Decolorization of practical textile industry effluents by white rot fungus Coriolus versicolor IBL-04

Textile industry discharges a vast amount of unused synthetic dyes in effluents. The discharge of these effluents into rivers and lakes leads to a reduction in sunlight penetration in natural water bodies, which, in turn, decreases both photosynthetic activity and dissolved oxygen concentration rendering it toxic to living beings. This paper describes the decolorization potential of a local white rot fungus, Coriolus versicolor IBL-04 for practical industrial effluents collected from five different textile industries of Faisalabad, Pakistan. Screening of C. versicolor IBL-04 on five effluents showed best decolorization results (36.3%) for Arzoo Textile Industry (ART) effluent in 6 days followed by Crescent Textile Industry (CRT), Itmad Textile Industry (ITT), Megna Textile Industry (MGT) and Ayesha Textile Industry (AST) effluents. Optimization of different process parameters for ART effluent decolorization by C. versicolor IBL-04 showed that manganese peroxidase (MnP) (486 U/mL) was the lignolytic enzyme present in the culture filtrates with undetectable lignin peroxidase (LiP) and laccase. The MnP synthesis and effluent decolorization could be enhanced to 725 U/mL and 84.4%, respectively, with a significant time reduction to 3 days by optimizing pH and temperature and using 1% starch as a supplementary carbon source.     

Laccase production by free and immobilized mycelia of Peniophora cinerea and Trametes versicolor: a comparative study

The production of laccase by immobilized mycelia of Peniophora cinerea and Trametes versicolor was studied. In an initial stage, experimental assays were performed in Erlenmeyer flasks using free and immobilized mycelium, and the performance of the fungal strains to produce the enzyme was compared. Both fungi adhered into the support material (a synthetic fiber), growing not only on the surface but also in the interspaces of the fibers. Immobilization of P. cinerea provided a 35-fold increase in laccase production when compared to the production obtained by using free mycelium. On the other hand, immobilization of T. versicolor caused a decrease in laccase activity. A comparison between the strains revealed that immobilized P. cinerea (3,500 U/L) surpassed the enzyme production by free T. versicolor (800 U/L). When the conditions that gave the best laccase production to each fungus were employed in a stirred tank bioreactor, very low laccase production was observed for both the cases, suggesting that shear stress and mycelia damage caused by the agitation impellers negatively affected the enzyme production.     

Hyperactivation and thermostabilization of <Emphasis Type="Italic">Phanerochaete chrysosporium</Emphasis> lignin peroxidase by immobilization in xerogels

This is a continuation of our previous paper on production of lignin peroxidase (LiP) by Phanerochaete chrysosporium in solid substrate fermentation (SSF) medium of corncobs. The enzyme was purified by ammonium sulphate precipitation and ion-exchange fast protein liquid chromatography. Maximum yield of LiP was 13.7 U/gds (units per gram dry substrate) after 5 days of SSF with 70% moisture and 20% (v/w) inoculum. The approximate molecular mass of purified LiP, estimated by sodium dodecyl sulphate-polyacrylamide gel electrophoresis, was 38 kDa. The pH and temperature optima for the LiP were 4 and 40°C, respectively. Immobilization of LiP in hydrophobic xerogels caused hyperactivation of LiP and enhanced its thermostability properties. The K _M and V _max values for immobilized LiP were 10.56 mg/ml and 16.67 μmol/min (120.49 U/mg of protein) as compared to 13 mg/ml and 11.76 μmol/min (85 U/mg of protein), respectively, for free LiP using veratryl alcohol as substrate.     

Convenient one-step purification and immobilization of lipase using a genetically encoded aldehyde tag

To avoid the unwanted and random covalent linkage between the cross-linker and enzyme's active site in covalent immobilization, a genetically encoded “aldehyde tag” was introduced into recombinant lipase and applied for the one-step purification and covalent immobilization of this enzyme. The effects of the immobilization time, temperature and the amount of enzyme were investigated, and the thermo-stability of immobilized lipase was also examined. The specific activity and the k_cat/K_m of the immobilized lipase using aldehyde tag (IL-AT) were 2.50 and 3.02 fold higher, respectively, than those of the traditionally immobilized lipase using glutaraldehyde (IL-GA). The newly immobilized lipase also presented better thermo-stability than the traditionally immobilized one. The results show that the recombinant enzyme could be conveniently immobilized without glutaraldehyde and that the enzyme's active site was well protected. This is a new immobilization method able to avoid glutaraldehyde or 2,4,6-trichloro-1,3,5-triazine as an activating agent. The greener method without hazardous chemicals for the one-step purification and immobilization of an enzyme using a genetically encoded “aldehyde tag” can be exploited for numerous other enzyme purification and immobilization applications.     

A rapid in situ immobilization of d-amino acid oxidase based on immobilized metal affinity chromatography

A rapid in situ immobilization process was developed based on conventional separation technique of immobilized metal affinity chromatography (IMAC) and was studied in the case of d-amino acid oxidase (DAAO) with binding–enhancing Heli-tag (His-Arg-Asn-Tyr-Gly-Gly-Cys-Cys-Gly). A recombinant Escherichia coli strain JM105 (Δase)/pGEMK-R-DAAO-Heli was successfully constructed to synthesize chimeric protein DAAO-Heli. Without additional purification procedure, the tagged enzyme DAAO-Heli could be directly immobilized to EP-IDA-Ni²⁺ support with purity of 90 % and DAAO activity of over 70 U/g support. Experimental results showed that the immobilized DAAO-Heli was 73 times more thermally stable than free enzyme. Besides, it remained 67 % of initial activity after 100 cycles of batch catalysis and its operational stability was improved 36 times than that of the previously IMAC-immobilized DAAO-His. Furthermore, the epoxy (EP) support could be easily recovered and repeatedly used with simple steps, which could reduce the immobilization costs significantly.     

Enhanced decolorization of Solar brilliant red 80 textile dye by an indigenous white rot fungus Schizophyllum commune IBL-06

An indigenously isolated white rot fungus, Schizophyllum commune IBL-06 was used to decolorize Solar brilliant red 80 direct dye in Kirk’s basal salts medium. In initial screening study, the maximum decolorization (84.8%) of Solar brilliant red 80 was achieved in 7 days shaking incubation period at pH 4.5 and 30 °C. Different physical and nutritional factors including pH, temperature and fungal inoculum density were statistically optimized through Completely Randomized Design (CRD), to enhance the efficiency of S. commune IBL-06 for maximum decolorization of Solar brilliant red 80 dye. The effects of inexpensive carbon and nitrogen sources were also investigated. Percent dye decolorization was determined by a reduction in optical density at the wavelength of maximum absorbance (λ_max, 590 nm). Under optimum conditions, the S. commune IBL-06 completely decolorized (100%) the Solar brilliant red 80 dye using maltose and ammonium sulfate as inexpensive carbon and nitrogen sources, respectively in 3 days. S. commune IBL-06 produced the three major ligninolytic enzymes lignin peroxidase (LiP), manganase peroxidase (MnP) and lacaase (Lac) during the decolorization of Solar brilliant red 80. LiP was the major enzyme (944 U/mL) secreted by S. commune IBL-06 along with comparatively lower activities of MnP and Laccase.     

Characterization of a recombinant l-rhamnose isomerase from Dictyoglomus turgidum and its application for l-rhamnulose production

A putative recombinant enzyme from Dictyoglomus turgidum was characterized and immobilized on Duolite A568 beads. The native enzyme was a 46 kDa tetramer. Its activity was highest for l-rhamnose, indicating that it is an l-rhamnose isomerase. The maximum activities of both the free and immobilized enzymes for l-rhamnose isomerization were at pH 8.0 and 75 °C in the presence of Mn²⁺. Under these conditions, the half-lives of the free and immobilized enzymes were 28 and 112 h, respectively. In a packed-bed bioreactor, the immobilized enzyme produced an average of 130 g l-rhamnulose l^?1 from 300 g l-rhamnose l^?1 after 240 h at pH 8.0, 70 °C, and 0.6 h^?1, with a productivity of 78 g l^?1 h^?1 and a conversion yield of 43 %. To the best of our knowledge, this is the first report describing the enzymatic production of l-rhamnulose.     

Immobilization of catalase on cotton fabric oxidized by sodium periodate

Cotton fabric was first oxidized with sodium periodate, and then employed to immobilize catalase. Optimization studies for oxidation of the fabric and immobilization of the enzyme were performed. The properties of the immobilized catalase were examined and compared with those of the free enzyme. A high activity of the immobilized enzyme was obtained when the fabric was oxidized at 40°C and pH 6.0 for 8h in a bath containing 0.20 mol L^?1 sodium periodate and the enzyme was immobilized at 4°C for 24h with a catalase dosage of 120.0 U mL^?1. The immobilized enzyme exhibited optimum activity at 40°C, while the free enzyme had optimal temperature of 30°C, suggesting that the immobilized catalase could be used in a broader temperature range. Both the immobilized and free enzyme had pH optima of 7.0. The staining test and reusability showed that the catalase was fixed covalently on the oxidized cotton fabric.     

Activity of myrosinase from Sinapis alba seeds immobilized into Ca-polygalacturonate as a simplified model of soil-root interface mucigel

Ca-polygalacturonate is a demethoxylated component of pectins which are constitutive of plant root mucigel. In order to define the role of root mucigel in myrosinase immobilization and activity at root level, a myrosinase enzyme which had been isolated from Sinapis alba seeds was immobilized into Ca-polygalacturonate. The activity profile for the immobilized and free enzyme was evaluated using the pH-Stat method as a function of time, temperature, and pH. The Michaelis-Menten kinetic parameters change between the immobilized (V _max ?=?127?±?13 U mg^?1 protein; K _M ?=?6.28?±?0.09?mM) and free (V _max ?=?17?±?1 U mg^?1 protein; K _M ?=?0.96?±?0.01?mM) forms of myrosinase, probably due to conformational changes involving the active site as a consequence of enzyme immobilization. Immobilized enzyme activity evaluated as a function of different substrates gave the highest value with nasturtin, the glucosinolate that is typical of several brassicaceae plant roots containing the glucosinolate-myrosinase defensive system. No feedback regulation mechanism was found in the presence of an excess of enzymatic reaction products (i.e. allyl isothiocyanate or sulphate). The high enzyme immobilization yield into Ca-polygalacturonate and its activity preservation under different conditions suggest that the enzyme released by plants at root level could be entrapped in root mucigel in order to preserve its activity.     

Immobilization of lignin peroxidase on nanoporous gold: Enzymatic properties and in situ release of H2O2 by co-immobilized glucose oxidase

Immobilization of enzymes on porous inorganic materials is very important for biocatalysis and biotransformation. In this paper, nanoporous gold (NPG) was used as a support for lignin peroxidase (LiP) immobilization. NPG with a pore size of 40–50 nm was prepared by dealloying Au/Ag alloy (50:50 wt%) for 17 h. By incubation with LiP aqueous solution, LiP was successfully immobilized on NPG. The optimal temperature of the immobilized LiP was ca. 40, 10 °C higher than that of free LiP. After 2 h incubation at 45 °C, 55% of the initial activity of the immobilized LiP was still retained while the free LiP was completely deactivated. In addition, a high and sustainable LiP activity was achieved via in situ release of H₂O₂ by a co-immobilized glucose oxidase. The present co-immobilization system was demonstrated to be very effective for LiP-mediated dye decolourization.     

Immobilization of β-glucosidase on bifunctional periodic mesoporous organosilicas

The aminopropyl-functionalized ethane-bridged bifunctional periodic mesoporous organosilicas (APEPMOs) were synthesized by the co-condensation of 1,2-bis (triethoxysilyl) ethane and 3-aminopropyltriethoxysilane in the presence of cationic surfactants octadecyltrimethylammonium chloride in basic medium. The pores of the APEPMOs were expanded with N,N-dimethyldecylamine and the pore-expanded materials were utilized as supports for β-glucosidase immobilization. A high enzyme loading of 120 mg per g support was achieved in 18 h, and 95.5 % of enzymatic activity was retained. β-Glucosidases were strongly immobilized on APEPMOs with only 5 % desorption in the washing step with buffer solution. The immobilized enzyme had 75 % activity after 20 batch reactions and had improved thermal stability, relative to the free enzyme. These results demonstrate that APEPMOs would be promising supports for β-glucosidases immobilization.     

Reactive blue 19 decolouration by laccase immobilized on silica beads

Laccase (31.5 U of activity/g or 4.39 μg of protein/m²) from Trametes versicolor was immobilized on controlled-porosity-carrier silica beads and evaluated for the decolouration of Reactive blue 19, an anthraquinone dye. Although there was an initial, rapid adsorption of the dye to the packed bed in a recirculating reactor, about 97.5% of Reactive blue 19 removal was due to enzymatic degradation. The free enzyme lost 52% of its activity in 48 h. However, the activity of the immobilized laccase was unchanged after 4 months of storage in phosphate buffer under ambient conditions followed by three successive decolourations over 120 h. Treating the laccase immobilized beads with ethanolamine reduced dye adsorption by 40%.     

Immobilization of lactoperoxidase on graphene oxide nanosheets with improved activity and stability

Objectives

The purpose of this study was to develop a facile and efficient method to enhance the stability and activity of lactoperoxidase (LPO) by using its immobilization on graphene oxide nanosheets (GO-NS).

Methods

Following the LPO purification from bovine whey, it was immobilized onto functionalized GO-NS using glutaraldehyde as cross-linker. Kinetic properties and stability of free and immobilized LPO were investigated.

Results

LPO was purified 59.13 fold with a specific activity of 5.78 U/mg protein. The successful immobilization of LPO on functionalized GO-NS was confirmed by using dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FT-IR). The overall results showed that the stability of the immobilized LPO was considerably improved compared to free LPO. Apparent K_m and V_max of LPO also indicated that the immobilized enzyme had greater affinity to the substrate than the native enzyme.

Conclusions

Graphene oxide nanosheets are effective means for immobilization of LPO.

     

Immobilization of β-glucosidase from Scytalidium lignicola on Chitosan

Chitosan was found to be a better support than alginate beads for immobilization of β-glucosidase from Scytalidium lignicola. The optimum concentration of glutaraldehyde for enzyme immobilization was 0.2%. Immobolized β-glucosidase was more able in the pH range of 3–6. Immobilized β-glucosidase retained about 70% of its activity at 50%C after 72 h of incubation while free enzyme lost most of its activity. The log of activity retained vs time was a straight line with free enzyme but was curved for immnobilized enzyme. Lineweaver-Burk plots of free and immoblized β-glucosidase gave K_m values of 2 × 10⁻⁴ M and 5.5 × 10⁻⁴ M for p-nitrophenyl β-d-glucopyranoside, respectively. Addition of immobilized β-glucosidase to a saccharification system gave a 30% increase in reducing sugar availability compared to free enzyme addition and was at least 4 times reusable without appreciable loss in enzyme activity.     

Catalytic properties of the immobilized Aspergillus tamarii xylanase

Xylanase from Aspergillus tamarii was covalently immobilized on Duolite A147 pretreated with the bifunctional agent glutaraldehyde. The bound enzyme retained 54.2% of the original specific activity exhibited by the free enzyme (120 U/mg protein). Compared to the free enzyme, the immobilized enzyme exhibited lower optimum pH, higher optimum reaction temperature, lower energy of activation, higher K_m (Michaelis constant), lower V_max (maximal reaction rate). The half-life for the free enzyme was 186.0, 93.0, and 50.0 min for 40, 50, and 60°C, respectively, whereas the immobilized form at the same temperatures had half-life of 320, 136, and 65 min. The deactivation rate constant at 60°C for the immobilized enzyme is about 6.0 × 10⁻³, which is lower than that of the free enzyme (7.77 × 10⁻³ min). The energy of thermal deactivation was 15.22 and 20.72 kcal/mol, respectively for the free and immobilized enzyme, confirming stabilization by immobilization. An external mass transfer resistance was identified with the immobilization carrier (Duolite A147). The effect of some metal ions on the activity of the free and immobilized xylanase has been investigated. The immobilized enzyme retained about 73.0% of the initial catalytic activity even after being used 8 cycles.     

Changes in oxidative enzyme activity during interspecific mycelial interactions involving the white-rot fungus Trametes versicolor

Interspecific fungal antagonism leads to biochemical changes in competing mycelia, including up-regulation of oxidative enzymes. Laccase, manganese peroxidase (MnP), manganese-repressed peroxidase (MRP) and lignin peroxidase (LiP) gene expression and enzyme activity were compared during agar interactions between Trametes versicolor and five other wood decay fungi resulting in a range of interaction outcomes from deadlock to replacement of one fungus by another. Increased laccase and Mn-oxidising activities were detected at all interaction zones, but there were few changes in activity in regions away from the interaction zone in T. versicolor mycelia compared to self-pairings. Whilst no LiP activity was detected in any pairing, low level LiP gene expression was detected. MnP activity was detected but not expression of MnP genes; instead, MRP could explain the observed activity. No relationship was found between extent of enzyme activity increase and interaction outcome. Similarities between patterns of gene expression and enzyme activity are discussed.     

Controlling the simultaneous production of laccase and lignin peroxidase from Streptomyces cinnamomensis by medium formulation

Background

Use of crude ligninase of bacterial origin is one of the most promising ways to improve the practical biodegradation of lignocellulosic biomass. However, lignin is composed of diverse monolignols with different abundance levels in different plant biomass and requires different proportions of ligninase to realize efficient degradation. To improve activity and reduce cost, the simultaneous submerged fermentation of laccase and lignin peroxidase (LiP) from a new bacterial strain, Streptomyces cinnamomensis, was studied by adopting formulation design, principal component analysis, regression analysis and unconstrained mathematical programming.

Results

The activities of laccase and LiP from S. cinnamomensis cultured with the optimal medium formulations were improved to be five to eight folders of their initial activities, and the measured laccase:LiP activity ratios reached 0.1, 0.4 and 1.7 when cultured on medium with formulations designed to produce laccase:LiP complexes with theoretical laccase:LiP activity ratios of 0.05 to 0.1, 0.5 to 1 and 1.1 to 2.

Conclusion

Both the laccase and LiP activities and also the activity ratio of laccase to LiP could be controlled by the medium formulation as designed. Using a crude laccase-LiP complex with a specially designed laccase:LiP activity ratio has the potential to improve the degradation of various plant lignins composed of diverse monolignols with different abundance levels.     

Immobilization of acidic lipase derived from Pseudomonas gessardii onto mesoporous activated carbon for the hydrolysis of olive oil

Mesoporous activated carbon (MAC) derived from rice husk is used for the immobilization of acidic lipase (ALIP) produced from Pseudomonas gessardii. The purified acidic lipase had the specific activity and molecular weight of 1473 U/mg and 94 kDa respectively. To determine the optimum conditions for the immobilization of lipase onto MAC, the experiments were carried out by varying the time (10–180 min), pH (2–8), temperature (10–50 °C) and the initial lipase activity (49 × 10³, 98 × 10³, 147 × 10³ and 196 × 10³ U/l in acetate buffer). The optimum conditions for immobilization of acidic lipase were found to be: time—120 min; pH 3.5; temperature—30 °C, which resulted in achieving a maximum immobilization of 1834 U/g. The thermal stability of the immobilized lipase was comparatively higher than that in its free form. The free and immobilized enzyme kinetic parameters (K_m and V_max) were found using Michaelis–Menten enzyme kinetics. The K_m values for free enzyme and immobilized one were 0.655 and 0.243 mM respectively. The immobilization of acidic lipase onto MAC was confirmed using Fourier Transform-Infrared Spectroscopy, X-ray diffraction analysis and scanning electron microscopy.     

Pentynyl dextran as a support matrix for immobilization of serine protease subtilisin Carlsberg and its use for transesterification of N-acetyl-l-phenylalanine ethyl ester in organic media

In this study, serine protease (subtilisin Carlsberg) was immobilized on pentynyl dextran (PyD, O–alkynyl ether of dextran, 1) and used for the transesterification of N-acetyl-l-phenylalanine ethyl ester (2) with different aliphatic (1-propanol, 1-butanol, 1-pentanol, 1-hexanol) and aromatic (benzyl alcohol, 2-phenyl ethanol, 4-phenyl-1-butanol) alcohols in tetrahydrofuran (THF). The effect of carbon chain length in aliphatic and aromatic alcohols on initial and average transesterification rate, transesterification activity of immobilized enzyme and yield of the reaction under selected reaction conditions was investigated. The transesterification reactivity of the enzyme and yield of the reaction increased as the chain length of the alcohols decreased. Furthermore, almost no change in yield was observed when the immobilized enzyme was repeatedly used for selected alcohols over six cycles. Intrinsic fluorescence analysis showed that the catalytic activity of the immobilized enzyme in THF was maintained due to retention of the tertiary structure of the enzyme after immobilization on PyD (1).     

Screening,selection and development of Bacillus subtilis apr-IBL04 for hyper production of macromolecule alkaline protease

Bacillus subtilis microbe is commonly found in soil and produces proteases on nitrogen and carbon-containing sources and increases the fertility rate by degrading nitrogenous organic materials. The present study was aimed to develop hyper producing mutant strain of B. subtilis for the production of proteases, to improve the process variables by the response surface methodology (RSM) under central composite design (CCD) and the production of protease by the particular mutant strain in a liquid state fermentation media. The mutation of the strain was carried out using ethidium bromide. Pure B. subtilis strain was collected and screened for hyper-production of protease. The production of protease by mutant B. subtilis strain was optimized by varying temperature, inoculum size, pH and incubation time under liquid state fermentation. The CCD model were found to be reliable with r² of 0.999. The maximum enzyme activity of B. subtilis IBL-04 mutant with 3 mL/100 mL inoculum size, 72 h fermentation time, pH 8, and 45 °C temperature was developed with enzyme activity 631.09 U/mL, indicates 1–7-fold increase in enzyme activity than the parent strain having 82.32 U/mL activity. These characteristics render its potential use in industries for pharmaceutical and dairy formulation.