Reaerosolization of Fluidized Spores in Ventilation Systems

This project examined dry, fluidized spore reaerosolization in a heating, ventilating, and air conditioning duct system. Experiments using spores of Bacillus atrophaeus, a nonpathogenic surrogate for Bacillus anthracis, were conducted to delineate the extent of spore reaerosolization behavior under normal indoor airflow conditions. Short-term (five air-volume exchanges), long-term (up to 21,000 air-volume exchanges), and cycled (on-off) reaerosolization tests were conducted using two common duct materials. Spores were released into the test apparatus in turbulent airflow (Reynolds number, 26,000). After the initial pulse of spores (approximately 10¹⁰ to 10¹¹ viable spores) was released, high-efficiency particulate air filters were added to the air intake. Airflow was again used to perturb the spores that had previously deposited onto the duct. Resuspension rates on both steel and plastic duct materials were between 10⁻³ and 10⁻⁵ per second, which decreased to 10 times less than initial rates within 30 min. Pulsed flow caused an initial spike in spore resuspension concentration that rapidly decreased. The resuspension rates were greater than those predicted by resuspension models for contamination in the environment, a result attributed to surface roughness differences. There was no difference between spore reaerosolization from metal and that from plastic duct surfaces over 5 hours of constant airflow. The spores that deposited onto the duct remained a persistent source of contamination over a period of several hours.     

Enhanced spore production ofBacillus thuringiensis by fed-batch culture

Summary Fed-batch culture was carried out to increase cell mass followed by batch culture for spore production ofbacillus thuringiensis. High cell mass obtained by increasing the feeding glucose concentration in constant fed-batch culture which supported fast cell growth resulted in good sporulation during subsequent batch culture, and the maximum cell mass of 72.6 g/L and spore concentration of 1.25×10¹⁰ spores/mL could be obtained.     

Purification of Dictyostelium discoideum spores by centrifugation in percoll density gradients with retention of morphological and biochemical integrity

Rapid and reliable methods have been developed for the preparation and purification of dormant spores of the cellular slime mold, Dictyostelium discoideum, using Percoll density gradient centrifugation. Percoll gradients were generated in situ (20,000g; 30 min) with subsequent banding of nondamaged dormant spores at an isopycnic density equal to about 1.12 g/cm³. Examination of the prepared spores by phase-contrast microscopy indicated the absence of stalk cells and other nonspore material and the retention by the spores of their morphological integrity. Biochemical integrity was also retained by the isolated spores as evidenced by their efficiency of germination and the level of endogenous trehalase activity present in crude cell-free spore extracts.     

Spore production in solid-state fermentation of rice by Clonostachys rosea,a biopesticide for gray mold of strawberries

Gray mold caused by Botrytis cinerea is an important disease of strawberry. Clonostachys rosea is a mycoparasite of B. cinerea that reduces fruit losses when used as a biocontrol agent. Since spore production by C. rosea has not been optimized, we investigated factors affecting sporulation under aseptic conditions on white rice grains. The greatest spore production in glass flasks, 3.4 × 10⁹ spores/g-dry-matter (gDM), occurred with an initial moisture content of 46% (w/w wet basis), inoculated with 1 × 10⁶ spores/gDM and hand shaken every 15 days. However, a lower inoculum density (9 × 10³ spores/gDM) and no shaking also gave acceptable sporulation. In plastic bags 1.1 × 10⁸ spores/gDM were produced in 15 days, suggesting that larger scale production may be feasible: with this spore content, 24 m² of incubator space would produce sufficient spores for the continued treatment of 1 ha of strawberry plants.     

Manganese Oxidation by Spores and Spore Coats of a Marine Bacillus Species

Bacillus sp. strain SG-1 is a marine bacterial species isolated from a near-shore manganese sediment sample. Its mature dormant spores promote the oxidation of Mn²⁺ to MnO₂. By quantifying the amounts of immobilized and oxidized manganese, it was established that bound manganese was almost instantaneously oxidized. When the final oxidation of manganese by the spores was partly inhibited by NaN₃ or anaerobiosis, an equivalent decrease in manganese immobilization was observed. After formation of a certain amount of MnO₂ by the spores, the oxidation rate decreased. A maximal encrustment was observed after which no further oxidation occurred. The oxidizing activity could be recovered by reduction of the MnO₂ with hydroxylamine. Once the spores were encrusted, they could bind significant amounts of manganese, even when no oxidation occurred. Purified spore coat preparations oxidized manganese at the same rate as intact spores. During the oxidation of manganese in spore coat preparations, molecular oxygen was consumed and protons were liberated. The data indicate that a spore coat component promoted the oxidation of Mn²⁺ in a biologically catalyzed process, after adsorption of the ion to incipiently formed MnO₂. Eventually, when large amounts of MnO₂ were allowed to accumulate, the active sites were masked and further oxidation was prevented.     

Über Den Einfluss Von UV-Strahlen Auf Die Überlebensrate Von Sporen Verschiedener Aspergillus-Arten

Summary Dry spores of 11 various mold species were irradiated with UV-rays. It was found that by irradiation with the same dosis the survival of the spores was very different and depended on the quantity of irradiating energy acting on a single spore. It seems that between the survival and the spore mass there exists a relationship, what is indicated by the sensibility index (E_f) which is the greater the less the survival. Probably the survival of the spores depended on its single or double cell wall.     

Trichostomopsis aaronis (Lor.) Agnew & Townsend new to the U.S.S.R.

Abstract

Occurrence of Ptilidium pulcherrimum in transects and spore dispersal from a single colony have been studied in a coastal spruce forest in northern Sweden. The main substrate type was rotting wood with 75% of all occurrences. Annual spore production was 68,500 spores/m² forest, 640,000 spores/m² substrate and 44,000,000 spores/m² colony. Almost 50% of the spores were deposited within 2.5 m of the colony. Annual spore deposition between colonies was estimated to be between 24,000–39,000 and deposition on the main substrate, decaying logs, was about 340–600 spores/m² forest. P. pulcherrimum showed a clumped distribution pattern up to about a 15 m neighbourhood distance. This pattern could not be explained by a similar clumping of the substrate. Instead a limitation by distance in establishment due to a deficit of spores is assumed.     

Emission rate of charged spores in basidiomycetous fungi and the relaxation time of their electric charges

Basidiospores are one of the main components of coarse fraction of atmospheric aerosol. Majority of them, the ballistospores of 20,000 species of Basidiomycotina, carry electrostatic charges when getting airborne. To study the polarity and magnitude of primary charges and the hymenial emission rate of charged spores, 128 spore samples of 31 species of Agaricomycetes were collected in natural conditions. A portable device was placed under the fruiting body and the freely falling charged spores were extracted from the air by a horizontal homogeneous electrostatic field. The charge polarity distribution was the same in all intraspecies spore samples; it was unipolar-positive, unipolar-negative, or bipolar, depending on the species. The mean spore charge magnitude was 21–981 e, and it was not related to the emission rate of charged spores. The hymenial emission rate was fluctuating, and the maximum value was 715 charged spores cm^?2 s^?1. To estimate the territorial emission rate of charged spores, area of the hymenial surface per hectare of forest was calculated for three species and the maximum values were 11 m² ha^?1 and 8.6 × 10⁷ charged spores ha^?1 s^?1. Calculations showed that a spore charge diminished sevenfold within 47 min. Ecologists, health and agricultural scientists could be interested in this information. It could be useful by investigating the role of microorganisms in meteorological phenomena and in atmospheric processes in general.     

Temporal control of autoactivator synthesis and secretion during spontaneous spore germination in Dictyostelium discoideum

SG mutant and aged wild type spores of the cellular slime mold Dictyostelium discoideum germinate in the absence of an externally applied activation treatment. This type of germination is referred to as autoactivation. During the swelling stage of autoactivation, spores release a factor, the autoactivator, capable of stimulating germination in subsequent spore populations. The autoactivator was not present in the dormant spore, but it or a precursor was produced internally during the first hour of autoactivation. This production was sensitive to moderately high temperatures (+31° C) and was completely destroyed by heat activation (45° C for 30 min). Internal production of the autoactivator was not sensitive to protein synthesis inhibitors. However, the release of the activator from the spore appeared to be regulated by protein synthesis. Internal autoactivator was also produced in the aged wild type strain during the postautoactivation lag phase. The activator could not be directly isolated from within the germinating spore. Its activity on the rest of the spore population was dependent upon its release from the germinating spore. A model is presented integrating the effects of heat, cycloheximide, autoinhibitor and autoactivator on spores of D. discoideum.     

SPORE ULTRASTRUCTURE OF THE MYXOMYCETE PHYSARUM POLYCEPHALUM

Spores of the true slime mold Physarum polycephalum were examined at several stages of their development by means of scanning and transmission electron microscopy. The spores were globose, spine-covered structures produced within a sporangium enclosed in a tough, noncellular peridium. Cytologically, the spore represented a typical eukaryotic cell, having discrete organelles similar to spores of other myxomycetes. The presence of dictyosomes, helical filaments, and microbodies in these cells, as well as the further elucidation of the cell wall and the “polysaccharide-containing” areas, represent new contributions to the ultrastructure of the myxomycete spore. Of special interest were observations of metaphase nuclei just prior to spore cleavage, interphase nuclei in young spores, and nuclei in mature spores containing synaptonemal complexes. These observations indicate that in Physarum polycephalum mitosis occurs just prior to spore cleavage, and meiosis takes place after spore cleavage.     

A new two-phase kinetic model of sporulation of Clonostachys rosea in a new solid-state fermentation reactor

A new two-phase kinetic model of sporulation of Clonostachys rosea in a new solid-state fermentation (SSF) reactor was proposed. The model including exponential and logistic models was applied to study the simultaneous effect of temperature, initial moisture content, medium thickness and surface porosity of the plastic membrane on C. rosea sporulation. The model fits experimental data very well and allows accurate predictions of spore production. The maximum spore production achieved 3.360 × 10¹⁰ (spores/gDM), about 10 times greater than that in traditional SSF reactor(data not shown). The new reactor can provide two times sporulation surface area. Moisture content can be adjusted by changing the surface porosity to meet the spore production. Two mixings carried out during fermentation makes medium loose and results in a mass of new sporulation surface area. Therefore, the new SSF reactor would have great potential for application in bulk spore production of fungal biocontrol agents.     

Autonomous and non-autonomous traits mediate social cooperation in <Emphasis Type="Italic">Dictyostelium discoideum</Emphasis>

In the trishanku (triA ⁻ ) mutant of the social amoeba Dictyostelium discoideum, aggregates are smaller than usual and the spore mass is located mid-way up the stalk, not at the apex. We have monitored aggregate territory size, spore allocation and fruiting body morphology in chimaeric groups of (quasi-wild-type) Ax2 and triA ⁻ cells. Developmental canalisation breaks down in chimaeras and leads to an increase in phenotypic variation. A minority of triA ⁻ cells causes largely Ax2 aggregation streams to break up; the effect is not due to the counting factor. Most chimaeric fruiting bodies resemble those of Ax2 or triA ⁻ . Others are double-deckers with a single stalk and two spore masses, one each at the terminus and midway along the stalk. The relative number of spores belonging to the two genotypes depends both on the mixing ratio and on the fruiting body morphology. In double-deckers formed from 1:1 chimaeras, the upper spore mass has more Ax2 spores, and the lower spore mass more triA ⁻ spores, than expected. Thus, the traits under study depend partly on the cells’ own genotype and partly on the phenotypes, and so genotypes, of other cells: they are both autonomous and non-autonomous. These findings strengthen the parallels between multicellular development and behaviour in social groups. Besides that, they reinforce the point that a trait can be associated with a genotype only in a specified context.     

Germination and physiological properties of Frankia spores

Spores from four Frankia strains were isolated and purified to homogeneity. The purified spores were biochemically and physiologically characterized and compared to vegetative cells. Frankia spores exhibited low levels of endogenous respiration that were at least ten-fold lower than the endogenous respiration rate of vegetative cells. The macromolecular content of purified spores and vegetative cells differed. One striking difference among the Frankia spores was their total DNA content. From DAPI staining experiments, only 9% of strain ACN1^AG spore population contained DNA. With strains DC12 and EuI1c, 92% and 67% of their spore population contained DNA. The efficiency of spore germination was correlated to the percentage of the spore population containing DNA. These results suggest that the majority of strain ACN1^AG spores were immature or nonviable. The presence of a solidifying agent inhibited the initial stages of spore germination, but had no effect once the process had been initiated. The optimal incubation temperature for spore germination was 25°C and 30°C for strains DC12 and EuI1c, respectively. A mild heat shock increased the efficiency of spore germination, while root extracts also stimulated spore germination. These results suggest that strains DC12 and EuI1c may be suitable strains for further germination and genetic studies.     

Correlation between alkaline activation of Bacillus thuringiensis var. kurstaki spores and crystal production

The spores of crystal-forming (Cry⁺) and non-crystal-forming (Cry^-) strains of Bacillus thuringiensis var. kurstaki and Bacillus cereus were tested for the ability to be activated by 0.1 m K₂CO₃ (pH 10). Only the spores of crystal-forming strains could be activated, and this phenotype was independent of whether crystals were present with the spores in the activation solution. The spores of a B. thuringiensis var. kurstaki strain that is temperature sensitive for protoxin accumulation could be activated by the alkaline solution when produced at the permissive temperature, whereas spores produced at the nonpermissive temperature were not activated. The results indicate that protoxin in the spore coat is responsible for the alkaline-activation phenotype and may serve an ecological function for the organism.     

Dry mass changes in germinating spores of Diplodia maydis

Summary The dry mass of two-celled Diplodia maydis spores was measured both before and after germination by quantitative interference microscopy. The dry mass of spores declined approximately 50% during germination. However, the dry mass of germinating spores plus the dry mass of their germ tubes was greater than the dry mass of spores before germination. We conclude that the germinating spores absorbed nutrients released from non-germinating spores.The dry mass of fungal spores can be estimated by weighing large numbers of spores and determining the mean from sample spore counts. Mumford and Pappelis(4) determined the total dry mass of individual spores of Fusarium roseum and the contained lipid bodies before and after spores germinated using quantitative interference microscopy. The mean spore dry mass before germination was 57 pg. Lipid bodies accounted for about 61% of that mass and decreased as spores germinated. The total dry mass of the spore and germ tube 24 hr later greatly exceeded that of the spore before germination. Quantitative interference microscopy has been used to measure the dry mass of various types of cells. Kulfinski and Pappelis (3) recently reviewed how this technique has been applied to plant cells. Technical aspects of interference microscopy have been described by Ross (6).The purpose of this study was to examine the dry mass changes in Diplodia maydis (Berk.) Sacc. with and without germ tubes through the use of interference microscopy.     

The in vivo production of Bacillus popilliae var. rhopaea spores

The effect of various factors on the yield of Bacillus popilliae var. rhopaea spores formed in Rhopaea verreauxi larvae have been studied. Lack of adequate food, temperatures above and below 23°C, and infecting doses above 10⁶ spore larva, all significantly lowered spore yield per larva. Larval age had a pronounced effect; second-instar and young third-instar larvae produ ed about 1 × 10¹⁰ spores while old third-instar larvae produced about 4 × 10¹⁰ spores. Incubation of larvae for longer than 4 weeks did not increase spore yield per larva. Yields were similar whether larvae were infected by injection or per os. Three other host species could be used to mass-produce B. popilliae var. rhopaea spores but all were less efficient than R. verreauxi. Milky third-instar R. verreauxi larvae, which were field collected, yielded 1.57 × 10¹⁰ spores per larva.     

Spore Yield and Microcycle Conidiation of Colletotrichum gloeosporioides in Liquid Culture

The effect of V8 juice concentration (5 to 40%, vol/vol), spore inoculum density (10⁵ and 10⁷ spores per ml), and liquid batch or fed-batch culture condition on mycelium and spore production by Colletotrichum gloeosporioides was evaluated. The amount of mycelium produced, the time required for initiation of sporulation following attainment of maximum mycelium, and the time for attainment of maximum spore concentration increased with increasing V8 juice concentration in batch culture. Cultures containing V8 juice at >10% achieved a similar spore density (apparent spore-carrying capacity) of about 0.8 mg of spores per ml (1 × 10⁷ to 2 × 10⁷ spores per ml) independent of inoculum density and V8 juice concentration. The relative spore yield decreased from a high of 64% of the total biomass for the low-inoculum 5% V8 culture, through 13% for the analogous 40% V8 culture, to a low of 2% for the high-inoculum 27% V8 culture. Fed-batch cultures were used to establish conditions of high spore density and low substrate availability but high substrate flux. The rate of addition of V8 juice was adjusted to approximate the rate of substrate utilization by the (increasing) biomass. The final spore concentration was about four times higher (3.0 mg of spores per ml) than the apparent spore-carrying capacity in batch culture. This high spore yield was obtained at the expense of greatly reduced mycelium, resulting in a high relative spore yield (62% of the total biomass). Microcycle conidiation occurred in the fed-batch but not batch systems. These data indicate that substrate-limited, fed-batch culture can be used to increase the amount and efficiency of spore production by C. gloeosporioides by maintaining microcycle conidiation conditions favoring allocation of nutrients to spore rather than mycelium production.     

Size matters for violent discharge height and settling speed of Sphagnum spores: important attributes for dispersal potential

Background and Aims

Initial release height and settling speed of diaspores are biologically controlled components which are key to modelling wind dispersal. Most Sphagnum (peat moss) species have explosive spore liberation. In this study, how capsule and spore sizes affect the height to which spores are propelled were measured, and how spore size and spore number of discharged particles relate to settling speed in the aspherical Sphagnum spores.

Methods

Spore discharge and spore cloud development were filmed in a closed chamber (nine species). Measurements were taken from snapshots at three stages of cloud development. Settling speed of spores (14 species) and clusters were timed in a glass tube.

Key Results

The maximum discharge speed measured was 3·6 m s⁻¹. Spores reached a maximum height of 20 cm (average: 15 cm) above the capsule. The cloud dimensions at all stages were related positively to capsule size (R² = 0·58–0·65). Thus species with large shoots (because they have large capsules) have a dispersal advantage. Half of the spores were released as singles and the rest as clusters (usually two to four spores). Single spores settled at 0·84–1·86 cm s⁻¹, about 52 % slower than expected for spherical spores with the same diameters. Settling speed displayed a positive curvilinear relationship with spore size, close to predictions by Stokes'' law for spherical spores with 68 % of the actual diameters. Light-coloured spores settled slower than dark spores. Settling speed of spore clusters agrees with earlier studies. Effective spore discharge and small, slowly settling spores appear particularly important for species in forested habitats.

Conclusions

The spore discharge heights in Sphagnum are among the greatest for small, wind-dispersed propagules. The discharge heights and the slow settling of spores affect dispersal distances positively and may help to explain the wide distribution of most boreal Sphagnum species.     

Investigation of the electrostatic charge of basidiospores of the Phellinus igniarius group

The polarity and magnitude of primary electric charges carried by basidiospores in the airborne state were investigated in living fungal fruiting bodies under natural forest conditions using a portable experimental device designed by the author. The operating principle was the falling of spores in the homogeneous horizontal electric field. The vertical and horizontal components of the trajectories of the spores were determined according to their deposition sites on electrodes (vertical metal plates). Altogether 33 samples of spores were examined for polarity, 10 of these samples (with 10⁴–10⁶ spores per sample) also were used to calculate the mean spore charge-to-mass quotient and the mean spore charge. The detection limits of spore charge-to-mass quotient varied in the range from (4.9±2.3)×10^?5 to (1.36±0.33)×10^?4 C kg^?1. Basidiospores (subglobose, smooth, diameter of 4–6 μm) of the closely related (sibling) species Phellinus alni, P. nigricans, P. populicola and P. tremulae (Hymenochaetales, Basidiomycota) carried positive electrical charges that have mean values from 48 to 305 elementary charges. The intraspecies variation of the spore charge could depend on the natural variation in spore size.     

Recovery of Spores from Thermophilic Dairy Bacilli and Effects of Their Surface Characteristics on Attachment to Different Surfaces

Spores from four Geobacillus spp. were isolated from a milk powder manufacturing line in New Zealand. Liquid sporulation media produced spore yields of ~10⁷ spores ml⁻¹; spores were purified using a two-phase system created with polyethylene glycol 4000 and 3 M phosphate buffer. The zeta potentials of the spores from the four isolates ranged from −10 to −20 mV at neutral pH, with an isoelectric point between pH 3 and 4. Through contact angle measurements, spores were found to be hydrophilic and had relative hydrophobicity values of 10 to 40%, as measured by the microbial adhesion to hexadecane assay. The most hydrophilic spore isolate with the smallest negative charge attached in the highest numbers to Thermanox and stainless steel (1 × 10⁴ spores cm⁻²), with fewer spores attaching to glass (3 × 10³ spores cm⁻²). However, spores produced by the other three strains attached in similar numbers (P > 0.05) to all substrata (~1 × 10³ spores cm⁻²), indicating that there was no simple relationship between individual physicochemical interactions and spore adherence. Therefore, surface modifications which limit the attachment of one strain may not be effective for all stains, and control regimens need to be devised with reference to the characteristics of the particular strains of concern.