of the peptides induces aggregation and fusion in PE/PG vesicles with different propensities in the order: [d-Lys]4GS14 > GS14 > GS12 > GS10. GS10 and GS14 are apparently located in the deeper levels of the membrane interfaces and closer to the hydrophobic core of the bilayers, whereas GS12 and [d-Lys]4GS14 reside closer to the outer boundary of the interface. Because of differing modes of interaction of the cyclic cationic peptides with lipid bilayers, the mechanism of their biological activity (and its relation to peptide-lipid interaction) proved to be versatile and complex, and dependent on the biophysical properties of both the peptides and membranes.     

Lipid-DNA complex formation: reorganization and rupture of lipid vesicles in the presence of DNA as observed by cryoelectron microscopy.

Cryoelectron microscopy has been used to study the reorganization of unilamellar cationic lipid vesicles upon the addition of DNA. Unilamellar DNA-coated vesicles, as well as multilamellar DNA lipid complexes, could be observed. Also, DNA induced fusion of unilamellar vesicles was found. DNA appears to adsorb to the oppositely charged lipid bilayer in a monolayer of parallel helices and can act as a molecular "glue" enforcing close apposition of neighboring vesicle membranes. In samples with relatively high DNA content, there is evidence for DNA-induced aggregation and flattening of unilamellar vesicles. In these samples, multilamellar complexes are rare and contain only a small number of lamellae. At lower DNA contents, large multilamellar CL-DNA complexes, often with >10 bilayers, are formed. The multilamellar complexes in both types of sample frequently exhibit partially open bilayer segments on their outside surfaces. DNA seems to accumulate or coil near the edges of such unusually terminated membranes. Multilamellar lipid-DNA complexes appear to form by a mechanism that involves the rupture of an approaching vesicle and subsequent adsorption of its membrane to a "template" vesicle or a lipid-DNA complex.     

Interaction of the GM2-activator protein with phospholipid-ganglioside bilayer membranes and with monolayers at the air-water interface.

Differential scanning calorimetry (DSC) and film balance measurements were performed to study the interactions of the GalNAcbeta1-->4(NeuAcalpha2-->3)Galbeta1-->4Glc1 -->1'Cer (GM2)-activator protein with phospholipid/ganglioside vesicles and monolayers. The nonglycosylated form of the GM2-activator protein, added to unilamellar lipid vesicles of different composition, causes differential effects on the gel to liquid-crystalline phase transition peaks. The phase transition temperature (Tm) of pure dimyristoylglycerophosphocholine (DMPC) bilayer is slightly decreased. When lipids which specifically bind the GM2-activator protein are incorporated into the vesicles (e.g. a sulfatide or gangliosides) a shoulder in the thermograms at higher temperatures is observed, indicating an increase of the stability of the gel phase in relation to the liquid-crystalline phase. We also studied the surface activity of a glycosylated and a nonglycosylated GM2-activator protein at the air-water interface. The glycosylated form showed a slightly lower surface activity than the GM2-activator protein without oligosaccharide moiety. When the GM2-activator protein is added to the sub-phase of a surface covered with a lipid monolayer, it can only insert into the monolayer and reach the air-water interface below a monolayer pressure of 25 mN.m-1, depending on the lipid composition, and not when the monolayers are at the bilayer equivalence pressure of 30-35 mN.m-1. Particularly for Galbeta1-->3GalNAcbeta1-->4(NeuAcalpha2-->3)Galbeta 1-->4Glc1-->1'Cer (GM1) and GM2 containing films, the critical pressures (picrit) when no additional increase in surface pressure is observed after addition of the protein into the subphase, are much lower. This leads to the conclusion that binding of the GM2 activator protein to the ganglioside headgroups prevents the protein from reaching the air-water interface. The protein is then located preferentially at the lipid-water interface and cannot penetrate into the chain region.     

Preparation and applications of biofunctionalized,supported lipid bilayers and vesicles

Biofunctional surfaces require advanced design and preparation to match the (bio)recognition ability of biological systems [1]. This requires combined topographic, chemical and visco-elastic surface patterns to match proteins at the nm scale and cells at the micrometer scale. One example of biochemical functionalization, presented here, and which is of both fundamental and application interest, is supported biomimectic (cell)membranes. Specifically we describe preparation and applications of supported phospholipid membranes, which can be made on certain surfaces from unilamellar, 25–200 nm vesicles. On SiO2 at normal pH and with neutral lipids, the vesicles first adsorb intact, and then undergo a phase transformation to a supported bilayer. We have studied the coverage-, vesicle size-, and T-dependence of this process [2], using QCM-D [3], AFM, and SPR. When SiO2 is replaced by TiO2, vesicles adsorb intact. A surface pre-covered with intact vesicles, can be AFM patterned into areas with bilayer, vesicles, and empty surface patches [4]. The results depend critically on AFM tip interaction with vesicle and bilayer, which has been modeled by Monte Carlo simulations [5]. These biomembranes are inert towards protein adsorption [6] and cell attachement [7], which opens up for various applications. Addition of functional molecules, allows sensor functions [8]. Another application is functionalized membranes for surface-specific (stem) cell interactions [9].     

The role of the gel <=> liquid-crystalline phase transition in the lung surfactant cycle

Lipid polymorphism plays an important role in the lung surfactant cycle. A better understanding of the influence of phase transitions on the formation of a lipid film from dispersions of vesicles will help to describe the mechanism of action of lung surfactant. The surface pressure (or tension) of dispersions of DPPC, DMPC, and DPPE unilamellar vesicles was studied as a function of temperature. These aggregates rapidly fuse with a clean air-water interface when the system is at their phase transition temperature (Tm), showing a direct correlation between phase transition and film formation. Based on these results, an explanation on how fluid aggregates in the alveolar subphase can form a rigid monolayer at the alveolar interface is proposed.     

Differential interaction of equinatoxin II with model membranes in response to lipid composition

Equinatoxin II is a 179-amino-acid pore-forming protein isolated from the venom of the sea anemone Actinia equina. Large unilamellar vesicles and lipid monolayers of different lipid compositions have been used to study its interaction with membranes. The critical pressure for insertion is the same in monolayers made of phosphatidylcholine or sphingomyelin (approximately 26 mN m(-1)) and explains why the permeabilization of large unilamellar vesicles by equinatoxin II with these lipid compositions is null or moderate. In phosphatidylcholine-sphingomyelin (1:1) monolayers, the critical pressure is higher (approximately 33 mN m(-1)), thus permitting the insertion of equinatoxin II in large unilamellar vesicles, a process that is accompanied by major conformational changes. In the presence of vesicles made of phosphatidylcholine, a fraction of the protein molecules remains associated with the membranes. This interaction is fully reversible, does not involve major conformational changes, and is governed by the high affinity for membrane interfaces of the protein region comprising amino acids 101-120. We conclude that although the presence of sphingomyelin within the membrane creates conditions for irreversible insertion and pore formation, this lipid is not essential for the initial partitioning event, and its role as a specific receptor for the toxin is not so clear-cut.     

Diffusion behavior of lipid vesicles in entangled polymer solutions.

Dynamic light scattering was used to follow the tracer diffusion of phospholipid/cholesterol vesicles in aqueous polyacrylamide solutions and compared with the diffusive behavior of polystyrene (PS) latex spheres of comparable diameters. Over the range of the matrix concentration examined (Cp = 0.1-10 mg/ml), the diffusivities of the PS spheres and the large multilamellar vesicles exhibited the Stokes-Einstein (SE) relation, while the diffusivity of the unilamellar vesicles did not follow the increase of the solution's viscosity caused by the presence of the matrix molecules. The difference between the diffusion behaviors of unilamellar vesicles and hard PS spheres of similar size is possibly due to the flexibility of the lipid bilayer of the vesicles. The unilamellar vesicles are capable of changing their shape to move through the entangled polymer solution so that the hindrance to their diffusion due to the presence of the polymer chains is reduced, while the rigid PS spheres have little flexibility and they encounter greater resistance. The multilamellar vesicles are less flexible, thus their diffusion is similar to the hard PS spheres of similar diameter.     

Physical properties and surface activity of surfactant-like membranes containing the cationic and hydrophobic peptide KL4

Surfactant-like membranes containing the 21-residue peptide KLLLLKLLLLKLLLLKLLLLK (KL4), have been clinically tested as a therapeutic agent for respiratory distress syndrome in premature infants. The aims of this study were to investigate the interactions between the KL4 peptide and lipid bilayers, and the role of both the lipid composition and KL4 structure on the surface adsorption activity of KL4-containing membranes. We used bilayers of three-component systems [1,2-dipalmitoyl-phosphatidylcholine/1-palmitoyl-2-oleoyl-phosphatidylglycerol/palmitic acid (DPPC/POPG/PA) and DPPC/1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC)/PA] and binary lipid mixtures of DPPC/POPG and DPPC/PA to examine the specific interaction of KL4 with POPG and PA. We found that, at low peptide concentrations, KL4 adopted a predominantly alpha-helical secondary structure in POPG- or POPC-containing membranes, and a beta-sheet structure in DPPC/PA vesicles. As the concentration of the peptide increased, KL4 interconverted to a beta-sheet structure in DPPC/POPG/PA or DPPC/POPC/PA vesicles. Ca2+ favored alpha<-->beta interconversion. This conformational flexibility of KL4 did not influence the surface adsorption activity of KL4-containing vesicles. KL4 showed a concentration-dependent ordering effect on POPG- and POPC-containing membranes, which could be linked to its surface activity. In addition, we found that the physical state of the membrane had a critical role in the surface adsorption process. Our results indicate that the most rapid surface adsorption takes place with vesicles showing well-defined solid/fluid phase co-existence at temperatures below their gel to fluid phase transition temperature, such as those of DPPC/POPG/PA and DPPC/POPC/PA. In contrast, more fluid (DPPC/POPG) or excessively rigid (DPPC/PA) KL4-containing membranes fail in their ability to adsorb rapidly onto and spread at the air-water interface.     

Efficient intracellular delivery of oligonucleotides formulated in folate receptor-targeted lipid vesicles

In this study, a novel lipid vector has been developed for targeted delivery of oligodeoxynucleotides (ODN) to tumors that overexpress folate receptor. This is based on a method developed by Semple et al. (1), which utilizes an ionizable aminolipid (1,2-dioleoyl-3-(dimethylammonio)propane, DODAP) and an ethanol-containing buffer system for encapsulating large quantities of polyanionic ODN in lipid vesicles. Folate is incorporated into the lipid vesicles via a distearoylphosphatidylethanolamine-poly(ethylene glycol) (DSPE-PEG) spacer. These vesicles are around 100-200 nm in diameter with an ODN entrapment efficiency of 60-80%. Folate mediated efficient delivery of ODN to KB cells that overexpress folate receptor. Uptake of folate-targeted lipidic ODN by KB cells is about 8-10-fold more efficient than that of lipidic ODN without a ligand or free ODN. This formulation is resistant to serum. Thus, targeted delivery of ODN via this novel lipid vector may have potential in treating tumors that overexpress folate receptors.     

Binding of insulin to the external surface of liposomes: Effect of surface curvature,temperature, and lipid composition

The binding of insulin to the external surface of phosphatidylcholine liposomes as a function of the temperature, the surface curvature, and the composition of lipids was studied. The amount of the saturated binding of insulin to liposomes was assessed by gel-filtration chromatography. The binding of insulin to small unilamellar vesicles was highly dependent upon the temperature, favoring low temperatures. As the temperature increased, there was a distinct temperature range where the binding of insulin to small unilamellar vesicles decreased. The temperature ranges for dimyristoylphosphatidylcholine (DMPC) and dipalmitoylphosphatidylcholine (DPPC) small unilamellar vesicles were found to be 10–20°C and 21–37°C, respectively. These temperature ranges were quite different from the reported ranges of the gel → liquid crystalline phase transition temperatures ($\text{T}{}_{\mathrm{<mtext>c</mtext>}}$) for DMPC or DPPC small unilamellar vesicles. In contrast to other proteins, the amount of insulin bound to DMPC and DPPC small unilamellar vesicles was negligible at or above the upper limit of the above temperature ranges, and increased steadily to 6–7 μmol of insulin per mmol of phospholipid as the temperature decreased to or below the lower limit of these temperature ranges. On the other hand, the binding of insulin to the large multilamellar liposomes cannot be detected at all temperatures tested. The affinity of insulin to neutral phosphatidylcholine small unilamellar vesicles appeared to be related to the surface curvature of the liposomes, favoring the liposomes with a high surface curvature. Furthermore, the amount of insulin bound to small unilamellar vesicles decreased as the content of the cholesterol increased. The presence of 10% molar fraction of phosphatidic acid did not appear to affect the binding of insulin to small unilamellar vesicles. However, the presence of 5% molar fraction of stearylamine in DPPC small unilamellar vesicles increased the amount of bound insulin as well as the extent of aggregation of liposomes. The results of the present study suggest that the interstitial regions of the acyl chains of phospholipids between the faceted planes of small unilamellar vesicles below $\text{T}{}_{\mathrm{<mtext>c</mtext>}}$ may be responsible for the hydrophobic interaction of insulin and small unilamellar vesicles. The tight binding of insulin to certain small unilamellar liposomes could lead to an overestimation of the true amount of insulin encapsulated in liposomes, if care is not taken to eliminate the bound insulin during the procedure of encapsulating insulin in liposomes.     

The effect of liposome size on the final lipid/DNA ratio of cationic lipoplexes

Several studies have demonstrated that lipoplexes are two-phase systems over most mixing lipid/DNA charge ratios. Because these studies have focused on small unilamellar vesicles (SUV), they leave open the question as to whether a similar pattern is followed by other liposome types. The main purpose of this work is to examine the question further by characterizing the assembly of cationic lipoplexes prepared from 1-[2-(oleoyloxy)ethyl]-2-oleyl-3-(2-hydroxyethyl)imidazolinium chloride (DOTIM)/dioleoylphosphatidylethanolamine (DOPE) (1:1) liposomes of various types. Sedimentation in sucrose density gradients reveals that large unilamellar vesicles (LUV) and sedimented multilamellar vesicles (sMLV), as opposed to SUV, form lipoplexes that exist as a single phase over a relatively broad range of mixing (+/-) ratios. This is indicated by observing that most of the LUV and sMLV become involved in the assembly reaction up to mixing (+/-) ratios of 4 and 9, respectively, while only a small and constant fraction of SUV associates with DNA at all mixing (+/-) ratios tested. Consequently, while maximal (+/-) ratios of approximately 4.5 and 9 are found in LUV and sMLV lipoplexes, respectively, a final (+/-) ratio of only approximately 2 is determined in SUV lipoplexes. Isothermal titration calorimetry shows that this is the lowest possible charge ratio achieved when liposomes are titrated with DNA. Based on these observations and on the size differences of the liposomes used, a model of lipoplex formation is proposed.