Supramolecular assembly using helical peptides

We investigated supramolecular assemblies of various hydrophobic helical peptides. The assemblies were formed at the air/water interface or in aqueous medium. The hexadecapeptide, Boc-(Ala-Aib)₈-OMe (BA16M), was reported to take α-helical structure by X-ray analysis. Several derivatives were prepared, which have the repeating sequence of Ala-Aib, Lys(Z)-Aib or Leu-Aib, or have the terminal chemically modified. CD spectra of the peptides indicated helical conformation in ethanol solution. The surface pressure-area isotherms of the peptide monolayers showed an inflection at the surface area corresponding to the cross section along the helix axis, and the monolayers were collapsed by further compression. All the helical peptides oriented their helix axis parallel to the air/water interface on the basis of the results of transmission IR spectra and RAS of the monolayers transferred onto substrates.A small mound was observed in the isotherm of BA16M and other derivatives, which was ascribed to the phase transition from the liquid state to the solid state. One mol% of FITC-labeled peptide was mixed into the monolayers to visualize the phase separation of the solid and liquid states at the surface pressure of the coexisting region. Various shapes of the dark domain were observed at the top of the mound in the isotherms by fluorescence microscopy. The helical peptides formed two-dimensional crystals at the air/water interface when they were compressed to the solid state.An amino-terminated helical peptide, HA16B, was suspended in an aqueous medium by a sonication method and transparent dispersion was obtained. The dynamic light scattering measurement of the dispersion revealed the particle size of 75 nm with a narrow size distribution. The molecular assembly of the helical peptide in water was called “Peptosome”, because it takes a vesicular structure.     

Individual amino acid residues in CLV3 peptide contribute to its stability in vitro

CLV3 acts as a peptide ligand to interact with leucine-rich repeat (LRR) receptor kinases in neighboring cells to restrict the size of shoot apical meristems (SAMs) in Arabidopsis. To examine contributions of individual amino acid residues in CLV3 peptide in SAM maintenance, 12 synthetic Ala-substituted CLV3 peptides were applied to clv3-2 seedlings cultured in vitro, and the sizes of SAMs were measured after 9 d. The result showed that Pro-9 and His-11 are the most critical residues, while Val-3 and Ser-5 are the least important ones for CLV3 functions in SAMs in vitro. With MALDI-TOF mass spectrum analyses, we further showed that Ala substitution in His-11 led to a greatly reduced stability of the peptide, leading to a complete degradation of the peptide after cultured with seedlings for only one hour. The substitution of Pro-9 by Ala also led to a complete degradation of the peptides after 2 d incubation. In contrast, Ala substitutions in Val-3 or Ser-5 gave very little changes on peptide stabilities. These results suggested that stabilities of Ala-substituted CLV3 peptides are positively correlated with their activities in SAMs. We thus propose that the stability of CLV3 may partially contribute to its function in SAM maintenance.     

Square Wave Voltammetry of TNT at Gold Electrodes Modified with Self-Assembled Monolayers Containing Aromatic Structures

Square wave voltammetry for the reduction of 2,4,6-trinitrotoluene (TNT) was measured in 100 mM potassium phosphate buffer (pH 8) at gold electrodes modified with self-assembled monolayers (SAMs) containing either an alkane thiol or aromatic ring thiol structures. At 15 Hz, the electrochemical sensitivity (µA/ppm) was similar for all SAMs tested. However, at 60 Hz, the SAMs containing aromatic structures had a greater sensitivity than the alkane thiol SAM. In fact, the alkane thiol SAM had a decrease in sensitivity at the higher frequency. When comparing the electrochemical response between simulations and experimental data, a general trend was observed in which most of the SAMs had similar heterogeneous rate constants within experimental error for the reduction of TNT. This most likely describes a rate limiting step for the reduction of TNT. However, in the case of the alkane SAM at higher frequency, the decrease in sensitivity suggests that the rate limiting step in this case may be electron tunneling through the SAM. Our results show that SAMs containing aromatic rings increased the sensitivity for the reduction of TNT when higher frequencies were employed and at the same time suppressed the electrochemical reduction of dissolved oxygen.     

Multiple polymer architectures of human polyhomeotic homolog 3 sterile alpha motif

The self‐association of sterile alpha motifs (SAMs) into a helical polymer architecture is a critical functional component of many different and diverse array of proteins. For the Drosophila Polycomb group (PcG) protein Polyhomeotic (Ph), its SAM polymerization serves as the structural foundation to cluster multiple PcG complexes, helping to maintain a silenced chromatin state. Ph SAM shares 64% sequence identity with its human ortholog, PHC3 SAM, and both SAMs polymerize. However, in the context of their larger protein regions, PHC3 SAM forms longer polymers compared with Ph SAM. Motivated to establish the precise structural basis for the differences, if any, between Ph and PHC3 SAM, we determined the crystal structure of the PHC3 SAM polymer. PHC3 SAM uses the same SAM–SAM interaction as the Ph SAM sixfold repeat polymer. Yet, PHC3 SAM polymerizes using just five SAMs per turn of the helical polymer rather than the typical six per turn observed for all SAM polymers reported to date. Structural analysis suggested that malleability of the PHC3 SAM would allow formation of not just the fivefold repeat structure but also possibly others. Indeed, a second PHC3 SAM polymer in a different crystal form forms a sixfold repeat polymer. These results suggest that the polymers formed by PHC3 SAM, and likely others, are dynamic. The functional consequence of the variable PHC3 SAM polymers may be to create different chromatin architectures. Proteins 2014; 82:2823–2830. © 2014 Wiley Periodicals, Inc.     

Contributions of individual amino acid residues to the endogenous CLV3 function in shoot apical meristem maintenance in Arabidopsis

As a peptide hormone, CLV3 restricts the stem cell number in shoot apical meristem (SAM) by interacting with CLV1/CLV2/CRN/RPK2 receptor complexes. To elucidate how the function of the CLV3 peptide in SAM maintenance is established at the amino acid (AA) level, alanine substitutions were performed by introducing point mutations to individual residues in the peptide-coding region of CLV3 and its flanking sequences. Constructs carrying such substitutions, expressed under the control of CLV3 regulatory elements, were transformed to the clv3-2 null mutant to evaluate their efficiencies in complementing its defects in SAMs in vivo. These studies showed that aspartate-8, histidine-11, glycine-6, proline-4, arginine-1, and proline-9, arranged in an order of importance, were critical, while threonine-2, valine-3, serine-5, and the previously assigned hydroxylation and arabinosylation residue proline-7 were trivial for the endogenous CLV3 function in SAM maintenance. In contrast, substitutions of flanking residues did not impose much damage on CLV3. Complementation of different alanine-substituted constructs was confirmed by measurements of the sizes of SAMs and the WUS expression levels in transgenic plants. These studies established a complete contribution map of individual residues in the peptide-coding region of CLV3 for its function in SAM, which may help to understand peptide hormones in general.     

Comparison of helix-stabilizing effects of alpha,alpha-dialkyl glycines with linear and cycloalkyl side chains

The ability of alpha, alpha-di-n-alkyl glycines with linear and cyclic alkyl side chains to stabilize helical conformations has been compared using a model heptapeptide sequence. The conformations of five synthetic heptapeptides (Boc-Val-Ala-Leu-Xxx-Val-Ala-Leu-OMe, Xxx = Ac8c, Ac7c, Aib, Dpg, and Deg, where Ac8c = 1-aminocyclooctane-1-carboxylic acid, Ac7c = 1-aminocycloheptane-1-carboxylic acid, Aib = alpha-aminoisobutyric acid, Dpg = alpha,alpha-di-n-propyl glycine, Deg = alpha,alpha-di-n-ethyl glycine) have been investigated. In crystals, helical conformations have been demonstrated by x-ray crystallography for the peptides, R-Val-Ala-Leu-Dpg-Val-Ala-Leu-OMe, (R = Boc and acetyl). Solution conformations of the five peptides have been studied by 1H-nmr. In the apolar solvent CDCl3, all five peptides favor helical conformations in which the NH groups of residues 3-7 are shielded from the solvent. Successive NiH<-->Ni + 1H nuclear Overhauser effects over the length of the sequence support a major population of continuous helical conformations. Solvent titration experiments in mixtures of CDCl3/DMSO provide evidence for solvent-dependent conformational transitions that are more pronounced for the Deg and Dpg peptides. Solvent-dependent chemical shift variations and temperature coefficients in DMSO suggest that the conformational distributions in the Deg/Dpg peptides are distinctly different from the Aib/Acnc peptides in a strongly solvating medium. Nuclear Overhauser effects provide additional evidence for the population of extended backbone conformations in the Dpg peptide, while a significant residual population of helical conformations is still detectable in the isomeric Ac7c peptide in DMSO.     

Electrochemical studies of DNA immobilization onto the azide-terminated monolayers and its interaction with taxol

A surface modification procedure for the creation of self-assembled monolayers (SAMs) that can be used as a scaffold for double-stranded DNA (dsDNA) incorporation onto the gold surfaces is described. The SAMs of an azidohexane thiol derivative were prepared on the Au electrode and then used for the immobilization of dsDNA. The electrochemical characteristics of dsDNA onto the SAM-modified gold electrode were investigated by cyclic voltammetry and electrochemical impedance spectroscopy, and the surface concentration of dsDNA onto the SAMs surface was estimated. The interaction of dsDNA with the anticancer drug, taxol (paclitaxel), was also studied on the surface of DNA/SAM/Au electrode. The observed decrease in the guanine oxidation peak current was used to monitor the interaction of taxol with DNA. The resulting Langmuir isotherm for taxol binding to DNA at the modified electrode was used to evaluate the binding constant of taxol-DNA. The results obtained supported the groove binding interaction of taxol with DNA. The modified electrode was used as a sensitive sensor for quantification of taxol in human serum sample.     

Cyclization of a cytolytic amphipathic alpha-helical peptide and its diastereomer: effect on structure, interaction with model membranes, and biological function

The amphipathic alpha-helical structure is considered to be a prerequisite for the lytic activity of a large group of cytolytic peptides. However, despite numerous studies on the contribution of various parameters to their structure and activity, the importance of linearity has not been examined. In the present study we functionally and structurally characterized a linear amphipathic alpha-helical peptide (wt peptide), its diastereomer, and cyclic analogues of both. Using analogues with the same sequence of hydrophobic and positively charged amino acids, but with different propensities to form a helical structure, we were able to examine the contribution of linearity to helix formation, bilogical function, and membrane binding and permeation. Importantly, we found that cyclization increases the selectivity between bacteria and human erythrocytes by substantially reducing the hemolytic activity of the cyclic peptides compared with the linear peptides. Moreover, whereas the wt peptide was highly active toward gram(+) bacteria, its cyclic counterpart is active toward both gram(+) and gram(-) bacteria. These findings are correlated with an impaired ability of the cyclic analogues to bind and permeate zwitterionic phospholipid membranes compared with their linear counterparts and an increase in the binding and permeating activity of the cyclic wt peptide toward negatively charged membranes. Furthermore, cyclization abolished the oligomerization of the linear wt peptide in solution and in SDS, suggesting an additional factor that may account for the difference in the spectrum of antibacterial activity between the linear and the cyclic wt peptides. Interestingly, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy revealed that, despite cyclization and incorporation of 33% D-amino acids along the peptide backbone, the membrane environment can impose a predominantly helical structure on the peptides, which is required for their bilogical function. Overall, our results indicate that linearity is not a prerequisite for lytic activity of amphipathic alpha-helical peptides but rather affects the selectivity between gram(+) and gram(-) bacteria and between mammalian cells and bacteria. In addition, the combination of incorporating of D-amino acids into lytic peptides and their cyclization open the way for developing a new group of antimicrobial peptides with improved properties for treating infectious diseases.     

Stapling mimics noncovalent interactions of γ-carboxyglutamates in conantokins, peptidic antagonists of N-methyl-D-aspartic acid receptors

Conantokins are short peptides derived from the venoms of marine cone snails that act as antagonists of the N-methyl-D-aspartate (NMDA) receptor family of excitatory glutamate receptors. These peptides contain γ-carboxyglutamic acid residues typically spaced at i,i+4 and/or i,i+7 intervals, which by chelating divalent cations induce and stabilize helical conformation of the peptide. Introduction of a dicarba bridge (or a staple) can covalently stabilize peptide helicity and improve its pharmacological properties. To test the hypothesis that stapling can effectively replace γ-carboxyglutamic acid residues in stabilizing the helical conformation of conantokins, we designed, synthesized, and characterized several stapled analogs of conantokin G (conG), with varying connectivities in terms of staple length and location along the face of the α-helix. NMR studies confirmed that the ring-closing metathesis reaction yielded a single product with the Z configuration of the olefinic bond. Based on circular dichroism and molecular modeling, the stapled analogs exhibited significantly enhanced helicity compared with the native peptide in a metal-free environment. Stapling i,i+4 was benign with respect to effects on in vitro and in vivo pharmacological properties. One analog, namely conG[11-15,S(i,i+4)S(8)], blocked NR2B-containing NMDA receptors with IC(50) = 0.7 μm and provided significant protection in the 6-Hz psychomotor model of pharmacoresistant epilepsy in mice. Remarkably, unlike native conG, conG[11-15,S(i,i+4)S(8)] produced no behavioral motor toxicity. Our results extend the applications of peptide stapling to helical peptides with extracellular targets and provide a means for engineering conantokins with improved pharmacological properties.     

Revisiting peptide amphiphilicity for membrane pore formation

It has previously been shown that an amphipathic de novo designed peptide made of 10 leucines and four phenylalanines substituted with crown ethers induces vesicle leakage without selectivity. To gain selectivity against negatively charged dimyristoylphosphatidylglycerol (DMPG) bilayers, one or two leucines of the peptide were substituted with positively charged residues at each position. All peptides induce significant calcein leakage of DMPG vesicles. However, some peptides do not induce significant leakage of zwitterionic dimyristoylphosphatidylcholine vesicles and are thus active against only bacterial model membranes. The intravesicular leakage is induced by pore formation instead of membrane micellization. Nonselective peptides are mostly helical, while selective peptides mainly adopt an intermolecular β-sheet structure. This study therefore demonstrates that the position of the lysine residues significantly influences the secondary structure and bilayer selectivity of an amphipathic 14-mer peptide, with β-sheet peptides being more selective than helical peptides.     

Conformation of peptides constructed from achiral amino acid residues Aib and DeltaZPhe: computational study of the effect of L/D- Leu at terminal positions

Conformational studies of the peptides constructed from achiral amino acid residues Aib and Delta(Z)Phe (I) Ac-Aib-Delta(Z)Phe-NHMe (II), and Ac-(Aib-Delta(Z)Phe)(3)-NHMe; peptides III-VI having L-Leu or D-Leu at either the N- or the C-terminal position and of peptides VII-X having Leu residues in different enantiomeric combinations at both the N- and the C-terminal positions in peptide II have been studied to design the peptide with the required helical sense. Peptide II, as expected, adopts degenerate left- and right-handed helical structures. It has been shown that the peptides IV and VI having D-Leu at either the N or the C terminus can be realized in the right-handed helical structure with the phi,psi values of -20 degrees and -60 degrees for the Aib/Delta(Z)Phe residues. L-Leu and D- Leu at both the terminals in peptides VII and VIII, respectively, have hardly any effect as both the left- and the right-handed structures are found to be degenerate. Peptides III and IX can be realized in right- and left-handed helical structures, respectively, in solvents of low polarity whereas peptides V and X are predicted to be in the right-handed helical structures stabilized by carbonyl-carbonyl interactions without the formation of hydrogen bonds. The conformational states with the phi,psi values of 0 degrees and -85 degrees in peptide V are characterized by rise per residue of 2.03 A, rotation per residue of 117.5 degrees , and 3.06 residues per turn. In all peptides having Leu residue at the N terminus, the methyl moiety of the acetyl group is involved in the CH/pi interactions with the Cepsilon--Cdelta edge of the aromatic ring of Delta(Z)Phe (3) and the amino group NH of Delta(Z)Phe is involved in the NH/pi interactions with its own aromatic ring. The CH(3) groups of the Aib residues are also involved in CH/pi interactions with the i + 1th and i + 3th Delta(Z)Phe's aromatic side chains.     

Structural and ICAM-1-docking properties of a cyclic peptide from the I-domain of LFA-1: an inhibitor of ICAM-1/LFA- 1-mediated T-cell adhesion

The purpose of this work was to study the conformation of cyclic peptide 1, cyclo(1,12)-Pen1-Ile2-Thr3-Asp4-Gly5-Glu6-Ala7- Thr8-Asp9-Ser10-Gly11-Cys12-OH, derived from the I-domain of the LFA-1 alpha-subunit. We found that cyclic peptide 1 can bind to the D1-domain of ICAM-1 and inhibit ICAM-1/LFA-1-mediated homotypic and heterotypic T-cell adhesion. To understand the bioactive conformation and binding requirements for cyclic peptide 1, its solution structure was studied using NMR, CD, and molecular dynamics simulations. Furthermore, possible binding properties between the cyclic peptide and the D1-domain of ICAM-1 were evaluated using docking experiments. This cyclic peptide has a stable betaII -turn at Asp4- Gly5-Glu6-Ala7 and a betaI-turn at Pen1-Ile2-Thr3-Asp4; a less stable betaV-turn is found at the C-terminal region. The beta-turn at Asp4- Gly5-Glu6-Ala7 was also found in the X-ray structure of the I-domain of LFA-1. Our CD studies showed that the peptide binds to calcium/magnesium and forms a 1:1 (peptide:calcium/magnesium) complex with low cation concentrations and multiple types of complexes with higher cation concentrations. Binding to divalent cations causes a conformational change in peptide 1; this is consistent with our previous study that binding of peptide 1 to ICAM-1 was influenced by divalent cations. Docking studies show the interaction between cyclic peptide 1 and the D1-domain of ICAM-1; it indicates that the Ile2-Thr3-Asp4-Gly4-Glu6-Ala7-Thr8 sequence interacts with the F and C strands of the D1-domain. Finally, these studies will help us design a new generation of selective peptides that may bind better to the D1-domain of ICAM-1.     

Analysis by NMR spectroscopy of the structural homology between the linear and the cyclic peptide recognized by anti-human leukocyte antigen class I monoclonal antibody TP25.99*

The anti-human leukocyte antigen (HLA) class I monoclonal antibody (mAb) TP25.99 has a unique specificity since it recognizes both a conformational and a linear determinant expressed on the beta(2)-mu-associated and beta(2)-mu-free HLA class I heavy chains, respectively. Previously, we reported the identification of a cyclic and a linear peptide that inhibits mAb TP25.99 binding to the beta(2)-mu-associated and beta(2)-mu-free HLA class I heavy chains (S. A. Desai, X. Wang, E. J. Noronha, Q. Zhou, V. Rebmann, H. Grosse-Wilde, F. J. Moy, R. Powers, and S. Ferrone, submitted for publication). The linear X(19) and cyclic LX-8 peptides contain sequence homologous to residues 239-242, 245, and 246 and to residues 194-198, respectively, of HLA class I heavy chain alpha(3) domain. Analysis by two-dimensional transfer nuclear Overhauser effect spectroscopy of the induced solution structures of the linear X(19) and cyclic LX-8 peptides in the presence of mAb TP25.99 showed that the two peptides adopt a similar structural motif despite the lack of sequence homology. The backbone fold is suggestive of a short helical segment followed by a tight turn, reminiscent of the determinant loop region (residues 194-198) on beta(2)-mu-associated HLA class I heavy chains. The structural similarity between the linear X(19) and cyclic LX-8 peptides and the lack of sequence homology suggests that mAb TP25.99 predominantly recognizes a structural motif instead of a consensus sequence.     

In vitro activity profiles of cyclic and linear enkephalin pseudopeptide analogs

The peptide bond in the 4-5 position of the cyclic and linear enkephalin analogs H-Tyr-cyclo[-D-Lys-Gly-Phe-L(or D)-Leu-] and H-Tyr-D-Ala-Gly-Phe-L(or D)-Leu-OH was replaced by a thiomethylene ether linkage. Each of the configurational isomers of the cyclic pseudopeptide H-Tyr-cyclo[-D-Lys-Gly-Phe psi [CH2S]L(or D)-Leu-] showed high potency in both the guinea pig ileum and the mouse vas deferens assay and, therefore, had no preference for either mu- or delta-opioid receptors, in contrast to the cyclic parent peptides H-Tyr-cyclo[-D-Lys-Gly-Phe-L(or D)-Leu-] which are mu-receptor selective. The loss of selectivity observed with the cyclic pseudopeptides may be due to the greater flexibility of their 18-membered ring structures as a consequence of the peptide bond substitution. The linear pseudopeptide analogs were both less potent and less delta-receptor selective than their parent compounds. These results indicate that thiomethylene ether peptide bond replacements can have a pronounced effect on the activity profile of peptide hormones and neurotransmitters.     

Bis[(benzo-15-crown-5)-15-yl methyl] pimelate forms ion channels in planar lipid bilayer: a novel model ion channel

Some crown ethers translocate cations across the liposomal membrane either by a carrier mechanism or by forming ion channels. We report formation of ion channels in lipid bilayer membranes by bis[(benzo-15-crown-5)-15-yl methyl] pimelate, a crown ether known to form ion inclusion complexes with alkali metal cations. The channels have characteristic long openings lasting several seconds and a low conductance (4 pS in 500 mM KCl and 2.5 pS in 500 mM NaCl). A model of the crown ether channel formed by stacking of four monomers is proposed. A large database of structural information on crown ethers and their ion inclusion complexes as well as large family of crown ethers with a variety of substitutions in the ring are commercially available. Thus the crown ether channel is an attractive model system to study the role of various chemical moieties in ion conduction which may provide deeper insight into understanding the mechanism(s) of selectivity, ion transport, etc. in biological ion channels.     

Designing cyclopentapeptide inhibitor as potential antiviral drug for dengue virus ns5 methyltransferase

NS5 methyltransferase (Mtase) has a crucial role in the replication of dengue virus. There are two active sites on NS5 Mtase i.e., SAM and RNA-cap binding sites. Inhibition of the NS5 Mtase activity is expected to prevent the propagation of dengue virus. This study was conducted to design cyclic peptide ligands as enzyme inhibitors of dengue virus NS5 Mtase through computational approach. Cyclopentapeptides were designed as ligand of SAM binding site as much as 1635 and 736 cyclopentpeptides were designed as ligand of RNA-cap binding site. Interaction between ligand and NS5 Mtase has been conducted on the Docking simulation. The result shows that cyclopentapeptide CTWYC was the best peptide candidate on SAM binding site, with estimated free binding energy -30.72 kca/mol. Cyclopentapeptide CYEFC was the best peptide on RNA-cap binding site with estimated free binding energy -22.89 kcal/mol. Both peptides did not have tendency toward toxicity properties. So it is expected that both CTWYC and CYEFC ligands could be used as a potential antiviral drug candidates, which can inhibit the SAM and RNA-cap binding sites of dengue virus NS5 Mtase.     

Cyclic and linear peptides derived from alpha-amylase inhibitory protein tendamistat

Tendamistat is a strong inhibitory protein of porcine pancreatic alpha-amylase (PPA) with a K(i) value of 0.2 nM. To develop potent alpha-amylase inhibitors, we synthesized six odd-length cyclic peptides (5-15 residues) and four even-length cyclic peptides (10 and 12 residues) having the inhibitory sequence of tendamistat. Their PPA inhibitory activities were evaluated, and, among them, the 11-residue cyclic peptide Ten(15-23) (K(i) = 0.27 microM) exhibited the strongest inhibitory activity (K(i) = 0.27-1.41 microM). To examine the effect of cyclic structure on PPA inhibition, ten linear peptides corresponding to the cyclic peptides were also synthesized, and their PPA inhibitory activities were evaluated (K(i) = 0.28-1.00 microM). Interestingly, the 11-residue linear peptide Ten(15-23) exhibited almost the same inhibitory activity (K(i) = 0.28 microM) as that of cyclic Ten(15-23). The results of a circular dichroism study indicated that stabilization of the beta-hairpin structure occurred only for cyclic Ten(15-23). Also, the results of proteolytic digestion experiments of the cyclic and linear Ten(15-23) peptides by trypsin and chymotrypsin suggested no differences in protease resistance between the cyclic and linear structures. Therefore, we demonstrated that both cyclic and linear peptides containing the inhibitory sequence of tendamistat exhibit potent PPA inhibitory activity.     

Design and synthesis of cyclic disulfide-bonded antibacterial peptides on the basis of the alpha helical domain of Tenecin 1, an insect defensin

We synthesized cyclic disulfide-bonded (i, i+4) peptides with various net positive charges (+2-+5) from linear peptides derived from the alpha helical domain of Tenecin 1, an insect defensin, and investigated the effect of the intradisulfide bridge (i, i+4) on hydrophobicity, secondary structure, leakage activity and binding activity for large unilamellar vesicles, antimicrobial activity, and hemolytic activity. Intradisulfide bridge formation of the peptides resulted in the increase of amphiphilicity and hydrophobicity. Cyclic forms of the peptides did not deeply penetrate into PG/PC (1:1, mole ratio) large unilamellar vesicles and had a decreased lipid membrane perturbation activity for PG/PC LUVs. When the peptides interacted with PG/CL (2:1, mole ratio) LUVs, cyclic peptides with a high net positive charge (+4-+5) showed similar binding affinities and leakage activities for vesicles to those of linear forms, whereas cyclic peptides with a low net positive charge (+2-+3) exhibited lower leakage activity than their linear forms. CD spectra indicate that the intradisulfide bridge (i, i+4) provided little conformational constraint to linear peptides in buffer solution but resulted in the decrease of alpha helicity of the peptides in lipid membrane mimic conditions. The cyclic peptide with the highest net positive charge had a similar antibacterial activity to that of the linear peptide, whereas the cyclic peptides with a low net positive charge (+3-+4) exhibited lower antibacterial activity than their linear forms. The cyclic peptides of an appropriate net charge showed more potent activities against some bacteria than those of linear forms under high salt conditions.     

Chain length dependent transition of 310- to α-helix of Boc-(Ala-Aib)n-OMe

An apolar synthetic octapeptide, Boc-(Ala-Aib)₄-OMe, was crystallized in the triclinic space group P1 with cell dimensions a = 11.558 Å, b = 11.643 Å, c = 9.650 Å, α = 120.220°, β = 107.000°, γ = 90.430°, V = 1055.889 ų, Z = 1, C₃₄H₆₀O₁₁N₈·H₂O. The calculated crystal density was 1.217 g/cm³ and the absorption coefficient ? was 6.1. All the intrahelical hydrogen bonds are of the 3₁₀ type, but the torsion angles, ? and ψ, of Ala(5) and Ala(7) deviate from the standard values. The distortion of the 3₁₀-helix at the C-terminal half is due to accommodation of the bulky Boc group of an adjacent peptide in the nacking. A water molecule is held between the N-terminal of one peptide and the C-terminal of the other. The oxygen atom of water forms hydrogen bonds with N (1) -H and N (2) -H, which are not involved in the intrahelical hydrogen bonds. The hydrogen atoms of water also formed hydrogen bonds with carbonyl oxygens of the adjacent peptide molecule. On the other hand, ¹H-nmr analysis revealed that the octapeptide took an α-helical structure in a CD₃CN solution. The longer peptides, Boc-(Ala-Aib)₆-OMe and Boc-(Ala-Aib)₈-OMe, were also shown to take an α-helical structure in a CD₃CN solution. An α-helical conformation of the hexadecapeptide in the solid state was suggested by x-ray analysis of the crystalline structure. Thus, the critical length for transition from the 3₁₀- to α-helix of Boc-(Ala-Aib)_n-OMe is 8. © 1993 John Wiley & Sons, Inc.     

Origin of low mammalian cell toxicity in a class of highly active antimicrobial amphipathic helical peptides

We recently described a novel antimicrobial peptide, RTA3, derived from the commensal organism Streptococcus mitis, with strong anti-Gram-negative activity, low salt sensitivity, and minimal mammalian cell toxicity in vitro and in vivo. This peptide conforms to the positively charged, amphipathic helical peptide motif, but has a positively charged amino acid (Arg-5) on the nonpolar face of the helical structure that is induced upon membrane binding. We surmised that disruption of the hydrophobic face with a positively charged residue plays a role in minimizing eukaryotic cell toxicity, and we tested this using a mutant with an R5L substitution. The greatly enhanced toxicity in the mutant peptide correlated with its ability to bind and adopt helical conformations upon interacting with neutral membranes; the wild type peptide RTA3 did not bind to neutral membranes (binding constant reduced by at least 1000-fold). Spectroscopic analysis indicates that disruption of the hydrophobic face of the parent peptide is accommodated in negatively charged membranes without partial peptide unfolding. These observations apply generally to amphipathic helical peptides of this class as we obtained similar results with a peptide and mutant pair (Chen, Y., Mant, C. T., Farmer, S. W., Hancock, R. E., Vasil, M. L., and Hodges, R. S. (2005) J. Biol. Chem. 280, 12316-12329) having similar structural properties. In contrast to previous interpretations, we demonstrate that these peptides simply do not bind well to membranes (like those of eukaryotes) with exclusively neutral lipids in their external bilayer leaflet. We highlight a significant role for tryptophan in promoting binding of amphipathic helical peptides to neutral bilayers, augmenting the arsenal of strategies to reduce mammalian toxicity in antimicrobial peptides.