Discovery of <Emphasis Type="Italic">Ophiostoma tsotsi</Emphasis> on <Emphasis Type="Italic">Eucalyptus</Emphasis> wood chips in China

Ophiostoma species such as O. quercus are the most frequent causal agents of sapstain of freshly felled hardwood timber and pulpwood. Many species are regarded as economically important agents of wood degradation. The aim of this study was to identify a collection of Ophiostoma isolates, resembling O. quercus, found on stained Eucalyptus pulpwood chips in China. DNA sequences of the internal transcribed spacer regions, including the 5.8S region, of the ribosomal DNA, and parts of the β-tubulin and elongation factor-1α genes, revealed that the isolates were not O. quercus. Surprisingly, they represented O. tsotsi, a wound-infesting fungus recently described from hardwoods in Africa. In addition, sequence data from an isolate from agarwood in Vietnam, identified in a previous study as belonging to an unknown Pesotum species, were also shown to represent O. tsotsi. A high level of genetic variability was observed among isolates of both O. quercus and O. tsotsi. This was unexpected and suggests that both species have been present in Asia for a significant amount of time.     

<Emphasis Type="Italic">Bacillus anthracis</Emphasis>, <Emphasis Type="Italic">Francisella tularensis</Emphasis> and <Emphasis Type="Italic">Yersinia pestis</Emphasis>. The most important bacterial warfare agents — <Emphasis Type="Italic">review</Emphasis>

There are three most important bacterial causative agents of serious infections that could be misused for warfare purposes: Bacillus anthracis (the causative agent of anthrax) is the most frequently mentioned one; however, Fracisella tularensis (causing tularemia) and Yersinia pestis (the causative agent of plague) are further bacterial agents enlisted by Centers for Disease Control and Prevention into the category A of potential biological weapons. This review intends to summarize basic information about these bacterial agents. Military aspects of their pathogenesis and the detection techniques suitable for field use are discussed.     

Habitat,density, and spatial distribution of <Emphasis Type="Italic">Rivulus giarettai</Emphasis> (<Emphasis Type="Italic">Actinopterygii</Emphasis>, <Emphasis Type="Italic">Cyprinodontiformes</Emphasis>) in southeastern Brazil

We present data on the habitat, density, and spatial distribution of Rivulus giarettai, and discuss some biotic and abiotic variables related to its abundance in Free Flowing Waters (FFW) and Dam Reservoirs (DR) in palm grove (Mauritia flexuosa) marshes (Veredas) in Uberlandia, Minas Gerais, southeastern Brazil. The mean density (individuals/plot) of R. giarettai was about 13 times higher in FFW than in DR. In FFW, the density of R. giarettai was highest at intermediate amounts of substrate (plant mass) and it was positively rank-correlated with the depth, and the number of arthropods. Individuals occurred in an aggregated distribution. The aggregated pattern could be related to a concentration of individuals in microhabitats neither too much exposed nor completely saturated by plants. R. giarettai was relatively abundant and tolerant to slight man-made habitat modifications. Damming appeared to be especially problematic by negatively affecting its density.     

Selection perspectives for genetic improvement of wood stiffness in hybrid larch (<Emphasis Type="Italic">Larix</Emphasis> x <Emphasis Type="Italic">eurolepis</Emphasis> Henry)

Genetic variability of modulus of elasticity (MOE) was investigated in three genetic trials, including two progeny (16 years old) and one clonal (19 years old) trials of hybrid larch (Larix x eurolepis Henry). MOE was directly assessed on standing trees using the Rigidimeter, a bending device, and related to other traits including height, BH diameter and wood density. Mean MOE ranged from 5,183 to 9,228 MPa among families in the progeny trials and from 4,591 to 11,486 MPa in the clonal trial. Among traits studied, MOE was one of the most variable traits. It was strongly and positively related to wood density at both the individual and genotype mean levels. Interestingly too, wood stiffness did not seem, or only weakly, unfavourably linked to stem diameter at the phenotypical level, but it was negatively or not correlated to diameter at the genetic level. As well, MOE showed a high GxE stability over the two progeny trial sites. Narrow-sense heritabilities for MOE were moderate (around 0.36). In all three trials, they were lower than those for wood density or total height, and of the same level as for diameter. Improvement of wood stiffness of hybrid larch using the Rigidimeter seems possible and promising genetic gains are expected. Impacts of selection for growth traits on MOE are also discussed.     

Structural characteristics of the chloroplast <Emphasis Type="Italic">rpS16</Emphasis> intron in <Emphasis Type="Italic">Allium sativum</Emphasis> and related <Emphasis Type="Italic">Allium</Emphasis> species

The intron sequence of chloroplast rpS16 and the secondary structure of its pre-mRNA were characterized for the first time in 26 Allium sativum accessions of different ecologo-geographical origins and seven related Allium species. The boundaries and main stem-loop consensus sequences were identified for all six domains of the intron. Polymorphism was estimated for the total intron and its regions. The structural regions of the rpS16 intron proved to be heterogeneous for mutation rate and spectrum. Mutations were most abundant in domains II and IV, and transition predominated in domains I, III, V, and VI. In addition to structural elements and motifs typical for group IIB introns, several Allium-specific micro- and macrostructural mutations were revealed. A 290-bp deletion involving domains III and IV and part of domain V was observed in A. altaicum, A. fistulosum, and A. schoenoprasum. Several indels and nucleotide substitutions were found to cause a deviation of the pre-mRNA secondary structure from the consensus model of group II introns.     

Interaction of <Emphasis Type="Italic">Bdellovibrio bacteriovorus</Emphasis> with bacteria <Emphasis Type="Italic">Campylobacter jejuni</Emphasis> and <Emphasis Type="Italic">Helicobacter pylori</Emphasis>

Interaction of Bdellovibrio bacteriovorus 100NCJB with bacteria Campylobacter jejuni (strains 1, 2, 3, 4, and 5) and Helicobacter pylori, strain TX30a, was confirmed. The results indicate that lytic activity of bdellovibrios both in liquid media and cells attached to a surface was observed. The potential use of the antimicrobial activity of predatory bacteria for environmental bioprotection and public health is discussed.     

Effects of sugars and growth regulators on <Emphasis Type="Italic">in vitro</Emphasis> growth of <Emphasis Type="Italic">Dactylorhiza</Emphasis> species

The influence of sugars and growth regulators on shoot and root growth of Dactylorhiza species was studied under in vitro conditions. The seedling development was stimulated with the application of glucose and sucrose at concentration of 10 g dm⁻³ each. The improvement of shoot growth rate and shoot length was enhanced by cytokinins N ⁶-(2-isopentenyl)adenine or N ⁶-benzyladenine and their combination with auxin indolebutyric acid (IBA). The root growth rate and root length of seedlings increased in the presence of IBA and α-naphthaleneacetic acid. Individual Dactylorhiza species showed statistically significant differences in shoot and root development depending on sugar and growth regulator combinations.     

Main trends in the genetic transformation of <Emphasis Type="Italic">Populus</Emphasis> species

The main advantages that could be obtained by poplar plantation production were described in this review. We also described the significance of poplars for industry and for solutions to ecological problems. Taking into consideration the results obtained by genetic engineering methods, we analyzed the trends in the improvement of the Populus phenotypes related to the resistance to biotic and abiotic stresses and herbicides, as well as to the modification of the wood quality (decreasing or modifing the lignin content), phytoremediation, plant growth acceleration, and changes in the plant morphology.     

Frequencies of the <Emphasis Type="Italic">DRB1</Emphasis>, <Emphasis Type="Italic">DQA1</Emphasis>, <Emphasis Type="Italic">DQB1</Emphasis> and <Emphasis Type="Italic">TNFA</Emphasis> alleles in immigrant population of west Siberia

Based on population analysis of the DRB1, DQA1, DQB1 and TNFA allele frequency distribution patterns, regional features of immunogenetic structure of the population of West Siberia were investigated. Statistically significant linkage disequilibrium within the HLA class II region, as well as between the TNFA and DRB1, DQA1, and DQB1 was demonstrated. Population frequency distribution patterns of two- and multilocus haplotypes were examined.     

Mapping species differences for adventitious rooting in a <Emphasis Type="Italic">Corymbia torelliana</Emphasis> × <Emphasis Type="Italic">Corymbia citriodora</Emphasis> subspecies <Emphasis Type="Italic">variegata</Emphasis> hybrid

Quantitative trait loci (QTL) detection was carried out for adventitious rooting and associated propagation traits in a second-generation outbred Corymbia torelliana × Corymbia citriodora subspecies variegata hybrid family (n = 186). The parental species of this cross are divergent in their capacity to develop roots adventitiously on stem cuttings and their propensity to form lignotubers. For the ten traits studied, there was one or two QTL detected, with some QTL explaining large amounts of phenotypic variation (e.g. 66% for one QTL for percentage rooting), suggesting that major effects influence rooting in this cross. Collocation of QTL for many strongly genetically correlated rooting traits to a single region on linkage group 12 suggested pleiotropy. A three locus model was most parsimonious for linkage group 12, however, as differences in QTL position and lower genetic correlations suggested separate loci for each of the traits of shoot production and root initiation. Species differences were thought to be the major source of phenotypic variation for some rooting rate and root quality traits because of the major QTL effects and up to 59-fold larger homospecific deviations (attributed to species differences) relative to heterospecific deviations (attributed to standing variation within species) evident at some QTL for these traits. A large homospecific/heterospecific ratio at major QTL suggested that the gene action evident in one cross may be indicative of gene action more broadly in hybrids between these species for some traits.     

Presence of <Emphasis Type="Italic">C. albidus</Emphasis>, <Emphasis Type="Italic">C. laurentii</Emphasis> and <Emphasis Type="Italic">C. uniguttulatus</Emphasis> in Crop and Droppings of Pigeon Lofts (<Emphasis Type="Italic">Columba livia</Emphasis>)

Columba livia is an important reservoir and carrier of Cryptococcus neoformans, Cryptococcus uniguttulatus, Cryptococcus laurentii and Cryptococcus albidus. Upper digestive tract of this species is also known as a habitat for Cryptococcus neoformans. Given the increasing clinical interest of this microorganism, 331 swabs from crop and 174 dropping samples from pigeon lofts in Grand Canary Island have been studied. The obtained results show an extensive presence samples 81 positive (24.47%) of Cryptococcus spp. in analysed crops: 32 (9.66%) for C. neoformans, 24 (7.2%) for C. uniguttulatus, 23 (6.9%) for C. albidus and 2 (0.6%) for C. laurentii. In the same way, Cryptococcus spp was also isolated in 82 (47.13%), dropping samples: C. neoformans in 59 (33.9%), C. uniguttulatus, in 9 (5.17%), C. laurentii in 8 (4.59%) and C. albidus in 6 (3.44%) of the investigated samples, respectively. The cryptococcosis produced by species of cryptococci other than C. neoformans has become more important during the last decade, supporting the study on the role of pigeon in the epidemiology of this disease.