A fast, simple, and reliable high-yielding method for DNA extraction from different plant species

Genetic studies and pathogen detection in plants using molecular methods require the isolation of DNA from a large number of samples in a short time span. A rapid and versatile protocol for extracting high-quality DNA from different plant species is described. This method yields from 1 to 2 mg of DNA per gram of tissue. The absorbance ratios (A₂₆₀/A₂₈₀) obtained ranged from 1.6 to 2.0. A minimal presence of contaminating metabolites (as polymerase chain reaction [PCR] inhibitors) in samples and a considerable savings in reagents are characteristics of this protocol, as well as the low cost of the analysis per sample. The quality of the DNA was suitable for PCR amplification.     

DNA isolation protocol for the medicinal plant lemon balm (Melissa officinalis, Lamiaceae)

Lemon balm (Melissa officinalis) is a medicinal plant that is widely used as a sedative or calmant, spasmolytic and antibacterial agent and sleep aid. This has led to a high demand for lemon balm products, resulting in the extinction of this species in some of its natural habitats. Molecular techniques have increasingly been used in plant diversity conservation and isolation of PCR amplifiable genomic DNA is an important pre-requisite. Lemon balm contains high levels of polyphenols and polysaccharides, which pose a major challenge for the isolation of high-quality DNA. We compared different genomic DNA extraction protocols, including traditional phenol-chloroform DNA extraction protocols and two commercial kits for DNA purification for their ability to produce good-quality DNA from fresh leaves of five lemon balm genotypes. Quality and quantity of the DNA samples were determined using 0.8% agarose gel electrophoresis and a spectrophotometer. The DNA purity was further confirmed by PCR amplification using barley retrotransposon LTR base primers. The spectral quality of DNA as measured by the A(260)/A(280) ratio ranged from 1.46 to 2.37. The Fermentase genomic DNA purification kit and the CTAB extraction protocol using PVP and ammonium acetate to overcome the high levels of polyphenols and polysaccharides yielded high-quality DNA with a mean A(260)/A(280) ratio of 1.87. The quantity of DNA and its PCR purity were similar with all the protocols, but considering the time and cost required for extraction of DNA from a large number of samples, the CTAB protocol using PVP and ammonium acetate is suitable for lemon balm.     

A high-throughput protocol for extracting high-purity genomic DNA from plants and animals

DNA extraction techniques that employ the reversible binding of DNA to silica via chaotropic salts can deliver high-quality genomic DNA from plant and animal tissues, while avoiding the use of toxic organic solvents. Existing techniques that use this method are either prohibitively expensive, or are applicable to only a restricted set of taxa. Here we describe a cost-effective DNA extraction technique suitable for a wide range of plant and animal taxa that yields microgram quantities of high-molecular-weight genomic DNA at a throughput of 192 samples per day. Our technique is particularly robust for tissue samples that are insoluble or are rapidly discoloured or oxidized in standard DNA extraction buffers. We demonstrate the quality of DNA extracted using this method by applying the amplified fragment length polymorphism technique to plant species.     

Amplification of cox2 (approximately 620 bp) from 2 mg of up to 129 years old herbarium specimens, comparing 19 extraction methods and 15 polymerases

During the past years an increasing number of studies have focussed on the use of herbarium specimens for molecular phylogenetic investigations and several comparative studies have been published. However, in the studies reported so far usually rather large amounts of material (typically around 100 mg) were sampled for DNA extraction. This equals an amount roughly equivalent to 8 cm(2) of a medium thick leaf. For investigating the phylogeny of plant pathogens, such large amounts of tissue are usually not available or would irretrievably damage the specimens. Through systematic comparison of 19 DNA extraction protocols applied to only 2 mg of infected leaf tissue and testing 15 different DNA polymerases, we could successfully amplify a mitochondrial DNA region (cox2; approximately 620 bp) from herbarium specimens well over a hundred years old. We conclude that DNA extraction and the choice of DNA polymerase are crucial factors for successful PCR amplification from small samples of historic herbarium specimens. Through a combination of suitable DNA extraction protocols and DNA polymerases, only a fraction of the preserved plant material commonly used is necessary for successful PCR amplification. This facilitates the potential use of a far larger number of preserved specimens for molecular phylogenetic investigation and provides access to a wealth of genetic information in preserved in specimens deposited in herbaria around the world without reducing their scientific or historical value.     

Comparing DNA Extraction Methods for Analysis of Botanical Materials Found in Anti-Diabetic Supplements

A comparative performance evaluation of DNA extraction methods from anti-diabetic botanical supplements using various commercial kits was conducted, to determine which produces the best quality DNA suitable for PCR amplification, sequencing and species identification. All plant materials involved were of suboptimal quality showing various levels of degradation and therefore representing real conditions for testing herbal supplements. Eight different DNA extraction methods were used to isolate genomic DNA from 13 medicinal plant products. Two methods for evaluation, DNA concentration measurements that included absorbance ratios as well as PCR amplifiability, were used to determine quantity and quality of extracted DNA. We found that neither DNA concentrations nor commonly used UV absorbance ratio measurements at A ₂₆₀/A ₂₈₀ between 1.7 and 1.9 are suitable for globally predicting PCR success in these plant samples, and that PCR amplifiablity itself was the best indicator of extracted product quality. However, our results suggest that A ₂₆₀/A ₂₈₀ ratios below about 1.3 and above 2.3 indicated a DNA quality too poor to amplify. Therefore, A ₂₆₀/A ₂₈₀ measurements are not useful to identify samples that likely will amplify but can be used to exclude samples that likely will not amplify reducing the cost for unnecessarily subjecting samples to PCR. The two Nucleospin^® plant II kit extraction methods produced the most pure and amplifiable genomic DNA extracts. Our results suggest that there are clear, discernable differences between extraction methods for low quality plant samples in terms of producing contamination-free, high-quality genomic DNA to be used for further analysis.     

Amplification of cox2 (～620 bp) from 2 mg of Up to 129 Years Old Herbarium Specimens,Comparing 19 Extraction Methods and 15 Polymerases

During the past years an increasing number of studies have focussed on the use of herbarium specimens for molecular phylogenetic investigations and several comparative studies have been published. However, in the studies reported so far usually rather large amounts of material (typically around 100 mg) were sampled for DNA extraction. This equals an amount roughly equivalent to 8 cm² of a medium thick leaf. For investigating the phylogeny of plant pathogens, such large amounts of tissue are usually not available or would irretrievably damage the specimens. Through systematic comparison of 19 DNA extraction protocols applied to only 2 mg of infected leaf tissue and testing 15 different DNA polymerases, we could successfully amplify a mitochondrial DNA region (cox2; ∼620 bp) from herbarium specimens well over a hundred years old. We conclude that DNA extraction and the choice of DNA polymerase are crucial factors for successful PCR amplification from small samples of historic herbarium specimens. Through a combination of suitable DNA extraction protocols and DNA polymerases, only a fraction of the preserved plant material commonly used is necessary for successful PCR amplification. This facilitates the potential use of a far larger number of preserved specimens for molecular phylogenetic investigation and provides access to a wealth of genetic information in preserved in specimens deposited in herbaria around the world without reducing their scientific or historical value.     

Detection of plant genes using a rapid, nonorganic DNA purification method

We have developed a simple procedure for the preparation of plant genomic DNA using FTA paper. Plant leaves were crushed against FTA paper, and the genomic DNA was purified using simple, nonorganic reagents. The 18S rRNA gene and the gene encoding the ribulose-1, 5-bisphosphate carboxylase/oxygenase large subunit (rbcL) from the chloroplast genome were detected by PCR amplification of DNA on FTA paper. DNA amplification was successful using extracts from 16 dicot and monocot plants. Studies of specific plant extracts revealed that extracts of leaf samples could be collected and stored at room temperature on FTA paper without a decrease in the DNA amplification success rate for more than a month. Both the 18S RNA gene and the rbcL gene were detected in the genomic DNA isolated from various soybean cultivars stored in this manner. Furthermore, by modestly increasing the number of cycles of DNA amplification, we were able to detect the uidA gene in transgenic tobacco and rice leaves as well as a single copy gene linked to the resistance gene of cyst nematode race 3 using genomic DNA isolated on FTA paper. These results demonstrate that genomic DNA isolated using FTA paper can be used for the detection of plant genes, from a wide range of plants with either high or low gene copy number and of either nuclear or cytoplasmic origin.     

Copy number and loss of heterozygosity detected by SNP array of formalin-fixed tissues using whole-genome amplification

The requirement for large amounts of good quality DNA for whole-genome applications prohibits their use for small, laser capture micro-dissected (LCM), and/or rare clinical samples, which are also often formalin-fixed and paraffin-embedded (FFPE). Whole-genome amplification of DNA from these samples could, potentially, overcome these limitations. However, little is known about the artefacts introduced by amplification of FFPE-derived DNA with regard to genotyping, and subsequent copy number and loss of heterozygosity (LOH) analyses. Using a ligation adaptor amplification method, we present data from a total of 22 Affymetrix SNP 6.0 experiments, using matched paired amplified and non-amplified DNA from 10 LCM FFPE normal and dysplastic oral epithelial tissues, and an internal method control. An average of 76.5% of SNPs were called in both matched amplified and non-amplified DNA samples, and concordance was a promising 82.4%. Paired analysis for copy number, LOH, and both combined, showed that copy number changes were reduced in amplified DNA, but were 99.5% concordant when detected, amplifications were the changes most likely to be 'missed', only 30% of non-amplified LOH changes were identified in amplified pairs, and when copy number and LOH are combined ～50% of gene changes detected in the unamplified DNA were also detected in the amplified DNA and within these changes, 86.5% were concordant for both copy number and LOH status. However, there are also changes introduced as ～20% of changes in the amplified DNA are not detected in the non-amplified DNA. An integrative network biology approach revealed that changes in amplified DNA of dysplastic oral epithelium localize to topologically critical regions of the human protein-protein interaction network, suggesting their functional implication in the pathobiology of this disease. Taken together, our results support the use of amplification of FFPE-derived DNA, provided sufficient samples are used to increase power and compensate for increased error rates.     

Optimization of a high-throughput CTAB-based protocol for the extraction of qPCR-grade DNA from rumen fluid, plant and bacterial pure cultures

The quality and yield of extracted DNA are critical for the majority of downstream applications in molecular biology. Moreover, molecular techniques such as quantitative real-time PCR (qPCR) are becoming increasingly widespread; thus, validation and cross-laboratory comparison of data require standardization of upstream experimental procedures. DNA extraction methods depend on the type and size of starting material(s) used. As such, the extraction of template DNA is arguably the most significant variable when cross-comparing data from different laboratories. Here, we describe a reliable, inexpensive and rapid method of DNA purification that is equally applicable to small or large scale or high-throughput purification of DNA. The protocol relies on a CTAB-based buffer for cell lysis and further purification of DNA with phenol : chloroform : isoamyl alcohol. The protocol has been used successfully for DNA purification from rumen fluid and plant cells. Moreover, after slight alterations, the same protocol was used for large-scale extraction of DNA from pure cultures of Gram-positive and Gram-negative bacteria. The yield of the DNA obtained with this method exceeded that from the same samples using commercial kits, and the quality was confirmed by successful qPCR applications.     

Single nucleotide polymorphism (SNP) allele frequency estimation in DNA pools using Pyrosequencing

Identifying the genetic variation underlying complex disease requires analysis of many single nucleotide polymorphisms (SNPs) in a large number of samples. Several high-throughput SNP genotyping techniques are available; however, their cost promotes the use of association screening with pooled DNA. This protocol describes the estimation of SNP allele frequencies in pools of DNA using the quantitative sequencing method Pyrosequencing (PSQ). PSQ is a relatively recently described high-throughput method for genotyping, allele frequency estimation and DNA methylation analysis based on the detection of real-time pyrophosphate release during synthesis of the complementary strand to a PCR product. The protocol involves the following steps: (i) quantity and quality assessment of individual DNA samples; (ii) DNA pooling, which may be undertaken at the pre- or post-PCR stage; (iii) PCR amplification of PSQ template containing the variable sequence region of interest; and (iv) PSQ to determine the frequency of alleles at a particular SNP site. Once the quantity and quality of individual DNA samples has been assessed, the protocol usually requires a few days for setting up pre-PCR pools, depending on sample number. After PCR amplification, preparation and analysis of PCR amplicon by PSQ takes 1 h per plate.     

Proxy comparison in ancient peat sediments: pollen,macrofossil and plant DNA

We compared DNA, pollen and macrofossil data obtained from Weichselian interstadial (age more than 40 kyr) and Holocene (maximum age 8400 cal yr BP) peat sediments from northern Europe and used them to reconstruct contemporary floristic compositions at two sites. The majority of the samples provided plant DNA sequences of good quality with success amplification rates depending on age. DNA and sequencing analysis provided five plant taxa from the older site and nine taxa from the younger site, corresponding to 7% and 15% of the total number of taxa identified by the three proxies together. At both sites, pollen analysis detected the largest (54) and DNA the lowest (10) number of taxa, but five of the DNA taxa were not detected by pollen and macrofossils. The finding of a larger overlap between DNA and pollen than between DNA and macrofossils proxies seems to go against our previous suggestion based on lacustrine sediments that DNA originates principally from plant tissues and less from pollen. At both sites, we also detected Quercus spp. DNA, but few pollen grains were found in the record, and these are normally interpreted as long-distance dispersal. We confirm that in palaeoecological investigations, sedimentary DNA analysis is less comprehensive than classical morphological analysis, but is a complementary and important tool to obtain a more complete picture of past flora.     

Differential effect of sample preservation methods on plant and arbuscular mycorrhizal fungal DNA

A wide range of methods are commonly used for preserving environmental samples prior to molecular analyses. However, the effect of these preservation methods on fungal DNA is not understood. The objective of this study was to test the effect of eight different preservation methods on the quality and yield of DNA extracted from Bromus inermis and Daucus carota roots colonized by the arbuscular mycorrhizal (AM) fungus, Glomus intraradices. The total DNA concentration in sample extracts was quantified using spectrophotometry. Samples that were frozen (− 80 ºC and − 20 ºC), stored in 95% ethanol, or silica gel dried yielded total (plant and fungal) DNA concentrations that were not significantly different from fresh samples. In contrast, samples stored in CTAB solution or freeze-dried resulted in significantly reduced DNA concentrations compared with fresh samples. The preservation methods had no effect on the purity of the sample extracts for both plant species. However, the DNA of the dried samples (silica gel dried, freeze-dried, heat dried) appeared to be slightly more degraded compared with samples that remained hydrated (frozen, stored in ethanol or CTAB solutions) during storage when visualized on a gel. The concentration of AM fungal DNA in sample extracts was quantified using TaqMan real time PCR. Methods that preserved samples in hydrated form had similar AM fungal DNA concentrations as fresh samples, except D. carota samples stored in ethanol. In contrast, preservation methods that involved drying the samples had very low concentrations of AM fungal DNA for B. inermis, and nearly undetectable for D. carota samples. The drying process appears to be a major factor in the degradation of AM fungal DNA while having less of an impact on plant DNA. Based on these results, samples that need to be preserved prior to molecular analysis of AM fungi should be kept frozen to minimize the degradation of plant and AM fungal DNA.     

Complete Genes May Pass from Food to Human Blood

Our bloodstream is considered to be an environment well separated from the outside world and the digestive tract. According to the standard paradigm large macromolecules consumed with food cannot pass directly to the circulatory system. During digestion proteins and DNA are thought to be degraded into small constituents, amino acids and nucleic acids, respectively, and then absorbed by a complex active process and distributed to various parts of the body through the circulation system. Here, based on the analysis of over 1000 human samples from four independent studies, we report evidence that meal-derived DNA fragments which are large enough to carry complete genes can avoid degradation and through an unknown mechanism enter the human circulation system. In one of the blood samples the relative concentration of plant DNA is higher than the human DNA. The plant DNA concentration shows a surprisingly precise log-normal distribution in the plasma samples while non-plasma (cord blood) control sample was found to be free of plant DNA.     

Degradation and transformability of DNA from transgenic leaves

The fate of transplastomic (chloroplast genome contains the transgene) tobacco plant DNA in planta was studied when the plant leaves were subjected to decay conditions simulating those encountered naturally, including grinding, incubation with cellulase or enzymes produced by Erwinia chrysanthemi, and attack by the plant pathogen Ralstonia solanacearum. Direct visualization of DNA on agarose gels, gene extraction yield (the number of amplifiable aadA sequences in extracted plant DNA), and the frequency that recipient bacteria can be transformed by plant DNA were used to evaluate the quality and quantity of plant DNA and the transgene. These measurements were used to monitor the physical and biological degradation of DNA inside decaying plant tissues. Our results indicate that while most of the DNA will be degraded inside plant cells, sufficient DNA persists to be released into the soil.     

The use of fluorescein for labeling genomic probes in the checkerboard DNA-DNA hybridization method

Molecular methods that permit the simultaneous detection and quantification of a large number of microbial species are currently employed in the evaluation of complex ecosystems. The checkerboard DNA-DNA hybridization technique enables the simultaneous identification of distinct bacterial species in a large number of dental samples. The original technique employed digoxigenin-labeled whole genomic DNA probes which were detected by chemiluminescence. In this study, we present an alternative protocol for labeling and detecting whole genomic DNA probes in the Checkerboard DNA-DNA hybridization method. Whole genomic DNA was extracted from five bacterial species and labeled with fluorescein. The fluorescein labeled whole genomic DNA probes were hybridized against whole genomic DNA or subgingival plaque samples in a checkerboard hybridization format, followed by chemiluminescent detection. Our results reveal that fluorescein is a viable and adequate alternative labeling reagent to be employed in the checkerboard DNA-DNA hybridization technique.     

A rapid and inexpensive method for isolation of total DNA from dehydrated plant tissue

We describe an inexpensive method for dehydration of plant tissue and extraction of high molecular weight DNA. Tissue is dried for 12 to 24 hours in a food dehydrator and subsequently powdered for DNA extraction. Dicot tissue can be powdered in centrifuge tubesen masse using a commercial paint mixer and glass beads. With the use of the paint mixer, tissue never touches common surfaces that might lead to cross contamination, a potential benefit when the DNA is to be used for PCR reactions. The DNA is of a quality equal to that obtained from either lyophilized or fresh frozen tissue (commonly used in many labs). The advantages of the described procedure are that it is fast, does not require expensive equipment (e.g., lyophilizer) and can be used in situations where large numbers of samples must be extracted.     

Broad surveys of DNA viral diversity obtained through viral metagenomics of mosquitoes

Viruses are the most abundant and diverse genetic entities on Earth; however, broad surveys of viral diversity are hindered by the lack of a universal assay for viruses and the inability to sample a sufficient number of individual hosts. This study utilized vector-enabled metagenomics (VEM) to provide a snapshot of the diversity of DNA viruses present in three mosquito samples from San Diego, California. The majority of the sequences were novel, suggesting that the viral community in mosquitoes, as well as the animal and plant hosts they feed on, is highly diverse and largely uncharacterized. Each mosquito sample contained a distinct viral community. The mosquito viromes contained sequences related to a broad range of animal, plant, insect and bacterial viruses. Animal viruses identified included anelloviruses, circoviruses, herpesviruses, poxviruses, and papillomaviruses, which mosquitoes may have obtained from vertebrate hosts during blood feeding. Notably, sequences related to human papillomaviruses were identified in one of the mosquito samples. Sequences similar to plant viruses were identified in all mosquito viromes, which were potentially acquired through feeding on plant nectar. Numerous bacteriophages and insect viruses were also detected, including a novel densovirus likely infecting Culex erythrothorax. Through sampling insect vectors, VEM enables broad survey of viral diversity and has significantly increased our knowledge of the DNA viruses present in mosquitoes.     

Extraction of PCR-quality plant and microbial DNA from total rumen contents

DNA from rumen digesta has several diagnostic applications such as studying microbial community dynamics, transgene/DNA stability, and population typing of various rumen bacteria. Several DNA extraction procedures are described in the literature for rumen digesta, which describe the removal of tannins, polysaccharides, and other PCR inhibitors. Some of these protocols are time-consuming and impractical when handling a large number of samples routinely. Here we describe a rapid method for the extraction of PCR-quality plant and microbial DNA from total rumen contents that is based on modifications in the cetyltrimethylammonium bromide procedure followed by cleanup using a Qiagen column. This procedure is highly reproducible and relatively short, once the initial grinding of the samples is performed, and it consistently yields PCR-quality DNA.     

Characterisation of insect and plant origins using DNA extracted from small volumes of bee honey

A DNA-based tool was validated that potentially enables the characterisation of both plant and insect of origin of small (approximately 1 ml) samples of bee honey. Using this method, mitochondrial, nuclear and chloroplast DNA (mtDNA, nuDNA, cpDNA) markers were successfully extracted, PCR amplified, and sequenced from a range of honeys, and the relative amount of plant nuDNA and cpDNA, and bee mtDNA in the samples was quantified using quantitative real-time PCR. Short, but taxonomically informative lengths of insect and plant organelle DNA could be routinely recovered from all honey samples tested, and longer organelle, and nuclear DNA sequences can be recovered from many. The data also enabled preliminary characterisation of the quality of these different DNA sources in honey. Although the absolute quantity of the different genetic markers varied considerably between sample, a general trend was observed of insect mtDNA dominating over plant organelle DNA, and with plant nuclear DNA at the lowest levels. Furthermore there was a clear correlation between the plant DNA content and the success of the PCR assays. To maximise successful characterisation of samples, future studies are recommended to focus on the use of organelle markers, and limit the size of PCR amplicons targeted, although with appropriate sample selection and assay optimisation, other approaches may be possible.     

Degradation and Transformability of DNA from Transgenic Leaves

The fate of transplastomic (chloroplast genome contains the transgene) tobacco plant DNA in planta was studied when the plant leaves were subjected to decay conditions simulating those encountered naturally, including grinding, incubation with cellulase or enzymes produced by Erwinia chrysanthemi, and attack by the plant pathogen Ralstonia solanacearum. Direct visualization of DNA on agarose gels, gene extraction yield (the number of amplifiable aadA sequences in extracted plant DNA), and the frequency that recipient bacteria can be transformed by plant DNA were used to evaluate the quality and quantity of plant DNA and the transgene. These measurements were used to monitor the physical and biological degradation of DNA inside decaying plant tissues. Our results indicate that while most of the DNA will be degraded inside plant cells, sufficient DNA persists to be released into the soil.