Thermo-inducible expression of cloned early genes of bacteriophage Mu.

An EcoRI fragment, containing approx. 5100 base pairs (bp) of the immunity-end of bacteriophage Mu, was inserted into the multicopy plasmid pMB9 by in vitro recombination. The expression of early Mu genes, located on the cloned fragment, is thermo-inducible because of the presence of the ts mutation in gene c. The isolation of a transformant harbouring the recombinant plasmid, pGP1, was possible only when expression of Mu genes was prevented. pGP1 can be maintained at 28 degrees C at high copy number, but at 42 degrees C the pGP1 containing cells are killed due to the expression of the kil gene of Mu. The following Mu genes are present on pGP1: the ner gene, the integration and replication genes A and B, the cim gene, and the kil gene. pGP1 containing cells do not show Gam and Sot activity at 42 degrees C, therefore the leftmost EcoRI site on the Mu DNA is located between genes kil and gam or sot, or within the gam or sot gene.     

Cloning of the replication gene O of E. coli bacteriophage lambda and its expression under the control of the lac promoter

The expression of the replication gene O of bacteriophage lambda was put under the control of the lac promoter-operator region integrated into the pBR322 cloning vehicle. The new plasmid pKK104 was introduced into minicells and the O gene induced by isopropyl-beta-thiogalactoside (IPTG). The O protein could be identified as a major component in extracts from these cells, in association with the cell membrane fractions. The molecular weight of the O protein in SDS gels is about 33 000, and it is metabolically unstable but apparently stable upon isolation as a membrane-associated fraction.     

A plasmid cloning system utilizing replication and packaging functions of the filamentous bacteriophage fd

DNA cloning vectors were developed which utilize the replication origin (ori) of bacteriophage fd for their propagation. These vectors depend on the expression of viral gene 2 that was inserted into phage lambda, which in turn was integrated into the host genome. The constitutive expression of gene 2 in the host cells is sufficient for the propagation of at least 100 pfd plasmids per cell. In addition to the fd ori, the pfd vectors carry various antibiotic-resistance genes and unique restriction sites. Some of these vectors have no homologies to commonly used pBR plasmids or to lambda DNA. The nucleotide sequence of the vectors can be deduced from published sequences. Large DNA inserts can be stably propagated in pfd vectors; these are more stable than similar DNA fragments cloned in intact genomes of filamentous bacteriophage. Inclusion of phage sequences required for efficient phage packaging and infection with a helper phage resulted in formation of phage particles containing single-stranded plasmid genomes. Growth at 42 degrees C without selective pressure results in loss of pfd plasmids.     

Cloning and endonuclease restriction analysis of argF and of the control region of the argECBH bipolar operon in Escherichia coli.

A 1.8 kb DNA fragment, liberated by endonuclease HindIII, contains the control region of the argECBH bipolar operon near one end and the weak secondary promoter of argH at the other extremity; it has been cloned in plasmid pBR322. The same plasmid vector has been used to clone the argF gene liberated from the chromosome by endonuclease BamHI. Restriction patterns for the two hybrid plasmids have been determined, using enzymes AluI, BglI, EcoRI, HaeIII, HincII, HindIII, HpaI and II, PstI and SalI. Two AluI sites situated on either side of and close to a HincII target delineate two short fragments covering the whole of the argECBH control region. The argF control elements are located in a region accessible to further dissection by BamHI, EcoRI, PstI and HindIII. Carriers of the argF plasmid produce extremely high amounts of ornithine carbamoyltransferase, a feature useful for purification of this enzyme.     

Construction and characterization of new cloning vehicles. VII. Construction of plasmid pBR327par, a completely sequenced, stable derivative of pBR327 containing the par locus of pSC101

In vitro recombinant DNA experiments, using plasmid pBR327 and a DNA fragment derived from plasmid pSC101 containing the par region, resulted in the construction of plasmid pBR327par. This new cloning vehicle has all the cloning properties of the parental plasmid, and is more stable than pBR327. Since the nucleotide sequence of the par region has been determined, this new vector is completely characterized. Some features of the sequence with possible functional significance are discussed.     

Molecular cloning and expression of a Bacillus subtilis β-glucanase gene in Escherichia coli

A Bacillus subtilis gene coding for an endo-β-1,3-1,4-glucanase has been transferred to Escherichia coli by molecular cloning using bacteriophage λ and plasmid vectors. The gene is contained within a 1.6-kb EcoRI-PvuI DNA fragment and directs the synthesis in E. coli of a β-glucanase which specifically degrades barley glucan and lichenan. A novel dye-staining method has been developed to detect β-glucanase activity in colonies on agar plates.     

Expression of the bacteriophage P1 cin recombinase gene from its own and heterologous promoters

The cin recombinase of bacteriophage P1, a protein that catalyses site-specific DNA inversions, has been identified and its structural gene has been cloned under the control of different promoters. One of the DNA sequences used for the site-specific recombination, cixL, overlaps with the 3' end of the gene, but we show that the presence of this site does not affect cin gene expression from strong promoters. To assay cin activity we have constructed plasmids that carry antibiotic resistance genes within the invertible segment that are transcribed from promoters outside the segment. DNA inversion switches on or off genes for chloramphenicol or kanamycin resistance. These tester plasmids are used to study cin-mediated DNA inversion both in vivo and in vitro.     

Expression of the phage λ recombination genes exo and bet under lacPO control on a multi-copy plasmid

The bacteriophage λ genes exo and bet, whose products (λ exonuclease and β protein, respectively; Red phenotype) mediate homologous recombination of λ phages, have been cloned under lacPOlacI^q control on multi-copy plasmids. Induction of recA3 cells harboring these plasmids with isopropylthiogalactoside (IPTG) resulted in λ exonuclease levels (assayed in vitro) that were proportional to the time of induction (for at least 4 h); recombination of λ Red^? phages in vivo was similarly inducible. Only one out of 25 bet^Δ plasmids (constructed by a variety of in vitro techniques) expressed λ exonuclease, a result consistent with the polarity of several known phage bet mutations. A general method for transferring phage exo and bet mutations to plasmids was devised and plasmids bearing polar (bet3) and nonpolar (bet113) mutations were constructed. Mutant derivatives of the plasmid showed the same complementation pattern as analogous phage red mutants. When λbet3 phages (Exo^?Bet^?) infected IPTG-induced recA3 bacteria containing exo⁺bet⁺ plasmids, recombination frequencies were no more than twice those typical for infection of plasmid-free recA3 cells with exo⁺bet⁺ phages, even in the case of IPTG induction sufficient to elevate the production of λ exonuclease about 100-fold. Even when plasmid induction was delayed till as late as 50 min after infection, recombination was significant. Preliminary experiments suggest that these plasmids encode a polypeptide with Gam activity that corresponds to the 98-amino acid “shorter” open reading frame assigned to gam by Sanger et al.     

Cloning of a plasmid region specifying the N transfer system of bacterial conjugation in Escherichia coli

HindIII restriction sites were created artificially by the insertion of the transposon Tn.5 into the IncN plasmid pCU1 near a presumptive end of its conjugal transfer region (tra). This allowed cloning of an entire and continuous 19.4-kb region of this plasmid that specifies the N transfer system. The cloning vector was the nonconjugative plasmid pACYC184. The recombinant plasmid was as efficient in transfer as the parental N plasmid. Other clones and deletions extending into the tra region allowed localization of a 11.2-kb segment of this region that determines sensitivity to the N-specific bacteriophages IKe and PRD1. It could also be concluded that the ability of pCU1 to promote the killing of Klebsiella pneumoniae requires a 2-kb region that is not part of, but adjacent to the tra region.     

Homology between the photoreactivation genes of Saccharomyces cerevisiae and Escherichia coli

A cloned fragment of Saccharomyces cerevisiae chromosomal DNA carrying the photoreactivation gene (PHR) has been sequenced. The fragment contains a 1695-bp intronless open reading frame (ORF) coding for a polypeptide of 564 amino acids (aa). The phr gene of Escherichia coli was also sequenced, and the sequence is in agreement with the published data. The yeast PHR gene has a G + C content of 36.2%, whereas 53.7% was found for the E. coli gene. Despite the difference in G + C content there is a 35% homology between the deduced aa sequences. This homology suggests that both genes have originated from a common ancestral gene.     

An IS15 insertion generates an eight-base-pair duplication of the target DNA

In plasmid pIP1088 the transposable module IS15 is inserted at nucleotide position 1,430 of the vector plasmid pBR322. We have sequenced the termini of the IS15 element, which consists of two perfect inverted repeat sequences, 14 bp long. The sequence is 5′-GGCACTGTTGCAAA… TTTGCAACAGTGCC-3′. The integration event results in the duplication of 8 bp of target DNA.     

Identification of bacterial clones encoding bovine caseins by direct immunological screening of the cDNA library

A sensitive immunoassay was used to identify recombinant plasmids carrying cDNA fragments of bovine caseins in the cDNA library from bovine mammary gland mRNA. Colonies grown on nitrocellulose filters were lysed in situ and proteins from the lysates were blotted onto CNBr-activated cellulose filter paper. Antigens covalently bound to CNBr-activated paper or bound to nitrocellulose filters were detected by reaction with antiserum to caseins, followed by ¹²⁵I-labelled Staphylococcus aureus protein A and autoradiography. Six clones were found positive among 5400 of the cDNA library: 3-A1, 3-B2, 3-B5, 3-H7, 2-A5 and 2-C9. The molecular weights of chimeric pre-β-lactamase: casein proteins synthesized in Escherichia coli were estimated by immunoblotting. Colony hybridization and nucleotide sequence analysis showed that clone 3-B5 contained a cDNA fragment of bovine χ-casein, clone 3-H7 contained a cDNA fragment of β-casein, while clones 2-A5 and 2-C9 carried cDNA fragments of α_si-casein.     

Cloning of aroG, the gene coding for phospho-2-keto-3-deoxy-heptonate aldolase(phe), in Escherichia coli K-12, and subcloning of the aroG promoter and operator in a promoter-detecting plasmid

Defective transducing phages carrying aroG, the structural gene for phenylalanine (phe)-inhibitable phospho-2-keto-heptonate aldolase (EC 4.1.2.15; previously known as 3-deoxy-D-arabinoheptulosonate-7-phosphate synthetase[phe]), have been isolated, and DNA from two of these phages has been used to construct a restriction map of the region from att lambda to aroG. A 7.6-kb PstI-HindIII fragment from one of these phages was cloned into pBR322 and shown to contain aroG. The location of aroG within the 7.6 kb was established by subcloning and Tn3 transpositional mutagenesis. A fragment carrying the aroG promoter and operator has been cloned into a high copy number promoter-cloning vector (pMC489), and the resulting aroGpo-LacZ' (alpha) fusion subcloned in a low copy number vector. Strains with this fusion on the low copy number vector exhibit negative regulation of beta-galactosidase expression by both phenylalanine and tryptophan and positive regulation by tyrosine in a tyrR+ background.     

Effects of alterations in the translation control region on bacterial gene expression: use of cat gene constructs transcribed from the lac promoter as a model system

The region controlling translation of the cat gene, which codes for chloramphenicol acetyltransferase, has been varied structurally in a series of plasmids that place the gene under control of the lac promoter. These plasmid constructs have enabled study of the structural features that affect the efficiency of mRNA translation. Altering the potential for secondary structure formation within the translation control region caused a tenfold variation in the synthesis of CAT enzyme, whereas varying the distance between the Shine-Dalgarno sequence (SD) and the translation start codon from 7 to 13 bases did not significantly affect the yield of CAT. If the SD was situated in a region of mRNA that is capable of base pairing, the efficiency of translation was decreased; however, the translation start codon, AUG, can initiate translation efficiently even when located in a segment capable of duplex formation. Overlapping of the cat translation control region by translation initiated upstream markedly affected initiation of translation within the cat gene: out-of-frame overlapping translation reduced CAT production by 90%; in-frame overlapping translation prevented detectable initiation of protein synthesis at the cat gene translation start codon, and yielded only fusion proteins. The enzymatic activity of such proteins was influenced by the length of the adventitious peptide segment added to the amino-terminus of the CAT polypeptide.