Biomimetic catalysis for hemicellulose hydrolysis in corn stover

Efficient and economical hydrolysis of plant cell wall polysaccharides into monomeric sugars is a significant technical hurdle in biomass processing for renewable fuels and chemicals. One possible approach to overcoming this hurdle is a biomimetic approach with dicarboxylic acid catalyst mimicking the catalytic core microenvironment in natural enzymes. This paper reports developments in the use of a dicarboxylic acid catalyst, maleic acid, for hemicellulose hydrolysis in corn stover. Hemicellulose hydrolysis and xylose degradation kinetics in the presence of maleic acid was compared to sulfuric acid. At optimized reaction conditions for each acid, maleic acid hydrolysis results in minimal xylose degradation, whereas sulfuric acid causes 3-10 times more xylose degradation. These results formed the basis for optimizing the hydrolysis of hemicellulose from corn stover using maleic acid. At 40 g/L dry corn stover solid-loading, both acid catalysts can achieve near-quantitative monomeric xylose yield. At higher solids loadings (150-200 g dry stover per liter), sulfuric acid catalyzed hydrolysis results in more than 30% degradation of the xylose, even under the previously reported optimal condition. However, as a result of minimized xylose degradation, optimized biomimetic hydrolysis of hemicellulose by maleic acid can reach approximately 95% monomeric xylose yields with trace amounts of furfural. Fermentation of the resulting unconditioned hydrolysate by recombinant S. cerevisiae results in 87% of theoretical ethanol yield. Enzyme digestibility experiments on the residual corn stover solids show that >90% yields of glucose can be produced in 160 h from the remaining cellulose with cellulases (15 FPU/g-glucan).     

Kinetic study for Fe(NO3)3 catalyzed hemicellulose hydrolysis of different corn stover silages

Five inorganic salts, ZnCl(2), FeSO(4), Fe(2)(SO(4))(3), FeCl(3) and Fe(NO(3))(3) were chosen as catalysts to determine their effects on hemicellulose hydrolysis in control silage (no silage additive), and the results indicated that Fe(NO(3))(3) was the most efficient catalyst for hemicellulose hydrolysis. The kinetics of Fe(NO(3))(3) catalyzed hydrolysis for control silage and acid silage (treatment with HNO(3)) were investigated at various pretreatment conditions. The results demonstrated that Saeman model was well consistent with Fe(NO(3))(3) catalyzed hydrolysis reaction for corn stover silage, and kinetic parameters for this model were developed by the Arrhenius equation. Optimum pretreatment conditions were 0.05 M Fe(NO(3))(3) at 150°C for 21.2 min for control silage and 12.7 min for acid silage, which obtained the maximum xylose yields 81.66% and 93.36% of initial xylan, respectively. The activation energies for hemicellulose hydrolysis in control and acid silage ranged from 44.35 to 86.14 kJ/mol and from 3.11 to 34.11 kJ/mol, respectively.     

Alkali treatment of corn stover to improve sugar production by enzymatic hydrolysis

Alkali treatment of corn stover improves the avaliability of cellulose and hemicellulose for enzymatic attack. Treatments were carried out for 1 to 60 min at temperatures and NaOH concentrations ranging from 100 to 150 degrees C and 0 to 2%, respectively. Solubilization of the stover and sugar production by enzymatic hydrolysis (Trichoderma viride cellulase) of the solid residue and the dissolved solids were used to measure the effect of caustic treatment. At 150 degrees C and 2% NaOH concentration, 65% of the original stover was dissolved after 5 min and 52% saccharificatin (g sugar/g stover) of the residue and dissolved solids by enzymatic hydrolysis was achieved compared to 20% for untreated corn stover.     

Effect of hemicellulose and lignin removal on enzymatic hydrolysis of steam pretreated corn stover

Ethanol can be produced from lignocellulosic biomass using steam pretreatment followed by enzymatic hydrolysis and fermentation. The sugar yields, from both hemicellulose and cellulose are critical parameters for an economically-feasible ethanol production process. This study shows that a near-theoretical glucose yield (96-104%) from acid-catalysed steam pretreated corn stover can be obtained if xylanases are used to supplement cellulases during hydrolysis. Xylanases hydrolyse residual hemicellulose, thereby improving the access of enzymes to cellulose. Under these conditions, xylose yields reached 70-74%. When pre-treatment severity was reduced by using autocatalysis instead of acid-catalysed steam pretreatment, xylose yields were increased to 80-86%. Partial delignification of pretreated material was also evaluated as a way to increase the overall sugar yield. The overall glucose yield increased slightly due to delignification but the overall xylose yield decreased due to hemicellulose loss in the delignification step. The data also demonstrate that steam pretreatment is a robust process: corn stover from Europe and North America showed only minor differences in behaviour.     

Kinetic studies of corn stover saccharification using sulphuric acid

The kinetics of crystalline cellulose and hemicellulose hydrolysis in corn stover were studied with a nonisothermal technique. Reactions were arrested at temperatures between 160 and 240 degrees C and product sugars were analyzed using a Bio-Rad HPX-85 liquid chromatographic column. A simple first-order series reaction model was used for both cellulose and hemicellulose hydrolysis reactions. Kinetic parameters were obtained for three different sulphuric acid concentrations (0.49, 0.92, and 1.47 wt %). Activation energies remained constant over this acid concentration range but the preexponential factors showed an increase with acid concentration. Relationships were obtained between the preexponential factors and acid concentrations. Cellulose hydrolysis and glucose degradation reactions were observed to be of higher order with respect to acid concentration in comparison with the previous studies with other raw materials.     

Development and validation of a kinetic model for enzymatic saccharification of lignocellulosic biomass

A multireaction kinetic model was developed for closed-system enzymatic hydrolysis of lignocellulosic biomass such as corn stover. Three hydrolysis reactions were modeled, two heterogeneous reactions for cellulose breakdown to cellobiose and glucose and one homogeneous reaction for hydrolyzing cellobiose to glucose. Cellulase adsorption onto pretreated lignocellulose was modeled via a Langmuir-type isotherm. The sugar products of cellulose hydrolysis, cellobiose and glucose, as well as xylose, the dominant sugar prevalent in most hemicellulose hydrolyzates, were assumed to competitively inhibit the enzymatic hydrolysis reactions. Model parameters were estimated from experimental data generated using dilute acid pretreated corn stover as the substrate. The model performed well in predicting cellulose hydrolysis trends at experimental conditions both inside and outside the design space used for parameter estimation and can be used for in silico process optimization.     

Partial flow of compressed-hot water through corn stover to enhance hemicellulose sugar recovery and enzymatic digestibility of cellulose

Flowthrough pretreatment with compressed-hot water can significantly increase the removal of xylan and lignin and enhance xylose sugar yields and cellulose digestibility, especially at high flow rates. However, continuous flowthrough operations that realize these benefits suffer from a large amount of water consumption that leads to high energy requirements for pretreatment and downstream processing. Because high flow rates are particularly effective early in hemicellulose hydrolysis and less effective later, flow with compressed-hot water was applied at selected intervals, and performance was compared with that of batch and flowthrough operations for corn stover pretreated with compressed-hot water at 200 degrees C. Partial flow reduced water consumption by 60% compared with continuous flowthrough operation but still achieved higher xylose sugar yields (84-89%) compared to batch pretreatment (46.6%). In addition, corn stover cellulose pretreated by partial flow had higher enzymatic digestibility (88-90%) than batch operations (approximately 85%) at otherwise identical conditions, apparently due to much higher lignin removal for the former (40-45% vs 10-12%). Partial flow also reduced degradation, with recovery of xylose and glucose in the solids and hydrolyzate increased to 90-92% vs only about 76% for batch operation. The partial flow approach could be further improved by optimizing the operating strategy and reaction conditions, suggesting that this novel pretreatment could lead to advanced biomass pretreatment technology.     

Dilute acid hydrolysis of wheat straw hemicellulose at moderate temperature: a simplified kinetic model

Wheat straw has been hydrolized with sulfuric acid at 34 and 90 degrees C. The treatment at 90 degrees C yields complete solubilization of hemicellulose to xylose and arabinose without significant amounts of furfural. The influence of acid concentration was studied and the kinetics of the acid-catalyzed hydrolysis has been modeled suggesting a two-consecutive reactions mechanism. This model is useful to explain the different behavior of the concentration of the two main sugars produced. The enhanced cellulose accessibility to enzymatic attack is also reported.     

Production of ethanol from corn stover hemicellulose hydrolyzate using <Emphasis Type="Italic">Pichia stipitis</Emphasis>

Hemicellulose liquid hydrolyzate from dilute acid pretreated corn stover was fermented to ethanol using Pichia stipitis CBS 6054. The fermentation rate increased with aeration but the pH also increased due to consumption of acetic acid by Pichia stipitis. Hemicellulose hydrolyzate containing 34 g/L xylose, 8 g/L glucose, 8 g/L Acetic acid, 0.73 g/L furfural, and 1 g/L hydroxymethyl furfural was fermented to 15 g/L ethanol in 72 h. The yield in all the hemicellulose hydrolyzates was 0.37–0.44 g ethanol/g (glucose + xylose). Nondetoxified hemicellulose hydrolyzate from dilute acid pretreated corn stover was fermented to ethanol with high yields, and this has the potential to improve the economics of the biomass to ethanol process.     

Effect of structural features on enzyme digestibility of corn stover

Corn stover was pretreated with excess calcium hydroxide (0.5 g Ca(OH)2/g raw biomass) in non-oxidative and oxidative conditions at 25, 35, 45, and 55 degrees C. The enzymatic digestibility of lime-treated corn stover was affected by the change of structural features (acetylation, lignification, and crystallization) resulting from the treatment. Extensive delignification required oxidative treatment and additional consumption of lime (up to 0.17 g Ca(OH)2/g biomass). Deacetylation reached a plateau within 1 week and there were no significant differences between non-oxidative and oxidative conditions at 55 degrees C; both conditions removed approximately 90% of the acetyl groups in 1 week at all temperatures studied. Delignification highly depended on temperature and the presence of oxygen. Lignin and hemicellulose were selectively removed (or solubilized), but cellulose was not affected by lime pretreatment in mild temperatures (25-55 degrees C), even though corn stover was contacted with alkali for a long time, 16 weeks. The degree of crystallinity slightly increased from 43% to 60% with delignification because amorphous components (lignin, hemicellulose) were removed. However, the increased crystallinity did not negatively affect the 3-d sugar yield of enzymatic hydrolysis. Oxidative lime pretreatment lowered the acetyl and lignin contents to obtain high digestibility, regardless of crystallinity. The non-linear models for 3-d hydrolysis yields of glucan (Y(g)), xylan (Y(x)), and holocellulose (Y(gx)) were empirically established as a function of the residual lignin (L) for the corn stover pretreated with lime and air.     

A novel mechanism and kinetic model to explain enhanced xylose yields from dilute sulfuric acid compared to hydrothermal pretreatment of corn stover

Pretreatment of corn stover in 0.5% sulfuric acid at 160 °C for 40 min realized a maximum monomeric plus oligomeric xylose yield of 93.1% compared to a maximum of only 71.5% for hydrothermal (no added mineral acid) pretreatment at 180 °C for 30 min. To explain differences in dilute acid and hydrothermal yields, a fast reacting xylan fraction (0.0889) was assumed to be able to directly form monomeric xylose while a slow reacting portion (0.9111) must first form oligomers during hydrothermal pretreatment. Two reactions to oligomers were proposed: reversible from fast reacting xylan and irreversible from slow reacting xylan. A kinetic model and its analytical solution simulated xylan removal data well for dilute acid and hydrothermal pretreatment of corn stover. These results suggested that autocatalytic reactions from xylan to furfural in hydrothermal pretreatment were controlled by oligomeric xylose decomposition, while acid-catalytic reactions in dilute acid pretreatment were controlled by monomeric xylose decomposition.     

Lime pretreatment and enzymatic hydrolysis of corn stover

Corn stover was pretreated with an excess of calcium hydroxide (0.5 g Ca(OH)2/g raw biomass) in non-oxidative and oxidative conditions at 25, 35, 45, and 55 degrees C. The optimal condition is 55 degrees C for 4 weeks with aeration. Glucan (91.3%) and xylan (51.8%) were converted to glucose and xylose respectively, when the treated corn stover was enzymatically hydrolyzed with 15 FPU/g cellulose. Only 0.073 g Ca(OH)2 was consumed per g of raw corn stover. Of the initial lignin, 87.5% was maximally removed. Almost all acetyl groups were removed. After 4 weeks at 55 degrees C with aeration, some cellulose and hemicellulose were solubilized as monomers and oligomers in the pretreatment liquor. When considering the dissolved fragments of glucan and xylan in the pretreatment liquor, the overall yields of glucose and xylose were 93.2% and 79.5% at 15 FPU/g cellulose. The pretreatment liquor has no inhibitory effect on ethanol fermentation.     

Influence of physico-chemical changes on enzymatic digestibility of ionic liquid and AFEX pretreated corn stover

Ionic liquid (IL) and ammonia fiber expansion (AFEX) pretreatments were studied to develop the first direct side-by-side comparative assessment on their respective impacts on biomass structure, composition, process mass balance, and enzymatic saccharification efficiency. AFEX pretreatment completely preserves plant carbohydrates, whereas IL pretreatment extracts 76% of hemicellulose. In contrast to AFEX, the native crystal structure of the recovered corn stover from IL pretreatment was significantly disrupted. For both techniques, more than 70% of the theoretical sugar yield was attained after 48 h of hydrolysis using commercial enzyme cocktails. IL pretreatment requires less enzyme loading and a shorter hydrolysis time to reach 90% yields. Hemicellulase addition led to significant improvements in the yields of glucose and xylose for AFEX pretreated corn stover, but not for IL pretreated stover. These results provide new insights into the mechanisms of IL and AFEX pretreatment, as well as the advantages and disadvantages of each.     

The effect of bovine serum albumin on batch and continuous enzymatic cellulose hydrolysis mixed by stirring or shaking

Bovine serum albumin (BSA) was applied as a model non-catalytic protein to enzymatic hydrolysis of Avicel and dilute acid pretreated corn stover at different reaction conditions to improve the understanding of its ability to enhance cellulose hydrolysis. Addition of BSA improved the 72 h hydrolysis yields in shake flasks by up to 26% for both substrates by reducing de-activation of the exoglucanases and by facilitating reductions in particle size and crystallinity during a magnetically stirred pre-incubation step. The enzyme stabilizing effect of BSA addition was most striking for batch hydrolysis in a stirred tank reactor, with glucose yields increasing by 76% after 72 h for Avicel and by 40% after 145 h for corn stover. Application of BSA to continuous hydrolysis for a mean residence time of 24h gave 33% and 40% higher glucose yields for corn stover and Avicel compared to the controls.     

Dilute-acid hydrolysis for fermentation of the Bolivian straw material Paja Brava

Hydrolysis of the straw material Paja Brava, a sturdy grass characteristic for the high plains of Bolivia, was studied in order to find suitable conditions for hydrolysis of the hemicellulose and cellulose parts. Dried Paja Brava material was pre-steamed, impregnated with dilute sulfuric acid (0.5% or 1.0% by wt), and subsequently hydrolyzed in a reactor at temperatures between 170 and 230 degrees C for a reaction time between 3 and 10 min. The highest yield of xylose (indicating efficient hydrolysis of hemicellulose) were found at a temperature of 190 degrees C, and a reaction time of 5-10 min, whereas considerably higher temperatures (230 degrees C) were needed for hydrolysis of cellulose. Fermentability of hemicellulose hydrolyzates was tested using the xylose-fermenting yeast species Pichia stipitis, Candida shehatae and Pachysolen tannophilus. The fermentability of hydrolyzates decreased strongly for hydrolyzates produced at temperatures higher than 200 degrees C.     

Performance of a newly developed integrant of Zymomonas mobilis for ethanol production on corn stover hydrolysate

Efficient conversion of lignocellulosic biomass requires biocatalysts able to tolerate inhibitors produced by many pretreatment processes. Recombinant Zymomonas mobilis 8b, a recently developed integrant of Zymomonas mobilis 31821(pZB5), tolerated acetic acid up to 16 g l(-1) and achieved 82%-87% (w/w) ethanol yields from pure glucose/xylose solutions at pH 6 and temperatures of 30 degrees C and 37 degrees C. An ethanol yield of 85% (w/w) was achieved on glucose/xylose from hydrolysate produced by dilute sulfuric acid pretreatment of corn stover after an overliming' process was used to improve hydrolysate fermentability.     

Combined sugar yields for dilute sulfuric acid pretreatment of corn stover followed by enzymatic hydrolysis of the remaining solids

A number of previous studies determined dilute acid pretreatment conditions that maximize xylose yields from pretreatment or glucose yields from subsequent digestion of the pretreated cellulose, but our emphasis was on identifying conditions to realize the highest yields of both sugars from both stages. Thus, individual xylose and glucose yields are reported as a percentage of the total potential yield of both sugars over a range of sulfuric acid concentrations of 0.22%, 0.49% and 0.98% w/w at 140, 160, 180 and 200 degrees C. Up to 15% of the total potential sugar in the substrate could be released as glucose during pretreatment and between 15% and 90+% of the xylose remaining in the solid residue could be recovered in subsequent enzymatic hydrolysis, depending on the enzyme loading. Glucose yields increased from as high as 56% of total maximum potential glucose plus xylose for just enzymatic digestion to 60% when glucose released in pretreatment was included. Xylose yields similarly increased from as high as 34% of total potential sugars for pretreatment alone to between 35% and 37% when credit was taken for xylose released in digestion. Yields were shown to be much lower if no acid was used. Conditions that maximized individual sugar yields were often not the same as those that maximized total sugar yields, demonstrating the importance of clearly defining pretreatment goals when optimizing the process. Overall, up to about 92.5% of the total sugars originally available in the corn stover used could be recovered for coupled dilute acid pretreatment and enzymatic hydrolysis. These results also suggest that enhanced hemicellulase activity could further improve xylose yields, particularly for low cellulase loadings.     

Evaluation of organosolv processes for the fractionation and modification of corn stover for bioconversion

Corn stover was pretreated for compositional fractionation and structural modification for maximum conversion of carbohydrate to soluble sugars. The process scheme consisted of three steps: (1) mild prehydrolysis in dilute sulfuric acid, (2) delignification with various organosolv solvents, and (3) enzymatic hydrolysis in an agitated bead reactor. Prehydrolysis of corn stover can be achieved at temperatures ranging from 95 to 120 degrees C, which is a much milder condition than must be applied to wood. Various organosolv solvents, including several alcohols with acid as catalyst, ethylene glycol, and its derivatives, and amines were used for delignification of the prehydrolyzed corn stover. Aromatic alcohols were found to be more effective in solubilizing the prehydrolyzed corn stover than were the aliphatic alcohols. Butanol was the most effective among the aliphatic alcohols; on the other hand, phenol was the best among the aromatic alcohols. Ethylene glycol, methylcellosolv, and ethylcellosolv were effective in solubilizing the prehydrolyzed corn stover but not for enhancing the enzymatic hydrolysis. Various amines achieved delignification at the mild temperature of 95 degrees C, but they tended to solubilize substantial amounts of carbohydrate in addition to lignin. n-Butylamine was effective in enhancing the conversion during enzymatic hydrolysis; it was a good delignifying agent as well as one that achieved a concomitant swelling of the cellulose structure. The low enzymic conversion (20-37%) of prehydrolyzed and solvent-extracted corn stover that was achieved implies that lignin is not the only major barrier for enzymatic hydrolysis. Modification of cellulose structure also should be accomplished to achieve a high degree of conversion. Enzymatic hydrolysis in the agitated bead system increased the rate and extent of conversion of corn stover substantially compared to systems without beads.     

Differential effects of mineral and organic acids on the kinetics of arabinose degradation under lignocellulose pretreatment conditions

Sugar degradation occurs during acid-catalyzed pretreatment of lignocellulosic biomass at elevated temperatures, resulting in degradation products that inhibit microbial fermentation in the ethanol production process. Arabinose, the second most abundant pentose in grasses like corn stover and wheat straw, degrades into furfural. This paper focuses on the first-order rate constants of arabinose (5 g/L) degradation to furfural at 150 and 170 °C in the presence of sulfuric, fumaric, and maleic acid and water alone. The calculated degradation rate constants (k_d) showed a correlation with the acid dissociation constant (pK_a), meaning that the stronger the acid, the higher the arabinose degradation rate. However, de-ionized water alone showed a catalytic power exceeding that of 50 mM fumaric acid and equaling that of 50 mM maleic acid. This cannot be explained by specific acid catalysis and the shift in pK_w of water at elevated temperatures. These results suggest application of maleic and fumaric acid in the pretreatment of lignocellulosic plant biomass may be preferred over sulfuric acid. Lastly, the degradation rate constants found in this study suggest that arabinose is somewhat more stable than its stereoisomer xylose under the tested conditions.     

Improved ethanol yield and reduced Minimum Ethanol Selling Price (MESP) by modifying low severity dilute acid pretreatment with deacetylation and mechanical refining: 1) Experimental

ABSTRACT: BACKGROUND: Historically, acid pretreatment technology for the production of bio-ethanol from corn stover has required severe conditions to overcome biomass recalcitrance. However, the high usage of acid and steam at severe pretreatment conditions hinders the economic feasibility of the ethanol production from biomass. In addition, the amount of acetate and furfural produced during harsh pretreatment is in the range that strongly inhibits cell growth and impedes ethanol fermentation. The current work addresses these issues through pretreatment with lower acid concentrations and temperatures incorporated with deacetylation and mechanical refining. RESULTS: The results showed that deacetylation with 0.1 M NaOH before acid pretreatment improved the monomeric xylose yield in pretreatment by up to 20 % while keeping the furfural yield under 2 %. Deacetylation also improved the glucose yield by 10 % and the xylose yield by 20 % during low solids enzymatic hydrolysis. Mechanical refining using a PFI mill further improved sugar yields during both low- and high-solids enzymatic hydrolysis. Mechanical refining also allowed enzyme loadings to be reduced while maintaining high yields. Deacetylation and mechanical refining are shown to assist in achieving 90 % cellulose yield in high-solids (20 %) enzymatic hydrolysis. When fermentations were performed under pH control to evaluate the effect of deacetylation and mechanical refining on the ethanol yields, glucose and xylose utilizations over 90 % and ethanol yields over 90 % were achieved. Overall ethanol yields were calculated based on experimental results for the base case and modified cases. One modified case that integrated deacetylation, mechanical refining, and washing was estimated to produce 88 gallons of ethanol per ton of biomass. CONCLUSION: The current work developed a novel bio-ethanol process that features pretreatment with lower acid concentrations and temperatures incorporated with deacetylation and mechanical refining. The new process shows improved overall ethanol yields compared to traditional dilute acid pretreatment. The experimental results from this work support the techno-economic analysis and calculation of Minimum Ethanol Selling Price (MESP) detailed in our companion paper.