The use of an improved transposon mutagenesis system for DNA sequencing leads to the characterization of a new insertion sequence of Streptomyces lividans 66

A DNA sequencing strategy was developed based on the tetracycline resistance transposon Tn1721. A universal M13 primer binding site (UP) for DNA sequencing and restriction sites for mapping were inserted near one end of Tn1721 and the new derivative, Tn5491, introduced onto a conjugative F' plasmid. The target sequence is inserted between two inverted resolution sites (res) of Tn1721 present on the high-copy plasmid pJOE2114. Due to the inviability of long palindromic sequences in Escherichia coli insertions between the inversely orientated res sites of pJOE2114 are positively selected. Transposition of Tn5491 into the target sequence is selected by cointegrate formation of Tn5491 during transposition, mating and transfer of the nonconjugative sequencing vector. After cointegrate resolution, the additional res sites in the vector result in a second site-specific recombination removing most of the transposon (except of 136 bp) and part of the target sequence. The reduced plasmid sizes and the use of the universal primer improved the quality of the sequencing results obtained on an automated fluorescent sequencer. A 3.35-kb EcoRI fragment from the 30-kb terminal inverted repeats (TIR) of the Streptomyces lividans chromosome was sequenced by this method. A 1304-bp sequence was found on this fragment with the features of insertion elements. The element called IS1372 had 27-bp IR and two potential open reading frames. The predicted gene products had similar sizes and high similarity to gene products encoded by insertion sequences of the IS3 family. Furthermore, a potential signal stimulating ribosomal shifts and typical for members of the IS3 family was identified. Five to seven copies of IS1372 were found in different strains of S. lividans but none in other Streptomyces species tested     

Nucleotide sequence of the transposable element IS15

We have determined the complete nucleotide sequence of the right (R) copy of the insertion sequence IS15 which flanks, in direct orientation, the composite transposon Tn1525. IS15-R, which is capable of independent transposition, is 1648 bp long and has short (14 bp) perfect inverted repeats at its termini. Analysis of the nucleotide sequence indicates that IS15-R results from the transposition, in direct orientation, of a smaller (820 bp long) IS, designated IS15-Δ, into itself. This integration event is accompanied by the duplication of 8 bp in the target DNA. IS15-Δ possesses two large overlapping open reading frames (ORF) located on opposite strands. Because of this particular structure, IS15 possesses four large ORFs which, due to the integration event, exhibit some differences with those of the parental 1S15-Δ.     

The nucleotide sequence and protein-coding capability of the transposable element IS5

The nucleotide sequence of IS5, a bacterial insertion sequence, has been determined. It is 1195 bp long and contains an inverted terminal repetition of 16 bp with one mismatch. One open reading frame, spanning nearly the entire length of the element, could encode a polypeptide of 338 amino acids. Upon insertion into a DNA segment, IS5 causes a duplication of 4 bp. Based on seven examples, this site of insertion appears to be nonrandom, and the consensus target site sequence is C . T/A . A . G/A (or C/T . T . A/T . G on the opposite strand). The nucleotide sequences of IS5 insertions into the B and cim genes of bacteriophage Mu have allowed tentative identification of the protein-coding frames of B and cim.     

Jhe in Gryllus assimilis: cloning, sequence-activity associations and phylogeny

The 458 amino acid sequence of a mature JHE protein from the cricket Gryllus assimilis was identified after isolating the partial cDNA sequence encoding this protein from a fat body and midgut cDNA library. This hemimetabolan JHE sequence shows over 40% amino acid similarity to the known JHE sequences of several holometabolous insects. It also includes previously determined peptide sequences for G. assimilis JHE as well as two other motifs associated with JHE enzymes in holometabolous insects. The predicted molecular weight of the protein agrees with that of the JHE previously purified from G. assimilis. Partial genomic sequence encoding the Jhe contains two large (1330 and 2918 bp) introns. No coding DNA sequence variation was observed over a 1293 bp region between selected lines differing six to eight-fold in hemolymph JHE activity. However, a 19 bp indel was found in one of the introns; the insertion was strongly associated with elevated hemolymph activity, both in the selected lines and in the F₂ progeny of crosses between them. Phylogenetic analyses localised the G. assimilis JHE to a clade containing dipteran and coleopteran JHEs, with lepidopteran JHEs occurring in a separate clade.     

DNA sequence analysis of Tn10 insertions: origin and role of 9 bp flanking repetitions during Tn10 translocation.

The sequences of insertions of the translocatable tetracycline-resistance element Tn10 into the repressor (cl) gene of bacteriophage lambda have been analyzed. Each insertion contains the same discrete set of Tn10 sequences flanked by a direct repetition of a 9 bp cl-gene sequence. The flanking repititions are generated by duplication of information present only in the target DNA molecule rather than by a Campbell-type recombination event between one 9 bp sequence on the target DNA and a second one provided on the incoming element. The repetitions do not contain genetic or structural information important for translocation. A genetically constructed Tn10 insertion which lacks flanking repetitions is fully functional in translocation to a new position. Tn10 insertions cluster at preferred positions along a target DNA (Kleckner et al., 1979). Sequence analysis shows that four independently isolated cl::Tn10 insertions occur at identical positions in the cl gene. We speculate that homology between Tn10 and its target, at some distance from the site of the actual recombination event, could be relevant to the preference of Tn10 for particular insertion sites.     

Characterisation of the beta-tubulin gene of Cylicocyclus nassatus?

mRNA and genomic DNA were isolated from adult Cylicocyclus nassatus, and the mRNA was reverse transcribed. The cDNA was PCR amplified using degenerate primers designed according to the alignment of the β-tubulin amino acid sequences of other species. To complete the coding sequence, the 3′ end was amplified with the 3′-RACE, and for amplification of the 5′ end the SL1-primer was used. The cDNA of the β-tubulin gene of C. nassatus spans 1429 bp and encodes a protein of 448 amino acids. Specific primers were developed from the cDNA sequence to amplify the genomic DNA sequence and to analyse the genomic organisation of the β-tubulin gene. The complete sequence of the genomic DNA of the β-tubulin gene of C. nassatus has a size of 2652 bp and is organised into nine exons and eight introns. The identities with the exons of the gru-1 β-tubulin gene of Haemonchus contortus range between 79% and 97%.     

IS1 insertion generates duplication of a nine base pair sequence at its target site.

Three independent integrations of the E. coli insertion sequence, IS1, into the gal operon have been analyzed. DNA sequences of portions of the wild-type galT gene which act as the target sites for these insertions, as well as the corresponding gal/IS1 junctions, are reported. Two features are particularly noteworthy. First, similar sequences appearing in inverted orientation consitute the ends of IS1: 18 of the terminal 23 base pairs at each end are identical. Second, in all three insertions, a 9 base pair segment found once in the wild-type sequence at the site of insertion is duplicated and appears in the same orientation at each end of the inserted element. The sequence of this 9 base pair repeat is different for each insertion analyzed. No homology between the inverted repeat sequences at the ends of IS1 and the sequences of the target sites is observed. Models for the mechanism of IS1 insertion are proposed.     

利用Tn5型转座突变系统筛选高产阿维菌素菌株*

目的: 转座突变技术是发现新功能基因和获得高产天然产物菌株的一种有效策略。通过理性设计和构建Tn5型转座突变系统,并将其应用于阿维链霉菌,筛选高产阿维菌素的工程菌株。方法: 在转座突变载体pUCTN转座插入片段的上游和下游分别引入链霉菌常用的强启动子kasOp*和P21,强化插入位置上游和下游基因的转录表达;在插入片段两端分别添加双向转录终止子T1和T2,有效终止插入序列两端靶基因的转录,引入强启动子和终止子的目的在于增强对转座突变株生理代谢活动的扰动。结果: 通过优化供体菌和受体菌的比例,转座效率显著提高。随机选择500株转座突变株进行发酵和阿维菌素产量测试,筛选到3株突变株的阿维菌素产量明显高于出发菌株产量的50%以上。结论: Tn5转座突变系统为研究阿维链霉菌的基因功能和生理代谢提供了有效的分子遗传工具。     

Transfer RNA Genes Are Genomic Targets for De Novo Transposition of the Yeast Retrotransposon Ty3

Insertions of the yeast element Ty3 resulting from induced retrotransposition were characterized in order to identify the genomic targets of transposition. The DNA sequences of the junctions between Ty3 and flanking DNA were determined for two insertions of an unmarked element. Each insertion was at position -17 from the 5' end of a tRNA-coding sequence. Ninety-one independent insertions of a marked Ty3 element were studied by Southern blot analysis. Pairs of independent insertions into seven genomic loci accounted for 14 of these insertions. The DNA sequence flanking the insertion site was determined for at least one member of each pair of integrated elements. In each case, insertion was at position -16 or -17 relative to the 5' end of one of seven different tRNA genes. This proportion of genomic loci used twice for Ty3 integration is consistent with that predicted by a Poisson distribution for a number of genomic targets roughly equivalent to the estimated number of yeast tRNA genes. In addition, insertions upstream of the same tRNA gene in one case were at different positions, but in all cases were in the same orientation. Thus, genomic insertions of Ty3 in a particular orientation are apparently specified by the target, while the actual position of the insertion relative to the tRNA-coding sequence can vary slightly.     

Nucleotide sequence analysis of the linked left and right hand terminal regions of adenovirus type 5 DNA present in the transformed rat cell line 5RK20.

A peculiar phenomenon is observed in several adenovirus type 2 or 5 (Ad2 or Ad5) transformed cell lines: the right hand and left hand terminal regions of the viral genome present in the viral DNA insertions of these cell lines are found to be linked together. A large part of the viral DNA insertion present in the Ad5 transformed rat cell line 5RK20 has been cloned in the lambda vector Charon21A, including the segment containing the linked terminal regions. Sequence analysis of the linkage region showed a perfect homology with the Ad5 DNA sequence and a direct linkage of basepair (bp) 63 of the left hand end of the viral genome to bp 108 of the right hand end. No cellular or rearranged viral sequences were present. Our findings suggest that the joining of viral sequences into the cellular genome.     

In vitro transposition of ISY100, a bacterial insertion sequence belonging to the Tc1/mariner family

The Synechocystis sp. PCC6803 insertion sequence ISY100 (ISTcSa) belongs to the Tc1/mariner/IS630 family of transposable elements. ISY100 transposase was purified and shown to promote transposition in vitro. Transposase binds specifically to ISY100 terminal inverted repeat sequences via an N-terminal DNA-binding domain containing two helix-turn-helix motifs. Transposase is the only protein required for excision and integration of ISY100. Transposase made double-strand breaks on a supercoiled DNA molecule containing a mini-ISY100 transposon, cleaving exactly at the transposon 3' ends and two nucleotides inside the 5' ends. Cleavage of short linear substrates containing a single transposon end was less precise. Transposase also catalysed strand transfer, covalently joining the transposon 3' end to the target DNA. When a donor plasmid carrying a mini-ISY100 was incubated with a target plasmid and transposase, the most common products were insertions of one transposon end into the target DNA, but insertions of both ends at a single target site could be recovered after transformation into Escherichia coli. Insertions were almost exclusively into TA dinucleotides, and the target TA was duplicated on insertion. Our results demonstrate that there are no fundamental differences between the transposition mechanisms of IS630 family elements in bacteria and Tc1/mariner elements in higher eukaryotes.     

New transposable elements identified as insertions in rice transposon Tnr1

Tnr1 (235 bp long) is a transposable element in rice. Polymerase chain reactions (PCRs) done with a primer(s) that hybridizes to terminal inverted repeat sequences (TIRs) of Tnr1 detected new Tnr1 members with one or two insertions in rice genomes. Six identified insertion sequences (Tnr4, Tnr5, Tnr11, Tnr12, Tnr13 and RIRE9) did not have extensive homology to known transposable elements, rather they had structural features characteristic of transposable elements. Tnr4 (1767 bp long) had imperfect 64-bp TIRs and appeared to generate duplication of a 9-bp sequence at the target site. However, the TIR sequences were not homologous to those of known transposable elements, indicative that Tnr4 is a new transposable element. Tnr5 (209 bp long) had imperfect 46-bp TIRs and appeared to generate duplication of sequence TTA like that of some elements of the Tourist family. Tnr11 (811 bp long) had 73-bp TIRs with significant homology to those of Tnr1 and Stowaway and appeared to generate duplication of sequence TA, indicative that Tnr11 is a transposable element of the Tnr1/Stowaway family. Tnr12 (2426 bp long) carried perfect 9-bp TIRs, which began with 5'-CACTA- -3' from both ends and appeared to generate duplication of a 3-bp target sequence, indicative that Tnr12 is a transposable element of the En/Spm family. Tnr13 (347 bp long) had 31-bp TIRs and appeared to generate duplication of an 8-bp target sequence. Two sequences, one the transposon-like element Crackle, had partial homology in the Tnr13 ends. All five insertions appear to be defective elements derived from autonomous ones encoding the transposase gene. All had characteristic tandem repeat sequences which may be recognized by transposase. The sixth insertion sequence, named RIRE9 (3852 bp long), which begins with 5'-TG- -3' and ends with 5'- -CA-3', appeared to generate duplication of a 5-bp target sequence. These and other structural features indicate that this insertion is a solo LTR (long terminal repeat) of a retrotransposon. The transposable elements described above could be identified as insertions into Tnr1, which do not deleteriously affect the growth of rice cells.     

DNA sequence analysis of host range mutants of the promiscuous IncP-1 plasmids R18 and R68 with Tn7 insertions in oriV

Transposon Tn7 insertions in the origin of vegetative replication (oriV) result in host range mutants of the promiscuous IncP-1 plasmids R18 and R68 which affect plasmid replication in Escherichia coli but not in Pseudomonas aeruginosa. The sites of these insertions have been analyzed by DNA sequence analysis. In two mutants, the insertions generated direct duplications of 5′GTATT3′ at the target site which included the first base at the 5′ end of the fourth 17-bp direct repeat in oriV. In a third mutant the duplication of 5′GACAC3′ also involved the same direct repeat also at the 5′ end but contiguous with the previous duplication. DNA sequence analysis of another Tn7-induced host range mutant of R18, characterized by reduced conjugational transmissibility into P. stutzeri while retaining normal transmissibility within P. aeruginosa, showed that the insertion generated a 474-bp deletion which brought the insertion 20 bp 5′ to the 17-bp direct repeat between oriV and the oxytetracycline hydrochloride-resistant gene. The analysis of the DNA sequence data at the site of the Tn7 insertions shows that particular segments of the DNA sequence in oriV are differentially required for the replication of these plasmids in different bacterial hosts and thus of importance to the promiscuity of these plasmids.     

Chloroplast DNA insertions into the nuclear genome of rice: the genes,sites and ages of insertion involved

Rice (Oryza sativa) is one of three predominant grain crops, and its nuclear and organelle genomes have been sequenced. Following genome analysis revealed many exchanges of DNA sequences between the nuclear and organelle genomes. In this study, a total of 45 chloroplast DNA insertions more than 2 kb in length were detected in rice nuclear genome. A homologous recombination mechanism is expected for those chloroplast insertions with high similarity between their flanking sequences. Only five chloroplast insertions with high sequence similarity between two flanking sequences from an insertion were found in the 45 insertions, suggesting that rice might follow the non-homologous end-joining (NHEJ) repair of double-stranded breaks mechanism, which is suggested to be common to all eukaryotes. Our studies indicate that the most chloroplast insertions occurred at a nuclear region characterized by a sharp change of repetitive sequence density. One potential explanation is that regions such as this might be susceptible target sites or “hotspots” of DNA damage. Our results also suggest that the insertion of retrotransposon elements or non-chloroplast DNA into chloroplast DNA insertions may contribute significantly to their fragmentation process. Moreover, based on chloroplast insertions in nuclear genomes of two subspecies (indica and japonica) of cultivated rice, our results strongly suggest that they diverged during 0.06–0.22 million years ago. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Insertion and excision of Bacteroides conjugative chromosomal elements.

Many strains of Bacteroides harbor large chromosomal elements that can transfer themselves from the chromosome of the donor to the chromosome of the recipient. Most of them carry a tetracycline resistance (Tcr) gene and have thus been designated Tcr elements. In the present study, we have used transverse alternating field electrophoresis to show that all but one of the Tcr elements screened were approximately 70 to 80 kbp in size. The exception (Tcr Emr 12256) was 150 to 200 kbp in size and may be a hybrid element. All of the Tcr elements inserted in more than one site, but insertion was not random. The Tcr elements sometimes cotransfer unlinked chromosomal segments, or nonreplicating Bacteroides units (NBUs). Transverse alternating field electrophoresis analysis showed that insertion of NBUs was not random and that the NBUs did not insert near the Tcr element. Although attempts to clone one or both ends of a Tcr element have not been successful, ends of a cryptic element (XBU4422) were cloned previously and shown to be homologous to the ends of Tcr elements. We have obtained DNA sequences of junction regions between XBU4422 and its target from several different insertions. Comparison of junction sequences with target sequences showed that no target site duplication occurred during insertion and that XBU4422 carried 4 to 5 bp of adjacent chromosomal DNA when it excised from the chromosome and inserted in a plasmid. We identified a short region of sequence similarity between one of the ends of XBU4422 and its target site that may be important for insertion. This sequence contained an 8-bp segment that was identical to the recombinational hot spot sequence on Tn21. XBU4422 could exise itself from plasmids into which it inserted. In most cases, the excision left a single additional A behind in the target site, but precise excision was seen in one case.