Acidic lipase Lip I.3 from a Pseudomonas fluorescens‐like strain displays unusual properties and shows activity on secondary alcohols

Aims

Identification, cloning, expression and characterization of a novel lipase – Lip I.3 – from strain Pseudomonas CR‐611.

Methods and Results

The corresponding gene was identified and isolated by PCR‐amplification, cloned and expressed in Escherichia coli, and purified by refolding from inclusion bodies. Analysis of the deduced amino acid sequence revealed high homology with members of the bacterial lipase family I.3, showing 97% identity to a putative lipase from Pseudomonas fluorescens Pf0‐1, and 93% identity to a crystallized extracellular lipase from Pseudomonas sp. MIS38. A typical C‐terminal type I secretion signal and several putative Ca²⁺ binding sites were also identified. Experimental data confirmed that Lip I.3 requires Ca²⁺ ions for correct folding and activity. The enzyme differs from the previously reported family I.3 lipases in optimal pH, being the first acidophilic lipase reported in this family. Furthermore, Lip I.3 shows a strong preference for medium chain fatty acid esters and does not display interfacial activation. When tested for activity on secondary alcohol hydrolysis, Lip I.3 displayed higher efficiency on aromatic alcohols rather than on alkyl alcohols.

Conclusions

A new family I.3 lipase with unusual properties has been isolated, cloned and described. This will contribute to a better knowledge of family I.3 lipases, a family that has been scarcely explored, and that might provide a novel source of biocatalysts.

Significance and Impact of the Study

The unusual properties shown by Lip I.3 and the finding of activity and enantioselectivity on secondary alcohol esters may contribute to the development of new enzymatic tools for applied biocatalysis.     

Application of a sensitive collection heuristic for very large protein families: Evolutionary relationship between adipose triglyceride lipase (ATGL) and classic mammalian lipases

Background  

Manually finding subtle yet statistically significant links to distantly related homologues becomes practically impossible for very populated protein families due to the sheer number of similarity searches to be invoked and analyzed. The unclear evolutionary relationship between classical mammalian lipases and the recently discovered human adipose triglyceride lipase (ATGL; a patatin family member) is an exemplary case for such a problem.     

High-level expression and biochemical characterization of a novel cold-active lipase from <Emphasis Type="Italic">Rhizomucor endophyticus</Emphasis>

Objectives

To identify novel cold-active lipases from fungal sources and improve their production by heterologous expression in Pichia pastoris.

Results

A novel cold-active lipase gene (ReLipB) from Rhizomucor endophyticus was cloned. ReLipB was expressed at a high level in Pichia pastoris using high cell-density fermentation in a 5-l fermentor with the highest lipase activity of 1395 U/ml. The recombinant lipase (RelipB) was purified and biochemically characterized. ReLipB was most active at pH 7.5 and 25 °C. It was stable from pH 4.5–9.0. It exhibited broad substrate specificity towards p-nitrophenyl (pNP) esters (C₂–C₁₆) and triacylglycerols (C₂–C₁₂), showing the highest specific activities towards pNP laurate (231 U/mg) and tricaprylin (1840 U/mg), respectively. In addition, the enzyme displayed excellent stability with high concentrations of organic solvents including cyclohexane, n-hexane, n-heptane, isooctane and petroleum ester and surfactants.

Conclusions

A novel cold-active lipase from Rhizomucor endophyticus was identified, expressed at a high level and biochemically characterized. The high yield and unique enzymatic properties make this lipase of some potential for industrial applications.

     

Modification of fatty acid selectivity of <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase A by error-prone PCR

Objective

To generate Candida antarctica lipase A (CAL-A) mutants with modified fatty acid selectivities and improved lipolytic activities using error-prone PCR (epPCR).

Results

A Candida antarctica lipase A mutant was obtained in three rounds of epPCR. This mutant showed a 14 times higher ability to hydrolyze triacylglycerols containing conjugated linoleic acids, and was 12 and 14 times more selective towards cis-9, trans-11 and trans-10, cis-12 isomers respectively, compared to native lipase. Lipolytic activities towards fatty acid esters were markedly improved, in particular towards butyric, lauric, stearic and palmitic esters.

Conclusion

Directed molecular evolution is an efficient method to generate lipases with desirable selectivity towards CLA isomers and improved lipolytic activities towards esters of fatty acids.

     

Production and regulation of different lipase activities from Rhizopus chinensis in submerged fermentation by lipids

The fungal Rhizopus chinensis could produce several types of lipase, which were mainly intracellular. During the whole-cell lipase production by this strain in submerged fermentation, it was observed that two catalytic characteristics (hydrolytic and synthetic activity) of lipases were different with addition of lipids. The hydrolytic activity of the lipase was not induced by lipids efficaciously and could be detected regardless of whether substrate-related compounds were present. However, it was found that the induction of lipids for the synthetic activity lipase was significant, and that nearly no synthetic activity was detected while the medium contained no lipids. When only a little lipid (1 g/L) was added to medium, the synthetic activity increased sharply in the initial process of fermentation. Analysis of crude membrane-bound lipase by SDS-PAGE confirmed this induction. De novo biosynthesis of lipases, especially the lipase with synthetic activity occurred only when lipids existed. Cell growth and maltose repress the lipase production with synthetic activity, but have little influence on the lipase production with hydrolytic activity. Since the production process of mycelium-bound lipase with hydrolytic activity was different, it was reasonable to consider hydrolytic activity and synthetic activity for different application purposes. Whole-cell lipase obtained from fermentation process with high synthetic activity showed excellent catalytic ability in solvent free system on synthesis of ethylcaprylate and ethyloleate, the conversion could reach more than 90% in 5 h.     

An integrated approach to produce biodiesel and monoglycerides by enzymatic interestification of babassu oil (Orbinya sp)

Two screenings of commercial lipases were performed to find a lipase with superior performance for the integrated production of biodiesel and monoglycerides. The first screening was carried out under alcoholysis conditions using ethanol as acyl acceptor to convert triglycerides to their corresponding ethyl esters (biodiesel). The second screening was performed under glycerolysis conditions to yield monoglycerides (MG). All lipases were immobilized on silica–PVA composite by covalent immobilization. The assays were performed using babassu oil and alcohols (ethanol or glycerol) in solvent free systems. For both substrates, lipase from Burkholderia cepacia (lipase PS) was found to be the most suitable enzyme to attain satisfactory yields. To further improve the process, the Response Surface Methodology (RSM) was used to determine the optima operating conditions for each biotransformation. For biodiesel production, the highest transesterification yield (>98%) was achieved within 48 h reaction at 39 °C using an oil-to-ethanol molar ratio of 1:7. For MG production, optima conditions corresponded to oil-to-glycerol molar ratio of 1:15 at 55 °C, yielding 25 wt.% MG in 6 h reaction. These results show the potential of B. cepacia lipase to catalyze both reactions and the feasibility to consider an integrated approach for biodiesel and MG production.     

Biochemical and molecular characterisation of a thermoactive, alkaline and detergent-stable lipase from a newly isolated Staphylococcus aureus strain

A newly soil-isolated Staphylococcus aureus strain secretes a non-induced lipase in the culture medium. The extracellular lipase from S. aureus (SAL3) is purified to homogeneity. The purified enzyme is a tetrameric protein (180 kDa) corresponding to the association of four lipase molecules. The 15 N-terminal amino acid residues showed a high degree of homology with other staphylococcal lipase sequences. The part of the gene encoding the mature SAL3 is cloned and sequenced. The deduced polypeptide sequence, corresponding to the mature SAL3, was very similar to the mature Staphylococcus simulans lipase sequence with two additional amino acid residues (LK) at the N-terminus of SAL3. The lipase activity is maximal at pH 9.5 and 55 °C. The specific activity of about 4200 U/mg or 3500 U/mg was measured using tributyrin or olive oil emulsion as substrate, respectively, at pH 9.5 and 55 °C.In contrast to other staphylococcal lipases previously characterised, SAL3 is found to be stable between pH 5 and 12 after 24 h incubation. The enzyme retained 50% of its activity after 60 min incubation at 60 °C. This novel lipase is able to hydrolyse its substrate in presence of various oxidizing agents as well as some surfactants and some commercial detergents, then SAL3 can be considered as a good candidate for industrial and biotechnological applications.     

An improved method of lipase preparation incorporating both solvent treatment and immobilization onto matrix

A simple and effective preparation of lipases for use in organic solvents is hereby proposed. Lipases in aqueous solution were treated with isopropanol, immediately followed by immobilization onto a commercially available macroporous resin CRBO2 (crosslinked polystyrene with N-methylglucamine as a functional group). The dual modification of lipases by (1) isopropanol treatment and (2) immobilization improved the activity and stability of lipases more significantly than either of the two treatments alone. The degree of lipase activation was dependent on isopropanol–buffer (v/v) ratio and the source of lipase used. Among the lipases tested, Rhizopus oryzae lipase was more significantly activated. The maximum specific activity of R. oryzae lipase after dual modification was 94.9 mmol h⁻¹ g⁻¹, which was, respectively, 3.3-, 2.5- and 1.5-fold of untreated free, untreated immobilized and treated free lipases. The conformations of the treated and untreated free lipases were investigated by circular dichroism (CD) measurement. Changes in the far- and near-UV CD spectra of lipase indicate that lipase activation is accompanied by changes in secondary and tertiary structures of lipases. The increase in negative molar elipticity at 222 nm suggests that the α-helical content of lipase increase after pretreatment.     

A novel thermostable and organic solvent-tolerant lipase from <Emphasis Type="Italic">Xanthomonas oryzae</Emphasis> pv. <Emphasis Type="Italic">oryzae</Emphasis> YB103: screening,purification and characterization

Thermostable lipases offer major biotechnological advantages over mesophilic lipases. In this study, an intracellular thermostable and organic solvent-tolerant lipase-producing strain YB103 was isolated from soil samples and identified taxonomically as Xanthomonas oryzae pv. oryzae. The lipase from X. oryzae pv. oryzae YB103 (LipXO) was purified 101.1-fold to homogeneity with a specific activity of 373.9 U/mg. The purified lipase showed excellent thermostability, exhibiting 51.1 % of its residual activity after incubation for 3 days at 70 °C. The enzyme showed optimal activity at 70 °C, suggesting it is a thermostable lipase. LipXO retained 75.1–154.1 % of its original activity after incubation in 20 % (v/v) hydrophobic organic solvents at 70 °C for 24 h. Furthermore, LipXO displayed excellent stereoselectivity (e.e._p >99 %) toward (S)-1-phenethyl alcohol in n-hexane. These unique properties of LipXO make it promising as a biocatalyst for industrial processes.     

Biochemical and Structural Characterization of Two Site-Directed Mutants of <Emphasis Type="Italic">Staphylococcus xylosus</Emphasis> Lipase

Staphylococcus xylosus AF208229 lipase was expressed in E. coli containing an histidine-tag (WT-Val). In the present work, in order to check the importance of the residue 309 in the specific activity, the amino acid side chain residue valine 309 was substituted by aspartate or lysine through site-directed mutagenesis. Both mutant lipases (MUT-Lys and MUT-Asp) were expressed in E. coli and the recombinant histidine-tagged lipases were purified by immobilized metal ion affinity chromatography. The enzyme activity was determined using p-nitrophenyl butyrate as substrate and secondary structure content was evaluated by circular dichroism. MUT-Lys and MUT-Asp presented significant increase of lipase activity (P < 0.05) in comparison to WT-Val, although highest activities for the three enzymes were observed at the same pH and temperature (pH 9.0 and 42°C). The wild type and mutant lipases presented high thermal stability, after 30 min of incubation at 80°C all enzymes retained their initial activities.     

Structural and functional characterization of a novel lipolytic enzyme from a Brazilian Cerrado soil metagenomic library

Objective

To isolate putative lipase enzymes by screening a Cerrado soil metagenomic library with novel features.

Results

Of 6720 clones evaluated, Clone W (10,000 bp) presented lipolytic activity and four predicted coding sequences, one of them LipW. Characterization of a predicted esterase/lipase, LipW, showed 28% sequence identity with an arylesterase from Pseudomonas fluorescens (pdb|3HEA) from protein database (PDB). Phylogenetic analysis showed LipW clustered with family V lipases; however, LipW was clustered in different subclade belonged to family V, suggesting a different subgroup of family V. In addition, LipW presented a difference in family V GH motif, a glycine replaced by a serine in GH motif. Estimated molecular weight and stokes radius values of LipW were 29,338.67–29,411.98 Da and 2.58–2.83 nm, respectively. Optimal enzyme activity was observed at pH 9.0–9.5 and at 40 °C. Circular dichroism analysis estimated secondary structures percentages as approximately 45% α-helix and 15% β-sheet, consistent with the 3D structure predicted by homology.

Conclusion

Our results demonstrate the isolation of novel family V lipolytic enzyme with biotechnological applications from a metagenomic library.

     

The short form of the recombinant CAL-A-type lipase UM03410 from the smut fungus <Emphasis Type="Italic">Ustilago maydis</Emphasis> exhibits an inherent <Emphasis Type="Italic">trans</Emphasis>-fatty acid selectivity

The Ustilago maydis lipase UM03410 belongs to the mostly unexplored Candida antarctica lipase (CAL-A) subfamily. The two lipases with […] the highest identity are a lipase from Sporisorium reilianum and the prototypic CAL-A. In contrast to the other CAL-A-type lipases, this hypothetical U. maydis lipase is annotated to possess a prolonged N-terminus of unknown function. Here, we show for the first time the recombinant expression of two versions of lipase UM03410: the full-length form (lipUMf) and an N-terminally truncated form (lipUMs). For comparison to the prototype, the expression of recombinant CAL-A in E. coli was investigated. Although both forms of lipase UM03410 could be expressed functionally in E. coli, the N-terminally truncated form (lipUMs) demonstrated significantly higher activities towards p-nitrophenyl esters. The functional expression of the N-terminally truncated lipase was further optimized by the appropriate choice of the E. coli strain, lowering the cultivation temperature to 20 °C and enrichment of the cultivation medium with glucose. Primary characteristics of the recombinant lipase are its pH optimum in the range of 6.5–7.0 and its temperature optimum at 55 °C. As is typical for lipases, lipUM03410 shows preference for long chain fatty acid esters with myristic acid ester (C14:0 ester) being the most preferred one. More importantly, lipUMs exhibits an inherent preference for C18:1Δ9 trans and C18:1Δ11 trans-fatty acid esters similar to CAL-A. Therefore, the short form of this U. maydis lipase is the only other currently known lipase with a distinct trans-fatty acid selectivity.     

Efficient display of active lipase LipB52 with a <Emphasis Type="Italic">Pichia pastoris</Emphasis> cell surface display system and comparison with the LipB52 displayed on <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> cell surface

Background  

For industrial bioconversion processes, the utilization of surface-displayed lipase in the form of whole-cell biocatalysts is more advantageous, because the enzymes are displayed on the cell surface spontaneously, regarded as immobilized enzymes.     

Enhancing performance of lipase immobilized on methyl-modified silica aerogels at the adsorption and catalysis processes: Effect of cosolvents

Hydrophobic silica aerogels modified with methyl group were applied as support to immobilize Candida rugosa lipase (CRL). At the adsorption process, different alcohols were used to intensify the immobilization of CRL. The results showed that n-butanol wetting the hydrophobic support prior to contacting with enzyme solution could promote lipase activity, but the adsorption quantity onto the support decreased. Based on this, a novel immobilization method was proposed: the support contacted with enzyme solution without any alcohols, and then the immobilized enzymes were activated by 90% (V) n-butanol solution. The experimental results showed that this method could keep high adsorption quantity (413.0 mg protein/g support) and increase the lipase specific activity by more than 50%. To improve the stability of immobilized lipase, the support after adsorption was contacted with n-octane to form an oil layer covering the immobilized lipases, thus the leakage can be decreased from over 30–4% within 24 h. By utilizing proper cosolvents, a high enzyme activity and loading capacity as well as little loss of lipase was achieved without covalent linkage between the lipase and the support. This is known to be an excellent result for immobilization achieved by physical adsorption only.     

Adding value to a toxic residue from the biodiesel industry: production of two distinct pool of lipases from <Emphasis Type="Italic">Penicillium simplicissimum</Emphasis> in castor bean waste

In countries with a strong agricultural base, such as Brazil, the generation of solid residues is very high. In some cases, these wastes present no utility due to their toxic and allergenic compounds, and so are an environmental concern. The castor bean (Ricinus communis) is a promising candidate for biodiesel production. From the biodiesel production process developed in the Petrobras Research Center using castor bean seeds, a toxic and alkaline waste is produced. The use of agroindustrial wastes in solid-state fermentation (SSF) is a very interesting alternative for obtaining enzymes at low cost. Therefore, in this work, castor bean waste was used, without any treatment, as a culture medium for fungal growth and lipase production. The fungus Penicillium simplicissimum was able to grow and produce an enzyme in this waste. In order to maximize the enzyme production, two sequential designs–Plackett-Burman (variable screening) followed by central composite rotatable design (CCRD)—were carried out, attaining a considerable increase in lipase production, reaching an activity of 155.0 U/g after 96 h of fermentation. The use of experimental design strategy was efficient, leading to an increase of 340% in the lipase production. Zymography showed the presence of different lipases in the crude extract. The partial characterization of such extract showed the occurrence of two lipase pools with distinct characteristics of pH and temperature of action: one group with optimal action at pH 6.5 and 45°C and another one at pH 9.0 and 25°C. These results demonstrate how to add value to a toxic and worthless residue through the production of lipases with distinct characteristics. This pool of enzymes, produced through a low cost methodology, can be applied in different areas of biotechnology.     

Development of a monolith based immobilized lipase micro-reactor for biocatalytic reactions in a biphasic mobile system

This paper reports a simple method for producing macroporous silica-monoliths with controllable porosity that can be used for the immobilization of lipases to generate an active and stable micro-reactor for biocatalysis. A range of commercially available lipases has been examined using the hydrolysis reactions of 4-nitrophenyl butyrate in water–decane media. The kinetic studies performed have identified that a similar value for k_cat is obtained for the immobilized Candida antarctica lipase A (0.13 min⁻¹) and the free lipase in solution (0.12 min⁻¹) whilst the immobilized apparent Michaelis constant K_m (3.1 mM) is 12 times lower than the free lipase in solution (38 mM). A 96% conversion was obtained for the immobilized C. antarctica lipase A compared to only 23% conversion for the free lipase. The significant higher conversions obtained with the immobilized lipases were mainly attributed to the formation of a favourable biphasic system in the continuous flowing micro-reactor system, where a significant increase in the interfacial activation occurred. The immobilized C. antarctica lipase A on the monolith also exhibited improved stability, showing 64% conversion at 80 °C and 70% conversion after continuous running for 480 h, compared to 40 and 20% conversions under the same temperature and reaction time for the free lipase.     

Combination of two lipases more efficiently catalyzes methanolysis of soybean oil for biodiesel production in aqueous medium

A combination of two lipases was employed to catalyze methanolysis of soybean oil in aqueous medium for biodiesel production. The two lipase genes were cloned from fungal strains Rhizomucor miehei and Penicillium cyclopium, and each expressed successfully in Pichia pastoris. Activities of the 1,3-specific lipase from R. miehei (termed RML) and the non-specific mono- and diacylglycerol lipase from P. cyclopium (termed MDL) were 550 U and 1545 U per ml respectively, and enzymatic properties of these supernatant of fermentation broth (liquid lipase) were stable at 4 °C for >3 months. Under optimized conditions, the ratio of biodiesel conversion after 12 h at 30 °C, using RML alone, was 68.5%. When RML was assisted by addition of MDL, biodiesel conversion ratio was increased to >95% under the same reaction conditions. The results suggested that combination of lipases with different specificity, for enzymatic conversion of more complex lipid substrates, is a potentially useful strategy for biodiesel production.     

Identification of lipase encoding genes from Antarctic seawater bacteria using degenerate primers: Expression of a cold-active lipase with high specific activity

Cold-active enzymes are valuable catalysts showing high activity at low and moderate temperatures and low thermostability. Among cold-active enzymes, lipases offer a great potential in detergent, cosmetic, biofuel and food or feed industries. In this paper we describe the identification of novel lipase coding genes and the expression of a lipase with high activity at low temperatures. The genomic DNA from Antarctic seawater bacteria showing lipolytic activity at 4 °C was used to amplify five DNA fragments that partially encode novel lipases using specifically designed COnsensus-DEgenerate Hybrid Oligonucleotide Primers (CODEHOP). All the fragments were found to have a high identity with an α/β-hydrolase domain-containing protein identified by the sequencing of the complete genome of Shewanella frigidimarina NCIMB 400. The complete sequence of one of the lipase-coding gene fragments, lipE13, was obtained by genome walking. Considering that the other fragments had a high identity to the putative lipase from S. frigidimarina NCIMB 400, the complete lipase genes were amplified using oligonucleotide primers designed based on the 5′ and 3′ regions of the coding sequence of the related protein.This strategy allowed the amplification of 3 lipase-encoding genes of which one was expressed in the periplasm using the Escherichia coli BL21(DE3)/pET-22b(+) expression system. The recombinant protein was obtained with activity toward p-nitrophenyl caproate showing a high specific activity between 15 and 25 °C.     

Directed evolution of Bacillus licheniformis lipase for improvement of thermostability

Lipases catalyze the hydrolysis of carboxylic acid esters and owing to their vast substrate specificity, they have many industrial applications. Due to the demand of thermostable lipases in industrial applications, we have enhanced the thermostability of lipase from Bacillus licheniformis RSP-09. The thermostable mutant lipases of Bacillus licheniformis RSP-09 were isolated following two rounds of directed evolution using error-prone PCR. The best mutant lipases obtained after first and second round of error-prone PCR were purified and characterized. The mutant lipases showed increased thermostability and retained catalytic function. The best mutant lipase (eP-231-51) showed 13.5-fold increase in percentage thermal stability (% remaining activity after incubation of purified enzyme at 60 °C for 1 h) than wild-type lipase. Also, this mutant lipase (ep-231-51) showed 30% improved catalytic efficiency compared with the wild-type which is due to significant decrease in K_m and marginal increase in k_cat. In addition, the thermostable mutant lipases have shown resistance to hydrophobic organic solvents. The role of mutations in the best mutant lipases of second round i.e. eP-231-51 (Asp72Gly, Asp61Gly, Tyr129His, and Thr101Pro) and eP-231-137 (Leu49Arg, Thr101Pro, Asp72Gly), that led to thermostability have been postulated after the comparison of molecular models of wild-type and mutated enzymes.