Applying the Taguchi Design for Optimized Formulation of Sustained Release Gliclazide Chitosan Beads: An In Vitro/In Vivo Study

Gliclazide is a second generation of hypoglycemic sulfonylurea and acts selectively on pancreatic β cell to control diabetes mellitus. The objective of this study was to produce a controlled release system of gliclazide using chitosan beads. Chitosan beads were produced by dispersion technique using tripolyphosphate (TPP) as gelating agent. The effects of process variables including chitosan molecular weight, concentration of chitosan and TPP, pH of TPP, and cross-linking time after addition of chitosan were evaluated by Taguchi design on the rate of drug release, mean release time (MRT), release efficiency (RE₈%), and particle size of the beads. The blood glucose lowering effect of the beads was studied in normal and streptozotocin-diabetic rats. The optimized formulation CL₂T₅P₂t₁₀ with about 31% drug loading, 2.4 h MRT, and 69.16% RE₈% decreased blood glucose level in normal rats for 24 h compared to pure powder of gliclazide that lasted for just 10 h.     

Formulation,High Throughput In Vitro Screening and In Vivo Functional Characterization of Nanoemulsion-Based Intranasal Vaccine Adjuvants

Vaccine adjuvants have been reported to induce both mucosal and systemic immunity when applied to mucosal surfaces and this dual response appears important for protection against certain pathogens. Despite the potential advantages, however, no mucosal adjuvants are currently approved for human use. Evaluating compounds as mucosal adjuvants is a slow and costly process due to the need for lengthy animal immunogenicity studies. We have constructed a library of 112 intranasal adjuvant candidate formulations consisting of oil-in-water nanoemulsions that contain various cationic and nonionic surfactants. To facilitate adjuvant development we first evaluated this library in a series of high-throughput, in vitro assays for activities associated with innate and adaptive immune activation in vivo. These in vitro assays screened for the ability of the adjuvant to bind to mucin, induce cytotoxicity, facilitate antigen uptake in epithelial and dendritic cells, and activate cellular pathways. We then sought to determine how these parameters related to adjuvant activity in vivo. While the in vitro assays alone were not enough to predict the in vivo adjuvant activity completely, several interesting relationships were found with immune responses in mice. Furthermore, by varying the physicochemical properties of the surfactant components (charge, surfactant polar head size and hydrophobicity) and the surfactant blend ratio of the formulations, the strength and type of the immune response generated (T_H1, T_H2, T_H17) could be modulated. These findings suggest the possibility of using high-throughput screens to aid in the design of custom adjuvants with unique immunological profiles to match specific mucosal vaccine applications.     

Comparison on In Vitro Characterization of Fucospheres and Chitosan Microspheres Encapsulated Plasmid DNA (pGM-CSF): Formulation Design and Release Characteristics

Granulocyte–macrophage colony-stimulating factor (GM-CSF) is a cytokine used in the treatment of serious conditions resulting from chemotherapy and bone marrow transplantation such as neutropenia and aplastic anemia. Despite these effects, GM-CSF has a very short biological half-life, and it requires frequent injection during the treatment. Therefore, the cytokine production is possible in the body with plasmid-encoded GM-CSF (pGM-CSF) coding for cytokine administered to the body. However, the selection of the proper delivery system for the plasmid is important. In this study, two different delivery systems, encapsulated plasmid such as fucoidan–chitosan (fucosphere) and chitosan microspheres, were prepared and the particle physicochemical properties evaluated. Fucospheres and chitosan microspheres size ranges are 151–401 and 376–681 nm. The zeta potential values of the microspheres were changed between 8.3–17.1 mV (fucosphere) and +21.9–28.9 mV (chitosan microspheres). The encapsulation capacity of fucospheres changed between 84.2% and 94.7% depending on the chitosan molecular weight used in the formulation. In vitro plasmid DNA release from both delivery systems exhibited slower profiles of approximately 90–140 days. Integrity of released samples was checked by agarose gel electrophoresis, and any additional band was not seen. All formulations were analyzed kinetically. The calculated regression coefficients showed a higher r ² value with zero-order kinetics. In conclusion, the characterizations of the microspheres can be modulated by changing the formulation variables, and it can be concluded that fucospheres might be a potential carrier system for the controlled delivery of GM-CSF encoding plasmid DNA.     

壳聚糖/ 魔芋葡甘露聚糖复合膜体内外促创面愈合研究

目的:制备壳聚糖/魔芋葡甘露聚糖复合膜,研究其促创面愈合作用。方法:壳聚糖溶液和魔芋葡甘露聚糖溶液混合后冷冻干燥制成复合膜。扫描电镜观察膜的形态和孔径,并研究比较膜的吸水率,水蒸气透过率,拉伸强度,断裂伸长率和体外降解率。建立大鼠皮肤损伤模型,敷以复合膜治疗,比较创面愈合率,观察创面组织染色结果,评价复合膜的促创面愈合作用。结果:壳聚糖/魔芋葡甘露聚糖复合膜具有三维网状结构,壳聚糖复合魔芋葡甘露聚糖后,膜的吸水率、拉伸强度和断裂伸长率提高,体外降解加速,水蒸气透过率改善。愈合实验表明壳聚糖/魔芋葡甘露聚糖膜具有促进创面愈合作用。结论:壳聚糖/魔芋葡甘露聚糖复合膜制备工艺简单,能有效促进创面愈合,具有成为创伤敷料的潜力。     

蛋白药物涂层支架的制备表征与体外释放研究

目的:探讨将蛋白大分子药物以较高的担载量涂层于心脏支架,并在不发生蛋白聚集的前提下实现数周之久缓释的方法.方法:将牛血清白蛋白通过稳定的水相-水相乳液技术制备成多糖玻璃体颗粒,并将多糖玻璃体颗粒分散于聚乳酸溶液中喷涂于支架表面制成蛋白涂层支架,在37°CPBs中进行体外释放动力学研究,用SEC-HPLC比较了蛋白涂层支架制备前后蛋白的聚集情况,并用扫描电镜等对蛋白涂层支架表面进行了表征.结果:蛋白涂层支架在电镜观察下外观圆整,表面光滑,制剂过程中未产生蛋白聚集,且能从涂层中缓慢释放达50天以上.结论:稳定的水相-水相乳液技术及其基础上制备的蛋白多糖玻璃体颗粒应用于心脏支架涂层上,能在有效保护蛋白构象的同时实现蛋白的缓释,为具有抗再狭窄活性蛋白应用于心脏支架提供了技术平台.     

Layer-by-Layer Assembly of Food-Grade Alginate/Chitosan Nanolaminates: Formation and Physicochemical Characterization

The alternate deposition of oppositely charged materials (layer-by-layer technique) is an effective approach to functionalize materials. Biopolymer-based nanolaminates obtained by the layer-by-layer technique can also be used to change the surface properties of food products or food contact materials. However, the final properties of nanolaminates may be affected by the conditions of the adsorbing solutions. The objective of this study was to form and characterize the physicochemical properties of nanolaminates assembled from alginate and chitosan solutions. The effect of pH, ionic strength and polysaccharide concentration on the properties of the adsorbing solutions was also evaluated. The ζ-potential, viscosity and whiteness index of the solutions were assessed before the assembly. Alginate/chitosan nanolaminates were characterized in terms of UV-visible spectroscopy, surface ζ-potential, contact angle, DSC analysis and SEM. The absorbance increased as a function of the number of polysaccharide layers on the substrate, suggesting an increase in the mass adsorbed. The surface ζ-potential of nanolaminates changed depending on the last polysaccharide deposited. Alginate layers were negatively charged, whereas chitosan layers were positively charged. Contact angles obtained in alginate layers were ≈ 10°, being mostly hydrophilic. Chitosan layers showed higher contact angle values (80°), indicating a more hydrophobic behavior. Microscopic examinations revealed the presence densely packed structures that corresponded to alginate/chitosan nanolaminates, having an estimated thickness of 700 nm. The results obtained in this work lay the basis for the rational design of polysaccharide-based nanolaminates in the food sector.     

Lyophilized Sustained Release Mucoadhesive Chitosan Sponges for Buccal Buspirone Hydrochloride Delivery: Formulation and In Vitro Evaluation

This work aims to prepare sustained release buccal mucoadhesive lyophilized chitosan sponges of buspirone hydrochloride (BH) to improve its systemic bioavailability. Chitosan sponges were prepared using simple casting/freeze-drying technique according to 3² factorial design where chitosan grade was set at three levels (low, medium, and high molecular weight), and concentration of chitosan solution at three levels (0.5, 1, and 2%). Mucoadhesion force, ex vivo mucoadhesion time, percent BH released after 8 h (Q8h), and time for release of 50% BH (T_50%) were chosen as dependent variables. Additional BH cup and core buccal chitosan sponge were prepared to achieve uni-directional BH release toward the buccal mucosa. Sponges were evaluated in terms of drug content, surface pH, scanning electron microscopy, swelling index, mucoadhesion strength, ex vivo mucoadhesion time, and in vitro drug release. Cup and core sponge (HCH 0.5E) were able to adhere to the buccal mucosa for 8 h. It showed Q8h of 68.89% and exhibited a uni-directional drug release profile following Higuchi diffusion model.KEY WORDS: buspirone HCL, casting/freeze-drying technique, chitosan, cup and core sponge, mucoadhesive buccal sponges     

Epigallocatechin Gallate/Layered Double Hydroxide Nanohybrids: Preparation,Characterization, and In Vitro Anti-Tumor Study

In recent years, nanotechnology in merging with biotechnology has been employed in the area of cancer management to overcome the challenges of chemopreventive strategies in order to gain promising results. Since most biological processes occur in nano scale, nanoparticles can act as carriers of certain drugs or agents to deliver it to specific cells or targets. In this study, we intercalated Epigallocatechin-3-Gallate (EGCG), the most abundant polyphenol in green tea, into Ca/Al-NO₃ Layered double hydroxide (LDH) nanoparticles, and evaluated its efficacy compared to EGCG alone on PC3 cell line. The EGCG loaded LDH nanohybrids were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy (TEM) and nanosizer analyses. The anticancer activity of the EGCG-loaded LDH was investigated in prostate cancer cell line (PC3) while the release behavior of EGCG from LDH was observed at pH 7.45 and 4.25. Besides enhancing of apoptotic activity of EGCG, the results showed that intercalation of EGCG into LDH can improve the anti- tumor activity of EGCG over 5-fold dose advantages in in-vitro system. Subsequently, the in-vitro release data showed that EGCG-loaded LDH had longer release duration compared to physical mixture, and the mechanism of diffusion through the particle was rate-limiting step. Acidic attack was responsible for faster release of EGCG molecules from LDH at pH of 4.25 compared to pH of 7.4. The results showed that Ca/Al-LDH nanoparticles could be considered as an effective inorganic host matrix for the delivery of EGCG to PC3 cells with controlled release properties.     

5-Fluorouracil-Loaded BSA Nanoparticles: Formulation Optimization and In Vitro Release Study

Over the past few decades, there has been considerable interest in developing protein nanoparticles as drug delivery devices. The underlying rationale is their exceptional characteristics, namely biodegradability and nonantigenicity. Herein, phase separation method was used to prepare 5-fluorouracil-loaded bovine serum albumin (BSA) nanoparticles. Drug release was tracked by continuous flow dialysis technique. Effect of process variables on loading efficiency of 5-fluorouracil was investigated and optimized through Taguchi’s M16 design with the amount of entrapped drug as response. Optimum condition was found to be 2 mg/mL of 5-fluorouracil, 3.7 mL of added ethanol, 176 μL of glutaraldehyde, drug–protein incubation time of 30 min, and pH of 8.4 for 200 mg of BSA in 2 mL drug solution. pH had the most noticeable effect on the amount of entrapped drug, but glutaraldehyde had the least. Mean diameter and zeta potential of fabricated nanoparticles under these conditions were 210 nm and −31.7 mV, respectively. Drug-loaded BSA nanoparticles suspension maintained constant release of drug for 20 h under experimental conditions, so this colloidal drug carrier is capable of releasing drug in a sustained manner.     

SMEDDS of Glyburide: Formulation, In Vitro Evaluation, and Stability Studies

The objective of the present investigation was to develop and evaluate self-microemulsifying drug delivery system (SMEDDS) for improving the delivery of a BCS class II antidiabetic agent, glyburide (GLY). The solubility of GLY in oils, cosurfactants, and surfactants was evaluated to identify the components of the microemulsion. The ternary diagram was plotted to identify the area of microemulsion existence. The in vitro dissolution profile of GLY SMEDDS was evaluated in comparison to the marketed GLY tablet and pure drug in pH 1.2 and pH 7.4 buffers. The chemical stability of GLY in SMEDDS was determined as per the International Conference on Harmonisation guidelines. The area of microemulsion existence increased with the increase in the cosurfactant (Transcutol P) concentration. The GLY microemulsion exhibited globule size of 133.5 nm and polydispersity index of 0.94. The stability studies indicated that GLY undergoes significant degradation in the developed SMEDDS. This observation was totally unexpected and has been noticed for the first time. Further investigations indicated that the rate of GLY degradation was highest in Transcutol P.     

Formulation and In Vitro,In Vivo Evaluation of Effervescent Floating Sustained-Release Imatinib Mesylate Tablet

Introduction

Imatinib mesylate is an antineoplastic agent which has high absorption in the upper part of the gastrointestinal tract (GIT). Conventional imatinib mesylate (Gleevec) tablets produce rapid and relatively high peak blood levels and requires frequent administration to keep the plasma drug level at an effective range. This might cause side effects, reduced effectiveness and poor therapeutic management. Therefore, floating sustained-release Imatinib tablets were developed to allow the tablets to be released in the upper part of the GIT and overcome the inadequacy of conventional tablets.

Methodology

Floating sustained-release Imatinib mesylate tablets were prepared using the wet granulation method. Tablets were formulated using Hydroxypropyl Methylcellulose (HPMC K4M), with Sodium alginate (SA) and Carbomer 934P (CP) as release-retarding polymers, sodium bicarbonate (NaHCO₃) as the effervescent agent and lactose as a filler. Floating behavior, in vitro drug release, and swelling index studies were conducted. Initial and total drug release duration was compared with a commercial tablet (Gleevec) in 0.1 N HCl (pH 1.2) at 37 ± 0.5°C for 24 hours. Tablets were then evaluated for various physical parameters, including weight variation, thickness, hardness, friability, and drug content. Consequently, 6 months of physical stability studies and in vitro gastro-retentive studies were conducted.

Results and Discussion

Statistical data analysis revealed that tablets containing a composition of 14.67% w/w HPMC K4M, 10.67%, w/w Na alginate, 1.33%, w/w Carbomer 934P and 9.33%, w/w NaHCO₃ produced the most favorable formulation to develop 24-hour sustained-release tablets with optimum floating behavior and satisfactory physicochemical characteristics. Furthermore, in vitro release study revealed that the formulated SR tablet had significantly lower C_max and higher T_max compared to the conventional tablet (Gleevec). Thus, formulated SR tablets preserved persistent concentration of plasma up to 24 hours.

Conclusion

In conclusion, in order to suggest a better drug delivery system with constant favorable release, resulting in optimized absorption and less side effects, formulated CP-HPMC-SA based imatinib mesylate floating sustained-release tablets can be a promising candidate for cancer chemotherapy.     

In Vitro and In Vivo Characterization of Pyocin

Pyocin, a bacteriocin obtained from lysates of ultraviolet-induced cultures of Pseudomonas aeruginosa was characterized in vitro and in vivo after 1,000-fold purification by chemical, column, and differential centrifugation procedures. Electron micrographs of negatively stained pyocin preparations contained rod-shaped particles which resembled the contractile tail protein of the T-even phages of Escherichia coli. Although two separate and distinct pyocin fractions were eluted from diethylaminoethyl cellulose (pH 7.5) during the purification procedure, the particles appeared identical. In addition, the two fractions exhibited a close correlation between their titers and the particle numbers as observed in the electron microscope. The particles were approximately 20 by 90 mmu with a core diameter of 5 mmu and a sheath length of 50 mmu. Neither intact phage nor ghosts were seen in any of the preparations, although ringlets of two different diameters, which appeared to correspond to the diameters of the sheath and inner core, were observed. Other studies indicated that, although crude preparations were stable to freezing and thawing, purified preparations lost all of their activity under similar treatment. However, the addition of 50% glycerol to purified preparations completely protected activity. Conversely, aged normal human or rabbit sera enhanced the antibacterial activity of pyocin approximately fourfold, although serum albumin and hemoglobin had no effect. In vivo studies indicated that purified pyocin was not lethal for mice when injected intraperitoneally in concentrations of 28,000 to 1,400,000 units (5.6 to 276 mug of protein), nor was 7,200 to 36,000 units dermonecrotic for rabbits.     

Solvent-Free Synthesis,Characterization, and In Vitro Biological Activity Study of Xanthenediones and Acridinediones

Russian Journal of Bioorganic Chemistry - The present work highlights the broad range of oxygen and nitrogen heterocycles and their applications in medicinal field. A facial approach has been...     

Formulation of Dacarbazine-loaded Cubosomes. Part III. Physicochemical Characterization

The purpose of this study was to investigate the physicochemical properties of dacarbazine-loaded cubosomes. The drug-loaded cubosome nanocarriers were prepared by a fragmentation method and then freeze dried. They were then characterized for size, morphology, thermal behavior, and crystallography using dynamic light scattering, transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD), respectively. The drug loading and encapsulation efficiency were determined by UV spectrophotometry. The results showed that the prepared dacarbazine-loaded cubosomes had mean diameters ranging from 86 to 106 nm. In addition to the TEM, the characteristic peaks from PXRD data suggested that the freeze-dried nanoformulations were indeed cubic in nature. DSC and PXRD analysis suggested the 0.06 or 0.28% w/w actual drug loaded inside cubosomes was in the amorphous or molecular state. These physicochemical characteristics would affect the nanoformulation shelf-life, efficacy, and safety.     

In Vivo,In Vitro,and In Silico Characterization of Peptoids as Antimicrobial Agents

Bacterial resistance to conventional antibiotics is a global threat that has spurred the development of antimicrobial peptides (AMPs) and their mimetics as novel anti-infective agents. While the bioavailability of AMPs is often reduced due to protease activity, the non-natural structure of AMP mimetics renders them robust to proteolytic degradation, thus offering a distinct advantage for their clinical application. We explore the therapeutic potential of N-substituted glycines, or peptoids, as AMP mimics using a multi-faceted approach that includes in silico, in vitro, and in vivo techniques. We report a new QSAR model that we developed based on 27 diverse peptoid sequences, which accurately correlates antimicrobial peptoid structure with antimicrobial activity. We have identified a number of peptoids that have potent, broad-spectrum in vitro activity against multi-drug resistant bacterial strains. Lastly, using a murine model of invasive S. aureus infection, we demonstrate that one of the best candidate peptoids at 4 mg/kg significantly reduces with a two-log order the bacterial counts compared with saline-treated controls. Taken together, our results demonstrate the promising therapeutic potential of peptoids as antimicrobial agents.     

Liposomal Oxymatrine in Hepatic Fibrosis Treatment: Formulation,In Vitro and In Vivo Assessment

The aim was to develop a liposomal oxymatrine conjugating d-alpha tocopheryl polyethylene glycol 1000 succinate (OMT-LIP) for enhanced therapeutics of hepatic fibrosis. OMT-LIP was prepared using the remote loading method. The influences of formulation compositions on the encapsulation efficiency of OMT-LIP were investigated. Mean particle size, zeta potential, morphology, in vitro release, fibrotic liver targeting, and therapeutics of OMT-LIP were thoroughly assessed. The intraliposomal buffer composition and concentration, extraliposomal phase composition and pH, types of phospholipid, lipid molar ratio composition, and theoretical drug loading are crucial factors to entrap OMT into liposomes. The optimum OMT-LIP presented spherically unilamellar microstructures with entrapment efficiency of 79.7 ± 3.9%, mean particle size of 121.6 ± 52.9 nm, and zeta potential of −5.87 mV. OMT-LIP significantly increased the accumulation of OMT in the fibrotic liver with an 11.5-fold greater AUC than OMT solution in the dimethylnitrosamine (DMN)-induced hepatic fibrosis animals. OMT-LIP could be a potential strategy to improve treatment outcomes for hepatic fibrosis, showing the protective effects to mice given CCl₄ and the enhanced therapeutics to mice with either DMN or CCl₄-induced hepatic fibrosis.KEY WORDS: fibrotic liver targeting, hepatic fibrosis, liposomes, oxymatrine, therapeutics     

Physicochemical Characterization and In Vitro Digestibility Study of an In Silico Designed Recombinant Protein Enriched with Large Neutral Amino Acids and Lacking Phenylalanine for Phenylketonuria

The Protein Journal - In our previous study, a 3D structure of LNAA66 model protein containing 4–5 α-helices, high large neutral amino acids (LNAA) and lacking phenylalanine was...     

Cytotoxicity and Antioxidative Effects of Herbal and Fruit Extracts In Vitro

Many studies have been carried out on bioactivities of individual herbs/fruits using in cosmetics or as a diet products, however, no collective study on their comparative antioxidant activities against oxidative damage or on cytotoxicity effect has been reported. The aim of this work was study the cytotoxicity and antioxidative activity of eight extracts with hypothetical antioxidative influence in vitro. To further elucidate of a possible role of herbals/fruits extracts on cell protection was used on the healthy and UV-A damaged mouse fibroblast cells. The cell viability was detect using MTT assay. Kinetic production of reactive oxygen species, identification of cell death, cell cycle and gene expression C-FOS were measured. Intracellular and mitochondrial transmembrane potential was evaluate with JC-1 fluorescence probe. Comet assay was employed to detect the UV-A induced DNA damage. The results indicated that using the extracts decreased ROS production. It can lead to greatly enhance and promote the viability of cells. As the most effective antioxidant in quenching of the ROS, in cell viability and DNA presentation was determined Prunella Vulgaris. However, one of them (Wheat Germ Oil) caused increased production of ROS and low cell viability.     

Formulation and In Vitro Evaluation of Salbutamol Sulphate In Situ Gelling Nasal Inserts

The aim of this study was to formulate salbutamol sulfate (SS), a model drug, as mucoadhesive in situ gelling inserts having a high potential as nasal drug delivery system bypassing the first-pass metabolism. In situ gelling inserts, each containing 1.4% SS and 2% gel-forming polymer, hydroxypropyl methylcellulose (HPMC), carboxymethylcellulose sodium (CMC Na), sodium alginate (AL), and chitosan (CH) were prepared. The inserts were investigated for their different physicochemical properties. The weight of inserts was 16–27 mg, drug content was 3.9–4.2 mg, thickness ranged between 15 and 28 μm and surface pH was 5–7. Cumulative drug released from the inserts exhibited extended release for more than 10 h following the decreasing order: CH > AL > CMC Na > HPMC. The drug release from CMC Na and AL inserts followed zero-order kinetics while HPMC and CH inserts exhibited non-Fickian diffusion mechanism. The inserts exhibited different water uptake (7–23%) with the smallest values for CH. Differential scanning calorimetry study pointed out possible interaction of SS and oppositely charged anionic polymers (CMC Na and AL). The mucoadhesive in situ gelling inserts exhibited satisfactory mucoadhesive and extended drug release characteristics. The inserts could be used for nasal delivery of SS over about 12 h; bypassing the hepatic first-pass metabolism without potential irritation.KEY WORDS: in situ gelling inserts, mucoadhesion, nasal delivery, salbutamol sulfate     

Microemulsion-Based Vaginal Gel of Clotrimazole: Formulation, In Vitro Evaluation, and Stability Studies

The objective of the present investigation was to develop and evaluate microemulsion-based gel for the vaginal delivery of clotrimazole (CMZ). The solubility of CMZ in oils and surfactants was evaluated to identify components of the microemulsion. The ternary diagram was plotted to identify the area of microemulsion existence. Various gelling agents were evaluated for their potential to gel the CMZ microemulsion without affecting its structure. The bioadhesive potential and antifungal activity of the CMZ microemulsion-based gel (CMZ-MBG) was determined in comparison to the marketed clotrimazole gel (Candid-V® gel) by in vitro methods. The chemical stability of CMZ in CMZ-MBG was determined as per the International Conference on Harmonization guidelines. The CMZ microemulsion exhibited globule size of 48.4 nm and polydispersity index of 0.75. Carbopol® ETD 2020 could successfully gel the CMZ microemulsion without disturbing the structure. The CMZ-MBG showed significantly higher (P < 0.05) in vitro bioadhesion and antifungal activity as compared to that of Candid-V® gel. The stability studies indicated that CMZ undergoes acidic pH-catalyzed degradation at all the storage conditions at the end of 3 months.Key words: clotrimazole, microemulsion, microemulsion-based vaginal gel, stability studies, vaginal delivery