Stable periplasmic secretion intermediate in the general secretory pathway of Escherichia coli.

The secretion of the Klebsiella oxytoca cell surface lipoprotein pullulanase involves translocation across the cytoplasmic and outer membranes of the Gram-negative bacterial cell envelope. A variant of pullulanase was created by fusing the signal peptide-encoding 5' region of the Escherichia coli gene for periplasmic MalE protein to the 3' end of the pulA gene encoding almost the entire mature part of pullulanase. When produced in E. coli carrying the malE-pulA gene fusion on a high copy number plasmid and the complete set of genes specifically required for pullulanase secretion on a second plasmid, the hybrid protein differed from wild-type pullulanase as follows: (i) it was not fatty-acylated; (ii) it was apparently processed by LepB signal peptidase rather than by LspA lipoprotein signal peptidase; (iii) it was released into the periplasm and was only slowly transported across the outer membrane, and (iv) it was released directly into the medium rather than via the usual surface-anchored intermediate. The hybrid protein was secreted more rapidly when malE-pulA was expressed from a low copy number plasmid. The two steps in the secretion pathway could be totally uncoupled by expressing first the malE-pulA gene fusion and then the cognate secretion genes. These results show that fatty-acylation of wild-type PulA is not essential for secretion but may improve its efficiency when large amounts of the protein are produced, that the two steps in secretion can occur quite independently and that the periplasmic intermediate can persist for long periods under certain circumstances.     

Export and secretion of the lipoprotein pullulanase by Klebsiella pneumoniae

Pullulanase, a secreted lipoprotein of Klebsiella pneumoniae, is initially localized to the outer face of the outer membrane, as shown by protease and substrate accessibility and by immunofluorescence tests. Freeze-thaw disruption of these cells released both membrane-associated and apparently soluble forms of pullulanase. Membrane-associated pullulanase co-fractionated with authentic outer membrane vesicles upon isopycnic sucrose-gradient centrifugation, whereas the quasi-soluble form had the same equilibrium density as inner membrane vesicles and extracellular pullulanase aggregates. The latter also contained outer membrane maltoporin, but were largely devoid of other membrane components including LPS and lipids. K. pneumoniae carrying multiple copies of the pullulanase structural gene (pulA) produced increased amounts of cell-associated and secreted pullulanase, but a large proportion of the enzyme was neither exposed on the cell surface nor released into the medium, even after prolonged incubation. This suggests that factors necessary for pullulanase secretion were saturated by the over-produced pullulanase. When pulA was expressed under lacZ promotor control, the pullulanase which was produced was not exposed on the cell surface at any time, suggesting that pullulanase secretion genes are not expressed constitutively, and raising the possibility that they, like pulA, may be part of the maltose regulon.     

Cloning and expression in Escherichia coli of the Klebsiella pneumoniae genes for production, surface localization and secretion of the lipoprotein pullulanase.

This article describes the reconstitution in Escherichia coli of a heterologous protein secretion system comprising a gene for an extracellular protein together with its cognate secretion genes. The protein concerned, pullulanase, is a secreted lipoprotein of the Gram-negative bacterium Klebsiella pneumoniae. It is initially localized to the cell surface before being specifically released into the medium. E. coli carrying the cloned pullulanase structural gene (pulA) produces pullulanase but does not expose or secrete it. Secretion genes were cloned together with pulA in an 18.8 kbp fragment of K. pneumoniae chromosomal DNA. E. coli carrying this fragment exhibited maltose-inducible production, exposition and specific secretion of pullulanase. Transposon mutagenesis showed that the secretion genes are located on both sides of pulA. Secretion genes located 5' to pulA were transcribed in the opposite orientation to pulA under the control of the previously identified, malT-regulated malX promoter. Thus these secretion genes are part of the maltose regulon and are therefore co-expressed with pulA. Transposon mutagenesis suggested that secretion genes located 3' of pulA are not co-transcribed with pulA, raising the possibility that some secretion functions are not maltose regulated.     

Secretion of the cell surface lipoprotein pullulanase in Escherichia coli. Cooperation or competition between the specific secretion pathway and the lipoprotein sorting pathway.

The fatty acid-acylated enzyme pullulanase is normally found in either of two locations in Escherichia coli, depending on whether or not the producing strains also express the genes specifically required for the second step in pullulanase secretion. When they are expressed, the enzyme is localized to the cell surface, while in their absence, it is directed to an unidentified location in the cell envelope which, upon lysis, forms vesicles whose density is intermediate between those of outer and cytoplasmic membrane vesicles. In order to test the role of the putative lipoprotein sorting signal, Asp2, in pullulanase sorting and secretion, the structural gene (pulA) was subjected to site-directed mutagenesis. Replacement of the Asp2 residue by Asn, Glu, or Ser caused the enzyme to fractionate with outer membrane-derived vesicles rather than with intermediate density vesicles from E. coli cells devoid of pullulanase secretion genes. A pronounced secretion defect was observed in a two-step secretion assay in which the first (sec gene-dependent) and second (pul gene-dependent) secretion steps were uncoupled. We propose that the Asp residue increases the efficiency of pullulanase secretion by allowing the enzyme to be initially sorted to a region of the cell envelope wherein most of the pullulase-specific secretion factors are located.     

Klebsiella pneumoniae pulS gene encodes an outer membrane lipoprotein required for pullulanase secretion.

The product of the Klebsiella pneumoniae gene pulS, which is located downstream from the pullulanase structural gene (pulA), is essential for the cell surface localization and extracellular release of pullulanase in Escherichia coli K-12. pulS is transcribed in the opposite direction to pulA, from which it is separated by a region of 624 nucleotides. Although this latter region contains a new component of the maltose regulon, pulB, which is transcribed from the pulA promoter, it is not required for pullulanase synthesis or secretion. Unlike pulA and all other pullulanase secretion genes characterized so far, the expression of pulS is not induced by growth in the presence of maltose and is unaffected by mutations in the maltose regulator gene malT. The pulS gene product was identified as a ca. 12-kilodalton outer membrane lipoprotein. The characterization of PulS brings to three the number of identified proteins which are known to be required for pullulanase secretion in addition to the components of the signal sequence-dependent general protein export pathway.     

Pullulanase type I from Fervidobacterium pennavorans Ven5: cloning, sequencing, and expression of the gene and biochemical characterization of the recombinant enzyme

The gene encoding the type I pullulanase from the extremely thermophilic anaerobic bacterium Fervidobacterium pennavorans Ven5 was cloned and sequenced in Escherichia coli. The pulA gene from F. pennavorans Ven5 had 50.1% pairwise amino acid identity with pulA from the anaerobic hyperthermophile Thermotoga maritima and contained the four regions conserved among all amylolytic enzymes. The pullulanase gene (pulA) encodes a protein of 849 amino acids with a 28-residue signal peptide. The pulA gene was subcloned without its signal sequence and overexpressed in E. coli under the control of the trc promoter. This clone, E. coli FD748, produced two proteins (93 and 83 kDa) with pullulanase activity. A second start site, identified 118 amino acids downstream from the ATG start site, with a Shine-Dalgarno-like sequence (GGAGG) and TTG translation initiation codon was mutated to produce only the 93-kDa protein. The recombinant purified pullulanases (rPulAs) were optimally active at pH 6 and 80 degrees C and had a half-life of 2 h at 80 degrees C. The rPulAs hydrolyzed alpha-1,6 glycosidic linkages of pullulan, starch, amylopectin, glycogen, alpha-beta-limited dextrin. Interestingly, amylose, which contains only alpha-1,4 glycosidic linkages, was not hydrolyzed by rPulAs. According to these results, the enzyme is classified as a debranching enzyme, pullulanase type I. The extraordinary high substrate specificity of rPulA together with its thermal stability makes this enzyme a good candidate for biotechnological applications in the starch-processing industry.     

Molecular cloning and biochemical characterization of a heat-stable type I pullulanase from Thermotoga neapolitana

The gene encoding a type I pullulanase from the hyperthermophilic anaerobic bacterium Thermotoga neapolitana (pulA) was cloned in Escherichia coli and sequenced. The pulA gene from T. neapolitana showed 91.5% pairwise amino acid identity with pulA from Thermotoga maritima and contained the four regions conserved in all amylolytic enzymes. pulA encodes a protein of 843 amino acids with a 19-residue signal peptide. The pulA gene was subcloned and overexpressed in E. coli under the control of the T7 promoter. The purified recombinant enzyme (rPulA) produced a 93-kDa protein with pullulanase activity. rPulA was optimally active at pH 5-7 and 80°C and had a half-life of 88 min at 80°C. rPulA hydrolyzed pullulan, producing maltotriose, and hydrolytic activities were also detected with amylopectin, starch, and glycogen, but not with amylose. This substrate specificity is typical of a type I pullulanase. Thin layer chromatography of the reaction products in the reaction with pullulan and aesculin showed that the enzyme had transglycosylation activity. Analysis of the transfer product using NMR and isoamylase treatment revealed it to be α-maltotriosyl-(1,6)-aesculin, suggesting that the enzyme transferred the maltotriosyl residue of pullulan to aesculin by forming α-1,6-glucosidic linkages. Our findings suggest that the pullulanase from T. neapolitana is the first thermostable type I pullulanase which has α-1,6-transferring activity.     

A gene fusion approach to the study of pullulanase export and secretion in Eschenchia coli

A series of fusions between the gene for the Klebsiella pneumoniae secreted lipoprotein pullulanase (pulA) and the genes for cytoplasmic beta-galactosidase (lacZ) or periplasmic alkaline phosphatase (phoA) were created by transposon mutagenesis using mini-MudII1681 or TnphoA, respectively. The hybrid genes were expressed in Escherichia coli K-12 with or without the K. pneumoniae genes that promote pullulanase secretion in E. coli. We characterized seven different pulA-lacZ gene fusions encoding hybrid polypeptides containing from 14 to c. 1060 residues of pro-pullulanase. All but the smallest hybrid were fatty acylated and were toxic to producing cells, causing the accumulation of precursors of other exported proteins. Four different pulA-phoA gene fusions encoded hybrids with alkaline phosphatase activity. All four hybrids were fatty acylated, but were not toxic. Although the hybrids were apparently membrane-associated, they were not secreted into the medium either by E. coli carrying pullulanase secretion genes or by K. pneumoniae. Immunofluorescence tests indicated that the pullulanase secretion genes promoted the localization of one of these hybrids to the outer face of the E. coli outer membrane, which may have important implications for the design of live vaccine strains and of immobilized enzymes.     

Analysis of the subcellular location of pullulanase produced by Escherichia coli carrying the pulA gene from Klebsiella pneumoniae strain UNF5023

Three different techniques, protease accessibility, cell fractionation and in situ immunocytochemistry, were used to study the location of the lipoprotein pullulanase produced by Escherichia coli K12 carrying the cloned pullulanase structural gene (pulA) from Klebsiella pneumoniae, with or without the K. pneumoniae genes required to transport pullulanase to the cell surface (secretion-competent and secretion-incompetent, respectively). Pullulanase produced by secretion-competent strains could be slowly but quantitatively released into the medium by growing the cells in medium containing pronase. The released pullulanase lacked the N-terminal fatty-acylated cysteine residue (and probably also a short N-terminal segment of the pullulanase polypeptide), confirming that the N-terminus is the sole membrane anchor in the protein. Pullulanase produced by secretion-incompetent strains was not affected by proteases, confirming that it is not exposed on the cell surface. Pullulanase cofractionated with both outer and inner membrane vesicles upon isopycnic sucrose gradient centrifugation, irrespective of the secretion competence of the strain. Examination by electronmicroscopy of vesicles labelled with antipullulanase serum and protein A-gold confirmed that pullulanase was associated with both types of vesicles. When thin-sectioned cells were examined by the same technique, pullulanase was found to be located mainly on the cell surface of the secretion-competent cells and mainly in the proximity of the inner membrane in the secretion-incompetent cells. Thus, while the results from three independent techniques (substrate accessibility, protease accessibility and in situ immunocytochemistry) show that pullulanase is transported to the cell surface of secretion-competent cells, this could not be confirmed by cell-fractionation techniques. Possible explanations for this discrepancy are discussed.     

Cloning of the pullulanase gene and overproduction of pullulanase in Escherichia coli and Klebsiella aerogenes.

The pullulanase gene (pul) of Klebsiella aerogenes was cloned into a pBR322 vector in Escherichia coli. Deletion analysis of the recombinant plasmid showed that the pul coding sequence, probably with the regulator gene, was located entirely within a 4.2-kilobase segment derived from the chromosomal DNA of K. aerogenes. E. coli cells carrying the recombinant plasmids produced about three- to sevenfold more pullulanase than did the wild-type strain of K. aerogenes W70. When the cloned cells of E. coli were grown with pullulan or maltose, most pullulanase was produced intracellularly, whereas K. aerogenes produced pullulanase extracellularly. Transfer of the plasmid containing the pul gene into K. aerogenes W70 resulted in about a 20- to 40-fold increase in total production of pullulanase, and the intracellular enzyme level was about 100- to 150-fold higher than that of the parent strain W70. The high level of pullulanase activity in K. aerogenes cells carrying the recombinant plasmid was maintained for at least 2 weeks.     

Cloning of the pullulanase gene and overproduction of pullulanase in Escherichia coli and Klebsiella aerogenes

The pullulanase gene (pul) of Klebsiella aerogenes was cloned into a pBR322 vector in Escherichia coli. Deletion analysis of the recombinant plasmid showed that the pul coding sequence, probably with the regulator gene, was located entirely within a 4.2-kilobase segment derived from the chromosomal DNA of K. aerogenes. E. coli cells carrying the recombinant plasmids produced about three- to sevenfold more pullulanase than did the wild-type strain of K. aerogenes W70. When the cloned cells of E. coli were grown with pullulan or maltose, most pullulanase was produced intracellularly, whereas K. aerogenes produced pullulanase extracellularly. Transfer of the plasmid containing the pul gene into K. aerogenes W70 resulted in about a 20- to 40-fold increase in total production of pullulanase, and the intracellular enzyme level was about 100- to 150-fold higher than that of the parent strain W70. The high level of pullulanase activity in K. aerogenes cells carrying the recombinant plasmid was maintained for at least 2 weeks.     

Cloning and expression of the thermostable pullulanase gene from Thermus sp. strain AMD-33 in Escherichia coli

Abstract The gene coding for a thermostable pullulanase from a thermophile, Thermus sp. strain AMD-33, was cloned in Escherichia coli using pDR540 as a vector. A restriction map was determined for the plasmid pTPS131 which contained the fragment carrying the pullulanase gene. DNA-DNA hybridisation analysis showed that the DNA fragment contained the gene from Thermus sp. strain AMD-33. The strain of E. coli harbouring the plasmid pTPS131 produced most of the pullulanase protein cellularly, whereas Thermus sp. strain AMD-33 produced pullulanase extracellularly. Comparative studies of the enzyme from the thermophile and the plasmid-encoded enzyme in E. coli demonstrated that the optimum temperature and pH of the enzymes were closely similar.     

The normally periplasmic enzyme β-lactamase is specifically and efficiently translocated through the Escherichia coli outer membrane when it is fused to the cell-surface enzyme pullulanase

Hybrid proteins were constructed in which C-terminal regions of the bacterial cell surface and extracellular protein pullulanase were replaced by the mature forms of the normally periplasmic Escherichia coli proteins beta-lactamase or alkaline phosphatase. In E. coli strains expressing all pullulanase secretion genes, pullulanase-beta-lactamase hybrid protein molecules containing an N-terminal 834-amino-acid pullulanase segment were efficiently and completely transported to the cell surface. This hybrid protein remained temporarily anchored to the cell surface, presumably via fatty acids attached to the N-terminal cysteine of the pullulanase segment, and was subsequently specifically released into the medium in a manner indistinguishable from that of pullulanase itself. These results suggest that the C-terminal extremity of pullulanase lacks signal(s) required for export to the cell surface. When beta-lactamase was replaced by alkaline phosphatase, the resulting hybrid also became exposed at the cell surface, but exposition was less efficient and specific release into the medium was not observed. We conclude that proteins that do not normally cross the outer membrane can be induced to do so when fused to a permissive site near the C-terminus of pullulanase.     

Extracellular pullulanase of Klebsiella pneumoniae is a lipoprotein.

Pullulanase is a starch-debranching enzyme produced by the gram-negative bacterium Klebsiella pneumoniae. In this organism, the enzyme is first exported to the outer membrane and is subsequently released into the growth medium. Evidence reported here indicates that pullulanase is a lipoprotein. It is apparently synthesized as a precursor with a 19-residue-long signal sequence and modified by the covalent attachment of palmitate to the cysteine residue which becomes the amino terminus after cleavage of the signal sequence. In this respect, pullulanase is similar to some penicillinases produced by gram-positive bacteria which are initially exported to the cell surface and subsequently released into the medium. However, pullulanase and the penicillinases differ in one important aspect, namely, that the extracellular pullulanase still carries the covalently attached fatty acyls, whereas extracellular penicillinases lack the modified amino-terminal cysteine together with a limited number of other residues from the amino terminus.     

地衣芽孢杆菌普鲁兰酶编码基因的鉴定

对地衣芽孢杆菌基因组序列分析显示。其中标注为amyX的基因可能编码普鲁兰酶。以PCR方法,从地衣芽孢杆菌染色体DNA中扩增出amyX基因蛋白编码区,插入大肠杆菌表达载体pET28aT7启动予下游。含重组质粒的大肠杆菌BL21（DE3）在IPTG诱导下表达出有活性的普鲁兰酶。酶学性质初步分析表明,重组普鲁兰酶最适反应温度为40℃,最适pH值为6．0。     

Molecular characterization of pulA and its product, pullulanase, a secreted enzyme of Klebsielia pneumoniae UNF5023

The determined nucleotide sequence of the Klebsiella pneumoniae UNF5023 gene pulA comprises a single open reading frame coding for a 1090-residue precursor of the secreted protein pullulanase. The predicted sequence of this protein is highly homologous to that of pullulanase of Klebsiella aerogenes strain W70. However, the UNF5023 pullulanase lacks a collagen-like sequence present at the N-terminus of the mature W70 enzyme and differs further from the W70 pullulanase around residue 300 and at the C-terminus. Pullulanases with or without the collagen-like sequence could not be separated by gel electrophoresis under denaturing or non-denaturing conditions, and were unaffected by collagenase. A large central domain which is highly conserved in both UNF5023 and W70 polypeptides contains eight short sequences that are also found in amylases and iso-amylases. Linker mutations in the region of the UNF5023 pulA gene coding for this domain abolished catalytic activity without affecting transport of the polypeptide across the outer membrane. Hybrid proteins comprising at least the amino-terminal 656 residues of prepullulanase fused to alkaline phosphatase were partially localized to the cell surface, as judged by their accessibility to anti-pullulanase serum in immuno-fluorescence tests. On the basis of these results, we tentatively propose that secretion signals required for recognition and translocation across the outer membrane via the pullulanase-specific extension of the secretion pathway are located near the N-terminus of the pullulanase polypeptide.     

Extracellular release of protease III (ptr) by Escherichia coli K12

Escherichia coli strains carrying the protease III structural gene (ptr) on a plasmid secreted the protein into the growth medium. Plasmid-encoded beta-lactamase and chloramphenicol acetyl transferase, which served as periplasmic and cytoplasmic markers during cell fractionation, were not released into the growth medium. There appeared to be some strain dependence on the proficiency of the secretion system. Protease III was not detectably processed upon export through the outer cell membrane.     

Secretion into the culture medium of a foreign gene product from Escherichia coli: use of the ompF gene for secretion of human beta-endorphin.

The ompF gene codes for a major outer membrane protein of Escherichia coli. A plasmid was constructed in which the structural gene for human beta-endorphin is preceded by the upstream region of the ompF gene consisting of the promoter region and the coding regions for the signal peptide and the N terminus of the OmpF protein. When the plasmid was introduced into E. coli N99, and OmpF-beta-endorphin fused peptide was synthesized and secreted into the culture medium through both the cytoplasmic and outer membranes. The OmpF signal peptide was cleaved correctly during the secretion, indicating that the export of the fused protein across the cytoplasmic membrane was dependent on the signal peptide. The secretion into the culture medium was apparently selective. Neither beta-lactamase nor alkaline phosphatase (both are periplasmic proteins) appeared in the culture medium in significant amounts. The mode of passage of the fused peptide across the outer membrane is discussed.     

Secretion of periplasmic PhoA protein during its supersynthesis into the medium using outer membrane vesicles. Features of chemical composition of the vesicles and membranes of Escherichia coli secreting cells

E. coli K12802 cells transformed by multicopy plasmid with phoA gene acquire the ability to oversynthesize alkaline phosphatase, secrete it into the cultural medium, and accumulate the precursor of this enzyme. The dynamics of enzyme production and secretion as well as cytomorphological changes revealed the existence of a mechanism of selective enzyme secretion into the medium. It is characterized by a decrease of enzyme specific activity in periplasm and its increase in cultural medium, appearance of numerous local zones of adhesion of cytoplasmic and outer membranes, formation of large extracellular outer membrane vesicles containing PhoA protein on the cell poles, and their release into the medium. We isolated the vesicles and found that they contain PhoA (in dominating quantity), several other periplasmic proteins, and matrix proteins of outer membranes. By their phospholipid and protein composition, they correspond to the fraction of outer membranes which have the largest density and sedimentation rate and, apparently, contain no lipoprotein.