Filamentous fungal characterizations by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Matrix‐assisted laser desorption/ionization time‐of‐flight intact cell mass spectrometry (MALDI‐TOF ICMS) is coming of age for the identification and characterization of fungi. The procedure has been used extensively with bacteria. UV‐absorbing matrices function as energy mediators that transfer the absorbed photoenergy from an irradiation source to the surrounding sample molecules, resulting in minimum fragmentation. A surprisingly high number of fungal groups have been studied: (i) the terverticillate penicillia, (ii) aflatoxigenic, black and other aspergilli, (iii) Fusarium, (iv) Trichoderma, (iv) wood rotting fungi (e.g. Serpula lacrymans) and (v) dermatophytes. The technique has been suggested for optimizing quality control of fungal Chinese medicines (e.g. Cordyceps). MALDI‐TOF ICMS offers advantages over PCR. The method is now used in taxonomic assessments (e.g. Trichoderma) as distinct from only strain characterization. Low and high molecular mass natural products (e.g. peptaibols) can be analysed. The procedure is rapid and requires minimal pretreatment. However, issues of reproducibility need to be addressed further in terms of strains of species tested and between run variability. More studies into the capabilities of MALDI‐TOF ICMS to identify fungi are required.     

Evaluation of VITEK matrix‐assisted laser desorption ionization–time of flight mass spectrometry for identification of anaerobes

Rapid and adequate identification of anaerobic bacterial species still presents a challenge for most diagnostic laboratories, hindering the selection of appropriate therapy. In this study, the identification capacity of 16S rRNA sequence analysis, VITEK 2 (BioMérieux, Lyon, France) compact analysis and VITEK MS‐mediated identification for anaerobic bacterial species was compared. Eighty‐five anaerobic bacterial isolates from 11 provinces in China belonging to 14 genera were identified by these three methods. Differences in identification between these three methods were compared. Consistent identification results were obtained for 54 (54/85, 63.5%) isolates by all three methods, the most discordant results being concentrated in Clostridium XI (n = 8) and Bacteroides fragilis (n = 9) clusters. Using the VITEK MS system, 74 (74/90, 82.2%) isolates were identified as single species consistent with 16S rRNA sequence analysis, which was significantly better than the results obtained with VITEK 2 Compact (P < 0.01). Misidentifications by the Vitek 2 Compact and Vitek MS systems were mainly observed in the Clostridium XI (n = 8)and B. fragilis clusters (n = 9). VITEK MS identified anaerobic bacteria even after they had been exposed to oxygen for a week. Identification by the Vitek MS system was more consistent with 16S rRNA sequence analysis than identification by Vitek 2 Compact. Continuous expansion of the VITEK MS database with rare described anaerobic species is warranted to improve both the efficiency and accuracy of VITEK MS identification in routine diagnostic microbiology.     

Evaluation of matrix-assisted laser desorption/ionization time of flight mass spectrometry for characterization of Culicoides nubeculosus biting midges

Matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) has shown promise in species identification of insect species. We evaluated its potential to consistently characterize laboratory-reared biting midges of the species Culicoides nubeculosus (Meigen) (Diptera: Ceratopogonidae). Twenty-one reproducible potential biomarker masses for C. nubeculosus were identified under different experimental treatments. These treatments included the homogenization of insects in either water or known concentrations of formic acid. The biomarker masses were present independent of age, gender and different periods of storage of individuals in 70% ethanol (a standard preservation method). It was found that the presence of blood in females reduced the intensity of the MALDI-TOF pattern, necessitating the removal of the abdomen before analysis. The protein profiles of a related non-biting midge, Forcipomyia sp. (Diptera: Ceratopogonidae), and of Aedes japonicus japonicus (Theobald) (Diptera: Culicidae) mosquitoes were also examined and were distinctly different. These findings provide preliminary data to optimize future studies in differentiation of species within the Culicoides genus using MALDI-TOF MS which is a rapid, simple, reliable and cost-effective technique.     

Culture conditions and sample preparation methods affect spectrum quality and reproducibility during profiling of Staphylococcus aureus with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) has emerged as a promising tool to rapidly characterize Staphylococcus aureus. Different protocols have been employed, but effects of experimental factors, such as culture condition and sample preparation, on spectrum quality and reproducibility have not been rigorously examined. We applied MALDI‐TOF MS to characterize a model system consisting of five methicillin‐sensitive (MSSA) and five methicillin‐resistant S. aureus isolates (MRSA) under two culture conditions (agar and broth) and using two sample preparation methods [intact cell method and protein extraction method (PEM)]. The effects of these treatments on spectrum quality and reproducibility were quantified. PEM facilitated increases in the number of peaks and mass range width. Broth cultures further improved spectrum quality in terms of increasing the number of peaks. In addition, PEM increased reproducibility in samples prepared using identical culture conditions. MALDI imaging data suggested that the improvement in reproducibility may result from a more homogeneous distribution of sample associated with the broth/PEM treatment. Broth/PEM treatment also yielded the highest rate (96%) of correct classification for MRSA. Taken together, these results suggest that broth/PEM maximizes the performance of MALDI‐TOF MS to characterize S. aureus.

Significance and Impact of the Study

Two culture conditions (agar or broth) and two sample preparation methods (intact cell or protein extraction) were evaluated for their effects on profiling of Staphylococcus aureus using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). Results indicated that MALDI‐enabled profiling of S. aureus is most effective when cultures are grown in broth and processed using a protein extraction‐based approach. These findings should enhance future efforts to maximize the performance of this approach to characterize strains of S. aureus.     

Matrix‐assisted laser desorption/ionization mass spectrometry imaging: a powerful tool for probing the molecular topology of plant cutin polymer

The cutin polymers of different fruit cuticles (tomato, apple, nectarine) were examined using matrix‐assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) after in situ release of the lipid monomers by alkaline hydrolysis. The mass spectra were acquired from each coordinate with a lateral spatial resolution of approximately 100 μm. Specific monomers were released at their original location in the tissue, suggesting that post‐hydrolysis diffusion can be neglected. Relative quantification of the species was achieved by introducing an internal standard, and the collection of data was subjected to non‐supervised and supervised statistical treatments. The molecular images obtained showed a specific distribution of ions that could unambiguously be ascribed to cutinized and suberized regions observed at the surface of fruit cuticles, thus demonstrating that the method is able to probe some structural changes that affect hydrophobic cuticle polymers. Subsequent chemical assignment of the differentiating ions was performed, and all of these ions could be matched to cutin and suberin molecular markers. Therefore, this MALDI‐MSI procedure provides a powerful tool for probing the surface heterogeneity of plant lipid polymers. This method should facilitate rapid investigation of the relationships between cuticle phenotypes and the structure of cutin within a large population of mutants.     

Analysis of human blood serum using the off-line coupling of capillary isoelectric focusing to matrix-assisted laser desorption/ionization time of flight mass spectrometry

Off-line coupling of capillary IEF (CIEF) with matrix-assisted laser desorption/ionization mass spectrometry was utilized for the analysis of human blood serum. Serum proteins were initially separated by CIEF, and fractions of the isoelectric separation were eluted sequentially to a MALDI-TOF MS sample target. During pressure elution of the CIEF sample, voltage was maintained across the capillary system utilizing a sheath flow arrangement to minimize band broadening induced by the laminar flow field. Both pI and mass information were obtained from the complex biological sample, similar to traditional 2-DE techniques, and the platform was faster (hours versus days), more automatable, and simpler than 2-DE. The volume of raw sample present in the actual analysis was approximately 100 nL, making this technique well suited for very rare specimens. Additionally, the speed and simplicity of the technology make it an attractive technique for performing initial comparative analyses of complex samples.     

Extending ribosomal protein identifications to unsequenced bacterial strains using matrix-assisted laser desorption/ionization mass spectrometry

A protocol has been developed that allows protein identifications using available DNA-based or protein sequences from a reference strain of a bacterial species to be extended to bacterial strains for which no prior DNA-based or protein sequence information exists. The protocol is predicated on careful isolation of a specific sub-cellular group of proteins. In this study, ribosomal proteins were chosen due to their high relative abundance and similarity in copy number per cell. After isolation of ribosomal proteins, MALDI-MS is used to acquire accurate protein molecular weights. An iterative comparison of reference protein molecular weights and identities is made to the resulting data, allowing for the straightforward identification of ribosomal proteins from any non-reference strains. This approach can reveal differences between proteins at the amino acid or post-translational level. The protocol was developed, validated and applied to ribosomal proteins from three strains of the extreme thermophile Thermus thermophilus. This approach revealed that nearly 60% of the ribosomal proteins from all three strains are identical. The extension of protein identification to additional bacterial strains can be useful in phylogenetic studies as well as in biomarker identification.     

Proteome analysis of human amnion and amniotic fluid by two-dimensional electrophoresis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Proteome analysis by 2-DE and PMF by MALDI-TOF MS was performed on human amnion and amniotic fluid at term. Ninety-two soluble and nineteen membrane proteins were identified from amnion. Thirty-five proteins were identified from amniotic fluid. Calgranulin A and B were found in all patients infected with Ureaplasma urealyticum, but not in any of the patients without infection, indicating that they are potential markers of intrauterine infection. Identity of calgranulin A and B was confirmed by MALDI-TOF/TOF MS. This study represents the first extensive analysis of the human amnion and amniotic fluid proteome at term and demonstrates that 2-DE and MALDI-TOF MS is a useful tool for identifying clinically significant biomarkers of problematic pregnancies.     

Selective detection of 2-nitrobenzenesulfenyl-labeled peptides by matrix-assisted laser desorption/ionization-time of flight mass spectrometry using a novel matrix

The 2-nitrobenzenesulfenyl (NBS) method, which is useful for quantitative proteome analysis, is based on stable isotope labeling of tryptophan residues with NBS chloride ((12)C(6)-NBSCl or (13)C(6)-NBSCl). We found that 3-hydroxy-4-nitrobenzoic acid (3H4NBA) is a more suitable matrix than 2,5-dihydroxybenzoic acid (DHB) for detecting NBS-labeled peptides by MALDI-quadrupole IT (QIT)-TOF MS . Furthermore, NBS-labeled peptides were selectively ionized and detected in a mixture of NBS-labeled and unlabeled peptides. Labeled paired peaks were easily detected without enrichment, nonpaired labeled peaks were clearly distinguished from unlabeled contaminating peptides, and nitrotyrosine-containing peptides were also selectively detected on the 3H4NBA matrix, while by-product-peaks arising from nitrobenzene moieties were suppressed. The use of 3H4NBA as a comatrix with CHCA improved the sensitivity of detection while substantially retaining the selectivity of 3H4NBA. The 3H4NBA matrix offers great advantages in terms of simplicity, sensitivity, and usability when used for the NBS method and for MALDI-TOF MS analysis applied to compounds having a nitrobenzene ring.     

Whole-cell matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for rapid identification of bacteria cultured in liquid media

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been used for many years to rapidly identify whole bacteria. However, no consistent methodology exists for the rapid identification of bacteria cultured in liquid media. Thus, in this study we explored the use of MALDI-TOF MS analysis for rapid identification of cells cultured in liquid media. We determined that 2,5-dihydroxybenzoic acid (50 mg mL^?1, 50% acetonitrile, 0.1% trifluoroacetic acid) was the best matrix solution for MALDI-TOF MS for this type of study. Moreover, the tested strains were successfully differentiated by principal component analysis, and the main characteristics of the mass peaks for each species were found in mixed culture samples. In addition, we found that the minimum number of cells for detection was 1.8×10³. In conclusion, our findings suggest that MS-based techniques can be developed as an auxiliary method for rapidly and accurately identifying bacteria cultured in liquid media.     

Rapid identification and characterization of Vibrio species using whole‐cell MALDI‐TOF mass spectrometry

Aims: Vibrio identification by means of traditional microbiological methods is time consuming because of the many biochemical tests that have to be performed to distinguish closely related species. This work aimed at evaluating the use of MALDI‐TOF mass spectrometry for the rapid identification of Vibrio (V.) spp. as an advantageous application to rapidly discriminate the most important Vibrio spp. and distinguish Vibrio spp. from closely related bacterial species like Photobacterium damselae and Grimontia hollisae and other aquatic bacteria like Aeromonas spp. Methods and Results: Starting from sub‐colony amounts of pure cultures grown on agar plates, a very simple sample preparation procedure was established and combined with a rapid and automated measurement protocol that allowed species identification within minutes. Closely related species like Vibrio alginolyticus and Vibrio parahaemolyticus or Vibrio cholerae and Vibrio mimicus could thus be differentiated by defining signatures of species‐identifying biomarker ions (SIBIs). As a reference method for species designation and for determination of relationships between strains with molecular markers, partial rpoB gene sequencing was applied. Conclusions: The MALDI‐TOF MS‐based method as well as the rpoB sequence‐based approach for Vibrio identification described in this study produced comparable classification results. The construction of phylogenetic trees from MALDI‐TOF MS and rpoB sequences revealed a very good congruence of both methods. Significance and Impact of the Study: Our results suggest that whole‐cell MALDI‐TOF MS‐based proteometric characterization represents a powerful tool for rapid and accurate classification and identification of Vibrio spp. and related species.     

Profile of native N‐linked glycan structures from human serum using high performance liquid chromatography on a microfluidic chip and time‐of‐flight mass spectrometry

Protein glycosylation involves the addition of monosaccharides in a stepwise process requiring no glycan template. Therefore, identifying the numerous glycoforms, including isomers, can help elucidate the biological function(s) of particular glycans. A method to assess the diversity of the N‐linked oligosaccharides released from human serum without derivatization has been developed using on‐line nanoLC and high resolution TOF MS. The N‐linked oligosaccharides were analyzed with MALDI FT‐ICR MS and microchip LC MS (HPLC–Chip/TOF MS). Two microfluidic chips were employed, the glycan chip (40 nL enrichment column, 43×0.075 mm² i.d. analytical column) and the high capacity chip (160 nL enrichment column, 140×0.075 mm² i.d. analytical column), both with graphitized carbon as the stationary phase. Both chips offered good sensitivity and reproducibility in separating a heterogeneous mixture of neutral and anionic oligosaccharides between injections. Increasing the length and volume of the enrichment and the analytical columns improved resolution of the peaks. Complex type N‐linked oligosaccharides were the most abundant oligosaccharides in human serum accounting for ∼96% of the total glycans identified, while hybrid and high mannose type oligosaccharides comprise the remaining ∼4%.     

Surface-enhanced laser desorption ionization/time-of-flight (SELDI-TOF) mass spectrometry (MS) as a phenotypic method for rapid identification of antibiotic resistance

Based on experiments with 10 defined strains of Escherichia coli, we present a new method for bacterial phenotyping using SELDI-TOF mass spectrometry. Changes in bacterial protein profiles in the context of the time of cultivation and the antibiotic environment were minimal. Proteom subprofiling may further distinguish between strains with specific susceptibility to antimicrobials. Mass spec-based methods may become common in the future of bacterial pathogen identification in clinical microbiology diagnostics.     

PAS‐cal: A repetitive peptide sequence calibration standard for MALDI mass spectrometry

Mass spectrometers equipped with matrix‐assisted laser desorption/ionization (MALDI‐MS) require frequent multipoint calibration to obtain good mass accuracy over a wide mass range and across large numbers of samples. In this study, we introduce a new synthetic peptide mass calibration standard termed PAS‐cal tailored for MALDI‐MS based bottom‐up proteomics. This standard consists of 30 peptides between 8 and 37 amino acids long and each constructed to contain repetitive sequences of Pro, Ala and Ser as well as one C‐terminal arginine residue. MALDI spectra thus cover a mass range between 750 and 3200 m/z in MS mode and between 100 and 3200 m/z in MS/MS mode. Our results show that multipoint calibration of MS spectra using PAS‐cal peptides compares well to current commercial reagents for protein identification by PMF. Calibration of tandem mass spectra from LC‐MALDI experiments using the longest peptide, PAS‐cal37, resulted in smaller fragment ion mass errors, more matching fragment ions and more protein and peptide identifications compared to commercial standards, making the PAS‐cal standard generically useful for bottom‐up proteomics.     

Surface-enhanced laser desorption/ionization time of flight mass spectrometry protein profiling identifies ubiquitin and ferritin light chain as prognostic biomarkers in node-negative breast cancer tumors

Novel prognostic biomarkers are imperatively needed to help direct treatment decisions by typing subgroups of node-negative breast cancer patients. The current study has used a proteomic approach of SELDI-TOF-MS screening to identify differentially cytosolic expressed proteins with a prognostic impact in 30 node-negative breast cancer patients with no relapse versus 30 patients with metastatic relapse. The data analysis took into account 73 peaks, among which 2 proved, by means of univariate Cox regression, to have a good cumulative prognostic-informative power. Repeated random sampling (n = 500) was performed to ensure the reliability of the peaks. Optimized thresholds were then computed to use both peaks as risk factors and, adding them to the St. Gallen ones, improve the prognostic classification of node-negative breast cancer patients. Identification of ubiquitin and ferritin light chain (FLC), corresponding to the two peaks of interest, was obtained using ProteinChip LDI-Qq-TOF-MS. Differential expression of the two proteins was further confirmed by Western blotting analyses and immunohistochemistry. SELDI-TOF-MS protein profiling clearly showed that a high level of cytosolic ubiquitin and/or a low level of FLC were associated with a good prognosis in breast cancer.     

Fractionation of grape tannins and analysis by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

Polymeric tannins, extracted from grape berries (Gamay variety), were fractionated according to their mean degree of polymerisation (mDP) on a styrene-divinylbenzene phase eluted with a gradient of methanol:chloroform. Increasing the percentage of methanol led to the solubilisation of higher molecular weight tannins. The mean mDP of each collected fraction was determined by acid-catalysed degradation in the presence of a nucleophilic reagent. The fractionation method produced a linear gradient of mDP varying between 1.84 and 19.34. The fractions were partially characterised by matrix assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF/MS). The spectra showed a complex mixture of proanthocyanidins and galloylated proanthocyanidins up to 4000 amu.     

Intact protein profiling in breast cancer biomarker discovery: Protein identification issue and the solutions based on 3D protein separation,bottom‐up and top‐down mass spectrometry

Proteomics profiling of intact proteins based on MALDI‐TOF MS and derived platforms has been used in cancer biomarker discovery studies. This approach suffers from a number of limitations such as low resolution, low sensitivity, and that no knowledge is available on the identity of the respective proteins in the discovery mode. Nevertheless, it remains the most high‐throughput, untargeted mode of clinical proteomics studies to date. Here we compare key protein separation and MS techniques available for protein biomarker identification in this type of studies and define reasons of uncertainty in protein peak identity. As a result of critical data analysis, we consider 3D protein separation and identification workflows as optimal procedures. Subsequently, we present a new protocol based on 3D LC‐MS/MS with top‐down at high resolution that enabled the identification of HNRNP A2/B1 intact peptide as correlating with the estrogen receptor expression in breast cancer tissues. Additional development of this general concept toward next generation, top‐down based protein profiling at high resolution is discussed.